Activation of SICF services in batch?

Is there a tool that will record service activation in DEV and then could be use to activate the same services in QA and PROD?
Thanks

Hi,
ashutosh pandey wrote:
To activate all services in an instance you can use SE38 -->SIAC_PUBLISH_ALL_INTERNAL program or you can use it as a t-code directly.
That would be a very bad idea security wise. Only strictly needed http services should be activated in a SAP system.
You are taking a big responsability and are asking for trouble if you do it...
Regards,
Olivier

Similar Messages

SICF Services - All active services and audit trail

We have upgraded one of our client environment from 4.7 to ECC 6.0 - Ehp4 and activated SICF services for Portal applications. We are using ESS, MSS, ECM and HR Admin for Portal and during setup we activated several services.
I was wondering if their is any way to find out all activated services and we can audit who activated all services from backend from ERP 6.0.
Thanks,
Miral.

As per SAP "Note 1555208 - ICF services become inactive after upgrade or SP update" we can find the list of active services along with path using the report RS_ICF_SERV_ADMIN_TASKS
SA38 --> RS_ICF_SERV_ADMIN_TASKS --> Export of Active Services into CSV file
Regards
Bhagirath

Services to be activated in SICF

Hi,
While consuming the webservice, I get the following error:
SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
What are all the services to be activated in SICF?
How to view https logs for the requests?
Regards,
Rajkamal
Moderator message: not directly related to ABAP development, please search for available information, e.g. in the Netweaver forums.
Edited by: Thomas Zloch on Apr 14, 2011 2:14 PM

HI Raj,
Please check the port number specified it should be 5xxxx instead of 8xxx .
Also please check the below points:
1. Have you specified your hostname or IP address? Often the server cannot resolve the ip address for the hostname of your PC.
2. Is the path and port in the directory the same as the path and port of your file adapter?
3. Try question 14 (integration engine section)
/people/mark.finnern/blog/2006/01/12/finally-best-of-sdn-2005
4. also question 11 (in the same section)
5. if the avove will not fix it open XI config guide and
have a look at section
"Connecting Business Systems with an Integration Engine to the Central Integration Server"
6. Your error code is 400, so check this link,
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
For http 400 - its a bad request.
'The request could not be understood by the server due to malformed syntax.'
If you have the XI trouble shooting guide see from page 54,and also try:
1.Check that the port really is the ICM HTTP Port (transaction
SMICM) and not the J2EE port
2.If the port is wrong, change the pipeline URL in the SLD in
the business system of the Integration Server
3.Restart the J2EE Engine to reset the SLD buffer of the
Adapter Engine
Source- "XI troubleshooting guide"
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Naveen.

SICF Services to be activated for SRM 7.0

Hi Guys,
I am collecting list of all SICF services to be activated for SRM7.0
1) SAP -->BC -->WebDynpro -->sapsrm --> activate all services
2) SAP -->SAPSRM --> activate all services
3) SAP -->BC -->WebDynpro >SAP> POWL --> Activate services
4) SAP -->BC -->bsp -->sapsrm --> Activate services
Apart from this are there any other services to be activated for SRM 7.0?
Regards,
Ashish Shah

Hi Ashish,
Why dont you use the standard report W3PUBLISHALL for activating alll the SICF at once .. No harm in Publishing all SICF pages in SRM 7.0
Thanks
Iftekhar Alam

Error During Activation of Web services

When I try to create a web services using RFC and try to complete the steps in the wizard. I am getting error message as "Error during Activation of web services". and also when configure service in wizard, im getting only two profiles as "Basic Authorization: SOAP PROFILE" and "Secure SOAP PROFILE". Kindly do the needful.
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Aug 8, 2011 1:33 PM

Olivier, thank you so much
SOAMANAGER does not exist in my system (sp level 8), so node "/sap/bc/soap/rfc" should be active. Actually, it is active.
I think the problem is related to user rights/profiles.
I have tried to create another WS after assigning role SAP_BC_WEBSERVICE_ADMIN. The same error when trying to activate it, but now, I can see this WS in SE80 (under "Enterprise Services->Service Definition"). It is not active there and if I try to activate it, a success message appears indicating that user "is not authorized to use function netzwerkadministration". I cannot see any new services in SICF...
Probably the new entry in SICF will be created after activating WS in SE80...
Do u know what user profile should I add in order to properly activate the WS in SE80?
Thank you very much!
Vicente

SICF Service not available in Production

Hi Experts,
I have created a Webdynpro application and I have moved it to quality and Production systems respectivelly.
In development and quality system it is working fine, but the same application in production gives a runtime error. It is showing SICF service is not available.
I have checked in SICF Tcode, but the service for the particular Webdynpro application is not available.
How can I resolve this issue.
Thanks,
Pradeep

Dear
you have to activate
/default_host/sap/public/bc/ur
/default_host/sap/public/bc/icons
/default_host/sap/public/bc/icons_rtl
/default_host/sap/public/bc/webicons
/default_host/sap/public/bc/pictograms
/default_host/sap/public/bc/webdynpro/* (ssr, mimes, etc.)
/default_host/sap/public/myssocntl
Active Services in SICF - Developing, Configuring, and Adapting Applications - SAP Library
Regards

Required SICF services in EBP

Hello experts,
I would like to know which SICF services are required in EBP. For security reasons, we can't activate entire trees, and I couldn't find any documentation on this (I only found it for SUS).
We are using SRM 5.0 (with SRM Server 5.5), using Plan-Driven Procurement with Plant Maintenance scenario (including SRM-MDM catalog and attachments)
Thanks for your valuable information.
Regards,
Gilberto Gallardo

Hi
Please go through the links for more details ->
Re: Activating a Service in SICF
why can I not find Service BBPGLOBAL in TA SICF?
SICF configuration
Re: URL for installed Integrated ITS WAS 7.0 /SRM 5.0
missing CCm in SICF tcode
Re: Publised Service
Do let me know.
Regards
- Atul

