Activation page not clearing out

The activation page on my account online is stuck telling me I need to activate a phone I bought, activated and deactivated days ago. Customer service and tech service have been no help. Anyone here have any suggestions on who can resolve this issue?

wymi wrote:
4th Tech and they are telling me that's not necessary, the contracts been extended, terms met and so on. Now they are saying it's an online website glitch only. The account and phone are clear, give it time to clear out, heard all this before, we'll see wher it goes. I got the standard, "This happened to me to" from the last Tech, yeah right! Why not just tell me "We've never seen this before" or "We've got no other reports of this happening" line.
Because the other two excuses are used on Tuesdays and Thursday respectively!!! 
I just know I would feel like an idiot if I was to sell that phone (if that is what you are going to do) and the buyer can't activate it.

Similar Messages

  • BADI ME_PROCESS_PO_CUST - DOES NOT CLEAR OUT ERROR

    In ME21N I want to validate the field Commodity Code - STAWN. I have used the BADI ME_PROCESS_PO_CUST*
    . Have used get_foreign_trade() in the PROCESS_ITEM method . I am able to throw an error . It is doing it but*
    after throwing error then when we give a valid Commoditycode too it is still showing the error and not clearing the error  .*
    As suggested by Dean Q I used   INCLUDE mm_messages_mac,
    tried im_item->set_foreign_trade( ls_mepo_eipo)  still when a valid Commodity code is entered after an invalid one  it does not clear out the error. In fact on checking using break-point I found that the second time it does not enter into the method  PROCESS_ITEM.    Any help is welcome
    Nivedita

    Hi,
    In SE18 give ME_PROCESS_PO_CUST as the enhancement spot and display. At the left side of the screen you can see the badi definition ME_PROCESS_PO_CUST. Expand the tree and double click on implementations. You can see the enhance implementations created. Double click on the enhancement implementation and in that screen there is a check box 'Implementation is active' and field 'Effect in current client'.
    If you know the enhancement implementation name(not the badi implementation name), you can check it directly from se19.
    Regards,
    Poornima

  • Images on web page not clear

    Just got a MacBook Air, running 10.7.3 and noticing that on many web sites (firefox and safari are the same), the images just are not clear. They are a bit fuzzy, and some have some sort of weird border around them. I have attached a screen shot of the amazon home  page. Notice the weird gray area around the letters and images? Is there a setting or something that can make this better? Thanks.

    Your displayed image is fiairly clear with no major anomlies, other than what looks like either slight drop shadow and anti-aliasing.
    Upon closer inspection (close zoom), you see what looks like some compression and/or scaling artifacts.
    Take a look at these two images. The first one is with the artifacts present at high zoom. The second is with the artifacts removed.
    If this is what you are seeing, and it bothers you. there isn't much you can do. (it is the quality of the image from Amazon)
    If on the otherhand, this post doesn't make sense, and you see the same problem on both my images, have your MBA checked out at a Genius Bar.

  • DNSMaint not clearing out empty records

    NW65 SP8 .DNSmaint.nlm version is 1.0 2004. We are trying to get this
    process to work. all of the parameters are set correctly and the utility
    runs. there are no errors but also none of the empty records are clearing
    out. here is the command we are using. The user created for this process has
    full rights. The partition in question has a read / write.
    load
    dnsmaint -User:dnscleaner.ccps -PASSWORD:xxxx -ZoneList:.tt_calvertnet_k12_md_us.TechTrailer.CCPS
    load
    dnsmaint -User:dnscleaner.ccps -PASSWORD:xxxx -ZoneList:.21_10_IN-ADDR_ARPA.TechTrailer.CCPS

    CCPS,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • [Unsolved] iOS 8 Exchange Emails read on other devices do not clear out from Lock Screen

    Creating this thread again since the last one got marked 'solved' automatically although no solution was found.
    My Google Apps (Exchange) emails on the lock screen are not disappearing when I read them on other devices (eg. my iPad or Mac). On iOS 7 this used to work very consistently for me, that is, when I received an email on 3 devices and read it on one of them, the email would instantly be marked as read on the other devices and the notifications would be cleared out.
    Furthermore, if I slide the notification of a read email on the lock screen and delete it, it has no effect on the server. So this is certainly a bug.
    PS: Also tried Push email notifications with iCloud mail, same problem. For iCloud, even the icon badge count is not updated.

