Activation of Samsung 226BW Monitor takes about 15 seconds

Since I have upgraded Mac OS X to Yosemite (10.10) (currently using 10.10.1) my Samsung SyncMaster monitor (226 BW) on Thunderbold takes about 15 seconds for activation. Before I can see a picture on the monitor there is just a rustle with gray and black. I also know a second case where this problem is absolutely the same.
Has anyone an idea how to solve this? I am using the original Apple Thunderbold to DVI adapter. The problem only occurs if I plugin the thunderbold adapter while my MacBook Pro is already running.

Reset all settings
Settings>General>Reset>Reset All Settings

Similar Messages

How to set up a samsung 2433LW monitor as a second monitor?

I have a HP Pavilion Elite HPE running on Windows 7 64bit. I have one monitor attached, a HP 2311x connected using one of the two available DVI ports. When I connect a second monitor, a Samsung 2433LW using the second DVI port, the second monitor is not recognised and has a black no input screen and the original HP monitor loses all shortcut icons and only the desktop background is visible.
Please advise how I can get my second monitor to work.
Thanks.

Does the Samsung 2433LW monitor work by itself on the computer???
It sounds like the Samsung is taking over as the primary display and the HP is becoming the secondary display. Try swapping the DVI cables in the back of the computer and see if that helps. Here is a photo of the back of the original display card in your HP Pavilion Elite HPE-540me Desktop Computer;
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

DVI connection to Samsung 226BW

I have a problem with my new Mac Pro (2,8 Ghz) and a Samsung 226BW: when i try to connect the monitor using the DVI cable that was inside the monitor case, it doesn't work. If i connect the monitor with the VGA cable it works.
What's the problem? Do i have to change the DVI cable?

The Mac Pro (Early 2008) should be able to work fine with the Samsung 226BW monitor, using any standard DVI cable. Any of the optional graphics cards on the Mac Pro will happily drive the 226BW at it's native resolution of 1680x1050 without any trouble (that's the setup I was using on my nVIDIA 8800GT equippped Mac Pro until I recently upgraded to the Samsung 2493HM monitor).
If all you are getting is a blank screen then check the input selection menu on the monitor (set Auto Source to Manual then use the Source button to cycle through the inputs, remembering to pause on each one for a few seconds to see if the picture appears).
It is possible the cable is faulty - you should check both ends of the cable carefully to ensure there are no bent pins. If there are, you can generally bend them back straight with a pair of pliers, but be gentle!
If that doesn't work, try borrowing a DVI cable off a friend to see if that works. Alternatively, use the DVI to D-Sub (VGA) adapter that comes with the Mac Pro to allow you to plug the cable into the VGA port on the monitor to see if that works. I'm guessing you have tested the monitor with another PC or laptop and it's working ok?

I just bought a new samsung 22" monitor and after talking to them found out it needs higher resolution then displayed in my settings,text resolution is bad. do I take back or can this be fixed?

I just bought a new Samsung 22" monitor. The text resolution is really bad. After talking to Samsung, I found that the needed resolution is higher then what my Mini-Mac shows available. Can this be fixed or do I return the monitor?

Let's try again...
my cable goes from the "Thunderball" port on my mini with an adaptor to convert it to the regular cable
You mean the Thunderbolt port.
What Mac mini do you have? Apple menu > About This Mac.
What Samsung monitor do you have?
What cables are you using?
Have you tried holding Option and click the Scaled resolutions button in System prefs > Displays?

Opening files from a Novell-Share takes about ten seconds

Hi there,
first a few information about our environment:
Windows 7 Enterprise SP1 Clients with Novell Client installed in latest version
Windows Server 2008 R2 DCs
Network-shares based on Novell Netware
When accessing files on Novell-Shares for the first time it takes about 10 seconds to open. Reopening it or any other file at this location again is totally fast. Waiting about 15 minutes after closing the file causes the lag again.
We traced our client-side network traffic and saw many Netbios-queries which failed because our WINS-Servers do not know the Netware-Servers. So first it tried it using every WINS-Server (three in our env.) and then on broadcast in the local subnet three
times. It got no answer and timed out.
So the next step I tried was to disable Netbios-over-TCP/IP with the radio buttons in the Network Adapter settings. After a reboot, the problem reoccured, but there were no more Netbios queries in the trace.
After days of searching for a solution I tried to stop the "TCP/IP-Netbios-Helper"-Windows Service on spec. And suddenly every network share access was totally fast. We tried this with other clients, too. Same behavior! We even did not disable
the NetBios-over-TCP/IP setting. Stopping the service was all we needed to do.
Unfortunately disabling the service causes problems. The Windows-Login fails with a message "No Logon servers available". Using the full qualified user name ("[email protected]") works. But then we saw that policies were not applied.
Any ideas, what could cause the lag? Or is it possible to disable this service without any side-effects?
Bye,
Jürgen

Hi,
What is the result if we access files on other network shares？
I found a thread in novell forum and suggestion is checking the provider order and put Netware first, open network and sharing center, change adapter settings, Select Advanced on the menu> Advanced settings, Click on Provide Order Tab and change order.
And have you contact the novel support team? They're more familiar with this product.
http://forums.novell.com/forum.php
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Wlan authentication and DHCP process takes about 120 seconds

I have an SSID implemented to terminate on an anchor controller. Authentication takes place outside of the CAPWAP tunnel and the foreign controller authenticates the users with the AAA server directly. This authentication takes about 90-120 seconds and I do not see any problems as far as configuration is considered. This authentication traffic goes through 2 firewalls.
Any ideas on where the problem could be? I use the same AAA server for other SSID authentication and so the problem is not related to the AAA server.
Meena

My response is meant more to Apple in general and is certainly not aimed at you Lennart ;-) I wouldn't want to shoot the messenger!!!
If this were an unusual or isolated event, then perhaps re-installing the OS might be considered a solution, but until we determine why and how this is happening to so many systems, this is only a workaround that offers no guarantee that we won't end up right back here at any time. I'm sorry, but an OS reinstall to repair a widespread issue with an errant system level process that is making systems practically unusable is only a band-aid and not a final solution! (not that I won't do it myself ;-), but Apple needs to address the issue and not ask us to re-install the OS that caused/experienced the issue in the first place. Address the root cause not a symptom! Even though they make it fairly simple, an OS re-install is not something I accept as a trivial process to be used when one process is acting up.)
Thanks Lennart for at least an immediate answer to make (i hope) both of my MacBooks usable again!