SICF Services

I wonder if it is a good practice to leave all SICF services activated if we are using GRC / any other BSP enabled component ?
If not, what can possibly be the harm of keeping all services on ?
Thanks,

You should also consider that the service tree and nodes are hierarchical and cascade the authentication credentials.
Only activate those you need.
If a solution suggests activating everything then report it to SAP or to secure at sap dot com (security response team for internal security problems).
Cheers,
Julius

Laptop (Running Windows 8.1) no longer able to print and now see message Active Directory Domain Services is not available

Have a very recent Lenovo Ideapad Laptop running Windows 8.1. Connected via USB port to HP LaserJet Pro CM1415 frw Color MFP Printer. Was able to print fine nearly 2 weeks ago, but something recently happened - either a new windows or office 2013 update
or perhaps I blew away a certain file by mistake. I can see the printer installed but cannot print to it from anything (Word, Notepad, IE, Firefox etc.). The one thing to note is that usually when I plug or unplug a USB related device, Windows 8.1 recognizes
this and makes a certain chime noise, but with the printer USB cable it never makes that noise - making me think that it never fully recognizes the printer. Also when I select the printer (from within the control panel) and right click for properties (via
admin rights) It never lets me fully connect to it.
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc. Its really annoying because this printer was working fine nearly 2
weeks ago. Looking for any advice now. Thanks.
-Chris

Hi Chris,
à
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc.
I noticed that you had reinstalled the printer. Just a confirmation, when un-install this printer, please check
if this printer still exist in registry. For more details, please refer to following KB.
Registry entries for printing
If printer entry still exist in registry, please delete that printer entry and re-install this printer again,
then check if this issue still exists. (Please backup registry entries before operating registry. It will help us to avoid unexpected issue.)
àand now see
message Active Directory Domain Services is not available
By the way, would you please let me know where/when get this
Active Directory Domain Services is not available error message? Or provide a screenshot of it?
(Please hide all protected or private information) Please check if all services are running correctly on the computer. Meanwhile, please refer to following article and check if can help you.
Printer
Problem: Active Directory Domain Services is currently unavailable – Why does windows say no printers are installed?
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Active Directory Web Services service terminated unexpectedly

