Activation of Preinstalled windows 8.1

Hi,I just bought HP Notebook with Preinstalled Windows 8.1 (64 -bits) but windows not activated. The option to activate Windows keeps poping up whenever I turn  on the Notebook, pleases how do I go about activating the Windows. N/B: the Note book came sealed with no CD for activation. Sincerely, John.

Hi John, You could try the following, however if it doesn't resolve the activation issue, my best advice would be to return the notebook to the retailer and get it replaced as Windows should show as activated after the initial set-up. Hold down the ctrl and alt keys and press delete. Select Task Manager. In the bottom left select More Details ( if it's not already selected ). Click in the Name column header to arrange the processes in alphabetical order. Find the process Windows Explorer, then right click on it and select Restart. When the process has restarted, close Task Manager, then right click the Start Menu icon, select Command Prompt (Admin) and click ‘Yes’ to the uac prompt. Enter the following command and hit enter ( Note that there is a space between slmgr and -rearm ) slmgr -rearm Restart the notebook. Regards, DP-K

Similar Messages

  • Get product key for preinstalled windows 7

    Hello sir, I bought this laptop (Hp pavilion dv6 6115tx Entertainment Notebook)around 4 years ago with preinstalled Windows 7 Home Premium Operating system.  As you know Microsoft is going to give free upgrade to Windows 10. But the problem is that the product key below my laptop is not much visible. I am unable to identify the product key.  Is there any other way to get product key of my genuine windows 7? I have recovery disk with me. but it does'nt  have product key on it.Please help me... Thanks & Regards,Rushikesh Musale

    Yes, you can use the same product key for 64-bit release too, as SenneVL says. But, kindly note that upgrade across is not supported and you need to perform clean install only. Also, kindly note that the Windows installation must be made in the same PC,
    even if different architecture is being used. Otherwise, activation issues will arise.
    Multiple architecture is supported in multiboot, so Windows 32-bit and 64-bit can be installed as multiboot environment, parallely.
    Balaji Kundalam

  • Replacing preinstalled Windows with "normal" and clean Windows installation (T500)

    Hello,
    is there any way, how to replace preinstalled Windows with my super-clean installation of Windows? I'm really not happy with partitioning (honestly, I'm using Linux, so I want just Win partition, Boot partition, Extended partition (with root, home, swap) --- no recovery partition, no foobar partition, which just make no sense for me), given features which I don't need etc. I would rather have clean setup of Windows 7 and have computer installed my way. Also I don't like such toolbar things, and crappy ware of Lenovo already installed.
    I can backup Windows 7 activation and restore it to new clean installation - so I don't need to buy new disc... But - where can I get that clean Windows 7 Ultimate shiny disc? Do anyone know? Is it possible to download it from MS site?

    The preloaded Windows 7 will probably run faster than a retail version due to the EE optimized drivers. Just uninstall Norton, the Office 2010 Starter trial, the additional media software, and you should be good to go.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Office 2013 pro plus activation fail on windows 8

    hi guys
    I have issue about getting Office 2013 pro plus activation fail on windows 8 via KMS server.
    When I test using KMS server via nslookup -type=srv _vlmcs._tcp all looks good with corporate KMS server.
    Activation fine with windows 7 environment
    Any idea
    This topic first appeared in the Spiceworks Community

    Hi
    We recommend you download it from the website and extract it again to make sure your source install is complete.
    Run setup.exe as administrator then try the install.
    If the issue persists, refer to the article on General troubleshooting for installing Office 2013 and Office 365:
    http://support.microsoft.com/kb/2822317
    Regards
    Tylor Wang
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to get preinstalled windows 8 x64 oem?

    Hey there. I have a laptop hp 17-e019dx. It was preinstalled windows 8 x64 oem. Later I installed ubuntu and delete all data on the hard disk.
    I now want to install  windows 8 x64 oem. But I do not have windows 8 x64 oem.
    How to obtain a preinstalled windows 8 x64 oem?

    erico wrote:
    If not, you can purchase a usb recovery flashdrive from HP. The cost is minimal.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en&product=6627485
    If you use this option, then how can I get in Belarus (Gomel) if the input fields for zip code contains 5 characters, and for Belarus Gomel (246000) zip code contains 6 characters?
    https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?softwareitem=729076-001&cc=us&dlc=en&lc=en&os=4132&pr...
    I understand this service extends to the USA and Canada?

