Activation of Function Location field in Fleet Objects

Dear All
In Fleet Management, the Function Location field is inactive by standard. How can we make the Function Location field active for usage?
Regards
BK

hi
For your equipment category mark the installation at functional location in T code OIEP
regards
thyagarajan

Similar Messages

How to display field Functional Location Field in Asset Master Data

Dear Experts,
I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
Thank you
Best regards,
Frans

Dear Frans,
I am sorry this is not possible.
Note 140482:
The field was created as a precaution. However, it is not being used at
present and consequently is not supplied.
In particular, you cannot use the field as a criterion for a selection
in Asset Accounting reporting. This is still true even if this field has
been included in the selection view delivered for the dynamic selections
by modification.
regards Bernhard

Functional Location field is Grayed out in change mode

Dear Experts ,
I have created an equipment automatically through serial number managed material .
But the equipment created has no functional location assigned to it .
Also when in change mode of the equipment the functional location field is grayed out & there is no provision to dismantle & reassign the same .
Pls tell me how can i assign a functional loaction to this automatically created equipment ??
Regards
Anis

Hello Thyagrajan ,
In IMG ...
Equipments --> Equipment Uasge Period --> Define Installation at functional Location
I have put a tick for the checkbox " Inst . at Func. Loc" against the said equipment category
Is ther anywhere else in IMG that i need 2 assign/check .
while trying 2 assign a functional location for this equipment the system give the error :
No InstallLocation entered: Data transfer not possible
Message no. IA036
Regards
Anis
Edited by: anis bazmi on Oct 26, 2009 9:48 AM

Euipment or Function location field Mandatory in Work Order

Hi
How to make either Equipment or Function location ( either of the one) mandatory in Work Order.
Thanks ini advance
Thiyagarajan

Hi ,
The field equipment or f.loc can be made mandatory using transaction variants -- but it would be applicable for all order types .....
1.use tcode SHD0 , give IW31 in Transaction code and ZIW31 in transaction variants and press create ..
2.this would take you to IW31 initial screen and enter planning plant and order types and press enter this would give the dialog box of screen variant .Here press continue and this would take you to inside screen .
3.Here you again press enter and by entering some required data you can finally reach to screen variant of reference object
and can mark the equipment or f.loc field mandatory as required .
4.Once this is finished you can you can select local object and save ... and come back and test the same ... now this trans varint ZIW31 can be assigned to user group ...
go thru the documentation of SHD0 for bette information
regards
pushpa

Functional Location Field In AS02 (Time dependent)

Hi All,
I need to know if it is possible to add or show functional location in time-dependent tab(tcode AS02), because i found TPLNR(functional location) in table ANLZ. Fyi, ANLZ is the source table of time-dependent tab in tcode AS02.
Really appreciate your help
Thanks

Dear:
First see layout assigned to your class through OAOA and then go to the path SPRO....Financial Accounting...Asset Accounting...Master Data....Screen Layouts...Define screen layout for master data...select layout...logical field group...select time dependent data...field group rules.. There you will find 89 (functional area)... Make its status optional or mandatory whatever you require.
This will show the field in AS01 for data input.
Regards

Equipment & Function Location Fields

Hi All
Can any one help me out.
Fields Equipment and Function Location are not refelecting in operation tab of general task list..in my Dev system
but when i test the same in IDES its refelcting there
I try to sort out this issue via Task List Field Selection.. but still helpless.. couldn't find these fields here also to make it unhide..
Thanks in advance
Regards
AK

Hi Kapil,
As I know there is no field for Equipment or FLock, as this is the general Task List and can be used in any Equipment.
If you are using IA05, there wont be any Equipment or FLock field in the same.
In IA01 you can Definitely find the same as this is the Equipment Specific Task List.
and IN IA11 you can find the field for the Functional Location.
Please check again.
Regards,
yawar Khan

How can I relate an equipment with the PP Work center & functional location

Hi,
I'm trying to relate equipments with their PP work centers (field ITOBATTR-ARBPL listed in the Location tab of the equipment) and the functional location (field ITOB-TPLNR listed in the Structure tab of the equipment) through SQVI.
The workcenter is in a structure and the functional location relation in table ITOB gives me thousands of results with different functional locations per equipment so I can't tell which one is the propper one.
Additionally I would like to filter the equipments flagged for deletion, but I also can't find the field of thet flag).
In resume I need to create a query that gives me all equipments not flagged for deletion with their corresponding PP Work center and functional location.
Thanks in advance
JV

Please check table EQUZ or view V_EQUI.
In table EQUZ (GEWRK is the work center object number ) -> Use this go to table CRHD and find ARBPL for the correct time slot.
For fucntional location in EQUZ (ILOAN is the location assignment ) -> go to table ILOA with the ILOAN and fetch TPLNR.
Please ensure you fetch records which are currently valid from EQUZ (Use the valid to date field compare . Valid to date must be greater than or equal to current date).

Replication of functional location and equipment from ECC to CRM.

Hi Guys
I have activated the required BADI's and adapter objects for func loc and equipment. but i am not able to replicate the funcloc and equipment from ecc to crm.

As of SAP CRM 7.0 you can replicate functional locations from SAP ERP to SAP CRM. This function is supported as of SAP enhancement package 4 for SAP ERP 6.0.
In SAP CRM, functional locations are represented as object components of an installed base. The structure of functional locations is also replicated, and reflected in the installed base structure. If you replicate functional locations and pieces of equipment, the assignment of equipment to functional locations is also reflected in the installed base structure. The following replication processes are available:
- Initial download of functional locations from SAP ERP to SAP CRM in R3AS tcode.
Bye,
sekhar.