Hi everyone:
I'm having a problem with the Active Directory Web Services service does not start. Attach the event ID:
Log System:
Log Name: System
Source: Service Control Manager
Date: 1/6/2015 6:55:19 PM
Event ID: 7034
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxx.dominio.com
Description:
The Active Directory Web Services service terminated unexpectedly. It has done this 35 time(s).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7034</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-01-06T22:55:19.292471600Z" />
<EventRecordID>32583</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="1388" />
<Channel>System</Channel>
<Computer>xxx.dominio.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Active Directory Web Services</Data>
<Data Name="param2">35</Data>
<Binary>41004400570053000000</Binary>
</EventData>
</Event>
Log Application:
Log Name: Application
Source: .NET Runtime
Date: 1/6/2015 6:55:13 PM
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxx.dominio.com
Description:
Application: Microsoft.ActiveDirectory.WebServices.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ServiceModel.CommunicationObjectFaultedException
Stack:
at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-06T22:55:13.000000000Z" />
<EventRecordID>1661713</EventRecordID>
<Channel>Application</Channel>
<Computer>xxx.dominio.com</Computer>
<Security />
</System>
<EventData>
<Data>Application: Microsoft.ActiveDirectory.WebServices.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ServiceModel.CommunicationObjectFaultedException
Stack:
at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)
</Data>
</EventData>
</Event>
And
Log Name: Application
Source: Application Error
Date: 1/6/2015 6:55:13 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: xxx.dominio.com
Description:
Faulting application name: Microsoft.ActiveDirectory.WebServices.exe, version: 6.2.9200.16579, time stamp: 0x516356a2
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c
Faulting process id: 0x4ac
Faulting application start time: 0x01d02a03d45e2d00
Faulting application path: C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 1273a0f1-95f7-11e4-93f7-3440b59e2092
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-06T22:55:13.000000000Z" />
<EventRecordID>1661714</EventRecordID>
<Channel>Application</Channel>
<Computer>xxx.dominio.com</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft.ActiveDirectory.WebServices.exe</Data>
<Data>6.2.9200.16579</Data>
<Data>516356a2</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.2.9200.16864</Data>
<Data>531d34d8</Data>
<Data>e0434352</Data>
<Data>0000000000047b8c</Data>
<Data>4ac</Data>
<Data>01d02a03d45e2d00</Data>
<Data>C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>1273a0f1-95f7-11e4-93f7-3440b59e2092</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
I was working about this solution but nothing. "http://blogs.microsoft.co.il/yuval14/2012/06/08/how-to-resolve-error-message-the-active-directory-web-services-service-terminated-unexpectedly-event-id-4079-andor-7034/".
I changed the Microsoft.ActiveDirectory.WebServices.exe.config file, add two line " <add key=”DebugLevel” value=”Info” />
<add key=”DebugLogFile” value=”c:windowsdebugadws.log” />", Attach the log
ADWS Log - AppDomain Microsoft.ActiveDirectory.WebServices.exe with ID 1 - 01/06/2015 17:51:37 ((UTC-04:00) Georgetown, La Paz, Manaus, San Juan)
OS Version Microsoft Windows NT 6.2.9200.0 - CLR Version 4.0.30319.18449
ADWS: [1/6/2015 5:51:37 PM] [1] Main: entered
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeBackupPrivilege
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeBackupPrivilege priviledge because it was absent
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeRestorePrivilege
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeRestorePrivilege priviledge because it was absent
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeAssignPrimaryTokenPrivilege
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeAssignPrimaryTokenPrivilege priviledge because it was absent
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeIncreaseQuotaPrivilege
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeIncreaseQuotaPrivilege priviledge because it was absent
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeDebugPrivilege
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeDebugPrivilege priviledge because it was absent
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeTcbPrivilege
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeTcbPrivilege priviledge because it was absent
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: trying to remove priviledge SeShutdownPrivilege
Utils: [1/6/2015 5:51:37 PM] [1] RemovePriviledgeFromProcess: unable to remove SeShutdownPrivilege priviledge because it was absent
Utils: [1/6/2015 5:51:37 PM] [1] RemoveUnnecessaryPriviledges: all present unnecessary priviledges removed successfully
Program: [1/6/2015 5:51:37 PM] [1] Main: Starting Windows service host.
WindowsHostService: [1/6/2015 5:51:37 PM] [1] WindowsHostService constructed
WindowsHostService: [1/6/2015 5:51:37 PM] [4] OnStart: entering.
WindowsHostService: [1/6/2015 5:51:37 PM] [4] OnStart: ServiceStart thread started.
WindowsHostService: [1/6/2015 5:51:37 PM] [6] StartService: entering.
PerfCounters: [1/6/2015 5:51:37 PM] [6] InstallCountersIfNeeded: entered
PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: entered
PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: System\CurrentControlSet\Services\ADWS key is present
PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: System\CurrentControlSet\Services\ADWS\Performance key is present
PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: First Counter value is present
PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersInstalled: perf counters are installed
PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersCurrent: installed perf counter version: 6
PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersCurrent: desired perf counter version: 6
PerfCounters: [1/6/2015 5:51:37 PM] [6] AreCountersCurrent: perf counter category ADWS is current
PerfCounters: [1/6/2015 5:51:37 PM] [6] InstallCountersIfNeeded: counters already installed and current, no work needed
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Create Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Delete Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Get Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Put Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Enumerate Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Pull Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Open Enumeration Contexts' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADGroupMember Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADPrincipalGroupMembership Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'SetPassword Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'ChangePassword Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADPrincipalAuthorizationGroup Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'TranslateName Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADDomainController Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADDomain Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'MoveADOperationMasterRole Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetADForest Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'ChangeOptionalFeature Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'GetVersion Operations Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Number of Directory Instances' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Possible Connections' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Allocated Connections' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Reserved Connections' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Non-reserved Connections In Use' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Reserved Connections In Use' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Open Web Service Sessions' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Active Web Service Sessions' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Web Service Sessions Created Per Second' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action LDAP Cache Maximum Possible Size' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action LDAP Cache Connection Creation Rate' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action LDAP Cache Connection Reuse Rate' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action DS RPC Cache Maximum Possible Size' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action DS RPC Cache Connection Creation Rate' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action DS RPC Cache Connection Reuse Rate' performance counter
AdwsPerfCounter: [1/6/2015 5:51:37 PM] [6] AdwsPerfCounter: constructed 'Custom Action Cache Size' performance counter
PerfCounters: [1/6/2015 5:51:37 PM] [6] Initialize: initializing performance counters
PerfCounters: [1/6/2015 5:51:37 PM] [6] Initialize: all performance counters initialized
ADWSHost: [1/6/2015 5:51:37 PM] [6] ADWSHost constructed
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] ProvisionCertificate: using host name for certificate name
Utils: [1/6/2015 5:51:37 PM] [6] GetComputerDnsName: computer name is xxx.dominio.com
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] ProvisionCertificate: using cert name xxx.dominio.com
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] ProvisionCertificate: loaded certificate
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] AddServiceThrottlingBehavior: MaxConcurrentCalls=32, MaxConcurrentSessions=500
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateServiceHost: including UserName endpoints
