Activation of update rule :Help Required Urgently!!

Hi
I am not able to activate an update rule from an ods to cube.
In the start routine I am populating ITAB with amt when I add the following code in the update routine for amt :
READ TABLE ITAB WITH KEY RECORD_NO.
RESULT = ITAB-AMT.
I am unable to activate and get the to check error.
the data object 'g_s_kb' does not hav a component called /bic/bspart
The object specified in the error was earlier present in the comm. structure of the infosource (ZT_RPM_ITEM_D) which loads the ods ZRPM_OA1
I am getting this error in the update rule of the cube which I am updating from this ods.
When I encountered this error I removed that info object ZBSPART from the comm. structure.
It is not present in any of the objects now. Also I had recreated both the update rules after I removed that info object from comm. structure.
Kindly provide pointers to the same.

Hi,
Yeah the object was initally itslef only in the comm structure which i deleted
After deleting it i deleted both URs and recreated them
Still gegtting the issue....
Please provide any leads to this strange problem!
Thank you,
Regards,
Rathy

Similar Messages

Cube update rules transport failing-urgent

Hello All,
We had a set of TPs created for our project. All went well to the QA system. But when we tried to move these transports to the PROD, first we had a set of TPs failed, all related to the activation of the update rules of the cube we have. We found that this happened ( I think so) because we missed sending changes of a few display attributes, changed to Navigational attributes, to PROD. These navigational attributes are used in the cube. Even after sending the changes of display attributes to NAV attributes, still the TPs are failing. We tried activating the cube update rules by creating new TP and transporting to PROD. But the TP failed. As nobody in us have the authorization for activating the update rules directly in PROD, we are facing the problem. We are in doubt even if we create another new TP for activation of the UR, we may still fail to activate the UR.
Can anybody help me with this.
Many Thanks in advance
Vinay

Hello Dinesh,
When I recreated transports, I included the cube and its update rules in 2 transports. All other object, like the infoobjects changed/created, Navigational attributes are already in production box. When I sent the TPs with cube activation and update rules activation, the TP with the UR activation failed again.
Hi Siggi,
When I try to open the update rules in PROD, I am unable to open and I get a message that there is error in UR coming from the data mart infosource to the cube.
Could you please suggest me something more.
Thanks a lot
Regards
Vinay

Error in activation of update rules.

Hi,
I get an error - 'IC=0PP_C02 IS=2LIS_04_P_MATNR error when checking the update rules' while activating the update rules in BI content. Rest all the data flow is activated except update rules.
Can anyone throw some light on this?
Thanks & Regards,
Manisha

Hi ,
Check the update rule.
In that there are two routines.
In the first one Goods being processed & 2nd one as well , there is syntax err.
/BI0/APP_O010 doest exist.
Mostly it is fetching some data from some dso in this routine.
So it should be activated.
Then update rules will be activated.
Regards,
Devina

Error in activating the update rules

Hi All
I am getting an error while activating Business Content update rules.
I have activate Cube and corresponding InfoCube and was trying to select update rule for the Cube and installing it.
It however gives an error saying Update Rules (Technical Name) are not found.
Anyone encountered this in the past.
If yes let me know the remedy
Regards
PB

Hi P B,
This might be a long shot, but I still want to see if I can be of any assistance:
Have you encountered SAP note 789272 and SAP note 787875?
They should be contained in SP 19 for BW 310, and your errors do resemble those we encountered, albeit using a different version of BW. These notes are relevant for both mine and your version.
Otherwise, I'll gladly have a look at your error messages you can send over here.
Best Regards,
Daniel

Help required urgently please help

i am facing problem on oracle 9i platform the problem is
ORA-00379: no free buffers available in buffer pool DEFAULT for block size 16K
WHILE I AM EXECUTING THIS SQL COMMAND
SELECT * FROM PR_RMRDDATA_M
PR_RMRDDATA_M IS ONE OF MY VERY BIG TABLE

BPeasland wrote:
I guess a response after 4.5 months means the help was not required urgently. ;)
Cheers,
BrianGlance at the timestamps again...
It wasn't 4.5 months. It was a year and 4.5 months.
<insert smiley emoticon here>
Additionally, the original poster abandoned the thread after they stopped shouting at everyone.
Their username profile shows they almost never return to mark anything "resolved".
This thread is now locked to prevent more "me too" resurrection posts.

