Activation of node SAP DB tcode RZ20

Hi!
I would like to set up System Monitoring for the satellite system with SAP DB.
When I access to tcode RZ20 in satellite system I unfortunately cannot see the SAP DB node under:
SAP CCMS Monitor --> Templates --> Database --> SAP DB.
Does some one know how to activate this node in order to monitor them from SOLMAN?
Thank you very much!
regards
Thom

Hello Thom,
You already posted this question in the past at the thread::
Re: Monitor SAP DB
Did you follow the recommended steps from this thread?
Could you give more details of your current problem:
-> What is the database version?
    < SAPDB 7.6 ? Please also give information about <Support Package>.<Patch Level> ,
      please review the SAP note -
            972785     Information: Change to MaxDB version numbering >
    What is the Basis SP of the SOLMAN system?
    < the SAP Basis SP of Solution Manager is 7.00 SP 12. Correct? >
   What is the SAP kernel version of the SOLMAN system?
Do you have the MAXDB & SOLMAN system running on the same server?
< Please go to /nsm49 on the SOLMAN system & run '-s dbm_version' command
     using the dbmcli tool to check the version of the MAXDB client on the appl. Server of the SOLMAN system. See more details in the note "822239 FAQ: MaxDB Interfaces" >
Did you create the connection for the data base instance?
Did you run the Connection tests in /ndb59 without problems?
Or what problems did you get?
Thank you & best regards, Natalia Khlopina

Similar Messages

WebDpro Exc: ICF Service Node "/sap/bc/webdynpro/rpm/ui_dashboard/~ucfLOADI

Error: WebDynpro Exception: ICF Service Node "/sap/bc/webdynpro/rpm/ui_dashboard_initiative/~ucfLOADING" does not Exist (See SAP Note 1109215).
The error occurs when trying to access the initiative dashboard via the portal.
However the all necessary SICF web-dynprou2019s and services are active and working.
Checked ST22 Log and SAP Note referred to in the error message couldnt solve the issue.
Even Restarted the portal but error persists.
This error is across all RPM Portals and affects only the standard RPM (4.5) functionality.
All the custom developments are working fine.
Pls help.

Hello,
i have the same problem.
I publisched my WEB-Dynpro ABAP Application in Portal and if i try start an Aplikation and click to menue i get the same error.
If I try it once more - it works and than once more - error and so on.
If you have a solution I will be very pleased!
Best regards
Vladimir

Activate MTE for all the systems in tcode rz20

Hi!
I face with the following probem in tcode RZ20. If I choose the MTE set and one of the systems, I get
the warning for the MTE class Availability: <SID> on Server
Monitoring inactive Planned downtime
How to activate this MTE class for the system?
Thank you very much!
regards
Thom

Hi,
mark the node, switch on the maintenance-function, go to menue: edit -> nodes MTE -> choose activate.
I hope, this will solve your problem.
Greetings
Christian Wosgien

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

How to create button in application toolbar in sap standard tcode va03

Hi Gurus,
I want to create a button in the application tool bar of a sap standard tcode : va03.
Can some one help me with this..!
Best Regards,
Navin Fernandes.
Edited by: NAVIN FERNANDES on Aug 12, 2010 10:02 AM
Edited by: NAVIN FERNANDES on Aug 12, 2010 10:07 AM

Go to the coresponding PF status and edit using modification assistant.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
Regards,
Nikhil

What are Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina Joshi

Hi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
     -- Hardware Sizing
     -- Preparation of Data Centres
     -- HANA Hardware preparation
     -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
     -- House Keeping activities on BW system (data clean up, etc)
Post Installation:
     -- Sanity checks / Preparation and License checks
     -- JAVA Configurations
     -- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
     -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
               - ZBW_HANA_COCKPIT Tool
               - ZBW_HANA_CHECKLIST Tool
               - ZBW_ABAP_ANALYZER Tool
               - ZBW_TRANSFORM_FINDER Tool
               - SIZING Report
               - System Clean up Activities
               - Impact of 7.4 on source system checks
               - Java Upgrade for portal
# DMO Stages
               - Preparation & Pre Migration checks
               - Execution / Migration
               - Post Migration Activities
# Testing Phase
               - Source system checks/Activities
               - System and Integration Testing
               - End to End Testing
               - Performance testing
               - Reports
               - BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren