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateServiceHost: adding endpoints for Windows/
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateServiceHost: adding endpoints for UserName/
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxReceivedMessageSize=1048576, ReceiveTimeout=00:10:00
ADWSHostFactory: [1/6/2015 5:51:37 PM] [6] CreateAdwsTransportWithMessageCredentialBinding: MaxDepth=10, MaxArrayLength=16384, MaxStringContentLength=32768
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] StartConfigurationLoading: entered
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] StartConfigurationLoading: establishing watcher on C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe.Config
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: entered
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for InitialPoolConnections, using default value 5
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 10 for MaxPoolConnections
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 50 for MaxPercentageReservedConnections
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxReservedIdleTimeout, using default value 00:02:00
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxReservedTimeout, using default value 00:30:00
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 5 for MaxConnectionsPerUser
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxBindLifetime, using default value 00:15:00
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxServerDownRetry, using default value 10
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for SyntaxCacheEntryLifetime, using default value 01:00:00
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 00:30:00 for MaxEnumContextExpiration
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 00:02:00 for OperationTimeout
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 00:02:00 for MaxPullTimeout
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 5 for MaxEnumCtxsPerSession
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 100 for MaxEnumCtxsTotal
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for CertName, using default value NULL
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for MaxGroupOrMemberEntries, using default value 5000
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for CustomActionConnectionCount, using default value 10
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for CustomActionIdleConnectionTimeout, using default value 00:02:00
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: no value specified for InstanceRediscoveryInterval, using default value 00:01:00
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 32 for MaxConcurrentCalls
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value 500 for MaxConcurrentSessions
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value Info for DebugLevel
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] LoadConfigSettingsFromFile: using loaded value C:\temp\windowsdebugadws.log for DebugLogFile
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] ValidateSettingLimits: entered
ClassManager: [1/6/2015 5:51:37 PM] [6] Start: starting...
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [3] ScavengerThread: thread starting
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [3] Scavenger: waking up at 00:00:40 interval
EnumerationContextCache: [1/6/2015 5:51:37 PM] [6] EnumerationContextCache: using timer inverval 00:00:30
InstanceMap: [1/6/2015 5:51:37 PM] [6] InstanceMap: using timer inverval 00:01:00
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadAll: beginning
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadNTDSInstance: entered
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadNTDSInstance: found NTDS Parameters key
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadNTDSInstance: trying to change state to DC
InstanceMap: [1/6/2015 5:51:37 PM] [6] AddRemoveSessionPoolAndDictionaryEntry: trying to change state for identifier ldap:389
InstanceMap: [1/6/2015 5:51:37 PM] [6] AddSessionPool: adding a session pool for NTDS
DirectoryDataAccessImplementation: [1/6/2015 5:51:37 PM] [6] InitializeInstance: entering, instance=NTDS, init=5, max=10
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] InitializeInstance: entering, instance=NTDS, init=5, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 0
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=1, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 1
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=2, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 2
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=3, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 3
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=4, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 4
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=NTDS
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=NTDS, new count=5, max=10
InstanceMap: [1/6/2015 5:51:37 PM] [6] AddRemoveSessionPoolAndDictionaryEntry: state change successful (now hosts identifier ldap:389)
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadGCInstance: entered
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckForGlobalCatalog: entered
DirectoryUtilities: [1/6/2015 5:51:37 PM] [6] GetTimeRemaining: remaining time is 00:02:00
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckForGlobalCatalog: isGlobalCatalogReady: TRUE
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckForGlobalCatalog: NTDS Settings DN: CN=NTDS Settings,CN=XXX,CN=Servers,CN=Alpacoma,CN=Sites,CN=Configuration,DC=dominio,DC=com
DirectoryUtilities: [1/6/2015 5:51:37 PM] [6] GetTimeRemaining: remaining time is 00:02:00
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckForGlobalCatalog: options: 1
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadGCInstance: CheckForGlobalCatalog=True
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadGCInstance: trying to change state to Global Catalog
InstanceMap: [1/6/2015 5:51:37 PM] [6] AddRemoveSessionPoolAndDictionaryEntry: trying to change state for identifier ldap:3268
InstanceMap: [1/6/2015 5:51:37 PM] [6] AddSessionPool: adding a session pool for GC
DirectoryDataAccessImplementation: [1/6/2015 5:51:37 PM] [6] InitializeInstance: entering, instance=GC, init=5, max=10
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] InitializeInstance: entering, instance=GC, init=5, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 0
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=1, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 1
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=2, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 2
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=3, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 3
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=4, max=10
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ConnectionPool: trying to add connection 4
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: entering, instance=GC
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] ConnectionPoolEntry: connection created
ConnectionPool: [1/6/2015 5:51:37 PM] [6] AddConnectionIfPossible: grew pool, instance=GC, new count=5, max=10
InstanceMap: [1/6/2015 5:51:37 PM] [6] AddRemoveSessionPoolAndDictionaryEntry: state change successful (now hosts identifier ldap:3268)
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadADAMInstances: entered
InstanceMap: [1/6/2015 5:51:37 PM] [6] CheckAndLoadAll: caught unexpected exception System.IO.IOException: No more data is available.
at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.InternalGetSubKeyNames()
at Microsoft.ActiveDirectory.WebServices.InstanceMap.DiscoverInstancesFromRegistry(String regRootKey, String regKeyInstancePrefix, Boolean& instanceEncounteredErrorsOnThisRun, List`1 discoveredInstances, DirectoryType directoryType)
at Microsoft.ActiveDirectory.WebServices.InstanceMap.CheckAndLoadADAMInstances()
at Microsoft.ActiveDirectory.WebServices.InstanceMap.CheckAndLoadAll()
ADWSHost: [1/6/2015 5:51:37 PM] [6] OnClosed: entered
CustomActionCaches: [1/6/2015 5:51:37 PM] [6] StopCaches: disposing Custom Action connection caches
ClassManager: [1/6/2015 5:51:37 PM] [6] Stop: closing down...
EnumerationContextCache: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
QuotaTracker: [1/6/2015 5:51:37 PM] [6] Clear: clearing all usage
DirectoryActionImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
DirectoryDataAccessImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [3] ScavengerThread: woke up
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [3] ScavengerThread: received termination signal, exiting
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing pool
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing (instance=NTDS)...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ProhibitConnectionAcquisition: entering, instance=NTDS
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing pool
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing (instance=GC)...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] ProhibitConnectionAcquisition: entering, instance=GC
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
ConnectionPool: [1/6/2015 5:51:37 PM] [6] Dispose: disposing a ConnectionPoolEntry
ConnectionPoolEntry: [1/6/2015 5:51:37 PM] [6] Dispose: disposing...
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing utility connection NTDS
LdapSessionPoolImplementation: [1/6/2015 5:51:37 PM] [6] Dispose: disposing utility connection GC
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] StopConfigurationLoading: entered
ConfigurationSettings: [1/6/2015 5:51:37 PM] [6] Dispose: disposing
Some Idea, Tks for your help.
migrations