  • New e540 laptop and need help preinstalled windows

    I recently bought an E540 laptop and my question is how can I get it to run Windows 8? The box says it comes with preinstalled Windows 7 and 8 but not sure if I accidently pressed something on first boot up that caused it to start Windows 7. Is there any way to run Windows 8 instead? I do not mind reinstalling everything.
    Thanks in advance. 

    Hello and welcome,
    Is it Windows 7 Professional?  I wonder if it was specified as "Windows 7 Professional 64 preinstalled through downgrade rights in Windows 8.1 Pro 64".  I haven't seen a machine with both 7 and 8 preinstalled.  (that doesn't prove much...)
    If it is as I suspect, the machine is licensed for Windows 8 (the key is stored in the BIOS) and has Windows 7 installed.  It used to be that some machines in that configuration had a set of Windows 8 DVDs in the box, but that doesn't seem to be the case any more.
    You can contact support for a set of Win 8 media (there may be a charge for that) or you can try a clean install with downloaded media:  http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • No "activity" in Safari windows

    Hi,
    I've been reading on how to download video's form youtube with my macbook using safari like I did with realplayer in Windows. All over the web, I'm reading about using the activity function in window when playing a video. I don't seem to have it.
    Does anyone have any suggestions. I've pasted the options open to me here;

    I have not tested these myself, but give them a try:
    There is the Free  iTube Grabber which can capture almost any audio and/or video stream (it says here) but only works with Intel Macs.
    http://itube-grabber.en.softonic.com/mac
    Firefox Download Helper is also supposed to work, you have to be logged into YouTube first.
    There is also iTubeX which allows you to download videos (Flash, HTML5 and others), .mp3 and .swf files from almost every website as easily as possible:
    http://www.macupdate.com/info.php/id/27604/itubex

  • Urgent: Configuring LDAP or Active Directory on Windows XP

    I tried authenticating user against infromation stored in Database tables dont know whats the problem its not working, I followed all the required steps for that but not succeed. So I decided to validate the user against LDAP or Active directory. Can anyone tell me how to configure LDAP or Active Directory in Windows XP.
    Please help me out as only one day remained for to submit my project, everything is done except the login page.
    And I dont think I may get even grade C if there is no security for the application. Please help me out in configuring Active Directory or LDAP and ASAP please.

    Yea I agree with you the custom table is easiest way then AD but I was working on the problem from almost a week now and I don't have much time to sort out things with that anymore.
    Help me in configuring AD on Windows XP Professional with SP2, as I'm running out of time.
    the below link is the detailed steps I followed for Custom Authentication:
    Urgent: Custom Database Authentication
    Please help me out for Configuring AD.

  • Step by step process to create domain name and active directory in windows 7 64 bit

    Step by step process to create domain and active directory in windows 7 64 bit
    I work in an organization
    I want to create a domain name SBBYDP and make it server for other computers
    I want that, all users’ have a personal account while they use any computer from this organization, even they use any computer from this network they use their own account to login to network.
    And this may be in Active directory option.
    I installed windows 7 professional edition 64 bit
    Can any person help me? Step by step process, I always thanks full all of you

    Hi,
    You must use the Windows Server platform system for the AD service, you can refer the following KB first:
    Active Directory
    http://technet.microsoft.com/en-us/library/bb742424.aspx
    AD DS Deployment Guide
    http://technet.microsoft.com/zh-cn/library/cc753963(v=ws.10).aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Active X for Windows 7

    I have been trying to install Active X on my computer but I can't seem to find the place to download this on my computer. I open up the Control Panel on my computer, and I open the Flash Player folder, and open the advanced tab and it tells me that  the Flash  Plug in Version is; 11.9.900.170 and the Active X Version is not installed. I wish I could either figure it out or have someone please help me out.
                                                                                             Ernie Sharron

    I though I ASKED? I got a A+ Certified Tech. to install ActiveX for me.
    E.S.
    Date: Sat, 21 Dec 2013 22:09:13 -0800
    From: [email protected]
    To: [email protected]
    Subject: Active X for Windows 7
        Re: Active X for Windows 7
        created by Sean_Wilson in Adobe Shockwave Player - View the full discussion
    Ask on a forum for the Flash Player
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5950877#5950877
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5950877#5950877
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5950877#5950877. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe Shockwave Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Dual Boot Windows 7 with preinstalled Windows 8 on GPT-formatted hard disk and UEFI BIOS.

