Activation of DSO failed

Hi Team,
After loading the data to DSO and Activating i find the following error.The DSO is activated.There is data in New table and error occurs while activating.
The Errors are:
1.DSO ZPF_O07 is inconsistent; request DTPR_4IA4N9BCL2ENOIICW4PFEOCOJ only exists in RSODSACTREQ
2.Activation of M records from DataStore object ZPF_O07 terminated.
Can you please help me out in finding the appropriate solution for the same.This is in Production system.
Thanks & Regards,
Pradeep P.

Hi Somu,
Go to the table RSODSACTREQ and filter the Request id values with DTPR_4I*.Delete this entry from the table if you have authorizations to access.If not request the basis team to do this.
Once the table entry is deleted ,try the activation again on the ODS with single request id.
Regards
KP

Similar Messages

Activation of DSO failing frequently in process chain..

Hello Friends..
I need your ppl experience and help, in investigating an issue, we have a process chain, in which the activation of DSO is failing frequently, i have checked the log messages..but it gives no clue, it just displays the message that " Activation of M records from DataStore object ZCS_O01 terminated " and even when i try to check process monitor, it displays message " No log entry available for Datastore Object", i have even checked the st22 for short dumps,there also i could find no log entries..
This chain runs for every four hours...but it works fine some times automatically, but fails at least two-three times every day.
So could you ppl please help me...in further investigation..that where should i check...and try to trace the prob..
Thanks
Raghu

Hi Raghuram,
It can be due to lack of process or the activation process is timing out. Look for available background process in SM50 while activation is going on.
Also Check the ODS Object Customising settings
ODS-Manage->Goto(menu)-->Customising Datastore-DataStore Specific-> (YOur DSO Name)
and try to increase the timeout time for activation ,,,,,Just optimise these settings according to your system.
Thanks!

Error during activation of DSO - Activation of M records from DataStore obj

Hi All,
Below is the error i am getting while activating the DSO, Even though similar post on this topic, solution not mentioned, any solution greatly appreciable.
When -
During Activation of DSO
State of DSO -
Request become "RED", It is available for reporting, some records in Active table, some in new table and some in new table.
Job Log -
Error when inserting the data record for data package
Process 000105 returned with errors
Error when inserting the data record for data package
Process 000106 returned with errors
Process 000107 returned with errors
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_4GXKRYHMY97R9U62M6U52XXXY data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object Z_DSPO terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Detail log -
Error when inserting the data record for data package 106
Message no. RSODSO_PROCESSING002
Diagnosis
Failed to store data records persistently. Possible causes are:
You tried to save a record that is already stored in the database.
This error only occurs with DataStore objects with option "Unique Data Records".
A unique index was created for the table of active data.
You can check this in the Data Warehousing Workbench by choosing "Display" for the DataStore object and opening the "Indexes" folder.
There is a technical problem on the database.
Thanks,

HI PT,
I am also getting the same error like i have loaded the data into DSO and tried to activate the init request but it has become red and checked in log found that there are some SID Generation errors so please give me the step by step solution.
SID Generation
Data Package 000056
Data Package 000064.
Thanks in advance,
Jay

ACTIVATION OF DSO error: write optimise dso -

I have taken two info objects 1. customerid and 1. price
created data source and done activation
created DSO with WRITE OPTIMISE DSO (ticked the below line also) and after clicking activation, getting error message
info object 0request is not available in version A
info object 0datapakid is not available in version A
info object 0record is not available in version A
inconsistencies found while checking dso object aaa
activation failed
help please
S madhu

my basic objective is to load data covering characterstics and key figures(I have no idea whether to take write optimise or std etc)
into dso
for this I have done the following
1. infoarea
2. info ob cat for char and key
3. info objects 1. customerid --- char (no additional attribute)
2. price --- key (USD)
3. source system
4. ac and DS
5. activated the ds and preview data---- ok
6. created DSO and added the two info objects customer id under symatic key and price under data fields
version showing as in process
then activated and noticed that its not activating and showing as object status not activated.
1. If this is wrong, pl tell me the steps in this regard, if possible step by step screenshots
2. without activation, can I go ahead for the remaining steps
regards
madhu

BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups

Dear all
        In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message:
       " Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
      Anyone has encountered similar issue?
   BO version: BO XI 3.1 SP5
   Authenticate: Windows AD
Thanks and Regards

Please get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
http://service.sap.com/sap/support/notes/1323391
http://service.sap.com/sap/support/notes/1199995
-Ambarish-

SID Generation Error while activating the DSO.