Here a dump file when I try to start the service, I hope can you help me.
Version=1
EventType=CLR20r3
EventTime=130652059133527283
ReportType=2
Consent=1
ReportIdentifier=4368792e-974e-11e4-93f7-3440b59e2092
IntegratorReportIdentifier=4368792d-974e-11e4-93f7-3440b59e2092
NsAppName=Microsoft.ActiveDirectory.WebServices.exe
Response.type=4
Sig[0].Name=Problem Signature 01
Sig[0].Value=V0KXCIQIJBOA2NW5DIQBFTEBV5SCPPFH
Sig[1].Name=Problem Signature 02
Sig[1].Value=6.2.9200.16579
Sig[2].Name=Problem Signature 03
Sig[2].Value=516356a2
Sig[3].Name=Problem Signature 04
Sig[3].Value=System.ServiceModel
Sig[4].Name=Problem Signature 05
Sig[4].Value=4.0.30319.34230
Sig[5].Name=Problem Signature 06
Sig[5].Value=53be5c02
Sig[6].Name=Problem Signature 07
Sig[6].Value=ca
Sig[7].Name=Problem Signature 08
Sig[7].Value=c4
Sig[8].Name=Problem Signature 09
Sig[8].Value=I0SHPZEWVQV4P1UJY40X15MQTHF34RR5
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.2.9200.2.0.0.272.7
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=5220
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=52200675db6baa97bf416b02ff886e01
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=0b14
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=0b146b7eb5ed6bd9871c898c60ee5051
UI[2]=C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe
UI[5]=Check online for a solution (recommended)
UI[6]=Check for a solution later (recommended)
UI[7]=Close
UI[8]=Microsoft.ActiveDirectory.WebServices stopped working and was closed
UI[9]=A problem caused the application to stop working correctly. Windows will notify you if a solution is available.
UI[10]=&Close
LoadedModule[0]=C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Windows\SYSTEM32\MSCOREE.DLL
LoadedModule[3]=C:\Windows\system32\KERNEL32.dll
LoadedModule[4]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[5]=C:\Windows\SYSTEM32\dlphook.x64.dll
LoadedModule[6]=C:\Windows\SYSTEM32\VERSION.dll
LoadedModule[7]=C:\Windows\system32\PSAPI.DLL
LoadedModule[8]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[9]=C:\Windows\system32\WS2_32.dll
LoadedModule[10]=C:\Windows\system32\msvcrt.dll
LoadedModule[11]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[12]=C:\Windows\system32\RPCRT4.dll
LoadedModule[13]=C:\Windows\system32\NSI.dll
LoadedModule[14]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscoreei.dll
LoadedModule[15]=C:\Windows\system32\SHLWAPI.dll
LoadedModule[16]=C:\Windows\system32\USER32.dll
LoadedModule[17]=C:\Windows\system32\GDI32.dll
LoadedModule[18]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll
LoadedModule[19]=C:\Windows\SYSTEM32\MSVCR110_CLR0400.dll
LoadedModule[20]=C:\Windows\assembly\NativeImages_v4.0.30319_64\mscorlib\51fbf5aac9c6f1aef14557276f98ad28\mscorlib.ni.dll
LoadedModule[21]=C:\Windows\system32\ole32.dll
LoadedModule[22]=C:\Windows\SYSTEM32\combase.dll
LoadedModule[23]=C:\Windows\SYSTEM32\CRYPTBASE.dll
LoadedModule[24]=C:\Windows\SYSTEM32\bcryptPrimitives.dll
LoadedModule[25]=C:\Windows\SYSTEM32\CRYPTSP.dll
LoadedModule[26]=C:\Windows\system32\rsaenh.dll
LoadedModule[27]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clrjit.dll
LoadedModule[28]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[29]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System\803e478b5cb2fe994c4f977853849956\System.ni.dll
LoadedModule[30]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Serv759bfb78#\060758702287150a3b9ca51bfbd135e4\System.ServiceProcess.ni.dll
LoadedModule[31]=C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.Shared.dll
LoadedModule[32]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Configuration\af08c33d3e853168e58f0bb32118170b\System.Configuration.ni.dll
LoadedModule[33]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Core\5641065f716dfd6c76dd7bc6ab18c47a\System.Core.ni.dll
LoadedModule[34]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Xml\b3344890d2d919e93f506faabd08186a\System.Xml.ni.dll
LoadedModule[35]=C:\Windows\system32\urlmon.dll
LoadedModule[36]=C:\Windows\system32\iertutil.dll
LoadedModule[37]=C:\Windows\system32\WININET.dll
LoadedModule[38]=C:\Windows\system32\USERENV.dll
LoadedModule[39]=C:\Windows\system32\profapi.dll
LoadedModule[40]=C:\Windows\SYSTEM32\Secur32.dll
LoadedModule[41]=C:\Windows\SYSTEM32\SSPICLI.DLL
LoadedModule[42]=C:\Windows\system32\SHELL32.dll
LoadedModule[43]=C:\Windows\SYSTEM32\SHCORE.dll
LoadedModule[44]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Dire5d62f0a2#\7ab37f1ca732666c1ab41d8e500942e0\System.DirectoryServices.Protocols.ni.dll
LoadedModule[45]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.ServiceModel\4e643cb8b12402db89eb2d5839872b78\System.ServiceModel.ni.dll
LoadedModule[46]=C:\Windows\assembly\NativeImages_v4.0.30319_64\SMDiagnostics\02b9ba874b1c07b6016aa9406745e96b\SMDiagnostics.ni.dll
LoadedModule[47]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Web.Services\f936aad8a951da6674d460db1855a3db\System.Web.Services.ni.dll
LoadedModule[48]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Servd1dec626#\8944debbd3293f930c7e37b64aed0d77\System.ServiceModel.Internals.ni.dll
LoadedModule[49]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.IdentityModel\5844c97798b9e56b45cb0e5d3505ffd2\System.IdentityModel.ni.dll
LoadedModule[50]=C:\Windows\system32\crypt32.dll
LoadedModule[51]=C:\Windows\system32\MSASN1.dll
LoadedModule[52]=C:\Windows\SYSTEM32\DPAPI.dll
LoadedModule[53]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Runteb92aa12#\3838e7c87e962eaec01572bff0396922\System.Runtime.Serialization.ni.dll
LoadedModule[54]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Servf73e6522#\38df17ed0feec9b27d7d33272eecc176\System.ServiceModel.Web.ni.dll
LoadedModule[55]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Dired13b18a9#\4ecba93b4eae5bb0c97205c4e4196702\System.DirectoryServices.ni.dll
LoadedModule[56]=C:\Windows\system32\wldap32.dll
LoadedModule[57]=C:\Windows\system32\mswsock.dll
LoadedModule[58]=C:\Windows\SYSTEM32\DNSAPI.dll
LoadedModule[59]=C:\Windows\System32\rasadhlp.dll
LoadedModule[60]=C:\Windows\System32\fwpuclnt.dll
LoadedModule[61]=C:\Windows\SYSTEM32\IPHLPAPI.DLL
LoadedModule[62]=C:\Windows\SYSTEM32\WINNSI.DLL
LoadedModule[63]=C:\Windows\SYSTEM32\DSPARSE.dll
LoadedModule[64]=C:\Windows\system32\kerberos.DLL
LoadedModule[65]=C:\Windows\SYSTEM32\cryptdll.dll
LoadedModule[66]=C:\Windows\SYSTEM32\bcrypt.dll
LoadedModule[67]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\diasymreader.dll
FriendlyEventName=Stopped working
ConsentKey=CLR20r3
AppName=Microsoft.ActiveDirectory.WebServices
AppPath=C:\Windows\ADWS\Microsoft.ActiveDirectory.WebServices.exe
NsPartner=windows
NsGroup=windows8
Tks for your help.
migrations

