Activation of genric datasource warning

hi all,
activation of genric datasource in rsa6 gives warning error.
and the not getting activated . my DS extracts from MARA table.
the warning "The even-numbered length of the DEC field MHDHB can lead to problems"
thank u

Hello Rakesh,
Its a bug. If you can change the lenght of the field MHDHB to an next odd number this will be solved.
See the note
Note 1118115 - Error RSMDS 024 for selection of amount field w/ even length
Note 603453 for Reference (its from IS)
Thanks
Chandran

Similar Messages

  • I have activated the standard datasource in r/3? how to identify active?

    Hi All,
    i have activated the standard datasource in r/3 ? and i have replicated the same in the bw system and in the source system of r/3 i have replicated it and i can find the data source there ? but how to identify whether the datasource is active in the bw system or not ?
    i cant see a tick mark on the data source does it determine it is active?
    Pls guide me on this?
    thanks
    Pooja

    Hi all,
    I am working on 3.5
    And where can i find the datasource is green or not? it is not assigned to the source system i can identify it?
    i am not able to rightclik on the datasource and see the active version.
    When i right click on the data source i can see this option:
    1. assign infosource
    2. maintain datasource in the source system etc?
    Thanks
    Pooja

  • Getting Error while creating Genric Datasource

    Hi,
    I was try to create genric extracter where i was getting error
    While creating view genric extracter where i am getting error "Entry A ZV_ZFRT  does not exist in DD02L - check your entry".
    My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
    Which extracter i need to create as given scenario?
    Does view will fullfill with my requirement or any other extracter.
    Please some one can help me in this scenario.
    Answer would be great appreciate.

    Hi,
    Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
    Refer this link:
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    Hope this helps.
    PB

  • Transporting active version of datasource from DEV to PRD

    Hi,
    When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
    Thanks

    Hi,
    Pls Refer this link for details about transporting BI Objects
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
    Hope this helps,
    Regards
    CSM Reddy

  • Error generating/activating WebService BW DataSource

    Hello,
    I created a BW DataSource using WebService in BI7 and I got the following errors when trying to activate it.
    Error generating Web service /BIC/CQZBRSDAT00001000
    Message no. RSDS301
    Error when activating DataSource ZBRSDATA                      WEBSERVICE
    Message no. RSO404
    Could anyone please advise for any inputs/tips for the issue? I found below two threads but the OSS Note 913944 appreantly does not exist anymore (not sure if it is being removed, updated, etc).
    Web service data source - error RSDS301
    Problems with DataSource Web Service BI 7.0
    Thanks & Regards,
    Andy

    Hello
    We will move this thread to the [SAP NetWeaver BW|SAP Business Warehouse; forum as this is not a PI specific issue. You will have a better chance of getting a quality answer to your query on this forum.
    Regards
    XI/PI Moderator

  • Does pure activation of BCT DataSources decrease performance?

    Hello,
    if I just activate (all) datasources from BCT in an ECC system (without actually using them for data uploading to BW), does this decrease any performance in the ECC? Or is it performance wise neutral as the activation only creates some metadata?
    Full points will be assigned!
    Thanks a lot,
    German

    Hi,
    keep in mind, that the Data for BW is taken out of the DeltaQueue.
    Before the Data achieves the Deltaqueue it is either stored in VBDATA or else in another QRFC-Queue (I call it extraction queue). From where its coming into the Deltaqueue is controlled by the method maintained in the logistics-extractor.
    The VBDATA is the table where ALL POSTING RECORDS ARE STORED!
    So when you have activated the extractors for logisitcs, all posts of documents in the system (e.g. Sales docs ...) run through the VBDATA as well as the V3-Posts of these documents for R/3.
    If the V3-Programs are not scheduled, there will be an overflow to the table and the system is dead, means none can post any documents.
    This can only occur if unseralized V3 is chosen.
    Delta Queued writes data into the QRFC-Queue.
    As long as you haven't run the V3-Programm it will stay there.
    The V3-Programm takes the data and writes it to the DeltaQueue for BW.
    If no successful init has taken place, the data is gone then.
    The request from BW only takes the data out of the delta queue, not out of the extraction queue I've descirbed earlier.
    Cheers
    Sven

  • Activation of ERP Datasource

    Hi All,
    I need to activate DataSource  in ERP to be replicated into BI. When I am doing this I get an error as below.
    Changes to Repository or cross-client Customizing are not permitted.
    Is this an authorization issue with the permissions.
    Appreciate your inputs.
    Kind Regards
    James

    Hi,
    Are you working in the right client in the dev ECC system? We should be activating datasources in the customizing client/golden client in ECC dev. The datasources once activated get copied to the client which is connected to BW. Some changes to datasources like enhancements will not be copied accross clients automatically. We then use SCC1 transaction, give the transport number generated while making changes, to copy across clients.

