ACTIVATION OF DSO error: write optimise dso -
I have taken two info objects 1. customerid and 1. price
created data source and done activation
created DSO with WRITE OPTIMISE DSO (ticked the below line also) and after clicking activation, getting error message
info object 0request is not available in version A
info object 0datapakid is not available in version A
info object 0record is not available in version A
inconsistencies found while checking dso object aaa
activation failed
help please
S madhu
my basic objective is to load data covering characterstics and key figures(I have no idea whether to take write optimise or std etc)
into dso
for this I have done the following
1. infoarea
2. info ob cat for char and key
3. info objects 1. customerid --- char (no additional attribute)
2. price --- key (USD)
3. source system
4. ac and DS
5. activated the ds and preview data---- ok
6. created DSO and added the two info objects customer id under symatic key and price under data fields
version showing as in process
then activated and noticed that its not activating and showing as object status not activated.
1. If this is wrong, pl tell me the steps in this regard, if possible step by step screenshots
2. without activation, can I go ahead for the remaining steps
regards
madhu
Similar Messages
-
Do Not Check Uniqueness of Data in Write Optimised DSO
Hello,
I am working with write optimised DSO with already billion records in it. I have flag 'Do Not Check Uniqueness of Data' in Settings as checked(means it will surely not check for uniqueness of data). I am thinking of removing this flag off and activate the DSO again. I am willing to remove this flag as it will provide option of Req ID input in listcube on DSO and without this list cube will never return back with results.(I have to analyze aggregations)
I tried removing this flag and then activate DSO in production system with 17 million records which took 5 mins for activation (index creation). So maths says for a billion records activation transport will take around 6 hrs for moving to Production.
I am willing to remove this flag as it will provide option of Req ID input in listcube and without this list cube will never return back with results.
Questions:
How does this flag checks the uniqueness of record? WIll it check Active table or from the Index?
To what extent DTP will slow down the process of subsequent data load?
Any other factors/risks/precautions to be taken?
Let me know if questions are not clea or further inputs are required from my side.
Thanks.
AgastiHi,
Please go through the site :
/people/martin.mouilpadeti/blog/2007/08/24/sap-netweaver-70-bi-new-datastore-write-optimized-dso
As far as your ques are concerned... i hope above blog will answer most of it , and if it does'nt please read below mentioned thread.
Use of setting "Do Not Check Uniqueness of Data" for Write Optimized DSO
Regards
Raj -
How delta datas are handled when loading the write optimised, transactional DSO(sice they don't have any change log tables)?
Hi,
Delta Administration:
Data that is loaded into Write-Optimized Data Store objects is available immediately for further processing. The activation step that has been necessary up to now is no longer required. Note here that the loaded data is not aggregated. If two data records with the same logical key are extracted from the source, both records are saved in the Data Store object, since the technical key for the both records not unique. The record mode (0RECORDMODE) responsible for aggregation remains, however, the aggregation of data can take place at a later time in standard Data Store objects. Write-Optimized DataStore does not support the image based delta, it supports request level delta, and you will get brand new delta request for each data load.
Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Write-Optimized Data Store supports request level delta. In order to capture before and after image delta, you must have to post latest request into further targets like Standard DataStore or Infocubes.
the matter is taken from one of the recent weblogs in BI forum.Check for more details on WO-dso.
SAP NetWeaver 7.0 BI: new DSO " Write-Optimized DataStore"
The specified item was not found.
cheers
Sunil -
SID Generation Error while activating the DSO.
Hello Gurus,
Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
In dump error, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
SQL error in the database when accessing a table.
So please advice me to solve this problem would be appreciated and reward points.
ArunHello Arun kumar,
That's easy you have errors in the field 0REF_KEY3.
Since it is a DSO it let's you load everything but in the time of the activation it complains!
The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
Try to find that record, change it in PSA and reload the request again.
TCode-E3//Rec.Typ-CO
The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
Try to see if you have more records like those and fix them too.
That should work.
Please assign points if it helps,
Diogo. -
Error while activating 0FIAR_O03 DSO from Business content
Hi,
While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
Thanks,
RAJHi raj,
The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
do the following... try to activate the DSO once again ... you will get the message again
now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
Regards
KP -
Error during activation of DSO - Activation of M records from DataStore obj
Hi All,
Below is the error i am getting while activating the DSO, Even though similar post on this topic, solution not mentioned, any solution greatly appreciable.
When -
During Activation of DSO
State of DSO -
Request become "RED", It is available for reporting, some records in Active table, some in new table and some in new table.
