Activation of Hierarchy
Hi,
We have uploaded pc hierarchies from ISP to IWP on 25.05. Normally the
hierarchies without aggregates should be activated immediately after
the upload and the hierarchies with aggregates should be activated
after we start the change run job.
But until now, after 2 change run jobs are finished, the hierarchies
are still not activated.
Those hierarchies with aggregates should show a "pre-book" button in the
InfoObject when there are modified versions. But we notice that the
buttons are not set for the hierarchies.
I have to manuelly set the pre-book activation manuelly.
Regards,
Anita
Hi Gianfranco,
We are loading hierarchy weekly.As the hierarchy is using aggregate we cant activate it directly.you need to flag it for activation.This you will be doing in Infopakage.I have checked the flag for automatic activation or flag for activation.So during change run the hierarchy should get activated automatically.Change run gets executed without any errors , but the hierarchy is still not in active state .
Manually I have placed the prebook flag on hierarchy & executed atribute change run , then it worked fine .
It was working fine in SP19 , after upgarding to sp20 there is a problem in attribute change run.
please assist
Thanks & regards,
Anita
Similar Messages
-
Hello,
I am getting "Migration active source hierarchy" error in the SCCM 2012 SP1 prerequisite checker on the CM 2012 primary site. The error says "There is an active hierarchy configuration for the migration. Please stop data gathering for each
source site in the source hierarchy." However, actually there is no migration source hierarchy configured and there are no migration jobs displayed in CM 2012 console. We used to configure this feature to migrate CM 2007 to current CM 2012 without service
pack two years ago and we have deleted these configurations.
In migmctrl.log, the following record is being generated every 60 minutes.
======================================================
Connection string = Data Source=xxxxx;Initial Catalog=xxxxx;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Encrypt=True;TrustServerCertificate=False;Application Name="Migration Manager".~~ $$<SMS_MIGRATION_MANAGER><04-07-2014
01:01:53.710+300><thread=6992 (0x1B50)>
Created new sqlConnection to xxxxx~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]: Start two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 1. Query the schedule items that was running or requested to start immediately ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 2. Query the first item in order of DateNextRun ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.819+300><thread=6992 (0x1B50)>
[Worker]:
No item found. Sleep until the next event.~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[Worker]: End two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: the workitem queue is full!~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
======================================================
I am not really sure where to look into in this case. I would appreciate any advice.Hi,
Could you please upload the full migmctrl.log?
How about specifying a source hierarchy with the same name and password of the hierarchy before in the console, then click Clean Up Migration Data?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
For direct activation of hierarchy, Aggregates have to be deactivated
Hi,
There are 2 monthly master data hierarchies loaded.
We face some problem while loading the hierarchies.
Now the 2 hierarchies are seen as Modified version.
When I try to activate the hierarchies manually I receive the below message
"For direct activation of hierarchy, 0042 Aggregates have to be deactivated"
with 2 options as:
1 Prebook activation
2 Activate directly
What are these options?
Will affect on aggregates?hi,
Activate directly wlll directly activate the hierarchy....
Prebook for activation will capture it and it will be activated later at the time of the chnage run.
Always prefer Prebook for activation...
hope this helps.
regards,
Mahesh
Edited by: Mony Maheshsingh on Jun 24, 2010 4:22 PM -
Changing Activated Article Hierarchy Structure
Hi Experts,
Is it possible to change Activated Article Hierarchy in IS Retail ECC 6.0.
When i try to do in Tcode: WMATGRP02, system is throwing following Error Message.
"" Only limited changes are possible to active article hierarchies Message no. RTCMMD058
Diagnosis
Every change to an active material hierarchy has a direct impact on the
applications that use the data of an active hierarchy (for example,
merchandise planning, assortment planning, reporting, etc.)
Only limited changes to active material hierarchies are possible.
Changes are only allowed to the material assignment.
Node assignments can be displayed. ""
Any Input is highly appreciated.
Thanks and Regards,
Selvakumar. Mhi Selva, I'm curious on how the above has been resolved. I'm new to Retail and would like to get your inputs on whether an active hierarchy can still be changed and if so, what are the steps (trying to add another level to an existing node, e.g. new sub-department under an existing department). Appreciate your inputs. Thanks!