    Nope.  Mine is an iPhone 5 that has Exchange, Gmail and Hotmail accounts on it.  All three email clients worked perfectly on iOS 6 and 7 in terms of appearing on and disappearing from the lock screen, but my experience with iOS 8 has been horrible.  As to this issue in particular, not only are items not disappearing from the lock screen, but even when I changed the setting to show only 1 message on the lock screen (just so I would know if I have any new email), every email I get nevertheless still appears on the lock screen ?!?!  I agree with t87 that iOS has been a regression and, to my mind, a big one at that (not just limited to this issue).  The mantra of "it just works" does not hold true, at least in my experience.

  • Issue with Popup LOV field not clearing out "default" value

    I am using APEX 4.0 & Oracle 10g
    I have a form that displays a default value on a "Popup LOV" field (say P1_POPUP) when the Form is initially displayed to the user. The default value is part of the Popup LOV list of values. If the field is "manually cleared" *i.e. I clear the default value by backspacing and don't touch the LOV) and I Refresh (submit) the form (REFRESH button to display the same Form again), the default value is still displayed.  
    In Post Processing, I debugged the value of P1_POPUP to see if holds the default value and yes it does. I was expecting no value in P1_POPUP.
    Is this an APEX standard behavior?
    Any way how I can get rid of this value on an manually clearing action of this Pop Up field?
    Looking forward for your response.
    Thank very much in advance.
    Ed.

    I apologize, the default value was NULL indeed. However, it seems like I may need to manually clear this value so that it will not be displayed.

  • Can I make a new itunes account for my daughters ipod but not clear out my itunes

    We only have one computer now and I want my daughter to be able to use and upload to her computer without affecting my itunes music, what do I need to do? and can this be done?

    Create two Windows User profile, one for you and one for your daughter so that each of you will maintain your own itunes library and iTunes account.  You already have yours in the computer, you just need to add a new user profile for your daughter.  Go to Control Panel/Users to add a user account (make sure it is Administrator account and not Standard account).
    Refer to this article for info:
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495

  • After multi-mailbox search deleted the results are not cleared out of discovery mailbox?

    So my legal team has finally given me the OK to remove the results of a multi-mailbox search that the results of were sent to a discovery mailbox.   I've deleted the search, OK'd the warning indicating that the results of the search would be deleted
    from the mailbox and nothing further appears to have happened.  My expectation was that the results would be deleted.
    Anyway to troubleshoot this or do I just delete the discovery mailbox and start over with a new one?
    Jason Meyer

    Alternatively, you can also use
    Search-Mailbox cmdlet to delete items in the Discovery mailbox. To delete all items in the Discovery mailbox, use the cmdlet without any query parameters, or you can scope it to start/end dates, etc. See
    Search and Delete Messages.
    Bharat Suneja
    Microsoft Corporation
    blog: Exchangepedia.com
    Follow: @bsuneja
    This posting is provided "AS IS" with no warranties, and confers no rights.
    Please do not send email directly to this alias. This alias is for newsgroup purposes only.

  • Inbox-CPS not clearing out .wif files

    I just upgraded ZAM 7.5 to IR8 and ever since the update, the .wif files are
    just piling up in the inbox-cps folder. Has anyone else experienced this with
    IR8?

    Well, I was wrong, My server is just behind because it is rescanning every
    machine for a second time this cycle period after the upgrade. So it is
    currently scanning 118 machines right now.

  • RAM remaining active when not in use and grinding system to hault

    Hello there!
    The to point, my RAM appears to be acting very strangely and would be very grateful for any explanation/workaround/solution.
    I regularly use the RAM intensive application After Effects CS5. I have 16GB (8x2 GB matching pairs) of RAM which has worked fine for the past year or so until now. I usually tell After Effects not to render one frame at a time (no absurd multiprocessing requests) and to leave 6GB of ram free for other applications in its memory preferences. This used to stop AE from gobbling up too much RAM and slowing down the entire system. However, all of a sudden AE has started to disregard its memory settings and proceeds to use all of the available RAM until none is left. I then see my renders grind to a hault and the entire system move the speed of a snail as little to no free RAM remains.
    What is worse is that after I stop the render and quit After Effects, 8GB or so of ram remains active acccording to Activity Monitor, even though nothing is using it. I need to restart in order to get back to normal.
    I have tried all of the standard AE fixes, erasing preferences, cleaning caches, changing render settings, etc. I have also done all of the standard OS clean outs with Onxy, Disk Utility, etc. Nothing works.
    Below is a screen shot of my idle system with nothing open. The numbers do not add up!
    Below is a screenshot of what happens about 5 minutes into any render in AE, completely full RAM with with the Swap increasing with every pass.
    I realize that this is quite a specific question I should point at Adobe but I'm thinking it might be more of an OS issue as it has happened so suddenly for no apparent reason. No new type of render, no settings or updates applied lately, just completely out of the blue. Help much appreciated!
    I am running an Early 2008 8 Core Mac Pro, 8 GB of good ram in matching 2GB pairs. 4 fast internal drives. Mac OS 10.6.7

