Activation of CRM RDS with ERP integration impact on existing ERP configuration

Hi,
I'm doing automatic content activation (via Solution Builder) of the CRM RDS solution with ERP integration. The CRM system is a new installation which will linked to an existing ERP system.
Will the activation of RDS Solution content overwrite the existing configuration in ERP? What is impact of on existing configuration and existing process on ERP?
Regards,
SK

1. The add-on seems to support all new versions of ECC, does this include ECC on HANA ? --> The add-on supports all release of ECC above the base release mentioned in the Integration guide, including ECC on HANA
2. Is it necessary to backup the environment before installing the add-on ? --> The Add-On does not contain any DB tables. It should not interfere with the ECC environment, so you can install these without any disruption or downtime. As part of general hygiene, you may want to make sure that there is a recent enough backup for the ECC system.
3. The component seems to be isolated from impacting any ECC functionality and its just for the purpose of integrating C4C with ECC. Would this mean that no regression testing is required in ECC ?
No regression testing is required for ECC standard functionality. It will not affect existing distribution models. You will have to set up new ones for Cloud for Customer Integration scenarios.
4. The component doesn't seems to have an uninstall option which would meant that any reverts could only be done through system backup only. Is this accurate ? --> There is no uninstall option.

Similar Messages

Integration of CRM calendar with groupware calendar

Hello,
Please help me understand what all is required to do integration of CRM calendar with groupware integration.
I want to show CRM calendar on the Portal. what would be the right approach.
Thanks in advance
Mona

Hi Gregor,
Thanks for your reply.
Unfortunately we do not have PC-UI in the current environment.
Is there any other way to accomplish this?
Best Regards,
Mona

ERP Integrator

Hi all,
We have requirement to load data from oracle GL to Hyperion planning by using ERP integrator and ODI.
We configured the source system in ERP integrator and ODI.
When we try to Intialize the source system in ERP integrator,we are getting error in ODI operator "Table or View does not exists"
Thanks

Hi Murali,
1. I have faced this issue recently ,and the solution is very simple .Go to your browser -> internet settings -> language settings -> add english US here .
2. Restart the ERP services, and check after logging into workspace , if you still have $
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

SMSY define ERP system with Process Integration instance

Hello,
We have connected new installed ERP system (ERP 6.0 EHP3) to central SLD (SAP SM EHP1).
But we can see the strange situation.
SMSY define automatically this ERP system as the system with Process Integration instance but not ECC Server instance.
We have not installed Usage Type PI in the ERP system.
Also we have old ERP system in SLD. It is visible as SAP ERP system with ECC Server instance.
What is the strange behaviour of SMSY? What should we do and how can we correct this definition in SMSY?

Hi,
Check what you have selected as "Main Instance" in SMSY under tab Software Components.
Follow this link.
http://help.sap.com/saphelp_smehp1/helpdata/en/84/24f94a1ae44a14b83529f5890a6ff5/content.htm
Hope this helps.
Feel free to revert back.
-=-Ragu

Where is Integration Status field is to Sync CRM OD with EBS

Hi All,
I am new to CRM OD.
We are using PIP to integrate CRM OD with EBS.
How can we mark the new account being created to be sync with EBS. I dont see any field as such.
Thanks
Sai

Hi,
According to your description, my understanding is that you want to sync the user between CRM system and SharePoint.
I suggest you can use Client Object Model to add user to group.
For the error message, you need to load the groupcollection firstly before you loop it like below:
ClientContext ctx = new ClientContext(“http://foo”);
//get the groups
GroupCollection grps = ctx.Web.SiteGroups;
//load up the group info
ctx.Load(grps);
//execute the query
ctx.ExecuteQuery();
// enumerate
foreach (Group grp in grps)
// do something with each group
More information:
Using the SharePoint 2010 Client Object Model
How to: Work with Users and Groups
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SCADA - XMII - ERP integrations through SAP PI

Hi Experts,
I have an integration scenario comprising of a SCADA system & SAP ECC. Could anybody suggest some document / send reference links on SCADA - XMII - ERP integrations through SAP PI.
Useful response would be appreciated.
Regards,
Santhosh

SCADA-XMII integration
Scada system should always remain connected to some Historian system. You can directly connect to SCADA system to xMII using vendor specific UDS (Universal Data Servers) Like Citect UDS ...
If vendor specific UDS is not available in MII then you can make it possible if the SCADA system is OPC complaint, through OPC UDS DA, but it provides only current data without any mata data information.
As a robust business practice it is not recommended to use direct SCADA connectivity to xMII, it should go through some Historian( Citect, Wonderware, Siemens...many more) so XMII will be able to get all plant floor operations data in history & current modes.
XMII-ERP Integration
XMII supports IDOC & BAPI communication with ERP system using various SAP connectors available in XMII as in SAP BC, SAP JCO.
Specific to PI Sheet, you can download various control receipe, process orders data using IDocs.
BAPIs can be used to do "process order confirmations" back to ERP system and make changes in process data.
Let me know if you would like to know about specific SCADA system- xMII connectivity or specific activity in PI.
Thanks
Ram Upadhyay