Hello Gurus,
Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
In dump error, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
SQL error in the database when accessing a table.
So please advice me to solve this problem would be appreciated and reward points.
Arun

Hello Arun kumar,
That's easy you have errors in the field 0REF_KEY3.
Since it is a DSO it let's you load everything but in the time of the activation it complains!
The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
Try to find that record, change it in PSA and reload the request again.
TCode-E3//Rec.Typ-CO
The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
Try to see if you have more records like those and fix them too.
That should work.
Please assign points if it helps,
Diogo.

Error while activating 0FIAR_O03 DSO from Business content

Hi,
While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
Thanks,
RAJ

Hi raj,
The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
do the following... try to activate the DSO once again ... you will get the message again
now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
Regards
KP

In Process Chain Activation of DSO is falling

Hello Techies,
In the Process chain the activation of DSo is falling but when I go and check the in the Manage DSo.
The Data is activated and available for reporting.
I dont know why in the Process chain the activation of DSO is falling ?
Regards,
Quaraishi

Hi
It depends on background job resource availability at the time of DSO Activaton. Also check the settings of the variant DSO Activation process for each DSO activation and make it separate with number of processes to 2 for activation.
Save the changes and activate it. Should work correctly now.
Thanks,
Sunil

I am not able Activating the DSO

Hi BW guru`s,
I have a problem with standard DSO. I have loaded Transactional Data from Flat File (CSV) to Standard DSO. After loading data I have been trying to Activating the DSO, but I could not able to activate. I could able see the data in NEW Data table. when I am trying to activate, the request ID could turned into red. I do not know why I am getting this error.
These are the Characteristics (National Customer, Sales Organization, Brand, Calyear) and Keyfigures (Sales, Volume) which I used in DSO.
Does anybody help in this and I will assign some good points.
It is urgent.
Thanks,
Venkat
Edited by: VENKAT BOORUGADDA on Aug 1, 2008 9:20 AM

Hello Venkat,
It generally happens......If u have run InfoPackage several time...such error is expected...
Do one thing.....just log out and Log in once again...
Schedule ur load thr' Infopackage....
It will definitely help.....
And yes when you will activate particular request....click the option below the activate button........"dont condense the request...."
Hope this helps........Rewardd if helps
Thanks,
Sonu

Active Directory domain failed

Hello Team,
When i joined to our active directory, everytime bui gives same error messages:
The attempt to join the Active Directory domain failed either because the clocks of the appliance and the domain controller are skewed or the administrative user
does not have the appropriate permissions to create a computer account in Active Directory.
It is recommended that NTP be used to keep clocks synchronized when using Active Directory.
Storage Appliance: 7310 One Controller, No firewall for ntp server also which connect directly NTP Domain server. Actually my believe is that no time sync issue.
Firmware version is latest patch.
What is your idea about this issue?
i did many times this action plan: but result is same
ActiveDirectoryTasks
B)Joining a Domain
1.Configure an ActiveDirectory site in the CIFS context. (optional)
2.Configure a preferred domain controller in the CIFS context. (optional)
3.Enable NTP, or ensure that the clocks of the appliance and domain controller are synchronized
to within five minutes.
4.Ensure that your DNS infrastructure correctly delegates to the ActiveDirectory domain, or add
your domain contoller's IP address as an additional name server in the DNS context.
5.Configure the ActiveDirectory domain, administrative user, and administrative password.
6.Apply/commit the configuration.
A)Joining aWorkgroup
Configure theworkgroup name.
Apply/commit the configuration.
1. First of all LAN Compatibility Mode 4 works fine with Win 2003 (AD Server)
2. While trying to join the AD, using a non ADMIN username and passsword will not help
Try using a username/pass which has Administrative Privileges (specifically having the rights for Account Creation in
the AD Server) on the AD server.
(I was trying by a different username/pass but it was not joing the storage to AD. It joined when i tried a user having
the privileges to create Machine Accounts in AD)
3. For Clock Sync, the tolerance limit is upto 5 Minutes..So you can take care that the difference does not go beyond
5 minutes.
Thanks
Can
Gantek Tech.

