Activation of Inactive DCs

Hi Gurus,
I have created a DC in a track.
After that i Checked In the DC. Due to some reason the Activity disappear from the Activation view.
Now the DC appears in the Inactive DCs but not in the Active Dcs.
Now, How can i activate the DC.
Thanks,
Anumit

Hi Anumit
You can login to CBS Web UI and activate your activity from there.
1. Switch to Activation Requests View.
2. Right click on your request id and select "show in CBS Web UI".
3. Login to WEB UI using your credentials.
4. Select the Activities link in the application, and search for your activity.
5. Click on the Activate button in the same page.
Regards,
VJR.

Similar Messages

  • What is diff b/w active and inactive DCs

    hi
    please let me know what is diff between Active and Inactive DC's.
    If possible send some FAQs on JDI
    Thanks
    -mmukesh

    Hi Mukesh,
    When you are developing somthing through JDI (NWDI), you will have inactive dc and active dc.
    If you want to do some changes in code then you can do these changes through inactive dcs. Whatever changes you do in inactive DCs and until you check-in that activity. other developers cannot have those changes.
    but, when you check-in your activity those changes will be visible to other developers who are working on the same DC but this updated code will not be reflected in active DC.
    But when you activate that activity, those changes will be reflected in active dc and this active dc will be deployed on Development server.
    In summary, inactive DCs contain intermidiate code which is not ready to deploy on Development server yet. This updated code is available in Active DC.
    Hope now you are clear with Inactive and Active DCs.
    Regards,
    Bhavik

  • Difference between Active DCs and Inactive DCs?

    Difference between Active DCs and Inactive DCs?

    Hi Jyothi,
    PFB link for the clear Explanation on the Active and Inactive DC views
    [http://help.sap.com/saphelp_nw70/helpdata/en/2b/e4a43f4aa1330ee10000000a114084/content.htm]
    Regards,
    Govindu

  • HELP: Offline Active/Inactive DCs in NWDS

    Hi,
    How do I make online the Active/Inactive DCs in NWDS? Do I need to install or configure anything?
    I need a corresponding DC for me to change or copy the standard screen for ESS Leave Request.
    Thanks,
    Jolo

    Hi,
    in NWDS the configurations have to be imported i.e. development configuration for ESS/MSS track in the Config , inside the Software component.
    select the DC and create project out of it then you can do the modifications and deploy.
    Import the track in to the NWDI:
    Once the track is created by our administrator then we need to import that track in to the NWDI.After opening the NWDS go to the development configurations perspective.
    Perspective option will be in the top menu follow this
    Window > Open Perspective > Click on others > select Development Configurations.
    Then login in to DTR  and import the configuration. Once you select import the below shown pop will appear, Select remote option from that.
    After selecting the remote in the bottom area all tracks will be listed ,Select Your track which you want to import. Then click on finish button.
    Customization in the standard ESS Leave Request WebDynPro applications.
    Find the corresponding DC of the screen in which you want to make changes.
    May be it will be helpful for you.
    Hope this helps!!
    Thanks & Regards
    Vijay

  • Unable to find DC in Inactive DCs in DTR

    Hi,
    I am able to see all my Development Components in Active DCs of DTR but I am unable to see Development Components in the Inactive DCs of DTR ?
    What I need to do so that I can get the Development Components in Inactive DCs  ?
    Thanks...

    HI,
    May not be the right solution but try out this.
    1. Refresh the node in inactivetab
    2. Close the NWDS and open.
    3. Lastlly try to upgrade configurations
    Also check if you can find under the inactive node in DTR.
    Thanks,
    Gopi

  • Dynamic File Adapter status -  Active or Inactive

    Hi Experts
    Is there any way  to set the Sender/ Receiver File adapter status dynamically to inactive or active.
    Is there any setting exists in the file adapters ? Please provide me possible solutions.
    Thanks
    Faheem

    Hi all,
    Many thnz for the response.
    There is one more way of doing this as well. Just now i found that.
    In the runtime workbench - Communication channel monitoring , Select the automatic control for the comminucation channel to make active or inactive .
    there are options for our comm channel to run specfic date and time.
    Thnz
    Faheem

  • Change status from active to inactive

    Hi Experts,
    How can I change status from active to inactive for the InfoCube?
    Thank you

    You can deactivate a cube by deactivating one of the infoobject in it:
    select one of the char in the cube
    menu option Extras/Unlock infoobjects
    The system will offer you to delete the cube content.
    If you agreed, the cube becomes inactive.
    Please assign if helpful

  • Active and inactive vendor

    Hi Guys
    can any one explain what is active and inactive vendor and how to see the list of vendor master.
    G.Krishnamohan

    in SAP easy access
    under Financial accounting >Accounts payable-> information systems-->masterdata report
    you can display blocked vendors also as a list there using those reports.
    the vendors which are blocked are inactive vendors
    anantha

  • Why am I having less free memory? What is active and inactive memory?

    Hi, I own a MBP penryn model. Right now, when I look in the activity monitor (or istat pro), it tells me that my free ram is 302mb, 56mb inactive, 816mb active, and 166mb wired. Why am I only having 300mb free if Im only using safari at the moment and not running anything else? Everytime I start up my notebook, the free space is around 1.70gb free at least. But why do I have that little bit of free space after a long time use?
    Sorry if this is a newbie question, im really new to this.
    Message was edited by: djvic87

    About OS X Memory Management and Usage
    Reading system memory usage in Activity Monitor
    Memory Management in Mac OS X
    Performance Guidelines- Memory Management in Mac OS X
    A detailed look at memory usage in OS X
    Understanding top output in the Terminal
    The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.