Job Log -
Error when inserting the data record for data package
Process 000105 returned with errors
Error when inserting the data record for data package
Process 000106 returned with errors
Process 000107 returned with errors
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_4GXKRYHMY97R9U62M6U52XXXY data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object Z_DSPO terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Detail log -
Error when inserting the data record for data package 106
Message no. RSODSO_PROCESSING002
Diagnosis
Failed to store data records persistently. Possible causes are:
You tried to save a record that is already stored in the database.
This error only occurs with DataStore objects with option "Unique Data Records".
A unique index was created for the table of active data.
You can check this in the Data Warehousing Workbench by choosing "Display" for the DataStore object and opening the "Indexes" folder.
There is a technical problem on the database.
Thanks,HI PT,
I am also getting the same error like i have loaded the data into DSO and tried to activate the init request but it has become red and checked in log found that there are some SID Generation errors so please give me the step by step solution.
SID Generation
Data Package 000056
Data Package 000064.
Thanks in advance,
Jay -
Issue related with the Date Format --- error when activating the DSO
Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...
Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
is there any routine to solve this or i have to go for data selection in info package ......
I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
Value '20101402' of characteristic 0DATE is not plausible
Thanks
Baskar
Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PMHi Friends..
plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
Value '31122009' of characteristic 0DATE is not plausible
Thanks
Baskar -
Hi Team,
After loading the data to DSO and Activating i find the following error.The DSO is activated.There is data in New table and error occurs while activating.
The Errors are:
1.DSO ZPF_O07 is inconsistent; request DTPR_4IA4N9BCL2ENOIICW4PFEOCOJ only exists in RSODSACTREQ
2.Activation of M records from DataStore object ZPF_O07 terminated.
Can you please help me out in finding the appropriate solution for the same.This is in Production system.
Thanks & Regards,
Pradeep P.Hi Somu,
Go to the table RSODSACTREQ and filter the Request id values with DTPR_4I*.Delete this entry from the table if you have authorizations to access.If not request the basis team to do this.
Once the table entry is deleted ,try the activation again on the ODS with single request id.
Regards
KP -
I am not able Activating the DSO
Hi BW guru`s,
I have a problem with standard DSO. I have loaded Transactional Data from Flat File (CSV) to Standard DSO. After loading data I have been trying to Activating the DSO, but I could not able to activate. I could able see the data in NEW Data table. when I am trying to activate, the request ID could turned into red. I do not know why I am getting this error.
These are the Characteristics (National Customer, Sales Organization, Brand, Calyear) and Keyfigures (Sales, Volume) which I used in DSO.
Does anybody help in this and I will assign some good points.
It is urgent.
Thanks,
Venkat
Edited by: VENKAT BOORUGADDA on Aug 1, 2008 9:20 AMHello Venkat,
It generally happens......If u have run InfoPackage several time...such error is expected...
Do one thing.....just log out and Log in once again...
Schedule ur load thr' Infopackage....
It will definitely help.....
And yes when you will activate particular request....click the option below the activate button........"dont condense the request...."
Hope this helps........Rewardd if helps
Thanks,
Sonu -
Activation of DSO: Message No. RSM096
Hi,
After having deleted a request in the PSA, I can no longer activate the data in the target DSO.
Get the error message:
"Request XXXXX (XXXX) for DataSource X from source system XXX has the status green and a lesser SID (and is therefore older) than the request that you currently want to update into the DataStore object. This is not possible because the sequence of requests has to be followed."
I've tried deleting all subsequent requests in the PSA and the DSO, and then reloading the data from the source system, but still get the same error message with the same request-id.
Anyone who knows how this problem can be solved? The request had only been loaded to the PSA, and not (successfully) to the DSO before I deleted it.
Thanks in advance,
OlavHi,
The error message clearly tells that the request was removed without turning the status as red.
To resolve the issue -->
1) Copy the request from error message.
2) Run RSRQ and enter this request.
3) Make the status red.
4) Now try activating the DSO .
If issue is still not resolved after this, revert back.
Regards,
Arpit -
Activation of DSO failing frequently in process chain..
Hello Friends..
I need your ppl experience and help, in investigating an issue, we have a process chain, in which the activation of DSO is failing frequently, i have checked the log messages..but it gives no clue, it just displays the message that " Activation of M records from DataStore object ZCS_O01 terminated " and even when i try to check process monitor, it displays message " No log entry available for Datastore Object", i have even checked the st22 for short dumps,there also i could find no log entries..
This chain runs for every four hours...but it works fine some times automatically, but fails at least two-three times every day.
So could you ppl please help me...in further investigation..that where should i check...and try to trace the prob..
Thanks
RaghuHi Raghuram,
It can be due to lack of process or the activation process is timing out. Look for available background process in SM50 while activation is going on.
