Activation of datatargets in bw 3.5 is taking lot of time

Hi
i am using bw 3.5.I have created lot of infocubes , ods etc for practice sake .May be due to this or some other reason , its taking lot of time to get executed . sometimes same screen is appearing for a long time (nearly half an hour)even i m trying to activate any datatarget . In this case i am again stopping the bw in sapmmc and again starting
what may be the reason for both these things.Is it due to overload of data ??
If so , shall i delete the previous data targets?
Anyone plz give me the reason for this kind of problem
Thank you
Deepthi matturi

Hi Deepthi
Your are working on ides or any training system , there is no batch_jobs was scheduled to clear down the logs,
it seems that it is bulding up logs , which needs to be deleted
OR
there may be less table space , you can check table space using : DB02,
please ask your basis team to check your bw system/server
Hope this helps
sukhi

Similar Messages

CRM Smartform activation takes lot of time

Dear All,
We are designing a smart forms in CRM 5.0 and its taking lot of time more than 6 hours in activation.
We would like to know whether there is any pre-requisite setting which needs to be done before we actually start the activation.
Regards
Rahul

Hi Rahul,
Smart Form Activation doesnt take this much Time,
Run Check on your Smart Form to Test weather the Written Lines are Correct or not.
Use (CTRL+F2) for running the check.
Else Exit the Smart Form Check for Lock Entries in Transaction SM12 if Exist clear them up
and Try Activating Up again.
Hope it Solves your Problems...
Thanks and Regards,
RK.

Taking too much time incollecting in business content activation

Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268

Activation of ODS taking very long time

Hello friends,
I have a problem with activating ODS data . Data has been loaded into ODS , but Activation process is taking more than 1 week . This problem is since last week. We are using BW 3.5 version with SP level 18.
When I right click ODS and chose delete data , then It is saying a message 'Lock in the lock manager could not be set' Message no: RSENQ009.
Could you please help me with this.
Any advice greatly appreciated.
Thanks

Hi Manoj,
)Data Activation can be processed in parallel and distributed to server groups in the BW customizing (transaction RSCUSTA2) in BW 3.x. There are parameters for the maximum number of parallel activation dialog processes, minimum number of records per package, maximum wait time in seconds for ODS activation (if there is no response of the scheduled parallel activation processes within this time, the overall status is red) and a server group for the RFC calls when activating ODS data.
2)Do not set the BEx Reporting flag if you do not plan to Report on ODS objects in BEx or in Web. If your reporting requirements on ODS objects are very restricted (e.g., display only very few, selective records), use InfoSets on top of ODS objects and disable the BEx Reporting flag.
In BW 3.x, the SIDs are determined during activation, in BW 2.x during data load. ,hence increasing the Activation time
Also refer the below notes
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler
Hope these helps
Regards
Karthik
Assign points if helpful

Transform activity is taking a lot of time

Hi All,
I have a process that gets data from a file and insert it into a DB.
I'm using a transformation activity between the file & DB adapters.
When tranform few records I hva eno problem. When transforming 30,000 records it takes about 25 minutes, and it's a lot.
Some one maybe knows what can be the reson???
The data is very simple(string/numbers). With another tool it takes few sec'
Thanks
Riko

Hiii Riko, I don't know the exact solution to your problem. Some of my thoughts on your issue here.
I too have production server and I must say 25 mins for 30k records is a reasonable time considering it logs the instance processes/records in the DB in background.
The transformation in SOA Suite takes a lot of time as while doing transformation it keeps the whole payload (which consists of 30K records in memory/RAM). As it is obvious that it would be transforming one record at a time, but keeping all records in memory for their processing.
If your requirement is only routing and transformation why don't you go for an ESB. I suggest that you use Oracle Service Bus for that. It doesn't keep the whole payload in memory and execution would be much faster. Still it would not be in few seconds( I dont know which tool you are testing with).
If you are going to have many transactions where you need to pass 30-50K records frequently and many a times in a day I suggest you go with Oracle Data Integrator (ODI).

HT4623 Hi everyone, I updated my iphone 3gs to ios6. But, when it come to the activation screen, It showed up could not activate iphone because the activation server is temporarily unavailable. I tried to restore many times already but it still the same.