-
Problem in activating the Hierarchy Datasource for 0CostElmnt
Hello Experts,
Can you please suggest, how to activate the standard hierarchy datasource -0costelement for mapping it to the respective hierarchy (0CostElement). For this I have replicated the datasource and activated using BI Content. But inspite of this, respective datasource is not getting activated in SAP BI.
So can anyone suggest me how to activate the datasource.
Thanks
PTHi PT,
Based on your SAP patch level & error message number, y need to apply SAP note to resolve this error. If you provide correct error message, so we can suggest. Try to active business content grouping the before & after words. Sometime dependent objects my missed also y may get inactive in Transfer rules.
Thanks & Regards,
Krishna. -
Activation of Hierarchy encountered memory dump error
Hi Everyone,
I have scheduled an extraction for the material hierarchy but it encountered a memory error during the activation phase of the hierarchy.
I checked ST22 for the shortdump and it was about STACK_STATE_NO_ROLL_MEMORY.
My Basis says it was trying to access a memory that exceeded the system's limit.
Did anyone of you encouontered such a problem?
Is there any workaround for it?
Thanks.
Regards,
Shunhui.Hi,
Refer to the SAPNote: 758573. This says
Import the corresponding Support Package or implement the advance correction according to the correction instructions. If you implement the advance correction, carry out the following manual changes. Proceed as follows:
Call Transaction SE24, enter object type 'CL_UG_MD_CHAR_VALUE' and choose 'Change'.
Choose tab page 'Attributes' and insert the following entry in the next free row: Attribute 'DF_DELETING_NAMED', level 'Instance attribute', visibility 'Private', typing 'Type', associated type 'UG_FLG'.
Save and activate your changes.
Implement the corrections.
Hope this helps.Assign points if useful
Venkat -
Hello Experts
I re loaded hierachy for 0material, infopackage failed with error "Error arose when activating the hierarchy; Hierarchy not active
I tried activating using FM RRHI_HIERARCHY_ACTIVATE got error "There is no modified version for this hierarchy"
I am able to see M and A versions of hierachy in hierarchy maintenance.
but when i mannually try to activate hierarchy i get short dump with message
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Please help.
Regards
SudeepHi sudep,
did u done the attribute change run for hierarchy after loading the hierarchy?.....
try the below steps
1) Load Hierarchy
2) Save Hierarchy
3) Attribute CHange Run on the InfoObject.
Run these in the same sequence and see if it solves the problem.
Make sure that you have this Checkbox on:
1) In Infopackage, in tab Hierarchy Selection, there is a small checkbox for 'Flag for Activation'. Make sure its ON.
2) In Save Hierarchy Process Type, the same check box should be ON.
Harikrishna N -
In Process chain for hierarchy we have a save process, which activates the hierarchy.
This process failed with 0CUST_SALES table locked, so couldnt activate the respective hierarchy.
When from RSA1 activated the hierarchy manually showing modified on list, it gets done.
Can any one help on whyit fails while activating automatically through chainHi,
The reason may be the object 0CUST_SALES related to that save hierarchy process got locked at that time it is running in process chain.and the lock was released at the time u manually executed it that's why it allowed you to actiavte it manually.
Before repeating that process you can check in SM12 whether lock has been released or not and then u can proceed by giving repeat on that particular event in process chain.
Hope u understand.please assign required things if it is helpful.
Regards,
nani
Edited by: Nani on Oct 28, 2010 11:45 AM -
Count difference when hierarchy is active/ hierarchy is inactive
We have hierarchy activated on 'first contact date'. We have the KPI 'Number of Complaints'. and we have char infobject 'Transaction Number' (complaints id). For all 'Transaction Number' we do not have the 'First contact date'.
We have in the initial layout 'First contact Date' and 'Number of Complaints' when hierarchy is activated for 'first contact date' we have 'Number of Complaints' as 8 when hierarchy is inactive we have 'Number of Complaints' as 5. The difference 3 is because these 3 transactions have 'first contact date' as blank. Our requirement is to have the count to be same as 8 with hierarchy activation and hierarchy inactive. Can u suggest how to go about this.Any ideas on this????