Also Check the ODS Object Customising settings
ODS-Manage->Goto(menu)-->Customising Datastore-DataStore Specific-> (YOur DSO Name)
and try to increase the timeout time for activation ,,,,,Just optimise these settings according to your system.
Thanks! -
Hi All,
I could see following error event in all client computers , Could you please some one help me on this ?
Log Name: Application
Source:
Microsoft-Windows-CertificateServicesClient-CredentialRoaming
Event ID: 1005
Level: Error
Description: Certificate Services Client: Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)
Regards, Srinivasu.MuchcherlaIf you are not using certificates and Credential Roaming for clients then simply ignore the error message.
If you are using certificates then you are getting access denied message when Credential Roaming is trying to write to your AD. More details about Credential Roaming here: http://blogs.technet.com/b/askds/archive/2009/01/06/certs-on-wheels-understanding-credential-roaming.aspx
http://blogs.technet.com/b/instan/archive/2009/05/26/considerations-for-implementing-credential-roaming.aspx
This is probably related to the fact that your schema version not 44 or higher: https://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a6e61-68c4-47d3-ae79-8296cb3be315/certificateservicesclientcredentialroaming-errors?forum=winserverGP
Active Directory
ObjectVersion
Windows 2000
13
Windows 2003
30
Windows 2003 R2
31
Windows 2008
44
Windows 2008 R2
47
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
In Process Chain Activation of DSO is falling
Hello Techies,
In the Process chain the activation of DSo is falling but when I go and check the in the Manage DSo.
The Data is activated and available for reporting.
I dont know why in the Process chain the activation of DSO is falling ?
Regards,
QuaraishiHi
It depends on background job resource availability at the time of DSO Activaton. Also check the settings of the variant DSO Activation process for each DSO activation and make it separate with number of processes to 2 for activation.
Save the changes and activate it. Should work correctly now.
Thanks,
Sunil -
Improve the performance of the data activation on DSO.
Hi,
I would like to improve the performance of the data activation on DSO. 1000 records should be uploaded by 10 minutes.
Now it takes 10 minutes to activate data in DSO. And it is strange that it takes long time ( about 9 minutes) before starting activation.
ex :
in the request task log of the activation:
data activation 15:10:00
main process 15:10:01
technical status 15:10:21
But activation is started at 15:01:00 here. (this is started via process chain).
I have no idea why it takes so long time and how I can improve.
Kind regards,
MasaakiHi,
Try this also.
1. Remove Bex Reporting check box in ODS if not required.
2. Goto manage ODS -> activate -> activate in parallel -> increase the number of processes from there.For direct access try TCode RSODSO_SETTINGS. Not sure this is possible in your case.
thanks,
JituK -
NTDS Replication - Active Directory encountered a write conflict
HI,Active Directory encountered a write conflict when applying replicated changes to the following object.
Object:
CN=Administrator,OU=Admin,OU=CGL,DC=cgl,DC=local
This seemed to have started when the Administrator Account got locked out some how, it has since been unlocked and hasn't been locked again since.
I have moved the Administrator to a different OU and run repadmin /syncall which seemed successful but shortly afterwards the error logs started appearing again.
I run Ldp.exe and searched under the OU Admin to see if there were duplicate records but only one was found.
Has anyone got any other suggestions? I've tried all the solutions and rebooted the server but still I get the attached in my event viewer... any other ideas anyone? Thanks
Thanks
Hakan
Good luck everyone.Have you enabled the ability for the built-in Administrator account to being able to be locked out (that's not on by default) - See
http://blogs.technet.com/b/mempson/archive/2012/01/13/event-id-12294-woes.aspx
I suggest renaming the account.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog
Maybe you are looking for
-
Download Oracle 8.6.1
Hi I want to download Oracle 8.6.1...Can anyone prove me the link to download this software.. i download this software but i still not satisfied...
-
Exchange system 2010 delay receiving mail from outside
Hi Experts, Recently, some users in my company reported that when a outside user (domain [email protected]) send mails to our users, maybe have attachments or not, some of them were delayed for a half of day. For example, yesterday, customer send mai
-
Want to merge data into a table containing 10 million rows
Can somebody suggest me a fast and optimized way to merge data into the table.The source table contains 1 million data.
-
Automated Unit Tests / TEST-INF/testrun.xml
Hello! Regarding to the originial question here Re: Automated Unit Tests through NWDI / Purpose of testrun.xml I'll try to ask this question again: Is it possible to run jUnit-Tests automatically during the build (cbs)? A very promising looking file
-
Adobe elements 9 slideshow-codec issue
I am new to this slideshow process, but have successfully created a 24 min video, have added my pictures and transitions into the slideshow. Now I was about to add audio to it. However, I have been able to get anything to work. My I-tunes songs we