Activation of data fails in ods with error 9

I am running the a process chain and during the process, activation of data in ODS fails with error 9.
any suggestions to correct the issue?

Hi,
open the Process Chain if the load is through PC.
right click on the failed task and click repeat.
in the pop-up window leave the seconds field blank and click continue
you can find the activation has started again.
this muct help resolve your issue.

Similar Messages

Error on activation of data records from ODS object

hi,
Kindly help with my BW Problem, the error occured on the
activation of ODS. The error says "Request
REQU_43MNOPW29W4F5M037J7OAFP52 in ODS ZPUR_O01 must have QM
status green before it is activated" and "Activation of data
records from ODS object ZPUR_O01 terminated"
I tried to check the data in the ODS Object by choosing
<LS>Administrator Workbench > data targets > context menu on ODS
Object ZPUR_O01 but the status are green and when i tried to
activate it the logs says "ODS object ZPUR_O01 was built
incorrectly. Cannot update request
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
Data to be activated successfully checked against archiving
objects
Activation of data records from ODS object ZPUR_O01 terminated"
Please help me with this problem.

Hi Jay
U need to update these requests to ODS
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
1) delete the current request
2)Reconstruct the requests above three request
3)and then Load the current reqest (REQU_43MNOPW29W4F5M037J7OAFP52)
Then only u will be able to activate the ODS....
This is an serialization issue...
hope it helps
regrds
AK
assign points if usefull

Error:Activation of data records from ODS object terminated

Hi All
i got error while loading the data "Activation of data records from ODS object terminated '
could you please tell me procedure how can i solve this issue?
regards
vasu.

- First check the Error Messages from the context menu of the activation step. Also check ST22 & SM21. This will tell you where the error is. Sometimes you might get duplicate records.
- Next use the "Manage" context menu for the ODS in RSA1. Check if any of the previous records are red. If its red, it would mean that either load/activation has failed for previous request which needs to be corrected first b4 you correct the current one.
- If al the above are OK, simply repeat the Activation step.
Hope this helps.
Regards
Anujit Ghosh

ODS activation error"Activation of data records from ODS object terminated"

Hi All,
While activating ODS request I am getting following error
"Activation of data records from ODS object KFI02O50 terminated ".
data load is suceesful for ODS but during activation of the request it is giving error.
I tried to change the status to green manually & then activated the request but still same problem.
Also I tried to delete request & loaded again from PSA & then activated the request but still same problem
If anybody has some solution please let me know.
Thanks in advance
Regards
Sonal

Hi Sonal,
Sometimes when there is erroeneous records that time while activating the Request request get fails.To check this go to manage tab of the ODS there under log u can see the log icon click on that and check y activation got failed..
Assign points if its helpful
Regards,
vid.

Boot data configuration missing or with errors

I have a Satelllite L870-15W, and no way to turn the system on.
All it says is "Toshiba" (the welcome screen) and then (after having pressed f8 or f9):
file: efi/micorsoft/boot/bcd,
status 0x0000001;
the boot configuration data for your or is missing or contains errors.
I have only recovery partition at D: but cannot access it. What shall I do?

Satellite L870-15W (PSKFNE-00700CHU) <- Hungarian version
Spec here too.
boot data configuration missing or with errors
It probably means the BCD is missing or corrupt.
To repair this, you need to access the recovery environment. Microsoft says Windows 8 will eventually take you there if it fails to boot many times. You can also get there using a System Repair Disc or a Windows 8 installation DVD like this downloadable one. You need the 64-bit disc.
It's possble this will also work on your Toshiba machine. Restart the computer by pressing the power button and immediately start tapping the F12 key until the Boot Menu appears. Using the arrow keys, select <HDD Recovery>.
WinRE looks like this. Select Troubleshoot and then Advanced options.
Lots of things to try. See KB2622803 for boot sector problems. The article assumes Windows Vista/7. The same fixes look different in Windows 8, but are all available.
If Automatic Repair (Startup Repair in 8.1) and System Restore fail, use the bootrec tool at the command prompt. This applies to Windows 8 also.
 Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issu...
Don't give up until you have tried replacing the BCD itself as follows. (Sometimes the partition is not named "c" and you need to try another letter.)
 c:
 cd boot
 attrib bcd -s -h -r
 ren c:\boot\bcd bcd.old
 bootrec /RebuildBcd
-Jerry

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted.

ORA-39083: Object type TRIGGER failed to create with error:

i m getting these two error when i import data using impdp.
ORA-39083: Object type TRIGGER failed to create with error:
ORA-00942: table or view does not exist
i have exported (expdp) data from production db, when i importing (impdp) the dump file to the test db i m geting the above two errors.
example:
ORA-39083: Object type TRIGGER failed to create with error:
ORA-00942: table or view does not exist
Failing sql is:
CREATE TRIGGER "NEEDLE"."CC_BCK_TRG" BEFORE INSERT OR UPDATE
ON NIIL.cc_bck_mgmt REFERENCING NEW AS NEW OLD AS OLD FOR EACH ROW
DECLARE
w_date DATE;
w_user VARCHAR2(10);
BEGIN
SELECT USER,SYSDATE INTO w_user,w_date FROM DUAL;
IF INSERTING THEN
:NEW.cretuser :=w_user;
:NEW.cretdate :=w_date;
END IF;
IF UPDATING THEN
:NEW.modiuser :=w_user;
:NEW.modidate :=w_date;
END IF;
END;
status of the above trigger in pro db is valid. and source table also exist even though i m getting error when i import
please suggest me...

perhaps you don't have table... (impdp created trigger before create table)
check about "NIIL.cc_bck_mgmt" table.
and then create it (trigger) manual ;)
Good Luck.

Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
{CE3119AD-35EF-41CF-9C21-C7698FEB8393}   2013-10-14 21:53:00:256-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 4 updates.
{EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}   2013-10-15 04:15:54:069-0700   1   162   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Download   Download succeeded.
{77DAE88F-2795-4258-8BBF-8D27E53662CF}   2013-10-15 12:10:38:196-0700   1   193   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems (KB2862330)
{1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}   2013-10-15 12:15:25:676-0700   1   183   101   {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}   201   0   AutomaticUpdates   Success   Content Install   Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
{A220898A-E5FE-4FE7-8413-2B0C7B4013D0}   2013-10-15 12:15:25:766-0700   1   202   102   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Content Install   Reboot completed.
{A5400FF2-33ED-4A47-8409-13E5DFE16A6D}   2013-10-15 19:29:31:486-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{43C533EE-775D-445E-A652-06648B72DE65}   2013-10-15 19:29:49:702-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}   2013-10-15 19:30:05:744-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   AutomaticUpdates   Success   Software Synchronization   Windows Update Client successfully detected 3 updates.
{4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}   2013-10-15 19:30:08:753-0700   1   147   101   {00000000-0000-0000-0000-000000000000}   0   0   ChkWuDrv   Success   Software Synchronization   Windows Update Client successfully detected 0 updates.
{51248882-41AC-4E59-B813-87AD326310AD}   2013-10-15 20:00:05:044-0700   1   183   101   {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}   501   0   wusa   Success   Content Install   Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
{FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}   2013-10-16 00:11:39:832-0700   1   148   101   {00000000-0000-0000-0000-000000000000}   0   c8000247   AutomaticUpdates   Failure   Software Synchronization   Windows Update Client failed to detect with error 0xc8000247.
Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
(1) Checked Setting, set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
(2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
(3) Ran MS FIXIT
(4) Ran System File checker Scan (sfc /scannow)
(5) Ran CHKDSK /F
(6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
(7) Ran Update for Windows 7 for x64-based Systems (KB971033)
None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
Any help or guidance is appreciated.
Solved!
Go to Solution.

The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
The End!

Essbase Error(1003050): Data Load Transaction Aborted With Error (1220000)

Hi
We are using 10.1.3.6, and got the following error for just one of the thousands of transactions last night.
cannot end dataload. Essbase Error(1003050): Data Load Transaction Aborted With Error (1220000)
The data seems to have loaded, regardless of the error. Should we be concerned, and does this suggest something is not right somewhere?
Your assistance is appreciated.
Cheers

Hi John
Not using a load rule.
There were two other records which rejected based on absentee members. The error message was different for them, and easily fixed.
But this error doesn't tell us much. I will monitor the next run to see if the problem persists.
Thanks

ITunes fails to install with error Ox800736FD. Any ideas?

iTunes fails to install with error Ox800736FD. Any ideas?
Trying to install on a Acer Aspire-- no CD/DVD

Ox800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?)

BI Server fails on startup with error

Installed Oracle BI 10.1.3.4.1 on RH5.4 64 bit
Installation completd succesfully.
When I am trying to startup BI Server got the following erorr in nqsserver.out.log file
terminate called without an active exception
BI server fails to start.
Please help.
Thank you
Michael
Edited by: Michael Elkin on Jul 2, 2012 1:39 AM

The problem was with /etc/hosts file.
The value that is returned by the hostname command should appear in /etc/hosts file otherwise BI Server fails to start with the above error
Michael

Messages fail in PI with error "Message ID already exists in database"

Hi Guru's,
The scenario is from FILE->PI->MDM .
Few messages fail in PI with the error Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database .
I have already seen the SAP NOTE : 1361305 , My doubt is if this error is any way related to MDM side issue or anything else.
Please help me out .
Attached the full trace in PI :
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: Message ID 415a6324-dd3d-11e3-94e0-00000613e84e already exists in database: com.sap.sql.exception.OpenSQLIntegrityConstraintViolationException: ORA-00001: unique constraint (SAPSR3DB.I_XI_ID_MAP_ID1) violated OpenSQLExceptionCategories: [NON_TRANSIENT, INTEGRITY_CONSTRAINT_VIOLATION]

Hi Gowtham,
Can you check once whether message gets failed after it is automatically restarted.
Check traces for each defined pipeline.
I think, at first message got failed due to some reason (i forgot the reason for my case) and when it automatically restart it fails saying message id already exist. Check the root cause why it failed for the first time.
Also check with basis team on tablespace issue.
Regards
Jitender

