Activation of function-pool
while activating include.....top of function group m getting report program statement missing or program type is include?plz help
Hi
Go to SE80 and select Function Group and ente ztxb end press enter.
you can see the Function group and to make sure you are in the main Program double click again.
Now click right mouse button and select activate
Hope you can overcome the problem.
Regards
Ramchander Rao.K
Similar Messages
-
Hi all,
I'd like to confirm which Domain/Forest functional levels of Active Directory is supported for "Active Directory Resource Pool Synchronization" in Project Server 2013.
I guess that 2003 or later is supported, but my customer required reliable sources.
I googled and searched article at TechNet, but I couldn't find.
Could anyone inform me the article about that?
Thank you in advance.
Kaori.Hi Michael and all,
Anyway I solved this issue.
I couldn't find article that I desired, so I asked advice to my colleagues and they told that the functional level 2003 or later are supported in their experience.
In addition, I found these articles about SharePoint sync limitations.
Members of the domain local group cannot view a Microsoft Office SharePoint Server 2007 Web site
http://support.microsoft.com/kb/932378/en-us
SharePoint supportability of Read only Domain controllers
http://support.microsoft.com/kb/970612 -
Hello,
I'm trying to copy a system function pool using Program-Copy function from SE38 and change it's name but the system generates an error.
What is the correct way of copying a system function pool?
Thank you.Already tried se80..same error:
Runtime Errors RAISE_EXCEPTION
Short text
Exception condition "NO_FUNCTION_POOL" raised.
Error analysis
A RAISE statement in the program "SAPLSUNI" raised the exception
condition "NO_FUNCTION_POOL".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Hope this helps.
Thanks -
Error message while activating a function
Hello guys
I have just written a simple function and am trying to activate it.
When I click on check button it says 'no syntax error'. However, when I click on activate button, I get the following error. Any feedback on this will be greatly appreciated.
Error Message:
=================================
Function Module ZBAPI_XI
The main program of the function "ZBAPI_XI" does not begin with
"FUNCTION-POOL".
=================================
Thanks
RamHi,
Try this..
GO to SE80..
Give the function group..
Then activate the main program..
Thanks,
Naren -
Error while activating the function module
hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthikhii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta -
The function pool 'SAPLRSDRC' is not available
Hello Expert,
To define the virtual cube with function, 'SAPLRSDRC' is required.
However, in my system, this function pool is not existed.
Do anybody know why?
Thanks
XYliel_noy wrote:
and how i do it?
You might find this helpful for general knowledge regarding Macs.
Mac 101 -
Subscreen selection screen for function pool program
Hi,
I have a requirement wherein i need to make the parameter field flexible( meaning can exclude, include values etc). Same function as select-options. The parameter was created in a dialog progmming.
The problem here is that i am using function pool. I have tried to use subscreen but it is only applicable on report program. Is anyone knows if this is possible. Or is there any way to make the field as select-option without using call subscreen?
Please help!
Thanks in advance!Hi,
No need to create separate Fields ,only create as parameter.
for your Reference check below code.
DATA : lv_title TYPE sy-title,
ls_description TYPE rsfldesc,
lt_selopt TYPE STANDARD TABLE OF rsdsselopt.
PARAMETER : p_field TYPE ausp-atwrt .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
lv_title = 'TEST'.
ls_description-type = 'C'.
ls_description-length = '30'.
ls_description-olength = '30'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
title = lv_title
description = ls_description
help_field = 'AUSP-ATWRT'
TABLES
range = lt_selopt
EXCEPTIONS
no_range_tab = 1
cancelled = 2
internal_error = 3
invalid_fieldname = 4
OTHERS = 5.
IF sy-subrc NE 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
We installed a new system and imported the syncbo definitions to this new system.
After the import and generation of all T01 SyncBOs we get an error. E.g. for MAM25_016:
Function modules from the function pool Z_MEREP_GEN_T01_MAM25_016 contain syntax errors
Message no. MEREP_00530
After investigation the following syntax error is shown:
Source code LZ_MEREP_GEN_T01_MAM25_016U04 Line 641
The FORM "MAM25_016_CONV_NAME" does not exist, but there is a FORM with the similar name "MAM25_016_I_CONVERSION".
"MAM25_016_I_CONVERSION".
We are already using three systems D -> Q -> P. The export/import of files between these systems work okay. But not with the new system. All are on NW04 SPS 18. In the other systems the form is available.
Does someone have an idea how to solve this?
Thanks in advance,
Benjamin de RijkeHello Rahul / Karthick,
Thanks for the tip, I already reimported these with no effect. Next to this I deleted the function modules for a Z-syncbo (our own developed one). But this didn't help as well. The MAM-SyncBO function group can not be deleted because the system is not a developement system. We are not allowed to develop things in this environment.
I have the feeling that it has something to do with the initial setup of this system. All the others were first on SPS15 were we developed the SyncBOs. At a certain time we updated the systems to SPS18 and developed further. No issues so far regarding the import / export of the files from D to Q and P.
Now we initial installed a new system on SPS18 and on this one the generation failes with the mentioned syntax error.
Kind regards,
Benjamin -
Calling a Function Pool inside a Class
Hi,
I want to call a Function Pool inside a Class Method. I am getting an Error that 'Report or Program Statement already exists' when I call the function pool in the method. can anybody help me on how to call a Function Pool inside a class method.Hello Krish
Based on your error description I assume that you have tried to "insert" the function pool program (e.g. function group ZFUNC -> SAPLZFUNC) into your class.
