Activation of Xcelsius Dashboard Business Content in BW

Hello Experts,
I'm attempting to install/activate Xcelsius Dashboard queries in BW such as [Human Capital Management Monitor: Organizational Data 1|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/98/cce7bd952a4c18b72ac06c3c393df7/content.htm] but not having any luck.
When going to RSA1 -> Business Content and attempting to select objects for XCLS queries, the system does not respond with anything.
I also can't open it directly from xcelsius.
Any tips from anyone who previously attempted installation of this type of BC?
Thanks

Make sure you have the right option selected in the "grouping" button of the BCT collection screen.
it can be set to:
- only necessary objects
- everything before
- everything after
- before and after
For your problem (if you selected the cube), you may have it set to "everything after"... so just before or only necessary would be better options
Also make sure that all the objects are marked for installation. (the checkbox behind them)

Similar Messages

Error while activating 0FIAR_O03 DSO from Business content

Hi,
While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
Thanks,
RAJ

Hi raj,
The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
do the following... try to activate the DSO once again ... you will get the message again
now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
Regards
KP

Problem in Installing/ Activating 0SD_C03 Infocube from Business Content

Hello Friends,
I am installing an InfoCube 0SD_C03 from Business Content in our BW Development environmant. I first installed "Only the Necessary Components". This took 3 hrs. AFterwards I picked "Before Option" and it kept running for 14 hrs, without completeing. In the last I stopped it to minimize the performance impact to anybody.
My question is, do you also face any such problem of installation running for hours and hours? How have you handled its resolution.
Finally, I broken my task into various component and I am installing component by component (e.g. Transfer Rule, Update Riles etc. etc.). But while doing so, human errors are possible and I may miss something. Also we would not like the same activation runs for hours in Production.. So there
Could you share some of your rich experience and possible resolution. Thanks for your help.
Gabeesh Mishra
[email protected]

Friends,
Necessary components took 2-3 hrs. I am running "before option" this weekend and will find out Monday. Running on weekend will not impact anybody.
I am communicating with Basis Team and they are aware of this problem.
In my previous organization, even Before Option will complete in 2 hrs (maximum). I guess there are multiple factors for jobs running so slow. Of course, I am following all rules of the Game!!
Thanks,

Activation of InfoObject in Business Content

Friends,
I tried to activate the InfoObject 0SALES_UNIT in the Business content and got a green signal stating that it is activated but i dont see it under the InfoObjects in AWB. Please suggest what possibly may be going wrong.
Thanks
Mike

I searched it using the InfoObject's technical name in AWB under InfoObjects but it does not figure there.
Thanks
Mike

Activating 0PUR_O01 DSO from Business Content

Hi,
Iam looking for more info around How to Activate the BC DSO 0PUR_O01.
Iam planning on Activating 0PUR_O01(Purchaing Line Items) DSO from the Business Content.
I read in help.sap that it sources data from 4 different Info Sources
2LIS_02_ITM: Purchase Order Items
2LIS_02_SGR: Allocation - Schedule Line with Goods Receipt
2LIS_02_CGR: Allocation - Confirmation with Goods Receipt
2LIS_02_SCN: Allocation Schedule Line with Confirmation
My questions are,
1.While activating the 2LIS_02_ITM Info Source,some of the objects like 0CM_CDT1 are coming up with a warning that the IO 0CM_HIEID is not added as attribute or Compounded(whil in reality it is present as compounded object)
2.Do I need to use the 3.5 Data source/Info Source or can I migrate to 7.0?
If I migrate to 7.0, then How do I convert the update rules & Routines which are collected during the collection of objects for the "Data Flow Before option)"
3.If I need only data required coming from 2LIS_02_ITM data source, can I simply activate only this Data source& DSO and keep loading the subset of data from this Data source?
4.Pls send me any documentation about this DSO/Data sources and How to use them/Activate them etc...
janjir ATTHERATE OF yahoo.com
Thanks
Jagadish

hi,
1.While activating the 2LIS_02_ITM Info Source,some of the objects like 0CM_CDT1 are coming up with a warning that the IO 0CM_HIEID is not added as attribute or Compounded(whil in reality it is present as compounded object)
if the object is found compounded and only warning messege, then u can ignore it
2.Do I need to use the 3.5 Data source/Info Source or can I migrate to 7.0?
If I migrate to 7.0, then How do I convert the update rules & Routines which are collected during the collection of objects for the "Data Flow Before option)"
that depends on ur requirement, at any point of time u can migrate to 7 data flow. but you have to create ur own transformations, u cannot migrate the update rule/transfer rules
3.If I need only data required coming from 2LIS_02_ITM data source, can I simply activate only this Data source& DSO and keep loading the subset of data from this Data source?
yes u can
4.Pls send me any documentation about this DSO/Data sources and How to use them/Activate them etc...
BI Content
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
All SAP related info
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
Ramesh