Hyperion ERP Integrator 11.1.2.1 and ODI

Hi,
We have setup EPM 11.1.2.1 on a distributed Environment
Machine A - Web Tier Components (Foundation,HFM,Reporting and Analysis,FDQM)
Machine B - Services Tier Components(Foundation,HFM,Reporting and Analysis,FDQM)
Now I would need to have the ERP Integrator talk with Peoplesoft and to do it I would need ODI. So When I try to Install ODI 11.1.1.6 in Machine B, the weblogic (that gets installed during EPM 11.1.2.1) in machine B is 10.3.4 and is not compatible with ODI 11.1.1.6(which needs weblogic 10.3.5 or more).
While I have raised an SR for the same. If any of you have come across such a situation,kindly share your experience/suggestions.
Regards,
Leo jose.

Thanks for your valuable inputs and time.
I just spoke with Oracle Support and they had communicated that, EPM 11.1.2.1 is not compatible with ODI 11.1.1.6. ODI 11.1.1.5 is the only compatible version with 11.1.2.1 and they say their customers were sucessfull doing the installation(but then again 11.1.1.5 uses weblogic 10.3.5).I am going to give it a try.
First question would be are you going to use the J2EE components with ODI, if not then you don't even need WebLogic - I am just trying to understand the need of J2EE components for using ERPi+ODI pull data from PeopleSoft.
Is it advisable to install WebLogic 10.3.5 to a separate location? Will it not create an impact on the existing EPM environment.Also please note that, we have deployed all the application in Machine A and Machine B is going to have ODI.I think this should be my solution, if yes.
I know that 11.1.2.2 upgrades Weblogic to 10.3.6 - We are unable to find the 11.1.2.2 setup files in E-Delivery.
Thanks again,
Leo Jose.

ERP integrator target applications greyed out

Hi all,
I'm configuring the ERP integrator within EMPA (to use with FDM later) but when registering target applications three of the four are greyed out.
I have tried to delete and refresh them, re-deploy and so on but they stay greyed out.
Can anyone tell me how to re-activate the target applications so i can select them again?
Thanks,
Marc

Hi All,
Did any of you had success in configuring FDM with ERPI. I am trying to configure FDM+ERPI for extracting data from Oracle Financials R12 and load it into an EPMA Planning application. When i go onto create a Metadata Rule and click on the Add Dimension button, the next page gives an error stating: There are no more dimensions remaining to be mapped under this application. and the dimension drop down in the target application area remains empty. Any idea why this happens? My Hyperion version is 11.1.1.3. I also downloaded and applied latest available patch of ERPI but no results.
Thanks & Regards,
Muhammad Jamshaid Nawaz

CRM to ECC: Controlling Integration Issue while saving Service Transactions

Hi,
We have configured all CRM service functionalities with ECC integration. We have also set up controlling integration following best practices document.
We are getting the following error whenever we try to save any service transaction (Service Contract or Service Order).
u201CAn error occurred in system XXXXECC during account assignmentu201D
u2022 Errors in prerequisite object Item 2000000042/100 (Notification E IAOM 026)
u2022 Collector posting not allowed on account (Notification E YAM_RE 013)
Please help to resolve this issue.
Thanks,
Prish

Hi Ashish,
Could you please tell me how do we assign the debit memo request to the internal order.
I am creating a debit memo request from the confirmation. the debit memo request doesnt have the internal order number that was created in ECC. And hence, I am not able to post the revenue from the confirmation to the internal order.
Could you please help.
Regards,
Itisha

FDM mapping in ERP Integrator

Hi, all of you
I'm now thinking of the way to connect Oracle EBS 12.1.1 and Oracle Hyperion Financial Management, Fusion Edition 11.1.1.3.0 with ERP Integrator.
In the introduction section in ERPI admin guide, ERPI is mentioned as a module of FDM.
However, as far as I read the later sections in the guide, FDM is needed only if the user wants to use "FDM mapping."
Is my understanding correct, and EBS and HFM is connected only with ERPI (without FDM)?
And, if you know the advantage of using FDM mapping (I couldn't understand, actually), please tell me.
Thanks in advance
Yoshiki

FDM is not required.
The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

SAP SRM - ERP INTEGRATION

Hello,
we are designing application architecture. Our landscape is:
- ECC 6.0
- SRM 5.0
- XI 7.0
We are thinking of using XI as middleware even for those scenario in which in not required (es. Contract Managament):
In particular every time we have a communication based on IDOC we want to use XI as communication middleware. Pure RFC integration will not use XI.
Has anyone some experience on this?
Thanks
antonio