Activation of Update Rule in BW 7.0

Hi Gurus,
We just upgraded BW 3.5 to 7.0. One of the load is failing because update rule is disabled in BW 7.0. Please tell me how to re activate the update rule in BW 7.0.
Regards,
Anil

Hi Anil,
Check this note:
<a href="https://websmp204.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=925304&_NLANG=E">925304 - P8:P31:SDL: Warnings for 'filtered out' data targets</a>
Note solution:
<a href="https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0000954730">Note solution</a>
Let us know if you still face issue after applying the solution

Error while activating the update rules related to Inventory

Hi,
In standard Cube 0ic_c03, I am including a field 0MAT_DOC that is available in the transfer rules of 2lis_03_bx. And when I include that info object in the cube my update rules are getting deactivated.
When I try to activate the update rules, I am getting the following error message:
1. InfoSource 2LIS_03_BX is only set up for the initial run for non-cumulatives.
2. IC=0IC_C03 IS=2LIS_03_BX error when checking the update rules.
Requesting you to please guide me on how do I go about solving this issue.
Thanks & Regards.

Hi Ganesh,
For implementation of inventory in the BW side, first you need to carry out following steps sequentially:
1. MCNB: Filling set up tables for initial entry of stock balances from 2lis_03_BX
2. OLI1BW:Filling set up tables for stock movements from 2lis_03_BF.
3. OLIZBW:Filling set up tables for inventory revaluations from 2lis_03_UM
Check the Business content cube 0IC_C03.
Also check the document how to inventory management.
For report install the business content report for the cube 0IC_C03 and check it.
check this link for inventory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards
Pcrao.

Java Mail,SMTP server not starting,help required urgently

Hi i have been working on java mail .Yesterday it was working ok but today suddenely i am getting this thing.its not starting the smtp server i guess,just exiting and get the command prompt ..dont know what to do.help required how to go about this error
am pasting the debug information.please check and let me know
the compilation ,smtp server and others are all valid
thanks
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Pavan>cd C:\Program Files\Java\jdk1.5.0_07\bin
C:\Program Files\Java\jdk1.5.0_07\bin>javac jdbcExample3.java
C:\Program Files\Java\jdk1.5.0_07\bin>java jdbcExample3 smtpserver address
DEBUG: JavaMail version 1.4ea
DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
javamail.providers (The system cannot find the file specified)
DEBUG: !anyLoaded
DEBUG: not loading resource: /META-INF/javamail.providers
DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
DEBUG: Tables of loaded providers
DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax
.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsyste
ms, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com
.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLSt
ore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsyst
ems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.su
n.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=jav
ax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc],
com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP
3Store,Sun Microsystems, Inc]}
DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.
sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STOR
E,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Prov
ider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc],
pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems
, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun
Microsystems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.S
MTPTransport,Sun Microsystems, Inc]}
DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
DEBUG: !anyLoaded
DEBUG: not loading resource: /META-INF/javamail.address.map
DEBUG: java.io.FileNotFoundException: C:\Program Files\Java\jdk1.5.0_07\jre\lib\
javamail.address.map (The system cannot find the file specified)
C:\Program Files\Java\jdk1.5.0_07\bin>

The debug output doesn't show an obvious problem. You're
going to have to actually debug your program. A debugger
might be helpful.

GroupWise Help Required || Urgent

hi Experts,
please help me on below queries -
(A) Create Contacts in Global Address book in Novell GroupWise server manually. i have exchange servers in my Organization and i want to view my exchange mailboxes in GroupWise Address book so that my users can directly send mails to exchange users via Address lists.(external contacts in exchange are known as mail contacts/contacts. also i dont want to use any third party tool for Dirsync/migration purpose).
(B) Set Forwarder on GroupWise Mailbox so that new incoming mail will be deliver to remote domain recipient (exchange mailbox) with or without delivering to GroupWise Mailbox locally). i don't want to configure client rules to achieve this goal. i need this to be done via central administration tool for GroupWise servers.
(C) if we create External Contact with different Email Domain Name (i.e. @XYZ.Com, which is my exchange SMTP Domain) and we have Primary Domain as @ABC.Com (this is my GroupWise SMTP Domain), in this condition can we assign additional email address to external User. so that my external user will have both GroupWise SMTP Email Address and Exchange SMTP Address. in this case new mails to my GroupWise ID should be delivered to my exchange Mailbox because i don't want to keep mailbox in Groupwise
it is really urgent and any information or step by step docs or Urls are really appreciated.
i have gone through the non-groupwise domain creation document but not sure what server and domain name entries i have to put during configuration for Non-Groupwise domain and external users. also what would be GIWA configuration. please provide me the SOPs if any one has already done this in past.
regards,
Aanand Karki