Hi everyone, I updated my iphone 3gs to ios6. But, when it come to the activation screen, It showed up could not activate iphone because the activation server is temporarily unavailable. I tried to restore many times already but it still the same. Help me please! T-T

Please see the More Like This section on the right.

Time Machine backups taking extremely long time and disrupting other computing activity

I have an iMac running the latest version of Lion (10.7.4) and which I have upgraded to a one terabyte hard drive and full memory capability. I back up to a My Book 2 terabyte external hard drive using Time Machine. My iMac is often very sticky, though I've done most of the diagnostics I know of and preferences etc. are seemingly all OK and fcuk -fs gives a positive result! The Mac is often hard to wake from sleep and in particular seems to spend a lot of time backing up very-very slowly, with the result that it frustratingly seems to be backing up most of the time with the consequent effercts on using other programmes. Also the whole thing seems to grind to a halt after a hard days work with quite a few applications open. I'm wondering what can be causing this and what I can do to overcome this very frustrating and debilitating problem?

Hi
I would try the following for now and I am sorry, yes you were clear that it's an external drive.
Rebuild Spotlight
-Rebuild the spotlight index as per http://support.apple.com/kb/ht2409 as a first step. Spotlight indexes play a role in healthy backups so this is why this could be a good thing to do.
- When conducting the next backup, after the spotlight re-index, consider connecting to your mac only the external hard drive and disconnect all other devices to rule out other devices affecting things. I suggest connecting devices back one at a time followed by a triggered backup until the issue fails to reproduce itself.
General Performance Issues
- Some performance issues can also be cured through an SMC reset. This article can help in this regard, note that the steps differ depending on the model mac you use: http://support.apple.com/kb/HT3964
--In terms of the mac's general sluggishness
- SMC can help
- open Activity Monitor and check to see if CPU usage is abnormally high or any particular process is consuming an elevated amount of CPU cycles, see http://support.apple.com/kb/PH5146
Check External HD (backup drive)
- If you've run disk utility and have done a repair permissions and repair disk as per user "Radiation Mac" then there is no point doing it again but this should just be a reminder incase you missed it.
-- on a related note to disk utility try;
1) Mount your external hard drive.
2) In Disk Utility, locate your external backup drive. Your backup drive should mount in the Disk Utility sidebar when attached to your Mac.
3) Select your external backup drive.
4) Click Repair.
Test Time Machine backups against a different drive
--If you have a spare hard drive or even a small USB stick, you could back up only a very small amount of data to this second hard drive or USB stick as a test. This article outlines how to exclude from backups, http://support.apple.com/kb/HT1427
Further Ideas
Seeing the logs would be useful if the issue persists. There maybe a reason for the issue but it appears only in the logs which we may eventually need.
I almost forgot
-make sure everything is uptodate with Apple software/firmware and any firmware for your drive if applicable.
If anything is unclear, feel free to let me know, I will provide more details.

Getting messages "startup disk is full" and activity monitor is showing "syslog d" is using a lot of CPU. I'm planning on getting more memory for my late 2008 model Macbook but wondering if there's something that is causing problems that I can also fix.

I had closed out of all of my programs but heard the internal fans running so I checked the activity monitor. It shows syslog d as the top process using the CPU right now. I have no idea what that means.
I read a thread about the startup disk being full and how you can free up memory. I have an airport extreme so TimeCapsule is backing up everything. I do have a bunch of pictures on iPhoto on the laptop; could move those to another location but I'm a little gunshy. I know they are on the TimeCapsule but I would like to save them to a second place before deleting from laptop just to be sure. I went through several things yesterday and emptied trash, etc. I wasn't able to locate the hidden files that the thread about the startup disk being full was referencing --- they were talking about large emails that were causing processes to happen taking up the CPU.... I wasn't able to find out if that was the case for me.
Also I'm going to look into getting another 2MB of memory and installing it on the Macbook, so I can upgrade to the latest OS. Anyone have an idea if that is worth the $$$ over buying a new laptop? Or anyone have ideas as to where to buy memory, etc.
Any ideas - help!