Hi
Some related Links ->
Re: Upgrade SRM on 4.7 to ECC 6.0
Re: EBP 3.0 Integration with ERP 2004
SRM@ERP2005
Re: SRM-R/3 Service Packages
Problem transferring deletion status to ERP from SRM
SRM 4.0 (SERVER 5.0) integration
Re: SRM add-on configuration
Re: Integration between SRM and 5 R/3 backends
RFC connection problem during SRM - R/3 integration
Re: ECC 5.0 & SRM / EBP
Re: SRM as ADD On in ECC6.0
Please go through the following SAP OSS Notes, which will help ->
Note 963000 - Usage and release of SRM as AddOn to ECC in ERP2005
Note 863532 - Release Restrictions mySAP SRM 2005
Note 931020 - SRM connection to an ERP 2005 (ECC 600) back end
Note 917523 - Release note SRM Server 5.5 Support Package 05
Note 1014414 - SRM 5.0 SP stack 08(03/2007) SAPKIBKT08 release/info note
Note 872533 - FAQ - Middleware
Note 740536 - No objects in administration console
Note 874589 - SRM 4.0 connection to an ERP 2005 system
Note 862290 - Connection to ECC 5.0 back end
Note 995771 - System Landscape Copy for SAP SRM 4.0 and 5.0
Regards
- Atul

[svn:fx-trunk] 12552: DataGroup now tracks the indices of the active virtual item renderers with a list , rather than the min/max values.

Revision: 12552
Revision: 12552
Author:   [email protected]
Date:     2009-12-04 13:45:12 -0800 (Fri, 04 Dec 2009)
Log Message:
DataGroup now tracks the indices of the active virtual item renderers with a list, rather than the min/max values.
DataGroup/addItemRendererToDisplayList() now respects the overlay.
QE notes:
Doc notes:
Bugs: sdk-24052
Reviewer:
Tests run: DataGroup, List
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-24052
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

Hello Martin:
Thanks for your input. However I am not certain we have resolved this issue adequately, or understand the principles governing the css as regards this spry menu framework 2.0 (1.0).
For example, the menu only works in IE 6.0 if the css remains in the head. I agree with your original post that it shouldn't make any difference whether the css is posted in the head or in a separate style sheet (so long as specificity issues are addressed). Both should work -- and yet it doesn't.
If the CSS is placed in the separate style sheet governing the total site, it doesn't work for 6.0. If placed at the top of the style sheet, conflicts of specificity prevent the menu from rendering properly in any of the browsers causing the rules for general links to govern the menu.   This has been verified using a cross browser testing. If the styles are placed at the bottom of the style sheet to help them take precedence, they work in all the browsers except for IE 6.
The website I am building needs to support IE 6 for a variety of reasons, and because it is catering to the non-profit community and to low income persons, I am mindful of even small differences in page weight.
So for me, at least, the issue remains baffling.
I appreciate your input, but also would appreciate the input from others, and especially Adobe Community Professionals and employees. The spry framework in this regard is not well documented. I am not certain if this is exclusively a CSS problem, if it might also be complicated by the architecture of the spry framework, or if indeed other variables are at play.
I would be my hope that in resolving the problem, other users of the this particular spry framework might also benefit.
Thanks,
Steve.

Target registration in ERP Integrator in the Workspace

Hi,
I'm trying to integrate HFM 11.1.1.3 with E-Business suite R12 using ERP Integrator. Actually, I want to load journal entries from EBS in HFM.
I've successfully registered the source (EBS) and I filled all the ODI details, but I can't register the target (HFM) as the "Target Application" field is empty although I've created application in hfm and in workspace.
I'd appreciate any help.
Thanks in advance.
Ahmed.

FDM is not required.
The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

Loading Alias from EBS to planning through erp integrator

Hi all,
Can anybody tell me how to load the member properties from EBS to Hyperion Planning using ERP integrator. My trial only loaded the members with few default properties.
My planning application is classic. And i used mapping type as "single segment". Didnt find any detailed options there to define the member properties.
Thanks

Hello,
I do not believe storage type is available.
The Alias is based on the languages you have defined when you setup your applications inside of ERPi. Not all "aliases" will come over; and only the basic information is actually stored as a description. I would suggest you review the ERPi Admin guide for your release.
Please review the documentation completely and ensure you understand it. The most current documentation can be found at the following URL.
http://download.oracle.com/docs/cd/E17236_01/epm.1112/erpi_admin.pdf
Information retrieved from the source can be found on Page 31.
Information about aliases can be found on Page 34.
Thank you,

FDM and ERP Integrator Module

I am trying to select the correct ledger from the Oracle E-Business Suite. Within the ERP Integrator area in EPMA, I am trying to select the ledger, when I select the entity for integration.
Select Source Accounting Entity for Integration screen returns no rows.
Any advice?
I was thinking it has to do something with ODI and specifying which Oracle E-Business Suite segments/books to pull data from. Has anyone seen a setting for a Oracle EBS segment/book in the topology manager?
Edited by: user8702914 on Oct 22, 2009 10:39 AM

Hello,
FDM is supported to Oracle RAC but not the ERP Integrator. If you see the 11.1.1.3 support matrix oracle has updated on the last tab telling that FDM will support. ERP Integrator is a new product and it was never designed or tested to be on Oracle RAC. This is what the information we got from the Oracle support when we were doing our in house testing for 11.1.1.3
Thanks

Activation of CRM RDS with ERP integration impact on existing ERP configuration

Similar Messages

Maybe you are looking for