    Question for Jordon Wees,
    Hi,
    You wrote: I can successfully install both operating
    systems in UEFI mode, with Windows 7 on the first partition and Windows 8 on
    the second partition. <o:p></o:p>
    But I couldn´t!<o:p></o:p>
    Could you please provide me how to install Windows 7
    64 bit on a PC that already has Windows 8 64 bit preinstalled?<o:p></o:p>
    I have also a GPT-formatted hard disk with UEFI BIOS
    but I get the error message that windows can´t install Windows 7 on the disk
    because it is a GPT-formatted hard disk.<o:p></o:p>
    I don´t understand this because it is a GPT-formatted
    hard disk with Windows 8 on it!<o:p></o:p>
    I can´t change the hard disk to MBR format because I
    will lose Widows 8 and all other partitions.<o:p></o:p>
    In the BIOS for the storage dives Boot´ option I
    selected the: only UEFI, I could also select the option ´first UEFI´ but it doesn´t
    change the failure of installing Windows 7.<o:p></o:p>
    Thanks, Sia

    If I am reading your issue correctly. Windows 8 came pre-installed on a computer with a hard disk setup as a GPT with UEFI configured.
    If this is the case then the outcome you are experiencing is correct.
    Windows 7 does not inherently have the ability to install into a GPT disk from the base installation. 
    The Windows 7 DVD is designed to install using BIOS mode.
    Also note that Windows 7 x86 does not support UEFI mode.
    These two articles below may help you.
    http://technet.microsoft.com/en-us/library/dd744321(WS.10).aspx
    http://blogs.technet.com/b/askcore/archive/2011/05/31/installing-windows-7-on-uefi-based-computer.aspx
    Thanks
    Sean
    MCTS: Windows 7
    MCITP: Windows 7 Enterprise Administration
    MCSA: Windows 7

  • ThinkVantage Active Protection for Windows XP, Vista, and 7 missing from driver matrix

    Recently, while checking the Software link: http://support.lenovo.com/ca/en/documents/ht037696
    I noticed:
    Active Protection System
    Like an airbag's sensor, it can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data from some crashes that could occur due to everyday notebook accidents.
    Windows 8 (32-bit), 7 (32-bit), Vista (32-bit), XP, 2000
    12 Mar 2014
    v1.79.0.3
    Windows 8 (64-bit), 7 (64-bit), Vista (64-bit)
    09 Mar 2014
    v1.79.0.3
    If you try to follow the links to the ThinkVantage Active Protection System, you are presented with a document labeled: ThinkVantage Active Protection System for Windows 8 (32-bit) - Laptop or a document labeled: ThinkVantage Active Protection System for Windows 8.1 (64-bit) – Notebook
    No reference to Windows XP, VISTA or Windows 7 in the current version of the documents, yet the text file pointed to by the download links states that this driver still supports all the older ThinkPads and is applicable to Windows 7 and VISTA. The text file does say that Windows XP support has been withdrawn with this release, and that XP users should use the previous version. It does not, however, provide a link to any document or mechanism where an XP user can obtain the previous driver.
    So, is the document correct, or is the text file correct?
    Where is the current driver for VISTA and Windows 7?
    When I went to the support sites to see the supporting documents there, I discovered that the ThinkVantage Active Protection entries were gone from the R61, R500 and T500 driver matrices. The only reference I could find to the ThinkVantage Active Protection System was in the above mentioned SOFTWARE link.
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

    Still no change to the driver matrices.  ThinkVantage Active Protection is still missing. There has been a change in the web site, as follows:
    Active Protection System
    Like an airbag's sensor, it can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data from some crashes that could occur due to everyday notebook accidents.
    Windows 8.1 (32-bit)
    27 Jan 2015
    v1.80.3.0
    Windows 8.1 (64-bit)
    27 Jan 2015
    v1.80.3.0
    Windows 8 (32-bit)
    27 Jan 2015
    v1.80.3.0
    Windows 8 (64-bit)
    27 Jan 2015
    v1.80.3.0
    Windows 7 (32-bit)
    27 Jan 2015
    v1.80.3.0
    Windows 7 (64-bit)
    27 Jan 2015
    v1.80.3.0
    Windows Vista (32-bit)
    27 Jan 2015
    v1.80.3.0
    Windows Vista (64-bit)
    27 Jan 2015
    v1.80.3.0
    So now there are numerous separate entries, but none of them claim to support any 'legacy' machines. Most of the above entries point to the same driver (at present).  The puzzling aspect to all this is that if you read the text documents that accompany most of the above driver packages, you will note that the text document claims that the driver supports quite a number of legacy machines. That information just never made it to the web page.
    So do I manually update a driver because the text document says it is applicable to my legacy R500, or 'believe' the web page which states that only some current models are supported, but not the R500, T500 or R61.   
    Very inconsistant and highly unprofessional.
    ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
    ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
    ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
    ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