Your first post to these OTN forums.
You posted your inquiry to a HARDWARE forum.
Your issue seems to be a Microsoft OS issue and you just happen to have your OS volumes on a model 7310 appliance.
I suggest you go find a forum somewhere that is hosted for Microsoft AD issues.
If you happen to need the documentation for that piece of storage hardware, there are currently three PDF's available:
http://docs.oracle.com/cd/E19935-01/index.html
They are the Installation Guide, the hardware Administration Guide, and the Service Manual.
There are no current Oracle-published documents for that box as related to Active Directory.

Activation of DSO: Message No. RSM096

Hi,
After having deleted a request in the PSA, I can no longer activate the data in the target DSO.
Get the error message:
"Request XXXXX (XXXX) for DataSource X from source system XXX has the status green and a lesser SID (and is therefore older) than the request that you currently want to update into the DataStore object. This is not possible because the sequence of requests has to be followed."
I've tried deleting all subsequent requests in the PSA and the DSO, and then reloading the data from the source system, but still get the same error message with the same request-id.
Anyone who knows how this problem can be solved? The request had only been loaded to the PSA, and not (successfully) to the DSO before I deleted it.
Thanks in advance,
Olav

Hi,
The error message clearly tells that the request was removed without turning the status as red.
To resolve the issue -->
1) Copy the request from error message.
2) Run RSRQ and enter this request.
3) Make the status red.
4) Now try activating the DSO .
If issue is still not resolved after this, revert back.
Regards,
Arpit

"Active Directory operation failed on DC " when assigning Send As permissions on a distribution group

I'm trying to give a mailbox user Send As right for a distribution group. But the cmdlet comes back with this:
Get-DistributionGroup MyGroup | Add-ADPermission -user albert -ExtendedRights Send-As
Active Directory operation failed on <DC fqdn>. This error is not retriable. Additional information: Access is denied.
Active directory response: 00000005: SecErr: DSID-03151E07, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
+ CategoryInfo : WriteError: (0:Int32) [Add-ADPermission], ADOperationException
+ FullyQualifiedErrorId : FE24751F,Microsoft.Exchange.Management.RecipientTasks.AddADPermission
What could be the problem, considering the items below :
- inheritance is not broken to the level of the distribution group object
- the account used to run the cmdlet is a member of the Organization Management group
- creating a new distribution group in the same OU and running the command works as expected; checking the permission for this group against MyGroup (using Get-DistributionGroup testgroup | Get-ADPermission | Sort-Object User,AccessRights | ft user,accessrights,extendedrights,properties)
shows no differences.
- adding the permission using ADUC results in the user being able to Send As the group, however I'm trying to find out the root cause of the Powershell cmdlet execution problem
- there is no Deny permission on the group's ACL
- the group didn't have the "Hide Membership" feature of Exchange 2003 applied, so there shouldn't be any non-canonical ACL issues