DBcheck get failed from db13 with error BR0301E SQL error -1031

Hi,
I am executing DBcheck from db13 but it gets failed with error "BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement".
Here is the job logs:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000424, user ID SVKM_BASIS2)
Execute logical command BRCONNECT On host svkmeccdbci
Parameters: -u / -jid CHECK20110930103211 -c -f check
BR0801I BRCONNECT 7.00 (40)
BR0477I Oracle pfile /oracle/SEP/102_64/dbs/initSEP.ora created from spfile /oracle/SEP/102_64/dbs/spfileSEP.ora
BR0805I Start of BRCONNECT processing: cegwudvg.chk 2011-09-30 10.32.12
BR0484I BRCONNECT log file: /oracle/SEP/sapcheck/cegwudvg.chk
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.12
BR0813I Schema owners found in database SEP:
DBSNMP, DIP, OPS$ORASEP, OPS$SAPSERVICESEP, OPS$SEPADM, ORACLE_OCM, OUTLN, SAPSR3*, SYS, SYSTEM,
TSMSYS
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.20
BR0814I Number of tables in schema of owner SAPSR3: 77207
BR0836I Number of info cube tables found for owner SAPSR3: 49
BR0814I Number of tables/partitions in schema of owner SYS: 625/189
BR0814I Number of tables/partitions in schema of owner SYSTEM: 134/27
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.29
BR0815I Number of indexes in schema of owner SAPSR3: 92099
BR0815I Number of indexes/partitions in schema ofowner SYS: 678/199
BR0815I Number of indexes/partitions in schema ofowner SYSTEM: 175/32
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0816I Number of segments in schema of owner DBSNMP: 25
BR0816I Number of segments in schema of owner OPS$SEPADM: 1
BR0816I Number of segments in schema of owner OUTLN: 9
BR0816I Number of segments/LOBs in schema of owner SAPSR3: 174072/2383
BR0816I Number of segments/LOBs in schema of owner SYS: 1838/87
BR0816I Number of segments/LOBs in schema of owner SYSTEM: 353/22
BR0816I Number of segments in schema of owner TSMSYS: 4
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0961I Number of conditions found in DBCHECKORA:118
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
'PREPARE stmt_5 STATEMENT FROM'
'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDE
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: cegwudvg.chk2011-09-30 10.32.52
BR0280I BRCONNECT time stamp: 2011-09-30 10.32.52
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Please help.
Thanks in advanced.
Ocean

Dear,
Thanks for the reply.
I have checked the note you have mention, but it show it is for SAP Release 6.20 or lower.
we have ECC6 EHP4 release 700.
So, please advise, should i go for that note and perform the required action ?
Thanks.

Exchange 2013 : OWA failing after login with error "HTTPS 400"

Greetings,
I am in phase of Upgrading my existing Exchange 2007 Infra to Exchange 2013.
The environment is as mentioned below:
4 Mailbox Server (DAG)
4 CAS Servers (NLB)
Everything has been configured and working properly, except Only one CAS server is able to pass the login request
https://servername/owa
Rest of all the CAS servers are failing with error "HTTPS 400" while accessing OWA
https://localhost/owa
Its happening only while accessing OWA, ECP works fine.
Please let me know the fix to counter this strange issue.
Thanks in advance.
Regards

Hi,
Please check if IIS log is enabled on the CAS server, if not, please enable it.
Then check the detailed error code from IIS logs (Path: inetpub\logs\Logfiles\W3SVC1 ) , some code like 400.1, 400.2 ect.
Refer to this KB for more details
http://support.microsoft.com/kb/943891
After that, please post the OWA related login entry with error code shows 400.
Thanks for your time and patience.
Meanwhile, please check the OWA authentication method by command
Get-OWAVirtualDirectory –Server “Ex2013 CAS server” | fl *authentication*
We should set the authentication as the below:
Get-OWAvirtualdirectory -Server “Ex2013_CAS_server” | set-OWAvirtualdirectory -windowsAuthentication $False -BasicAuthentication $True -FormsAuthentication $True
Then perform iisreset and try to access OWA again.
Best Regards.

EMac wont install OSX, fails on install with errors every time

I have a 1.25GHz emac that I just recently got, Well it wouldnt boot at first at all and had the Rom password crap on it. So i got rid of all of that and now it boots from the CD just fine it just wont install OSX im using a Retail Black disc for Tiger and it just wont get past a certain spot in the install and fails with errors every time. Any suggestions? Ive tried to install panther & Jaguar and neither of those discs will boot.
Thanx
Jeremy

Sometimes, the OSX installer wants a clean partition. As the computer is new to you and probably has no files on the drive you need, I suggest you wipe the drive before trying again. Boot from the install CD and choose "Open Disk Utility" from the installer's File menu. Use DU to erase and reformat the disk, choosing "Mac Extended (Journaled)" format.
This will clear any old files that are interfering with the installer and leave a blank slate.

Activation of data fails in ods with error 9

Similar Messages

Maybe you are looking for