You cannot do that. The explanation for the error message is a following:
- The class contains already a program statement (CLASS-POOL). If there is somewhere in the class an additional program statement (e.g. FUNCTION-POOL) you will get the error.
In addition, you cannot "call" a function pool. Instead you can always call the function modules of your function group.
Regards
Uwe -
Function Pool & Function Group
Hi Abapers,
I need some information regarding the function group & function pool are client dependant or independant ?
And where we can check it ?
Thanks
NaniHi,
Function Pool and Function Group are one and the same thing.
Just when we view the Program for the Function Group it shows as Function Pool. When we view the Function group associated with Function Module, it displays Function group.
This can be viewed using SE37--> Goto --> Function Groups --> Display/Create/Change
The Program can be viwed using SE38.
Juts concatenate SAPL before the Function Group name and view it in SE38.
Regards
Himanshu -
Active business function RE_GEN_CI_1
Hi experts,
I have installed SAP ERP 6.0 EHP4 Ready - Support Release 1, ABAP-based
I want to active business function RE_GEN_CI_1. But I cannot find RE_GEN_CI_1 in T-code SFW5, what wrong?
Please help me,
Thanks so muchHi,
business function RE_GEN_CI_1 is part of software component EA-APPL. Have you installed EA-APPL already and activated EA-FIN? Please refer to SAP note 628208 for further information about prerequisites for activation of RE-FX.
Regards,
Franz -
Active business functions for IS-OIL Downstream
Dear all,
I have system NW701/ECC6, and upgrade EhP4.
Now I want to active business functions for Downstream, in tcode swf5, I select Business functions set OIL&GAS, I found a lot of business functions:
BUSINESS_FUNCTION_BASIS_COM Business Function Basis (COM)
COMMODITY_MGMT_&_BULK_LOGISTIC Commodity Management and Bulk Logistics
COMM_MGMT&BULK_LOG_1 Commodity Management and Bulk Transports
ISR_RETAILSYSTEM Other Enhancements for SAP Retail
LOG_COMMODITY_TRANSPORT_MGMT_4 Commodity Management and Bulk Transports 2
OIL_PRODUCTION Upstream Production Management
OIL_REVENUE_ACCOUNTING Upstream Revenue Accounting
REMOTE_LOGISTICS_MANAGEMENT Remote Logistics Management
Can any one help me, what business functions do I need to active for Downstream ?
Thanks all,
Thanh.I create customer message ask SAP and these are downstream functions need to active:
1. COMMODITY_MGMT_&_BULK_LOGISTIC (ECC 6.0 )
2. BUSINESS_FUNCTION_BASIS_COM (EhP3)
3. COMM_MGMT&BULK_LOG_1 (EhP3)
4. LOG_COMMODITY_TRANSPORT_MGMT_4 (EhP4)
Thanh. -
How to activate uni code check in function pool.
hi experts,
how to activate uni code check in function pool.
pls give needy
regards,
praveenhi praveen,
for every report we can check unicode flag in the attributes.
function pool is also a type report.
for classes it is not possible to enable directly.
for this we have TCODE UCCHECK.
enable it by using above. -
Hi,
Had some questions, would appreciate if somebody could help answer.
1) If I want to do a BDC on TCode T1 and if BDC is successful on T1 then do a BDC on Tcode T2 (all in the same program), Can we do a BDC using session method on multiple transactions in one session?
2) Can you call a screen from a function pool?
Thanks in advance.
MickHi Venkat,
I do not have a real life scenario, but this question came to mind when I was trying something.
But hypothetically consider a scenario where I create Purchase Orders using BDC and then if the BDC is successful then immediately do another BDC for Goods Receipt. This could also be part of some cleanup exercise where I want to do BDC's on 2 TCodes, the 2nd one only if the 1st one is successful.
Regards,
Mick -
Function pool relation to Function group
Hi friends,
Could you please clarify for me how the 2 are related? I can understand function group but not sure what is function pool and how it relates to function group and function module.
I have searched the online help but its not clear to me. Please give me simpler explanations.
Thanks
SriHi Sri - When you interact with a function group you are using an interface which uses the ABAP code contained in a function pool. A function group will always be in only one function pool and a function pool will always have only one function group. The function pool is the parent program of the function group. Each function module is an ABAP include in the parent program. Likewise when you interact with the function module you are using an interface that uses the ABAP include.
When you debug into a function module you will always see the main program as the function pool and the source code is the ABAP include of the function module because that is the code that is being executed. Usually SAPL prefixes the function group to create the name of the function pool.
Hope this helps.
Andy
Maybe you are looking for
-
Can I get an old version of Imovie to macbook OS X 10.6.8
Can I get an old version of Imovie to macbook OS X 10.6.8?
-
I was unable to recover my Pictures and Videos after updating to ios5.1 ,please how can I recover my pictures and videos which was lost after updating to ios 5.1 on 12.11.2011
-
CWMS HA and MDC in the same time
Hi, One of our customer has Main DC and DR. He is required to have CWMS 2.5 in Main DC with HA for 250 ports and in case Main DC is down ,DR will be the backup which contain CWMS 2.5 for 250 without HA. He is required to have both Main DC and DR to w
-
Hardware sizing recommendations for B2B Server
My customer Welch Foods Inc. is on 11i Oracle eBusiness Suite and is planning to uptake the latest 1Sync integration features in the PIM product. For out-of-box AS2 connectivity with 1Sync - they are planning to use Oracle B2B Integration Server 10.1
-
Exporting Final Cut Pro 5 EDL´s to Adobe Premiere Pro 2.0
Is it possible? Please tell me how... Thanks, Clark Nova