-
Hierarchy not getting displayed
Hi,
I have changed the hierarchy by manual update i.e i have added a node to the hierarchy .
And after that i have saved and activated the hierarchy .
It was giving an error saying "Number of nodes in the node is more than the hiearchy ".
The solution was given to "Supress the Inassigned Nodes".
Now , i have did the same .But , still the values are not appearing when i am displaying in the reports.
I.e i am selecting in the input screen where i have created a hierarchy variable.
But , when i want to select the hierarchy in the report by F4 , i am not able to see the node which i newly inserted.Though , i am seeing in the rsa1 .
Please help me with this.
Regards,
Balaji RajWe got the sloution for this:
We need to make the hierarchy setting and tick the check entry box in top down planning layout. Then this is automatically taken care of.
Regards
Sirisha. -
BW Hierarchy not coming up in my WEBI report
Hi Gurus,
I have created BW query with only 2 fields 1) 0PROJECT 2) 0WBS Element and a key fig 'No of records'. I activated the hierarchy on 0WBS. Then created universe on this query. WBS hier has 6 levels so i in universe, I got 6 dimensions with L00, L01...L06 and created my Webi report with following fields.
1) Project (dimension)
2) WBS L00 Dimension
3) WBS L01 Dimension
4) WBS L02 Dimension
5) WBS L03 Dimension
6) No of records - key fig
If I take only Project field and No of records, I can see no of rec with values. But when i executed the report with all WBS hier dimensions like L00, L01,.... i can see only project column is populated and all WBS L00, L01...etc and No of rec key fig are not populated at all.
I am new to this so am i missing anything here? We just now installed BO XI 3.1 SP3. May be some files are missing in installation?
Regards,
Rahul.>
SAPBW 2006 wrote:
> Hi Gurus,
>
> I have created BW query with only 2 fields 1) 0PROJECT 2) 0WBS Element and a key fig 'No of records'. I activated the hierarchy on 0WBS. Then created universe on this query. WBS hier has 6 levels so i in universe, I got 6 dimensions with L00, L01...L06 and created my Webi report with following fields.
>
> 1) Project (dimension)
> 2) WBS L00 Dimension
> 3) WBS L01 Dimension
> 4) WBS L02 Dimension
> 5) WBS L03 Dimension
>
> 6) No of records - key fig
>
> If I take only Project field and No of records, I can see no of rec with values. But when i executed the report with all WBS hier dimensions like L00, L01,.... i can see only project column is populated and all WBS L00, L01...etc and No of rec key fig are not populated at all.
>
> I am new to this so am i missing anything here? We just now installed BO XI 3.1 SP3. May be some files are missing in installation?
>
> Regards,
> Rahul.
Here there are two ways to get out this (there's no problem with u r installation)
*1) if u are using webintelligence in bo , make sure that drill option(on top) to be enabled,*
*2) in universe, select the key figure (No of records) rightclick * No:ofrecords* -> object properties -> Properties tab Check Function is assigned to sum, if the option Database delegated is there just change that to sum. and apply, save and export the universe and check again
Regards,
Naveen kumar -
Error while loading Hierarchy using Idoc
Hi Experts,
I am loading Hierarchy data from r/3 to Bw,
After load , in the monitoring details tab
its like this
Data Package 1 ( Records ) : Everything OK
Transfer rules ( 911 Records ) : No errors
Hierarchies for master data received. Processing being started.
Transfer 911 data records in communication structure
Update ( 0 new / 0 changed ) : No errors
Data saved successfully
Processing end : No errors
Data successfully transferred to the update
Subseq. processing (messages) : No errors
-> Start update of master data hierarchy
<- End update of master data hierarchy
Hierarchy successfully activated
the hierarchy is adding to the infoobject
But in the reporing it showing like not assigned material
I think the hierarchy is not loaded correctly into the target.
because of the Idoc process , i am Unable to debugg..
plz give me any ideaHi Vijay
Here:
NODENAME tab
EXTERNAL INTERNAL FORMULA
* js:%external%.toString().replace(/\s+/g,"")
* js:%external%.toString().replace("#","_")
* js:%external%.toString().replace(",","_")
A006-#???? *skip
Only the first line will work, you have to perform all replacements in on JS line, like:
js:%external%.toString().replace(/\s+/g,"").replace("#","_").replace(",","_")
* in EXTERNAL means ALL
Vadim -
BI 7.0: Issue with Hierarchy for infoObject OPROD_HIER
Hi Gurus,
I have activated the Hierarchy datasource 0PROD_HIER_LPRH_HIER in ECC, tested with transaction RSA3 (456 node IDs) and replicated to BW.