  • Terminator - Prompt if a process is active before closing window

    HI. As the title says: I want to get a prompt in Terminator (a terminal emulator) if I accidentally try to close its window while a process is active inside it. Eg.: If I have vim open inside terminator, and I carelessly press the window manager's close button, I want a prompt asking for confirmation.
    Now there was a sane default by which it automatically showed such a prompt, but I (quite stupidly) told it to never prompt me again. Later I wanted it back. But I couldn't find where or how I could change that preference. I have tried going through its "Preferences" gui and also searched its default config file:
    ~/.config/terminator/config
    but I have had no luck. I have also checked DConf Editor by searching for 'term', 'terminal' and 'terminator'. Again no luck.
    I was hoping someone here could tell me how I could fix it. Currently I have resorted to running a screen session, so that I don't lose my work. But I hope I can get that prompt back.
    Thank you.
    Last edited by richcocoa (2013-10-14 08:29:31)

    It's possible to obtain this prompt when trying to close multiple tabs / terminals / windows. I've made some modifications to my /usr/share/terminator/terminatorlib/container.py based on the Launchpad version. The construct_confirm_close function makes it possible:
    def construct_confirm_close(self, window, reqtype):
    """Create a confirmation dialog for closing things"""
    # skip this dialog if applicable
    if self.config['suppress_multiple_term_dialog']:
    return gtk.RESPONSE_ACCEPT
    dialog = gtk.Dialog(_('Close?'), window, gtk.DIALOG_MODAL)
    dialog.set_has_separator(False)
    dialog.set_resizable(False)
    dialog.add_button(gtk.STOCK_CANCEL, gtk.RESPONSE_REJECT)
    c_all = dialog.add_button(gtk.STOCK_CLOSE, gtk.RESPONSE_ACCEPT)
    c_all.get_children()[0].get_children()[0].get_children()[1].set_label(
    _('Close _Terminals'))
    primary = gtk.Label(_('<big><b>Close multiple terminals?</b></big>'))
    primary.set_use_markup(True)
    primary.set_alignment(0, 0.5)
    secondary = gtk.Label(_('This %s has several terminals open. Closing \
    the %s will also close all terminals within it.') % (reqtype, reqtype))
    secondary.set_line_wrap(True)
    labels = gtk.VBox()
    labels.pack_start(primary, False, False, 6)
    labels.pack_start(secondary, False, False, 6)
    image = gtk.image_new_from_stock(gtk.STOCK_DIALOG_WARNING,
    gtk.ICON_SIZE_DIALOG)
    image.set_alignment(0.5, 0)
    box = gtk.HBox()
    box.pack_start(image, False, False, 6)
    box.pack_start(labels, False, False, 6)
    dialog.vbox.pack_start(box, False, False, 12)
    checkbox = gtk.CheckButton(_("Do not show this message next time"))
    dialog.vbox.pack_end(checkbox)
    dialog.show_all()
    result = dialog.run()
    # set configuration
    self.config.base.reload()
    self.config['suppress_multiple_term_dialog'] = checkbox.get_active()
    self.config.save()
    dialog.destroy()
    return(result)
    Paired with suppress_multiple_term_dialog in your ~/.config/terminator/config:
    [global_config]
    suppress_multiple_term_dialog = False
    Most I could find at this time in the morning.