  • Activation of Processchain with warning. But why?

    Hello
    I have a Process Chain. While activating I'm getting this warning:
    A type "Read PSA and Update Data Target" process cannot precede process "Execute InfoPackage" var. ZPAK_093PCHBB696Y4SA1KW7HIQP2C in the chain
    But the Chain is running fine. So what does it mean?
    Thanks

    Hi,
    Warnings are not a problem, check in SAP help
    http://help.sap.com/saphelp_nw04/helpdata/EN/9e/e3f69e54b93f40b4dc1433e6378195/content.htm
    Can't put "ODS activation" before an "Update from PSA" on process chain
    Thanks
    Reddy

  • Problem in activating the Hierarchy Datasource for 0CostElmnt

    Hello Experts,
    Can you please suggest, how to activate the standard hierarchy datasource -0costelement for mapping it to the respective hierarchy (0CostElement). For this I have replicated the datasource and activated using BI Content. But inspite of this, respective datasource is not getting activated in SAP BI.
    So can anyone suggest me how to activate the datasource.
    Thanks
    PT

    Hi PT,
    Based on your SAP patch level & error message number, y need to apply SAP note to resolve this error. If you provide correct error message, so we can suggest. Try to active business content grouping the before & after words. Sometime dependent objects my missed also y may get inactive in Transfer rules.
    Thanks & Regards,
    Krishna.

  • InfoSource Activation failing: COPA Datasource Object Version not found

    Hi Experts,
    I am using BW3.5 & R3 (ECC 5.0) and did::
    In BW
    1) Installed Business Content
              Cube:         0COPA_C01
              InfoSrc:      0CO_PA_1
    In R3
    1) I created a new  COPA datasource (1_CO_PA500IDEA10)
       and verified  data in RSA3.
    In BW
    2) Replicated the DataSource
    3) Created a new Infosource (BB_CO_PA500IDEA10).
    4) Editing the new IS, I copied all characteristics
       from the template of  the InfoSource  0CO_PA_1.
             a) Assigned my COPA DS (1_CO_PA500IDEA10).
             b) In "Transfer Rules" tab I was able to map
                ALL the IS fields to DS fields.
             c) In "Datasource/Transfer structure" tab
                some fields are left blank (I didn't assign
                any IS characteristics or KeyFigs)
    Saved the IS.
    BUT Activating the IS is failing with the error:
    Object 1_CO_PA500IDEA10 object version  not found in table
    Message no. RSAR768
    A couple of times, I deleted the IS in BW, DS in R3, created them again, replicated, .......with no luck
    Any help is appreciated?
    Thanks, BB

    Dear A.H.P
    I admire your energy!
    I took a look at the RSBASIDOC table entries in BW and ECC systems for the SourceSystems:
       1) ID3CLNT506 - that is working
       2) T20CLNT400 - that is NOT working
    I copied some of the fields as a table below. Please take a look. I inserted ** as a field separator to keep the "text fields seperate".
    Three relevant fields:  BIDOCTYP, SBWBCRL (blank in BW) & RBWBCRL (blank in BW) are not the same between BW & ECC systems - For the problematic  T20CLNT400.
    Is  SBWBCRL - The BW Service API version in ECC ?
    Is  RBWBCRL - The BW version in BW system ?
    I will take a look at the Inbound/Outbound paramaters in WE20 on both  BW & ECC.
    It seems I am doing all this to convince our BASIS guys that THEY need to FIX the problem.
    THanks, BB
    Table:          RSBASIDOC Entries
    BW  SourceSystem  ID3CLNT506  - which is working
                in BW          **in ECC
    SLOGSYS     **ID3CLNT506     **ID3CLNT506
    RLOGSYS     **SBW            **SBW
    BIDOCTYP    **ZSSC085        **ZSSC085
    TSPREFIX    **SC             **SC
    TSTPNM      *SAP           **RFCUSER
    TIMESTMP    **20.060.226.192.529   **20.060.226.192.529
    SBWBCRL     **30C            **30C
    RBWBCRL     **350            **350
    BW  SourceSystem  T20CLNT400 is giving  problem during InfoSource Activation
                in BW          **in ECC
    SLOGSYS     **T20CLNT400     **T20CLNT400
    RLOGSYS     **SBW            **B3TCLNT800
    BIDOCTYP    **ZSSB004        **ZSBB216
    TSPREFIX    **SB             **BB
    TSTPNM      **USER01         **USER12
    TIMESTMP    **20.051.023.080.630     **20,060,213,213,230
    SBWBCRL     **(Blank)        **30C
    RBWBCRL     **(Blank)        **310