In BW, the datasource has been assigned to the infosource OPROD_HIER ;
when I have created the infopachage, there is no Hierarchy available to select !!!!!!!!!
Please can you help with any solution : note, .....
Thanks in adavnceHi Mr V
I have clicked on "available Hierarchies from OLTP", but nothing appears above.
I don't understand what is wrong
Please an help is needed .....
Thanks
Edited by: Firmin Kouassi on Jul 26, 2009 9:24 AM -
Hi All,
I need a report output as shown below.
Team Country No of Plans
> 500010 IN 10
> 500011 IN 5
> 500012 IN 5
> 500013 0
activated the hierarchy for the team field. Team field value is from the master data it displays the hieararchy where the user is assigned to. Country is from transaction data.
But i am getting the result output as below.
Team Country No of Plans
> 500010 IN 10
> 500011 IN 5
> 500012 IN 5
> 500013 RESULT 0 (also this field is highlighted)
evnthough i the result rows is suppressed the result value is displayed.
Thanks in AdvanceHi Prince,
A product hierarchy can be structured as follows:
Level Example Description
1 00001 Electrical appliances
2 00002 Household appliances
3 00000003 Wet appliances
In this example, a dishwasher belongs to product hierarchy 000010000200000003.
Please refer the below link for better understanding,
http://help.sap.com/saphelp_46c/helpdata/en/77/1a39516e36d1118b3f0060b03ca329/content.htm
Plz rewards points if useful,
Ganesh. -
Hierarchy node text shows short text instead of medium text in WebI report
Hi,
We have created a simple Hierarchy suing Tx RSH1.
US -> North Carolina
South Carolinakey
Rest of America
Please note "North Carolina" is the medium text for the node while the short text which can contain max of 10 chars is "North Caro"
We have used and activated the hierarchy within the BEx query. Text display with "Medium Text" has been enabled for the InfoObject. The display on the BW report is as expected showing the medium text for all levels and all modes.
When a universe is built on the query and a WebI report is created based on the universe everything works fine other than than the Hierarchy text for different levels and nodes. Instead of showing the Medium text, the short text is getting display.
We took out the text object from the Universe in the Universe designer and went ahead with the key and medium text, but that did not help.
Is this a known bug? Is there a workaround for this issue?
We are on XI 3.1 SP3.
RgdsHi,
I am working on BO XI 3.1 SP2.
I have displayed the medium text for the hierarchy nodes as:
In my universe three detail objects(key, medium name and long name) gets generated for each hierarchy node.
I have copied the definition of L01 Medium name (detail object) in the L01 dimension object. similarly for other hierarchy nodes.
i.e. L02, L03.. etc.
Now the master data which have been loaded for the medium name will be displayed.
Regards,
Rohit
Maybe you are looking for
-
I´m getting mixed up
Hello, my P. Bell computer MultiMedia 350/2 is equipped with a MSI 6147, (i440BX) 1.X board,(MediaStar), Bus 100Mhz, Bios Award 4.51 PG. I want to upgrade its memory, according to the manual it only admits "registered DIMM", on the contrary Pack.Be
-
When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.
-
Additional field in selection screen of a abap query
Hi, I am adding a new additional field in the selection screen through abap query(using transaction SQ02) which is of type VBRK-FKSTO. The value entered can be 'X' or empty space.But the value which is entered in the selection screen is not getting r
-
hi EveryBody... i am unable to connect to the Oracle Database using Enterprise managaer in 10g, when i am writing http://172.20.262.27:1158/em it is throwing The page cannot be displayed output using Oracle 10g Release 2 on Hp-itanium please Help me
-
I am very interested in learning Procedure and i do not know where to start. my first question is when to use procedure over fuction and can someone gives me an example for procedure. thanks