    The numbers don't add up as 6GB is shown as active in the pie chart while the amount of ram used by the processes list barely reaches 1GB. So what is using the remaining 5GB of active memory?
    I would not mind this so much if it was being used by some unseen system resource, and was made free if needed by other apps, but that is the problem. When I load more apps from this state the ram does not clear out and I see the computer struggling and writing page outs/ins even when the amount of ram being used in the list of prcesses is well below 16GB. The mystery process seems to remain active and does not release the ram.
    Hatter - I have gone through MANY threads about Adobe not releasing memory. I have been using AE for years and never and very aquainted with the best settings to use for rendering in accordance with available ram, processors, and fast drives. Many of them complain about inactive memory not being released and Apple's memory management. This is more of an oddity as until now everything has been fine. I am doing a render of the sort I have done hundreds of times in the past with this system.
    My problem is that this started happening all of a sudden for no apparent reason. AE allows one to control how much ram it uses and how much is left for other applications. I keep this at the Adobe forum suggested 6GB, and until a few days ago it would leave 6GB free. The render would progress smoothly, no need for page outs, no maxing of the ram. A simple render.
    Now the same simple renders max out all of the RAM despite my telling AE not to use it all. Changing the memory use settings seems to make no difference no difference at all and I gradually see the ram fill out to maximum and then the page in/outs go through the roof, the render taking 4-5 times as long as previous.
    So a bit stuck here! Do yall think I'll need to re-install my system to fix this or perhaps it might be more of a hardware problem? I am hesitant to wipe and re-install from a backup image so if any other possibly solutions come to mind please let me know...Possibly a hardware problem? =/
    Thanks for yout time!

  • Clearing out previous password history

    Hi everyone! As part of our User maintenance is to clear out old user password histories. Just want to ask if there's a way that i could clear out the old/previous password history of a user?
    Thank you very much in advance!
    Regards,
    Braille

    Wow - to get a response from The John Burton, I feel so honored!
    No, John, I believe that you are talking about when you are on the Account Identification Screen. I am talking about when you have confirmed the customer and are on the Interaction Record Screen and you realize that you want to exit without adding a record. By clicking on END, it exits but creates a blank interaction record. When I click on Cancel, the screen exits to the Home Page but when the user goes into the interaction record for the next customer, the details on the botton of the screen (Last Interactions) is from the previous customer. It is as the Cancel does not clear out the previous information.
    Thanks for your time,
    Simon

  • FXTrans Script does not clear previously translated currencies

    Good morning Experts!
    On Page 4 of the Document named "How to Configure Limited Currency
    Translation" that was provided to me by SAP Support, with regards to the FXTrans Script, it states "The
    translation process first determines what rates and currencies need to
    be processed. It then clears any previous data that was generated by
    earlier FXTrans processes for the same category and time scope as the
    current run."
    This is broken. The MultiCurrencyTranslation process is not clearing
    out previous data at all. It's simply appending additional data each
    time the process is run.  Has anyone else seen this issue?  I've run the process numerous times and our European revenue has doubled and tripled and quadrupled. 
    Is there a way to resolve this?
    Any ideas are greatly appreciated.
    Thanks!
    Sean

    Sean,
    There is simple solution.
    You can use  CLEAR DESTINATION statement in the logic script.
    As you know, this will clear destination so you should be careful to use this but it will clear destination and will write data.
    I think it will solve your issue.
    Thank you.
    James Lim

  • FX-restatement package clears out our special translation

    Hi,
    We have created a special FX-Translation for an account and we do not want the regular FX-Translation to convert the Loc figures into Swedish currency (SEK is the group currency). First we tried to set the ratetype to notrans for that account, but then when we run run the FX-logic file: *RUN_STORED_PROCEDURE=SPRUNCONVERSION([%APP%],[%CATEGORY_SET%,[SEK],[GLOBAL],[%SCOPETABLE%],[%LOGTABLE%]
    the FX-restatement package had cleared out special translation. We then tried to remove the ratetype setting from notrans to nothing, but then it just translates the same amount in LOC to sek e.g. 10 in local currency gives 10 in SEK.
    Does anybody have an idea about how to leave out this account from the FX-translation without it being cleared out or the same as the Loc value?
    Best regards
    Robert