Go step by step and test.
1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Empty Trash.
   http://support.apple.com/kb/PH13806
3. Disk space / Time Machine ?/ Local Snapshots
Local backups
   http://support.apple.com/kb/ht4878
4. Delete old iOS Devices Backup.
    iTunes > Preferences > Devices
    Highlight the old Backups , press “Delete Backup” and then “OK”.
    http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
5. Re-index Macintosh HD.
    This will take a while. Wait until it is finished.
    System Preferences > Spotlight > Privacy
    http://support.apple.com/kb/ht2409

Active users request taking too much time

Hello,
every time i run "active users" request it take about 40 minutes and errored out the following
X connection to aixtst01:1.0 broken (explicit kill or server shutdown).
any idea?

Sounds like you've switched the output of Active Users from Text to PDF or Postscript... an your X Server is not working. Try changing the output back to Text on the Concurrent Program Definition for Active Users. Or get your X Server up and running.
Gareth
http://garethroberts.blogspot.com

Face time shows waiting for activation , what can I do to solve this problem?, face time shows waiting for activation , what can I do to solve this problem?

when I try to set ON to face time , it shows "WAITING FOR ACTIVATION" and is not changing , please help me to solve this problem.

Where are you? What network are you on? Where did you get the iPhone?
FaceTime is blocked in much of the Middle East due to the laws there. Face Time WILL NOT work on the US T-Mobile Network. In order for Face Time to activate, you MUST have a text messaging plan or at least be able to send them (not blocked by the carrier). If you purchased the phone in another country, you MUST be able to send an international text message.

Error! Check Activation and Can't Delete Authorization, getting "Please try after some time"

Hello,
I am getting "Error! Check Activation" error message when I try to download epub from acsm file. I found that I should erase and re-authorize. When I try to erase authorization I get, "Please try after some time."
I need a solution.
Thanks.

try this
I can't de authorize my computer. It just keeps saying to try again later.

Allow active content to run files on my computer - turns off each time system is rebooted.

I seem to have an issue with setting the allow active content to run files on my computer in internet explorer. Each time I turn it on reboot the computer the setting is turned off.
This computer is on a domain, but there are no domain policies for internet explorer.
Any idea's why this is turning off each time I reboot?
Thanks

Hi John,
Based on your description, we can try to set the following registry key to see if it helps:
HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_LOCALMACHINE_LOCKDOWN
Value Name:
iexplore.exe
Value Type:
REG_DWORD
Value Data:
0
Regarding this point, the following article can be referred to for more information.
"Allow active content to run files on My Computer" Group Policy Setting Does Not Work as Expected on Windows Server 2008 or Windows Vista RSAT
http://support.microsoft.com/kb/2002093
Best regards,
Frank Shen

Snow leopard Active directory account taking a long time to verify password

Hi,
My mac is configured to use an active directory account (windows small biz server 2008), i configured a mobile account when i was still under leopard and it was working fine. Since i upgraded to snow leopard i started experience the following issues:
When i am out of the office (not connected on the domain), logging in to my mac take about 5min after i type the password, same thing when the mac awakes from sleep, i type my password and it says verifying password and this takes about 5 minutes to complete! Another issue i am experiencing is that whenever i put my mac to sleep, when it wakes up most of the running applications crash and i have to restart them. i was hoping 10.6.2 would fix that but it didn't.
Sorry for the long post. Thank you in advance for your support!

I guess we will have to wait for someone to give us a clue, or for apple to release 10.6.3 .

Firefox is crashing randomly, whether i am actively using it or leave it up for a period of time, and there seems to be no consistency as to what is causing it (websites, time until crash, etc).)

using Mac OS X 10.6.7. 3.06 ghz intel core 2 duo, 4 gigs ddr3 ram. Firefox 5.0.
All crash report signatures say js::RegExp::execute. All these crashes have been spread from today to the 27th of June.
There seems to be no consistency as to what websites it crashes on. Sometimes it crashes with several tabs up, sometimes only one. Sometimes on tumblr or twitter, sometimes on livejournal, sometimes elsewhere.

using Mac OS X 10.6.7. 3.06 ghz intel core 2 duo, 4 gigs ddr3 ram. Firefox 5.0.
All crash report signatures say js::RegExp::execute. All these crashes have been spread from today to the 27th of June.
There seems to be no consistency as to what websites it crashes on. Sometimes it crashes with several tabs up, sometimes only one. Sometimes on tumblr or twitter, sometimes on livejournal, sometimes elsewhere.

Activation of datatargets in bw 3.5 is taking lot of time

Similar Messages

Maybe you are looking for