AanandKarki wrote:
>
> hi Experts,
>
> please help me on below queries -
>
> (A) Create Contacts in Global Address book in Novell GroupWise server
> manually. i have exchange servers in my Organization and i want to
> view my exchange mailboxes in GroupWise Address book so that my users
> can directly send mails to exchange users via Address lists.(external
> contacts in exchange are known as mail contacts/contacts. also i dont
> want to use any third party tool for Dirsync/migration purpose).
>
> (B) Set Forwarder on GroupWise Mailbox so that new incoming mail will
> be deliver to remote domain recipient (exchange mailbox) with or
> without delivering to GroupWise Mailbox locally). i don't want to
> configure client rules to achieve this goal. i need this to be done
> via central administration tool for GroupWise servers.
>
> (C) if we create External Contact with different Email Domain Name
> (i.e. @XYZ.Com, which is my exchange SMTP Domain) and we have Primary
> Domain as @ABC.Com (this is my GroupWise SMTP Domain), in this
> condition can we assign additional email address to external User. so
> that my external user will have both GroupWise SMTP Email Address and
> Exchange SMTP Address. in this case new mails to my GroupWise ID
> should be delivered to my exchange Mailbox because i don't want to
> keep mailbox in Groupwise
>
> it is really urgent and any information or step by step docs or Urls
> are really appreciated.
This is all handled by our new GroupWise/Exchange coexistence solution.
There's no need to create anything manually on either side. With
coexistence configured, users on both sides automatically sync as
contacts on the other side, plus you also get free/busy searching.
Here's the documention on coexistence.
http://www.novell.com/documentation/.../bookinfo.html
Please note this also requires some additional licensing. Please
contact your friendly Novell sales rep or partner for more assistance.
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Table Maintanance Help Required-urgent

Hi All,
I generating table maintanance generator for the table zuser_Secobjects. In this table GUID is a primary key and APPLN,APPLN_TYPE,PARTNER_TYPE are the non primary keys. I am using two screens method here. on both screens i am not showing GUID ( i am hiding this field in screen1 and screen 2) whenvere new record is created for every record guid is going to create. now my reuirement when i click on position(pushbutton) name in screen 1 it has to show APPLN,APPLN_TYPE,PARTNER_TYPE where as these 4 fields are non primary keys . i am getting uniqire record using guid. so i am keeping guid as primary key.i can't keep these 4 fields as primary keys in the table zuser_secobjects.
anybody can faced this kind of problem if so please let me know whow to approach in this case.
thanks,
maheedhar.t

Hai Maheedhar,
I have also faced the related problem.
Please refer the below links.
It will helps you a lot.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
Don'forget to activate it.
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
Please refer the below links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Reward points if it helps you.
Regds,
Rama chary.Pammi

GroupWise 8.0.3 Help Required || Urgent

hi Experts,
please help me on below queries -
(A) Create Contacts in Global Address book in Novell GroupWise server manually. i have exchange servers in my Organization and i want to view my exchange mailboxes in GroupWise Address book so that my users can directly send mails to exchange users via Address lists.(external contacts in exchange are known as mail contacts/contacts. also i dont want to use any third party tool for Dirsync/migration purpose).
(B) Set Forwarder on GroupWise Mailbox so that new incoming mail will be deliver to remote domain recipient (exchange mailbox) with or without delivering to GroupWise Mailbox locally). i don't want to configure client rules to achieve this goal. i need this to be done via central administration tool for GroupWise servers.
(C) if we create External Contact with different Email Domain Name (i.e. @XYZ.Com, which is my exchange SMTP Domain) and we have Primary Domain as @ABC.Com (this is my GroupWise SMTP Domain), in this condition can we assign additional email address to external User. so that my external user will have both GroupWise SMTP Email Address and Exchange SMTP Address. in this case new mails to my GroupWise ID should be delivered to my exchange Mailbox because i don't want to keep mailbox in Groupwise
it is really urgent and any information or step by step docs or Urls are really appreciated.
i have gone through the non-groupwise domain creation document but not sure what server and domain name entries i have to put during configuration for Non-Groupwise domain and external users. please provide me the SOPs if any one has already done this in past.
regards,
Aanand Karki

If you do all the above, the GroupWise mailboxes would seem to not be used any longer. Why would you want to do all of this in the first place?