  • Problems with Active Directory and Windows 2003

    Hello,
    I'm using Mac OS X Server 10.4.9 with Active Directory bound to a Windows 2003 Active Directory Domain. I can bind successfully to the domain using the graphical interface. Then in Samba I can access shared directories using Windows users. However, after some time somehow there are problems and Windows users aren't authenticated anymore on the Mac. I've looked at the firewall and there are no denied packets from the Mac. There are two servers in the domain, all clocks are synchronized and domain information is up to date. When I unbind the Mac, I can see the machine account being deleted on both domain servers and created too on both machines when I bind to the domain.
    Problems occur when I try login in using ssh or samba do I think this is a problem with the AD module.
    I turned on debugging messages on DirectoryServices:
    sudo killall -USR1 DirectoryService
    When in Windows, using the Administrator user I try:
    net use \\10.0.0.1 /user:domain\Administrator
    Where 10.0.0.1 is the Mac.
    In the Mac I get from
    tail -f /Library/Logs/DirectoryService/DirectoryService.debug.log |grep ADPlug
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
    2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
    2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
    2007-06-27 10:48:38 CDT - ADPlugin: Calling OpenDirNode
    2007-06-27 10:48:38 CDT - ADPlugin: Opening Specific Node domain.com.mx
    2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Calling GetRecordList Routine
    2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:38 CDT - ADPlugin: Calling CloseDirNode
    2007-06-27 10:48:42 CDT - ADPlugin: Calling OpenDirNode
    2007-06-27 10:48:43 CDT - ADPlugin: Opening Specific Node domain.com.mx
    2007-06-27 10:48:43 CDT - ADPlugin: Calling GetRecordList
    2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Calling GetRecordList Routine
    2007-06-27 10:48:43 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-06-27 10:48:43 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-06-27 10:48:43 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-06-27 10:48:43 CDT - ADPlugin: Returning 0 Results
    2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Put 0 records in Buffer for RecordList
    2007-06-27 10:48:43 CDT - ADPlugin: Calling CloseDirNode
    I really don't know what to do. The Windows Event log shows no messages. The link used to work and there have been no changes in the domain servers.
    The key line seems to be:
    2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    But I don't know what that ADSEngine.mm is.
    XServe G5   Mac OS X (10.4.9)  

    Hello.
    Thanks for your reply.
    I tried the net use with a drive letter with and without the /user switch. When I use a domain user domain\user1 I can't connect. When I use a user local to the XServe it works.
    When I use
    net use x: \\10.0.0.1\share /user:domain\user1
    I get prompted for a password, but it doesn't work.
    I checked the firewall and all packets to or from the mac are accepted, no denied or dropped packages.
    I already went through the MS document on fw ports. Before I opened to Kerberos ports the binding failed. No the binding work OK.
    Some users who were authenticated yesterday still can access files using the Windows domain accounts. It's new users trying to connect those who have problems.
    This is what the Samba log.smbd log shows:
    [2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
    setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
    [2007/07/04 14:58:46, 0] /SourceCache/samba/samba-100.7/samba/source/auth/authutil.c:make_server_infoinfo3(1138)
    makeserver_infoinfo3: pdbinitsam failed!
    [2007/07/04 14:58:46, 0] pdbods.c:odssamgetsampwnam(2329)
    odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'user1'!
    [2007/07/04 14:58:46, 2] /SourceCache/samba/samba-100.7/samba/source/auth/auth.c:checkntlmpassword(367)
    checkntlmpassword: Authentication for user [user1] -> [user1] FAILED with error NTSTATUS_NO_SUCHUSER
    This is what the DS log shows:
    2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Calling GetRecordList Routine
    2007-07-04 14:58:46 CDT - ADPlugin: Search Records called in ADSWrapper
    2007-07-04 14:58:46 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
    2007-07-04 14:58:46 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=user1)(sAMAccountName=user1)(displayName=user1)( mail=user1)(userPrincipalName=user1)(userPrincipalName=user1@*)))
    2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
    2007-07-04 14:58:46 CDT - ADPlugin: Returning 0 Results
    2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Put 0 records in Buffer for RecordList
    XServe G5   Mac OS X (10.4.9)  

  • Adobe Activation Issue on Windows 7

    I am trying to run Adobe Photoshop CS2 on Windows 7.  I ran the install .exe file in compatibility mode and run the photoshop.exe file in compatibility mode as well.  After the installation is complete, I can open Imageready with no issue, but cannot use any of the features since CS2 is not activated.  When I try to open Photoshop I receive the following error:
    Adobe Activation
    Sorry, a serious error has been detected.  To continue using Adobe Photoshop, please reinstall the application. 
    I have gone as far as uninstalling all of my Adobe products and removing the user preferences and then installing CS2 first, to no avail.  I would like to activate my product but the window to allow me will never open. 
    Thank you in advance for your help!

    tait0007 wrote:
    I believe I am running with sufficient admin previleges
    Given your wording, I'm not sure you understand that UAC causes you to run applications without privileges, even though your account may be a member of the Administrators group.
    Have you tried running Photoshop "As Administrator"?
    Also, it seems to me Marian Driscoll has been saying that one of the versions of Photoshop - possibly Photoshop CS2 - might need to be installed with a forced short folder name.  Maybe she'll respond on here and confirm that.
    -Noel

Maybe you are looking for