Error while activating process chains from Business Content

Hi All,
I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
1.Delta Upload : MTTR / MTBR (0PM_DELTA_P02)
2.Initialisation : MTTR / MTBR (0PM_INIT_P01 )
And they are failing with the error
"Object 0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
Message no. RS_EXCEPTION280"
"Message Text
Object 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
Technical Data
Message type__________ E (Error)
Message class_________ RS_EXCEPTION (Exception Messages)
Message number________ 280
Message variable 1____
Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
Message variable 3____
Message variable 4____ "
In the collected objects, these two infopacks are not present also.
Can you please let me know how to proceed?
Many Thanks in Advance,
Vineeth

Hi
Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
Check these links.
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
Chandu.
Edited by: Chandu on Jan 22, 2009 2:24 PM

Error in transfer structure while activating the business content

Hi all
we got the following error while activating the transfer rules( business content) :
1)error when determining a number from object BI_TSDTEL and number 01
2) object name can only contain characters from syntactical character set.
3) data element for infoobject WAERS 0CURRENCY could not be created.
can anyone please explain what is this error.

Hello Tilak,
Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
If the above doesn't fix then try the below
Goto SE14 -> Transfer Structure Name -> Adjust and activate .
This will fix if there is any inconsistency in the transfer structure.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Error during activation of business content

Hi
I am facing problems during the activation of the standard business content.
I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
infoobject XXX is not available in version A
Error when reading data target XXXX
Data source XX not mantained
Key figure XXX is not available in version D
In order to avoid activating pre-installed objects i have deselected them.
I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
thanks in advance!

Hi Everyone!
Thanks the responses have been encouraging and i do see a glimmer of hope
since i am fairly new at this I wanted to know
1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
thanks in advance!

Business Content, CCA - Incomplete Activation

Activated Cost Center Accounting Business Content of BW 3.3 without errors.
However, some objects are not available - in particular, 0COSTELMNT.
From RSA1 / Workbench, InfoObjects tab in Modeling, search does not find 0COSTELMNT.
However, RSA1 / Workbench, Source Systems tab in Modeling, after requesting Object OverView - 0COSTELMNT is reflected as activated. Also, from RSA1 / Workbench, InfoSources tab in Modeling for 0CO_OM_CCA_1, 0COSTELMNT is reflected in Transfer and Communication Structures. Furthermore, 0COSTELMNT can be drilled down into / opened for review.
Failure of 0COSTELMNT to completely activate prevents activation of other objects, including CCA_1 InfoCube.
Have attempted to re-activate total CCA Business Content in both foreground and background, without success.
Have attempted to re-activate 0COSTELMNT in both foreground and background without success.
Have attempted to force re-activation by specifically selecting Install option in Business Content - overriding Match status reflected, again without success.
Has anybody else encountered this or a similar problem ?
Any ideas how to achieve complete activation of InfoObject 0COSTELMNT, as well as related objects ?
THANKS.

Hi Lyle,
You are thanking a poster for his answer.
Please next time also give him points.
See: /people/mark.finnern/blog/2004/08/10/spread-the-love
This time I did it for you.
Remember: When you ask a question you also assume the responsibility to assign points.
Please check your other questions and if the answers were good.
Spread the love and give some points.
Thanks in advance, Mark.

Business content activation in fresh implementation

Dear gurus
Kindly excuse me if its an old cliched topic...I am new to implementation and i have been assigned to an end-to-end implementation project..my early work would be to know if standard business content available in BI will suffice our requirement or not....kindly guide as to how proceed from very beginning..what should i do first and yes since i will have to activate the entire flow in BI...how to go about it....i dont know what all ia should ask...kindly help with your suggestions..

Hi:
Please refer to the presentation by Jie Deng, "Presenting SAP NetWeaver Business Intelligence Content"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a017bf61-d61c-2a10-958e-ab18f4e92fbd?quicklink=index&overridelayout=true
Observe that is mandatory to install objects from the bottom up, so it is safer to activate small groups of objects, this way it is also easier to determine the causes of errors and make the appropriate corrections. Basically you need to install the objects in the sequence shown on slide 14.
- Extractor
- InfoObject
- InfoSource
- Transfer Rules (or Transformation Rules for Dataflows available in version 7.0).
- Update Rules (or Transformation Rules for Dataflows available in version 7.0).
- ODS
- Update Rules (or Transformation Rules for Dataflows available in version 7.0).
- InfoCubes
- MultiProviders
- etc, etc..
Also pay special attention to the Section 3 "Activation of SAP BW Business Content" (slides 85 - 107).
There's another presentation by Jie Deng that provides related information.
"Session ID: IM204 Guidelines for Implementing SAP NetWeaver BI Business Content in a Customer System"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ea3d3b-d61c-2a10-7b95-e6508f184aea?quicklink=index&overridelayout=true
Regards,
Francisco Milan.