Clipboard activity coming from SAP ERP in an interaction record

Hi, do you know if it's possible to have activity created in SAP ERP to be linked to an interaction record in CRM? As an exemple; A customer call, interaction record is started, the rep modify something for that customer in SAP ERP (IS-U). Is it possible to see in the clipboard for that interaction record the object that was modified in the ERP? Thanks

Sijo thank you so much for your reply. I guess thats the way we are heading towards as we found there's nothing you can do from the config. Now we are trying our luck through customer development.
Thank you so much for your reply.
Cheers
Jack

Activity Creation in SAP from MSP ( Micro Soft Project )

Dear All,
Regarding activity cretaion in SAP from MSP, I have one query....
I know that we can definitely create internal activities from MSP , but there is a requirement to create extrenal / service activities. So just want to know whether external / service activity can be created from MSP or not.
Please share your views...
Regards,
Ashok Sangal

Hi,
Yes it is possible.
Under settings of OPENPS use more control keys as defined in IMG contomizing.
The control key determines whether the activity is processed internally or externally.
Regards,
Harsh.

Service activity creation in SAP from MSP (Microsoft Project)

Dear All,
As we are planning to integrate SAP & MSP, I have one query regarding service activity creation in SAP from MSP.
In case of service activity in SAP we have to assign respective services also otherwise it does not get saved.So when we transfer service activity from MSP (after maintaining the respective control key in MSP ) how we will manage with all services because we can not define these service in MSP.
Apart from that we have some procurement parameters also like material group, purchasing org, price, outline agreement....we have nothing in MSP for these...so how we will manage with this.....
Please just share your valuable input to deal with this....Thanks..
Regards
Ashok Sangal

Hi Harsh
Thanks for your quick reply......
I agree with you that by flexible field mapping we can do but my concern is that service activity should have services also defined in MSP because when this will come to SAP , it will ask for services & if services are not available then this will fail.
Please suggest your opinion ..
Regards,
Ashok Sangal

How to install oracle EM 11.2.0 at the VCS active passive node ?

Dear all Gurus
Anyone can help me for the installation of the Oracle EM 11.2.0 on the Veritas cluster storage with the active & passive node. we have 2 host name pscsdbhost1 & pscsdbhost2. I did try to install using :
emca -config dbcontrol db -repos create
at the node 1 - pscsdbhost1, after installation completed, i was able to bring up the EM, run perfectly and no issue at all, then when i fail over to the 2nd server and install at the 2nd server pscsdbhost2 using same command :
emca -config dbcontrol db -repos create
I was able to bring up also and run perfectly, however after this,
everytime i failed over to any of the server's both doesnt work anymore.
Anyone can advice me how to setup on this situation ?
Please help,
Thanks
Regards
Surya

why you install it when EM are installed when you install database?
did you try to recreate it?
emca -deconfig dbcontrol db -repos drop
DROP USER sysman CASCADE;
DROP PUBLIC SYNONYM setemviewusercontext;
DROP ROLE mgmt_user;
DROP PUBLIC SYNONYM mgmt_target_blackouts;
DROP USER mgmt_view;
emca -config dbcontrol db -repos create -cluster
emca -displayConfig dbcontrol -cluster

Creating CRM 7.0 Activity from ISU SAP GUI (CIC0)

Hello Guys!
I need to create CRM 7 Activity from ISU SAP GUI cic0 screen using actiion box. Can any one please help me out what would be the best way calling CRM 7 activity from ISU SAP GUI, with my understanding the CRM 7 would not support sap gui and have to use webclient technology.
My scenario: Creating activity in CRM 7.0 from ISU GUI.
Existing process is creating an activity in CRM 4 from ISU SAP GUI, now business would like to move from CRM 4 to CRM 7. I need to find out or give suggestions to business what would be the best approach or solution to create CRM 7.0 activity from ISU point of as business would not like to use CRM WebClient screen to create activities. I need help on how i can suggest the busines.
Please help me out as i am new to ISU and hope you have understood my requirements.
Thank you in advance
Regards
shankar

Hi ,
Kindly use the Transaction launcher service using the Customization :
SPRO > CRM > UI Framework > Technical Role Definition > Transaction Launcher > Configure Transaction Launcher
SPRO > CRM > Interaction Center WebClient > Basic Functions > Transaction Launcher > Configure Transaction Launcher (Wizard)
Kindly read help documentation next to it for details.
Hope this helps.
Regards,
Anup