Partner data from Functional Location to Equipment

Dear Expert,
How can I transfer partner data (Bill to party, Ship to party) from Functional Location to Equipment. I have tried with 'Install with data transfer' but there is no option available for partner.
Is there is any other way to transfer partner data while assigning Equipment to Functional Location.

Hi,
Functional Location:
Define field selection for partner data fields : Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations --Field Selection for Multi-Level List Displays of Functional Location.
The Partner tab should be visible in the functional location: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service-- Technical Objects-- General Data -- Set View Profiles for Technical Objects.
Assign functional location category to partner determination procedure: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations -- Define Category of Functional Location.
Define field selection for partner data fields
Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --Equipment -- Define Field Selection for Multi-Level List Displays of Equipment.
The Partner tab should be visible in the equipment
Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --General Data -- Set View Profiles for Technical Objects
Assign equipment category to partner determination procedure
Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service --Technical Objects --Equipment -- Assign Partner Determination Procedure to Equipment Category.
Regrads
bharat

How to findout the Function module for a particular object

Hello friends,
   Related to my thread, there was one thread in the forum,to find out the function module for a particular object.I tried the solution provided my our experts but couldn't got the results.Thats why i am putting this thread again.
I want to find out the function modules used for the particular object, i.e. Production order.
   solution i tried is, first go to T.C SE37, then in function module field put the object name like Production order and enter, than it will show another screen, there also put object name in function module field and than press enter, it will show all the function modules available for that object.
    So could you guys help me out to find out where i am wrong in the process of finding out the function module for a particular object.
                       Plz don't bother abt the point.Helpful answers will definitely get awarded.
                            Thanking you guys for your valuable support till now and hoping to get in future too.

Dear
When the problem is solved please give points too. Otherwise why people will help others, give time and share their valuable knowledge. This will build up self confidence.
If not solved and closing, then mention the difficulties what u exactly looking for. Simpy closing is not enough because who ever is providing solution will not able to know the real problem.
How to give points I believe u already know that and need not explain.
I had seen many times this problem with others too. Even if the problem is totally resolved they give 2 in stead of 10.
Edited by: BNR on Sep 21, 2008 6:10 PM

Classification overview Data for the functional location in Emigall

Hi,
I am trying to upload the functional location for the connection object. and during that i would like to upload the Classification data through Emigall
Can i do that in emigall and do we have a function module or a BAPI for it.to do that.
Can anybody help me on this.
Thank you in advance.
Regards,
Robert

i don't think you can directly upload classification along with your functional location data in EMIGALL. But there is an object OBJCLS_D in EMIGALL that you can probably use. There is a BAPI BAPI_OBJCL_CREATE that may also be useful if you want to write your own program.

Functional locations from order to notification

Hello
We have a small problem regarding how the functional location field in the notification is filled. The user creates an order Iw31, and on his peronal settings there is defined a value for functional location, the top of a hierarchy. In the order he changes this value to the correct functional location, and everything else in the order, then he saves it and a notification is created (for some ordertypes) in that notification the functional location is not from the order, but from the personal settings, if we remove the personal settings the notification is updated correct. Is there a way to get it updated correct without removing the value from the personal setting?
Ivar

Its not possible when you set User Default values settings. Check the below links.
From SAP Help:
If you create notifications in which certain data is always the same, you can permanently define certain user default values to make it easier to create the notifications. The system automatically copies this default data into the appropriate notification fields. You can, however, overwrite the proposed information.
http://help.sap.com/saphelp_470/helpdata/en/3c/abc57c413911d1893d0000e8323c4f/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/2d/352680448c11d189420000e829fbbd/content.htm

How is functional location linked with work order tables

Hi, Experts:
I am working on a BW project to extract Plant Maintenance data from R/3 to BW system. We need to get work order data with related Functional Location data togather. When check the 2 tables AFIH for Work Order header and AUKF for Order master data, I don't see Functional Location field in neither of the 2 tables.
Can anyone please tell me how (by which table/field) Functional Location data in table IFLOT is linked to a Work Order stored in tables AFIH and AUKF?
Many Thanks,
Jenny

Hi, Thyagarajan:
Thanks for the reply! I tried to get the values of ILOAN from table AFIH. And pass the value to the field ILOAN in ITOB. However, no data returned from ITOB. The ILOAN in AFIH has different set of values from the ILOAN in ITOB.
Any suggestions?
Thanks,
Jenny

Functional Location should Auto Populate when installed Equipment is select

Hi All,
In our client I have made the Functional location mandatory field during the Notification and Maintenance Order creation.
When a Work Order or Notification is created with Equipment number then Functional Location is not automatically populated.
If we create Notification and Order through IH01 then only functional location is coming automatically but I need through IW21 and IW31.
Can anybody please tell me how I can achieve this functionality?
Thanks
KAVS

Hi,
The functional location will be automatically populated in IW21/31 when you enter the equipment. However there is a problem if you make the functional location field mandatory. In that case the system expects user to fill the functional location field before any logic is executed to set a default. The screen processing, including checks for required fields, is processed first. So an error will be generated asking the user to fill the f/loc field. They will not be able to proceed until the field is filled by user input.
The solution is to not make the functional location field mandatory. You can then implement exits QQMA0014 (for notifications) and IWO10009 (for orders) to check that functional location field is not empty.
-Paul

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Activation of Function Location field in Fleet Objects

Similar Messages

Maybe you are looking for