Failed to install Active directory domain services

Hi,
I've installed the AD Domain Services on Windows2008R2 by following this guide http://technet.microsoft.com/en-gb/library/cc755059%28WS.10%29.aspx. After click 'Install', step 6, it showed failed to install but there is no clue why it was failed, at all.
Here is a log I copied from C:\Windows\logs\ServerManager.log
2204: 2011-01-05 12:57:54.333 [InstallationProgressPage] Loading progress page...
2204: 2011-01-05 12:57:54.411 [InstallationProgressPage] Begining Sync operation...
2204: 2011-01-05 12:57:54.458 [Sync]
Sync Graph of changed nodes
==========
name : Active Directory Domain Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : Active Directory Domain Controller
guest[2] : Identity Management for UNIX
ant. : empty
pred. : empty
provider : null
name : Active Directory Domain Controller
state : Changed
rank : 4
sync tech: CBS
ant. : .NET Framework 3.5.1
pred. : Active Directory Domain Services, .NET Framework 3.5.1
provider : Provider
2204: 2011-01-05 12:57:54.458 [Sync] Calling sync provider of Active Directory Domain Controller ...
2204: 2011-01-05 12:57:54.473 [Provider] Sync:: guest: 'Active Directory Domain Controller', guest deleted?: False
2204: 2011-01-05 12:57:54.473 [Provider] Begin installation of 'Active Directory Domain Controller'...
2204: 2011-01-05 12:57:54.473 [Provider] Install: Guest: 'Active Directory Domain Controller', updateElement: 'DirectoryServices-DomainController'
2204: 2011-01-05 12:57:54.473 [Provider] Installation queued for 'Active Directory Domain Controller'.
2204: 2011-01-05 12:57:54.473 [CBS] installing 'DirectoryServices-DomainController ' ...
2204: 2011-01-05 12:57:55.020 [CBS] ...parents that will be auto-installed: 'NetFx3 '
2204: 2011-01-05 12:57:55.020 [CBS] ...default children to turn-off: '<none>'
2204: 2011-01-05 12:57:55.036 [CBS] ...current state of 'DirectoryServices-DomainController': p: Staged, a: Staged, s: UninstallRequested
2204: 2011-01-05 12:57:55.036 [CBS] ...setting state of 'DirectoryServices-DomainController' to 'InstallRequested'
2204: 2011-01-05 12:57:55.051 [CBS] ...current state of 'NetFx3': p: Installed, a: Installed, s: InstallRequested
2204: 2011-01-05 12:57:55.051 [CBS] ...skipping 'NetFx3' because it is already in the desired state.
2204: 2011-01-05 12:57:55.098 [CBS] ...'DirectoryServices-DomainController' : applicability: Applicable
2204: 2011-01-05 12:57:55.114 [CBS] ...'NetFx3' : applicability: Applicable
2204: 2011-01-05 12:57:55.770 [CbsUIHandler] Initiate:
2204: 2011-01-05 12:57:55.770 [InstallationProgressPage] Installing...
2204: 2011-01-05 12:58:49.176 [CbsUIHandler] Error: -2147021879 :
2204: 2011-01-05 12:58:49.176 [CbsUIHandler] Terminate:
2204: 2011-01-05 12:58:49.254 [InstallationProgressPage] Verifying installation...
2204: 2011-01-05 12:58:49.270 [CBS] ...done installing 'DirectoryServices-DomainController '. Status: -2147021879 (80070bc9)
2204: 2011-01-05 12:58:49.270 [Provider] Skipped configuration of 'Active Directory Domain Controller' because install operation failed.
2204: 2011-01-05 12:58:49.270 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
 'Active Directory Domain Controller'[STAT] installation(s) took '54.7870005' second(s) total.
[STAT] Configuration(s) took '0.0003053' second(s) total.
[STAT] Total time: '54.7873058' second(s).
2204: 2011-01-05 12:58:49.270 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 110
2204: 2011-01-05 12:58:49.286 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
made
2204: 2011-01-05 12:58:49.286 [InstallationProgressPage] Sync operation completed
2204: 2011-01-05 12:58:49.286 [InstallationProgressPage] Performing post install/uninstall discovery...
2204: 2011-01-05 12:58:49.286 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2204: 2011-01-05 12:58:49.286 [CBS] IsCacheStillGood: False.
2204: 2011-01-05 12:58:49.786 [CBS] >>>GetUpdateInfo--------------------------------------------------
2204: 2011-01-05 12:59:46.520 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
2204: 2011-01-05 12:59:46.520 [CBS] <<<GetUpdateInfo--------------------------------------------------
2204: 2011-01-05 12:59:46.598 [DISCOVERY] hr: -2147021879 -> reboot required.
2204: 2011-01-05 12:59:46.739 [InstallationProgressPage] About to load finish page...
2204: 2011-01-05 12:59:46.739 [InstallationFinishPage] Loading finish page
2204: 2011-01-05 12:59:46.801 [InstallationFinishPage] Finish page loaded
I also checked the event viewer, here are the event properties occurred during the installation:
Initiating changes to turn on update DirectoryServices-DomainController of package DirectoryServices-DomainController-Package. Client id: RMT
Update Directoryservices-DomainController of package DirectoryServices-DomainController-Package failed to be turned on. Status: 0x80070bc9
Installation failed. A restart is required.
Roles:
Active Directory Domain Services
Error: The server needs to be restarted to undo the changes
Please help.
Thanks,
balrogz