... PPL Help required Urgent for Viewing Data

Hi . sorry for such simple question..
I have displayed 3 different blocks on a same canvas1 and one block on tab canvas placed on the canvas1
Now i made a menu bar where one of my menu is
view data.
behind that menu i m writing the code.
select st_id from Site where st_id = :txtstid;
but when i compile it says bad bind variable :txtstid;
when i remove the colon, it says identifier required txtstid...
Now what to do..
Then i wrote..
go_block('Site');
go_item('item1')
and now it compiled properly but when i run it .. it is not giong to that item..
may b i m doing something wrong.. how to interact with menu s..
cant i put the same functionality behind them as we do behind button press triggers..
I need to do it urgent so kindly asses what is happening ..
cant we place more than one block on same canvas and then access thier items
with the block name.
like Site.stid.
stid by the way is the text item.. that contains the site ids.. at run time..
Kindly gimme some advices. the form is so large that it is not easier me making it again..
BR

One more thing ppl...
the same fucntionality is working behind the Button i have created..
so plz help it out.. BR

Updating BDC: Help required...

Hi All,
I have a requirement to update a Transaction 'FD32' using BDC. But in my case the user doesnt have authorization to this Transaction.
My question is...
Can the BDC update the transaction for an unauthorized user.
If NO...What is the way to update the Transaction for this unauthorized user...
Thanks in Advance
Nanda

Hi Nanda,
Have you looked standard program RFBIDE00?
Please check program documentation perhaps it may help.
Regards,
Ferry Lianto

Help required URGENTLY regarding 9iASWE - logged in Username

Hi,
I have installed Oracle 9iASWE. I have been able to create services and access it through ptg/rm.
One of my service needs to access the username through which the user has logged in. I have tried creating the bind variable :_User as a input parameter in my service. But i have not been able to get the user name . Can anybody tell me how do i exactly get the user name.
Please reply if more details are required to get the solution.
Please reply ASAP.
email: [email protected]
regards.

Hi,
Thanks for the reply. But we are not using URL Adapter.
We are using a SQL Adapter and calling a stored procedure from it.
We are using the :_User variable to get the username, but cannot figure out a way to pass it from the SQL Adapter to the procedure.
Please help.
regards
Kamlesh

J2ME Help required (URGENT !!!)

Hello everyone,
Well I'm a newbie to this J2ME thing, I am working on a project right now which requires me to develop an application for my mobile phone Sony Ericsson W810i. This application accesses the on board camera and take images after every 1 sec and keep on saving the last 2 images in 2 different files or buffers. Once the images are obtained, Sobel Filter (Image processing) is applied on it for edge detection. Can anyone please help me with this all, I am really desperate and time is running out.
At the moment, I found this code on Sony Ericsson Developer forums which works perfectly fine with my W810i, the link to the code is as follows,
http://developer.sonyericsson.com/site/global/techsupport/tipstrickscode/java/p_java_0403.jsp
Well this takes one image and shows it on the canvas, however I am still trying to figure out a way to remove the question it asks whenever i press the button SNAPSHOT, it asks "Do u want to allow the application to access Camera?", is there a way to remove this as well. Please let me know.
Last thing, the getSnapshot is used as vc.getSnapshot(null), i read and changed it to vc.getSnapshot("encoding=jpeg");
This works fine with my mobile as well, but now i cant find any help on how to apply image processing on this encoded jpeg !!! Well please reply, as much as u know, u dun have to answer all the questions, any information regarding this is helpful, I'll be extremely grateful !!!
Thanks a lot,
Regards,
Mubin Khan

Hi mobeenkhan
You know, people are helping out voluntarily here. So it always helps to ask nicely. :-)
This is what you need to know (not really, since you probably won't use it)
A signed MIDlet may request higher access rights for specific actions by asking for them in the MIDlet-Permissions attribute of the MIDlet’s application descriptor.
The permission name for audio / video recording is:
javax.microedition.media.control.RecordControl
The permission name for camera snapshot is:
javax.microedition.media.control.VideoControl.getSnapshot
Try a Google search for "jad permissions midlet media camera".
And check whether, in your SE W810i, you can set the pernission for camera ( it may be called media access etc.) to 'Ask once per application' or something like that. This will be set from the File Manager (or Application manager, I haven't handled the W810i, only SE I've dealt with is the k700i), not when the app is running.
If your application isn't digitally signed, you probably won't be able to select a setting like 'Never Ask' -- and a digital signature can be fairly expensive, not something you might want to go for unless you're going to earn something out of marketing your products.
Be nice to everybody :-)
Darryl

Activation of update rule :Help Required Urgently!!

Similar Messages

Maybe you are looking for