  • Genric datasource using FM to extract quantity with out unit fields

    Hi All,
    I have a situation where i need to extract data from one custom table with 5 fields. one filed is quantity but i created structure and also the refernce fields for quantity in it. i wrote a program also which is fine. but while creating a datasource it is giving error that particular field in the extractor is hide and unable to craete the datsource. could someone tell me how to proceed further.
    Regards,
    sekhar
    Edited by: Sekhar Reddy on Oct 21, 2008 4:40 PM

    HI,
    The structure you created for DataSource is wrong, because genarally this kind of error will come for Qty and Currency unit, so take ABAPer help and create structure.
    I also got the same error, but that table was designed by ABAP team, so I informaed to that team then they corrected that table.
    Thanks
    Reddy

  • Delta in Genric datasource

    Hi Experts,
    How to test delta for generic datasource.
    will the delta goto lbwq for generic datasource or straight away rsa7?
    Regards,
    Anand

    Hi,
    For generic data source, delta will be seen in RSA7 not LBWQ.
    Generic datasource  to have a delta capability, your table or view should have either time or date field.
    Thanks
    Srikanth

  • Verify site permissions to publish to Active Directory SCCM 2012 warning!

    Hi there I corrected the problems as it says in your report but sitll coming back, any other solution how to get it  done.
    I do thank you for any help.

    Are you running the pre-requisites for ConfigMgr?
    If you have delegated the Primary Site server computer account Full control over the System Management container you need to restart the server for this to take effect.
    If you have already done this and you are still getting the warning- carry on with the installation. I've seen this happen and everything has been OK after the install.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson
    I am in the same experience as Gerry, but would like to add that you *always* get this error if the permissions have been applied using a group membership instead of directly added to the computer account in AD.
    Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

  • Help! error occured when activating DataSource 2LIS_06_INV

    Hi,experts
    When activating BI content DataSource 2LIS_06_INV, one warning message populated, 'the text of DataSource 2LIS_06_INV is not maintained in language D ' , and this caused the failure of activating 2LIS_06_INV,
    please somebody offer me help, how could I correct it? Thanks,  _

    Hi Wilson,
    Similar issue I was resolved with help of basis team.
    They used SO10 transaction code creation of standard text for desired client.
    Please take help from Basis Team.
    Regards,
    BBC

  • Error while activating the datasource during migration

    Hi Guys,
    When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
    Error in activating the datasourc----RSO404
    Has anyone encountered this issue? Your input is highly appreciated.
    Regards,
    Doniv

    Voodi,
    Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
    Doniv

Maybe you are looking for

  • How do i get my apps back on my mac

    I upgraded my os from 10.4 to 10.6. now when i connect my ipod touch, it tells me my ipod touch is synced to another computer. how can i get the apps on my ipod touch back to my mac so that i can sync them? I really don't care for my music, photos, a

  • Adobe Reader 9 Won't open at all

    Randomly my adobe reader stopped working. It won't open PDF's from google chrome or IE. I've tried restarting my computer, installing Reader X, and tried reinstalling reader 9...nothing has worked. Also, adobe reader won't even open

  • Photoshop Layers unexpectedly and individually becoming distorted in FCP7

    I've got a PSD file I am importing into a timeline in FCP 7. I open up the PSD file, copy the layers, and paste it into the standard DV timeline. Once the layers are pasted into the timeline, they become totally messed up. Some layers are completely

  • PA30 - Changing personal data of one employee changes data to others also

    Hello, I have a strange problem. When I am changing the personal data of an employee in PA30 this change is affecting several employees also. This means at the moment that I have people that have connected data like the same name and so on... Could s

  • New on here

    I've been reading on here that Credit Karma isn't good to look at the score, just use it for the data in the TransUnion and Equifax reports.  I was wondering though, why it said a negative factor for me was "no inquires for credit?" I haven't applied