Another thing to check is to ensure the server service is up and running.
http://blogs.dirteam.com/blogs/paulbergson/archive/2014/04/29/can-t-add-the-role-quot-active-directory-domain-services-quot-to-my-2008-r2-server.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Cannot add Active Directory Domain Services role on - DirectoryServices-DomainController . Status: -2147021879 (80070bc9)

Hi everyone,
I've been banging my head against this for a while and hope someone can help me.
Running Windows Server 2008 R2 Standard with Service Pack 1.
When I try to add the Active Directory Domain Services role to the server it gets to about 90% complete and then dies.
The ServerManager.log shows the following information, I have run the System Readiness Tool - output below - with no errors found.
At a loss on what to do next. The only other links I've found suggest rebuilding the server which I would really like to avoid...
Help appreciated,
John
ServerManager.log (extract)
==========
name : Active Directory Domain Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : Active Directory Domain Controller
guest[2] : Identity Management for UNIX
ant. : empty
pred. : empty
provider : null
name : Active Directory Domain Controller
state : Changed
rank : 4
sync tech: CBS
ant. : .NET Framework 3.5.1
pred. : Active Directory Domain Services, .NET Framework 3.5.1
provider : Provider
8720: 2012-01-18 10:54:41.853 [Sync] Calling sync provider of Active Directory Domain Controller ...
8720: 2012-01-18 10:54:41.853 [Provider] Sync:: guest: 'Active Directory Domain Controller', guest deleted?: False
8720: 2012-01-18 10:54:41.853 [Provider] Begin installation of 'Active Directory Domain Controller'...
8720: 2012-01-18 10:54:41.853 [Provider] Install: Guest: 'Active Directory Domain Controller', updateElement: 'DirectoryServices-DomainController'
8720: 2012-01-18 10:54:41.853 [Provider] Installation queued for 'Active Directory Domain Controller'.
8720: 2012-01-18 10:54:41.853 [CBS] installing 'DirectoryServices-DomainController ' ...
8720: 2012-01-18 10:54:42.399 [CBS] ...parents that will be auto-installed: 'NetFx3 '
8720: 2012-01-18 10:54:42.399 [CBS] ...default children to turn-off: 'WCF-HTTP-Activation '
8720: 2012-01-18 10:54:42.415 [CBS] ...current state of 'DirectoryServices-DomainController': p: Staged, a: Staged, s: UninstallRequested
8720: 2012-01-18 10:54:42.415 [CBS] ...setting state of 'DirectoryServices-DomainController' to 'InstallRequested'
8720: 2012-01-18 10:54:42.430 [CBS] ...current state of 'NetFx3': p: Installed, a: Installed, s: InstallRequested
8720: 2012-01-18 10:54:42.430 [CBS] ...skipping 'NetFx3' because it is already in the desired state.
8720: 2012-01-18 10:54:42.430 [CBS] ...current state of default child 'WCF-HTTP-Activation': p: Installed, a: Installed, s: InstallRequested
8720: 2012-01-18 10:54:42.430 [CBS] ...skipped child 'WCF-HTTP-Activation' because it is already installed
8720: 2012-01-18 10:54:42.461 [CBS] ...'DirectoryServices-DomainController' : applicability: Applicable
8720: 2012-01-18 10:54:42.461 [CBS] ...'NetFx3' : applicability: Applicable
8720: 2012-01-18 10:54:42.539 [CbsUIHandler] Initiate:
8720: 2012-01-18 10:54:42.539 [InstallationProgressPage] Installing...
8720: 2012-01-18 10:54:42.758 [InstallationProgressPage] Verifying installation...
8720: 2012-01-18 10:54:42.758 [InstallationProgressPage] Installing...
8720: 2012-01-18 10:55:03.740 [CbsUIHandler] Error: -2147021879 :
8720: 2012-01-18 10:55:03.740 [CbsUIHandler] Terminate:
8720: 2012-01-18 10:55:03.787 [InstallationProgressPage] Verifying installation...
8720: 2012-01-18 10:55:03.802 [CBS] ...done installing 'DirectoryServices-DomainController '. Status: -2147021879 (80070bc9)
8720: 2012-01-18 10:55:03.818 [Provider] Skipped configuration of 'Active Directory Domain Controller' because install operation failed.
8720: 2012-01-18 10:55:03.818 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Active Directory Domain Controller'[STAT] installation(s) took '21.9535541' second(s) total.
[STAT] Configuration(s) took '0.0007754' second(s) total.
[STAT] Total time: '21.9543295' second(s).
8720: 2012-01-18 10:55:03.818 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 110
8720: 2012-01-18 10:55:03.818 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes made
8720: 2012-01-18 10:55:03.818 [InstallationProgressPage] Sync operation completed
8720: 2012-01-18 10:55:03.818 [InstallationProgressPage] Performing post install/uninstall discovery...
8720: 2012-01-18 10:55:03.833 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
8720: 2012-01-18 10:55:03.833 [CBS] IsCacheStillGood: False.
8720: 2012-01-18 10:55:04.333 [CBS] >>>GetUpdateInfo--------------------------------------------------
8720: 2012-01-18 10:55:34.784 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
8720: 2012-01-18 10:55:34.784 [CBS] <<<GetUpdateInfo--------------------------------------------------
8720: 2012-01-18 10:55:34.815 [DISCOVERY] hr: -2147021879 -> reboot required.
8720: 2012-01-18 10:55:34.831 [InstallationProgressPage] About to load finish page...
8720: 2012-01-18 10:55:34.831 [InstallationFinishPage] Loading finish page
8720: 2012-01-18 10:55:34.831 [InstallationFinishPage] Finish page loaded
CheckSUR.log
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 13.0
2012-01-18 10:33
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 220
No errors detected

Hi John,
Thanks for posting.
Performed some research and some results say that this problem can be caused by HD Write Caching.
To disable Write Caching:
1. Go to Device Manager.
2.Click the plus sign (+) next to the Disk Drives branch to expand it.
3.Right-click the drive on which you want to enable or disable disk write caching, and then click Properties.
4.Click the Disk Properties tab.
5.Click to select or clear the Write Cache Enabled check box as appropriate.
6.Click OK.
If no luck, Please check if any erros can be found in Event log, Dcpromoui.Log and Dcpromo.log
The following articles maybe helpful to you:
Known Issues for Installing and Removing AD DS
http://technet.microsoft.com/en-us/library/cc754463(v=WS.10).aspx
You cannot install Active Directory Domain Services
http://support.microsoft.com/kb/975142
Thanks
ZHANG

SCVMM 2008 R2 - "The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS)."