Inter Dependent Field Validation in SAP standard TCODEs

Is it possible to build a relationship betwen Screen or Selection Fields. Example Plant and StorageLocation. Default behaviour is SAP shows all possible values even if an interdendent restricting value has been entered - this makes users irritated.
In ABAP it is possible to do Conditional POV on F4 help
- it is tricky you need
'DYNP_VALUES_READ'
'CONVERSION_EXIT_PERI_INPUT'
'DYNP_VALUES_UPDATE'
'F4IF_INT_TABLE_VALUE_REQUEST'
Further Selection screen restrictions can be done by CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
Hand coded ABAP programs can make Users experience rich & easy.
How to do the same to the best extent possible in all SAP standard TCODES. If a screen field or selection or parameter is filled in then any other screen field selections or parameters should only show restricted values - example Plant if filled in, will show only Storage locations of that plant/plants.
I realize that the way SAP keeps RANGE & SELECTION data with both Inclusive/Exclusive SIGN & complext OPTIONs is not conducive to conditional POV as far as Selection screens are conccerned. But what about EnjoySAp screens?
This is genuine user need & I cannot imagine that there is no easy solution!
For example in a Hospital for Diagnostic tests you enter DEPAERTNET (Xray, Pathology etc) and then TEST - then POV of test should TESTs ONLY of relevant department. Having filled in XRAY no user wants to "wade" through "Urine tests"!
Such restrictions & interfield validations also ensure that processing is never wrong. The mistakes users do are often attributed to the weakness in this area & it is not possible or desirable to write BAdIs for all SAP TCODEs.
Regards
-jnc

Hi,
You the go into debug mode and check at which statement the validation is carried out. (Most of the time it is done by checking the sy-subrc value ). Now put a session breakpoint at this statement. After this every time when the transaction is executed, you can change the value of the variable that is tested and bypass the validation.
But if you are in production system, you wont be authorized to go into debug mode.
Regards,
Bhavesh.

Please update me migration activity plan in sap mm point of view

Hi,
In our company, we have two company codes have two plants each one, Now management decided to these two plants in to one company code existing, please update me migration *** Merger activity plan in sap mm point of view?
Padma
Edited by: padmap on Apr 14, 2010 7:08 AM

I guess it can be done. You need to cut all links of plant to the existing company code in ENTERPRISE STRUCTURE, and then reassign the said plant to the other company code.
Edited by: Afshad Irani on Apr 14, 2010 11:23 AM

Add users from several Active Directories in SAP BPC

Hello everybody,
Does anybody know if you can add users from several Active Directories in SAP BPC??
In affirmative case, how can you add several Active Directories in SAP BPC??
Thank you very much.
Best regards,
Fernando

Hi,
We almost have same issue to add users from several Active Directories.
BPC server is in Domain A. We perform to add users from Domain B. Our trusted relation between AD is Domain B approve Domain A (unidirectional).
We cannot get one user which is able to browse both AD. So we install BPC with a user which has rights to browse Domain A and we use another user in COM+ component (OsoftUSerManage) which has right to browse Domain B.
But it is not working : we encounter an issue (access denied) in web administration by adding users from Domain B.
Any idea ?
Env. : BPC 5.1 SP6

Need node in rsa5 tcode in bw-urgent

hello
I am very new to bw.In Bw i am running RSA5 Transaction. In that only Root ,PIbasic, Bw And Nodesnot connected nodes are available . But I need SD node. How can i get. i search in menu only. Is there any process to get SD Node.
help me out.
Thanks in advance.

Thanks mario & anil.
But sankar thanks for ur answer . I think ur working in BW. plz do a favour for me.
First i would like to say thanks . I got that tcode & node in Sap-r/3.
Here i have to prepare 2 reports in BW
1 )sales order detail report.
2 )sales weekly deliveries report.
They provided me 1 document (10 pages)everything is there
But i struct in ...
Assign datasource to the infosource.How to do that.
If ur free right now I will send the docu. Give me ur mail-id.
Thanks in advance.

Activation of node SAP DB tcode RZ20

Similar Messages

Maybe you are looking for