  • How to query in SCCM 2012 to know how many active and inactive clients in a specific time and date

    Dear Everyone,
    Good morning. I need to perform a query to know how many clients PCs are active or inactive during the a specific time and date (let say, today 9pm). In my query, I want to know:
    1. How many client PCs is active at that time and date?
    2. How many client PCs is not inactive at that time and date?
    Any assistance is greatly appreciated. Thanks.

    Thank you Gerry for pointing out that it doesn't show real time date. I do agree with that. However, I am look at the (at least in this) report which supposed to [description] shows a list of computers not reporting any power activity for a specified date
    and time. Since I can only key in date in my selection (time option not given), I am expecting the report to show me whether there any client PCs that doesn't any power activity for the specified date. A list was generated, and a number of them shows HardwareInventoryScan,
    LastHeartBeatScan and LastPolicyRequest on the same date itself. I would like to know why these appears, so that I can learn from it.
    Due to the selection option given, I can't expect my original goal, but at least (hopefully) I can get to know (past event) how many and which client PCs is not powered on a particular date based on the date and collection selected.
    At least by getting explainations, I hope to learn something from this (how to read this report). Thanks in advance.

  • User ststus active or inactive

    HI All
    My project requirement is to find out the user status. Is the user active or inactive.. can anybody provide the technical details for the same. I mean table level..

    Hi,
    Status Profile in SAP CRM plays a very important Role. It's spans across multiple Objects. You can get the status profile information in the following Tables:
    TJ20 - Status Profile.
    TJ30 - User Status.
    Also, you can have a look at the following link for a very detailed information on Status Profile [ Status Management in Business Transactions|http://help.sap.com/saphelp_crm60/helpdata/en/5b/e4f53911cac83ce10000000a114084/frameset.htm]
    Hope this helps.
    Thanks,
    Samantak.

  • I want Queue status weather it is Active or inactive

    HI,
    please any one let me know information about the Issue
    i want Queue status weather it is Active or inactive
    from which file weblogic server will get information
    Reply me as early as Possible
    Regards,
    Srinivas

    U can use the follwoing JMX Code
    http://weblogic-wonders.com/weblogic/2010/01/21/jms-resources-using-jmx/

  • Pls can any one suggest me the Existing Report Name for Active and InActive

    Hi all ,
               pls can any one suggest me the Existing report name for displaying Active and inactive vendors .
    Rgds
    Rafi .

    hi,
    my transaction is VL02N change outbound delivery.

  • Active and inactive states for a button

    Is there a way to assign a button action only when the playbacket is on:
    i.e. lable "play3"on timeline instead of placing a hotspot over each button with code?
    Basically an active and inactive state.
    button1 exists on entire 30 seconds then only active when playbacket hits and stops on "play1", "play2", "play3" etc..

    Hey there-
    Yes, you can do this with a little bit of code.  Take a look at the "state management" section in this blog post, which will describe how to set variables, get variables, and use an if statement to code some logic in.
    http://blogs.adobe.com/edge/2012/07/18/tutorial-leveraging-independent-symbol-timelines/
    Hope this helps,
    -Elaine

  • Active and inactive program

    Hello Gurus,
          I have following three question about active and inactive program:
          (1)  what is the difference for active program and inactive program ?
          (2) I wonder if  there are inactive and active version for all program ?
          (3) I want to editing a program in operation. How can I get that ?
    thanks very much!

    Hi,
    Only activated objects can be accessed by all the users. If the object is under developement only active version is visible to everybody which can be accessed.
    An object may have any number of inactive versions, but it isi invisible to other users. It is confined only to your worklist. once you activate this it will beactivated and will be available for whom so ever it is authorized.
    By activating the object, the system checks the syntax of the entire object, then creates an active version, generates a runtime version, and deletes the corresponding entry from your inactive object list. Only active versions can be transported to other systems.
    <REMOVED BY MODERATOR>
    Thanks,
    Imran.
    Edited by: Alvaro Tejada Galindo on Apr 28, 2008 12:58 PM

Maybe you are looking for

  • IPod 30GB generation 5 Video takes a long time to start up/load

    The iPod i currently own takes a while to load where i can operate it. The last time i used it was a while ago and i gave up on it, now im back at it. It wouldnt play the songs so i tried to restore it after i did that, my itunes would not find it no

  • Safari and PDFs

    Safari will not open pdf files.  I have 8.1.3 and this is still an issue on my phone and tablet.  It will not allow to open Safari files in iBooks either.  Is there a solution?

  • HT204022 Can't remove photos or folders downloded from my computer

    Can't remove photos or folder on my iPhone 5 IOS7: Created (2) separate photo folders and downloaded from my computer (on iPhone the folder label has (downloded from my coputer) next to folder name. These photos were first copied from photostream (on

  • What is Sync's Strategy

    There's this amorphous thing called 'Sync' that synchronises records, say, bookmarks, on different installations of a user's Firefoxes. But what does that mean? What's the detail? Sync emerges as a feature after I've been using Firefoxes on my comput

  • Dynamically displaying rows in jsf

    hi, I have arequirement in jsf like I have to display the rows dynamically when I click on Add New Product and also I have to display the products that are already added to the database. When I click on Add New I should be able to add the new product