I know this question has been asked before, but never for R2, that I can tell, and the posted fixes aren't working. I have just installed SCVMM 2008 R2 on a Windows Server 2008 R2 server, using a remote SQL 2008 SP1 database. When I attempt to connect to SCVMM, I get the following error:
"The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS).
Ensure that the SQL Server service is running under a domain account or a computer account that has permission to access AD DS. For more information, see "Some applications and APIs require access to authorization information on account objects" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=121054.
ID: 2607"
What I've seen online is that this is usually becuase the domain account SCVMM is running as does not have the proper permissions on the SQL database. Here's what I've confirmed:
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still "doesn't have access to AD DS," which is obviously untrue)
5) Neither service account is locked out
Has anyone run in to this? It says in Technet that remote SQL 2008 is supported, as long as the SQL management studio is installed to the SCVMM server, and I installed and patched before I began the SCVMM installation. I just don't know what else to try - I have no errors in event logs, no issues during the installation itself...
Andrew Topp

That answer was very unhelpful fr33m4n. The individual mentions that they've received the error that points to the KB article. I currently receive the same error -- there seems to be no resolution. I've run the Microsoft VBS script to add TAUG to the WAAG
as suggested by 331951, and that made absolutely no difference.
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still
"doesn't have access to AD DS," which is obviously untrue)
The user is also a member of WAAG, the machines have delegated authority to each other. Is there any other solution?

The Active Directory Domain Services is currently unavailable....printer "unseen"

I Have a Windows 7 on an Acer Aspire 5742 laptop and an HP LaserjetP1102w. There are two wireless laptops in the household. I am trying to print from Microsoft Word Starter, but it states "No Printers Installed" and if I try to add a printer I get the message: The Active Directory Domain Services is currently unavailable.
I can print Self Test/Device configuration sheets (on this the iPv4 reads as 0.0.0.0.), a printer test page and a test print from the HP Print and Scan Doctor. It is the network which is not reading the printer.
I have disabled my firewall, un- and re-installed the printer. I have also tried to uninstall and reinstall the printer using the Window 7 installer utility. but that tells this printer "is not currently supported by this Wizard"
I have searched the web for people with the same problem but found nothing that has helped me. Not to put too fine a point on it I am at my wit's end.
You are my last resort (no pressure, then!)
This question was solved.
View Solution.

Are the configuration reports with the 0.0.0.0 being printed directly from the printer? A 0.0.0.0 address indicates the printer is not actually on the network (or at least not getting DHCP information from the router). The Print and Scan Doctor should not have been able to print to it unless it happened to be connected by a USB cable as well.
What brand and model is the router?
Is the wireless light a solid blue light or a flashing blue light?
You mentioned an Active Directory Domain Services error message. Outside of corporate networks, this is not an error message you should get. I suspect there might be a deeper software issue at fault. Please provide the exact steps you are using to add the printer to generate that error message.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Cannot Print. "The Active Directory Domain Services is currently unavailable"

Hi there
I cannot print and I have not been able to find the fix via existing forum threads.
System:
Win 7 Ultimate 64 bit German - Profile language is Danish (installed a week ago and completely windows updated)
Office 365 Small Business Premium
HP DV8 Laptop. i7, 512GB SSD, 8GB RAM
HP LaserJet P1006 USB printer.
Problem
No matter if I try to print from IE, Notebook, Word 2013 or anything else, I cannot chose my printer (P1006).
If I try to Add Printer in Word 2013, I get the "The Active Directory Domain Services is currently unavailable" error.
In Devices and Printers, the P1006 is visible, but there is no driver installed.
Trying to install the correct driver:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3435683&prodTypeId=18972&prodSeriesId=3435682&swLang=8&taskId=135&swEnvOID=4063
only creates a general error during installation: "Printer Software Installer has stopped working - A problem has caused the program to stop working correctly. Windows closes the program and will notify you if a solution has been found"
I have tried all the solution software from Windows, from HP (for the laptop and for the printer) - but nothing comes up with any details or suggestions.
What should I try?
Absolutely everything else works perfectly on the system.
Reffered here via http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cannot-print-the-active-directory-domain-services/1cf47626-a2cd-4b7a-94b6-10cbc8ab02b0

Hi,
I suggest you try the following:
1. Try the steps in the following article:
Troubleshoot printer problems
http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
Fix printing problems by resetting the print spooler
http://support.microsoft.com/kb/2000007
2. Let us try updating the printer driver which might help you in resolving the issue.
Click on the link below for more information on updating the printer drivers.
Find and install printer drivers
http://windows.microsoft.com/en-US/windows-vista/Find-and-install-printer-drivers
3. Remove the printer and add it again:
Go to Control Panel
  Select Printers
  Right-click on Add Printer
  Select Run as Administrator
Now try to add your network printer
Also a thread for your reference:
Error message when attempting to print: Active Directory Domain Service is Currently Unavailable
http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/d6212275-24d6-4168-830a-9441f861cb76
Hope this helps.
Vincent Wang
TechNet Community Support

Activation of SICF services in batch?

Similar Messages

Maybe you are looking for