Anyone ever come up with a solution to this? I get something similar when Activesync tries to create objects on user containers.
Exchange ActiveSync doesn't have sufficient permissions to create the "CN=Test User,OU=Domain Users,DC=domain,DC=com" container under Active Directory user "Active Directory operation failed on DELL7S09.domain.com. This error is not retriable.
Additional information: Access is denied.
Active directory response: 00000005: SecErr: DSID-03151E07, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0
Make sure the user has inherited permission granted to domain\Exchange Servers to allow List, Create child, Delete child of object type "msExchActiveSyncDevices" and doesn't have any deny permissions that block such operations.
Details:%3
So...I get this after I introduced a MS Exchange 2010 SP3 RU8 server into my environment. You can find LOTS of people suggesting the same fix but I've not found anything that deviates from those fixes: check the "inherit permissions",
and give full permis to msExchActiveSync devices for the Exchange Servers security group, blah blah.
I got to this point by following a Migrate to Exch2010 paper by MS. I have no Win2k servers, my old Exchange server is Win2003r2SP2 with Exch2003SP2 fully patched. The Exch server is also a DC. I installed a new 2012r2 server and then patched
it. Installed Exch2010SP3Ru8 and all seems well.
The old Exch2003 server is still in production. My iPhone army connects remotely for mail, and all works great. I created a new Test User in AD, gave it a mailbox on the 2003 server, and waited a bit. It eventually shows up in the Server
Manager on the new 2010 Exch Server. I send it a bunch of emails, connect to it with an outook client on a Win7 machine, all works. I go to the SM on the 2010 box and migrate the mailbox to the new server. It works. I can connect with
outlook, send receive mail to other users in the org. I then try to connect with my iPhone and I get the message in Event Viewer over and over.
Went so far as to Promo the new 2012 server to a DC. seems to be fine. Now am wondering if I Demote the old Exch2003 server will it help...or cause a new crop of issues....

Improve the performance of the data activation on DSO.

Hi,
I would like to improve the performance of the data activation on DSO. 1000 records should be uploaded by 10 minutes.
Now it takes 10 minutes to activate data in DSO. And it is strange that it takes long time ( about 9 minutes) before starting activation.
ex :
in the request task log of the activation:
data activation 15:10:00
main process 15:10:01
technical status 15:10:21
But activation is started at 15:01:00 here. (this is started via process chain).
I have no idea why it takes so long time and how I can improve.
Kind regards,
Masaaki

Hi,
Try this also.
1. Remove Bex Reporting check box in ODS if not required.
2. Goto manage ODS -> activate -> activate in parallel -> increase the number of processes from there.For direct access try TCode RSODSO_SETTINGS. Not sure this is possible in your case.
thanks,
JituK

Issue related with the Date Format --- error when activating the DSO

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...
Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
is there any routine to solve this or i have to go for data selection in info package ......
I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
Value '20101402' of characteristic 0DATE is not plausible
Thanks
Baskar
Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
Value '31122009' of characteristic 0DATE is not plausible
Thanks
Baskar

Failed to mount database "General Users". Error: An Active Manager operation failed

Failed to mount database "General Users". Error: An Active Manager operation failed. Error: The database action failed. Error: Database 'General Users' on server 'EX02' cannot be mounted due to a previous error: At '12/3/2014
3:52:17 PM' the Exchange store database 'General Users' copy on this server appears to be inconsistent with the active database copy or is corrupted. For more details about the failure, consult the Event log on the server for other storage and "ExchangeStoreDb"
events. A successful failover restored service. If you have addressed the underlying problem, or if you have decided to attempt to mount the database despite this error, the mount operation may be attempted by using the '-Force' parameter of the Mount-Database
cmdlet. [Database: General Users, Server: EX02.domain.com]
Md. Ramin Hossain

Hi,
From your description, it is recommended to suspend the failed database copy at first using the cmdlet below.
Suspend-MailboxDatabaseCopy -Identity "xxx"
And then reseed the database with a new copy using Update-MailboxDatabaseCopy -Identity "xxx" -DeleteExistingFiles cmdlet.
What's more, here is a helpful thread for your reference.
Update-MailboxDatabaseCopy
http://technet.microsoft.com/en-us/library/dd335201(v=exchg.150).aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Activation of DSO failed

Similar Messages

Maybe you are looking for