Transfering 0CUSTOMER from R/3 and activating in Business Content

Hi all,
New to BW. Trying to learn Data Transfer. Need help activating infoobject 0CUSTOMER in Business Content. I transferred 0CUSTOMER from R/3 without any problem. When i try to activate it in Business Content I get the following errors:
1) Char. 0CITY is an navigational attrib. of 0vendor. Exclusive attrib not possible
2) InfoObject 0CITY being used in InfoCubes or ODS objects --> error:
3) Characteristic 0CURTYPE: The length has changed from 000003 to 000002
4) SID Table /BI0/SCURTYPE contains data: Characteristic 0CURTYPE cannot be activated @35\QLong text exists@
Any suggestions would be greatly appreciated.
Thanks,
Prabhu.

Prabhu,
The error messages you got are for those InfoObjects that are already activated, and whose active version is different from the business content version. When you are installing 0CUSTOMER, you need to be very careful as to NOT INSTALL those objects that are already active, unless you specifically want to.
in the BC scrren, Right click on the 0CUSTOMER, and select "remove optional objects". Then the system will not select the active objects for installation again. Even after you do this, expand 0CUSTOMER tree to the lowest level and see what objects are prompted for installation. And remove the check marks for those objects which are alrady active
1) Char. 0CITY is an navigational attrib. of 0vendor. Exclusive attrib not possible
0CITY has been modified and the flag "attribute only" has been removed from it. You are trying to install it again, which puts the flag back. But, since it is being used as a NAV attibute, you can not do that. hence the eror.
2) InfoObject 0CITY being used in InfoCubes or ODS objects --> error:
Same reason as above. When you mark something as 'attribute only' it can't be used in InfoCubes or ODS objects.
3) Characteristic 0CURTYPE: The length has changed from 000003 to 000002
0CURTYPE in active version is different from the business content version. You are trying to change that again.
4) SID Table /BI0/SCURTYPE contains data: Characteristic 0CURTYPE cannot be activated @35\QLong text exists@
same reason as above.
Good Luck
Gova

Comparing Business Content (D) with Active Content (A)

Hi, I am planning on installing some business content and notice that 0COMP_CODE is automatically marked for install and match.
How can I compare what I have in Active against the new business content to see what is different? Please don't tell me this is not possible...

Hi @ all,
i'm lookin for a way to compare my active BW structures with the existing content which is installed with SP or release update... I even want to see differences in startroutines or changes in transfer rules.
In my scenario, we used the DataSource 0UCCONTRACT_ATTR and the transfer rule from content.
The DataSource and the transfer rule were activated from content in 2003. In 2004, SAP published OSS note (713358) to correct inconsistent data.
But the new code wasn't activated, because we have many custom computations in the transfer rules.
Do you know any way to figure out those differences?
In SAP help, i found the transaction RSBICA (BI content analyzer). Is this the right tool?
Regards,
Philipp

Error In Business Content

Hi,
I am getting Errors in business content when Installing objects for Infocube. like
Object '0DBMKTC01' (CUBE) of type 'InfoCube' is not available in version 'D'
Object '0DB_MC01' (MPRO) of type 'MultiProvider' is not available in version 'D'
Object '0DB_VCDS1' (ODSO) of type 'DataStore Object' is not available in version 'D'
etc.......
Please help me
Regds
Dave.

Hi,
Apply note :1009329
Re: Error while activating Infocubes (0SD_C03) from Business Content
Re: Info Objects & Data source not active.
With rgds,
Anil Kumar Sharma .P

Business content infosource

Hi All,
How do I do a comparison between the active infosource (2LIS_03_BF) vs. the business content infosource, or just to view the business content info source. I am interested in both the communication structure and the transfer rule. The current active infosource in the system was from release 2.x prior ro our system upgrade to release 3.5. I need to implement the new 0IC_C03 inventory cube. The old 2LIS_03_BF infosource was customized to load a different info cube.
Any help will be greatly appreciated. I will assign points for those who are spending their time to help!!
Thank you.
Andrew

Ravi,
I looked at help.sap.com and did not find the fields for the communication structure and transfer rule for info source 2LIS_03_BF. Can you point me to the right direction?
Also, I was hoping that there are some SAP utilities where it would show the differences between the active version vs. the business content version for the infosource. Such as the one available in the info object display.
Thanks,
Andrew

Xcelsius or WebI Business Content

Hi Experts,
Is there business content available for Xcelsius dashboard and WebI ? Specifically, I am looking for contents in FI, SD, CO area that builds off existing SAP BW contents.
Thanks,
Paul

Hi -
As per my knowledge there is no BC available for WEBI/ Xcelsius. We need to build custom OLAP Universes, WEBi reports and Xcelsius DB's. Thanks!
Regards,
Anesh B

Activation of Xcelsius Dashboard Business Content in BW

Similar Messages

Maybe you are looking for