Firefox 4.0 takes about 60 seconds to start even after reinstalling.

Firefox 4.0 takes about 60 seconds to start. I have tried reinstalling with no change. It isn't antivirus software, as I turned that off and it was still slow. I run Vista Ultimate. Internet Explorer loads very quickly.

I wish my Firefox would load in 16 seconds!! It takes 3 to 4 mins to load but closes almost instantly.

Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds. How do you get this to remove noise from the very start of the clip?

Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds. How do you get this to remove noise from the very start of the clip?

insert a 5 second gap in the beginning of the timeline.

TS3274 My original iPad takes about 5 long seconds before responding to my finger tap in the safari window. Like I tap in Safari window, then count 5 seconds before I can begin typing my search words. Is this normal? I really don't remember it taking so l

My original iPad takes about 5 long seconds before responding to my finger tap in the safari window. Like I tap in Safari window, then count 5 seconds before I can begin typing my search words. Is this normal? I really don't remember it taking so long when I bought it, but it has been this way for awhile. I have closed all open apps many times to no avail. I just reset all settings and still 5 seconds. I don't have a lot on my iPad with plenty of free space available. Also, I have to click twice on many things that typically take one click. Like it highlights it with first click, then second click completes the action that normally would be done in one click, like Facebook like button. Like will underline with click one, then will change to like on second click. Do I need to try to restore from my computer?
Thanks for any help!

Ive tried that but when Im logged in I dont have all the permmisions I should have so it just runs the test for my usernames own little virtual world. Ive been using macs for over a decade now and I have never had my computer do anything like this. while sitting in front of my screen I watched the mouse go to some personal files and change the permissions and then covered their tracks by changing the timestamp on the file dates back. I watched it happpen while all internet conections were off. I had my identity stolen, my facebook password changed, my email accounts closed out. and my firmware password changed all within two weeks of the origninal boot date

I upgragraded my Ipad operating system to ios7. Since then, the key pad has become very lathargic. It takes about 15 seconds to response. Can anyone offer a solution.

I upgraded my operating system of the Ipad to ios7. Since then my keypad has become very lathargic. It takes about 10-15 seconds for any alphabet punched on it to appear on the screen. Very frustating. Can anyone offer a solution?

Reset all settings
Settings>General>Reset>Reset All Settings

I can not activate my iphone 3G because the activation server is temporarily unavailable and takes about an hour so I can do?

I can not activate my iphone 3GS because the activation server is temporarily unavailable and takes about an hour so I can do?

Sometimes the activation server is just not available for a short time. Trying again usually corrects this problem. But as Peter Gillespie suggests, if the iPhone you are trying to activate has ever been jailbroken, or the computer you are using to activate the phone has been used to jailbreak an iOS device then you will get the Activation Server not Available message.

TS3274 My ipad 3 takes about 30 seconds to come up.There is an Apple icon on the screen during that time.My friends have Ipads that come on instantly. What gives?

My Ipad 3 takes about 30 seconds for the screen to come on (an Apple icon )is all that is on
for the first 30 seconds or so. However my friend's have Ipad that come on instantly.What gives
with mine?

Are you switching your iPad off completely (i.e. using the 'slide to power off') and are they just putting their's into sleep mode ?

It takes 30 seconds or more for my Mac to be activated with mouse or any key

when my Mac is asleep, it takes 30 seconds or more for it to be activated by mouse or key

Dan ..
I responded to you here > it takes 30 seconds or more for my Mac...: Apple Support Communities
Please do not start duplicate topics. Makes it that much harder to assist you. Thank you!

Sunce i upgraded my MBP Retina, it became slower than before when i shutdown. Now, it take about 25 seconds to go off while before was about 5 or 6 seconds. any suggestion?

Sunce i upgraded my MBP Retina, it became slower than before when i shutdown. Now, it take about 25 seconds to go off while before was about 5 or 6 seconds. any suggestion?

Have a cup of coffee.

IPhone takes about 10 seconds to get recognized by PC

When I plug in my iPhone to my PC for the first time after a system restart, it takes about 7-10 seconds for it to get recognized by the PC. On any subsequent plug-ins, the phone gets recognized, and starts charging and all, almost instantly.
I have tried reinstalling the iPhone driver, but that didn't help. Does anybody know what causes this? I don't have a similar problem with other USB devices, so it's not my PC's hardware's fault.
Thanks.

My girlfriend has the same problem as you - her iPhone is less than a week old, and already the home button is becoming unresponsive. I encourage you as I encourage her to use the button on the top of the phone more until a more permanent solution can be found, unless of course that guy is bugging out too...
We're going to go through the usual reset / restore motions the next chance we have, and maybe even take it to a genius bar this weekend if we have the time. I will let you know if I have any success.

Activation of Samsung 226BW Monitor takes about 15 seconds

Similar Messages

Maybe you are looking for