    I'm not sure if there's a way to force the SPRUNCONVERT to not clear out your custom calc result, but maybe that's still OK. I think the SP does something behind the scenes that's similar to a
    *Clear_Destination
    *Destination RptCurrency = SEK
    and there's no way to turn this off. I faced a similar issue with the SPRUNCONSO SP, and gave up trying to fight it.
    Set the RateType=NoTrans, let it clear out the value, and then after that finishes (you probably need a *COMMIT between these blocks of code), calculate this one account using your custom logic. As long as you get the correct result, the extra overhead of the unnecessary clearing is minimal.

  • How do I highlight text in the new Pages?  It's not clear.

    I have the new version of Pages.  And it appears that highlighting of text is an issue.  This is a basic function.
    I found there is one quick key version, but doesn't clearly explain how to change highlighting colours.  How to get into it.
    I have to explain this to my 80 year old mom, who we told to get a Mac because it was easier!
    So if anyone has it laid out step 1, 2, 3, that would be helpful, because it's not clear to me either.
    Thanks!
    Apple - please to a quick fix for this one, it should be the same as changing the size or the font or like bold or italic.  Simple, clear, fast and doable..... for anyone!

    TO Peter,
    Thanks for the list. I had found it in LibreOffice, tucked away in the Background tab of the Character pane opened by the Character... menu item in the Format menu, and named "Background Color. A few steps further down than in Pages. Apache OpenOffice has it in the same place. But both also have a hilight icon in the toolbar.
    I didn't fin highlighting or Color fill in Text Edit (v1.8). Might need a further search.
    But this well-equipped party of (one) oscurantist did find a shorter path to highlighting text in Pages '09, cleverly hidden in plain view! See the image below.
    TO hscortez,
    I'm aware that changing the text colour is not highlighting.
    But YeOldMacFan pointed out how to change text colour AND how to change background colour of text, using Character fill, found in the Advanced Options (Pages 5) or the More (Pages '09) tab of the Text Inspector.
    Character Fill fills the space around the character with the chosen colour. As shown above, it's essentially the same effect as dragging a hiliter pen along a line of printed text.
    Unfortunately, whats shown above is the Character fill well on the format bar of Pages '09—right out in the open like the highlighter pen button in LibreOffice, and presumeably in MS Word. I don't have Pages 5 (avoiding it until a few more of the missing features arrive), but I do note that Pages for iOS offers highlight as one of the options in the contextual menu that appears when a block of text is selcted.
    The process appears to be:
    tap twice to select some text.
    drag the handles at each end of the selection to adjust what's selected.
    tap Highlight in the menu that has appeared on the screen.
    One thing missing appears to be colour choice. The default is a 'hiliter yellow'. I didn't see a way to select a different colour.
    "Hopefully, this will make it on their upgrade list. "
    Hope is good, but taking action is useful.
    Pages menu > Provide Pages Feedback > Make your request that this be added to Pages 5. Requests made through Provide ...Feedback go directly to Apple. Comments and questions here are read by users like yourself, and we don't have the ability to change the way the apps work. Not directly,anyway.
    Regards,
    Barry

  • Navigation menu active page color not behaving as it should

    I created an unordered list for the mainnav links. I use the following lines in the code:
    <li><a href="../index.html" class="thispage">Home</a></li>
            <li><a href="#">Events</a></li>
            <li><a href="#">Music</a></li>
            <li><a href="#">Agenda</a></li>
            <li><a href="../Pages/artists.html">Artists</a></li>
    The Home button shows the color for 'active', but if I go to the artists page it first shows the hover color, then the page opens but does not show the active color.... I.o.w. the Home button stays on active though it is not active.
    Please see the effect on my testsite: www.adrianrooymans.nl

    armona22 wrote:
    I'm sorry, but I tried that already, and it does not solve the problem. If I do that I get TWO active pages, but clicking anywhere on the artists page makes the blue color go away, except for the Home button.... I could temporarily put that on the testserver so that you could see what happens (unless you beleive me).
    You will get two active menu items unless the class is removed from the links that you don't want it on.
    If you look at the example page code in the 'completed' folder of the Bayside Beat tutorial you will see on the 'index' page the class has been added to the 'index' link:
    <nav id="mainnav">
          <ul>
            <li><a href="index.html" class="thispage">Home</a></li>
            <li><a href="sightseeing.html">Sightseeing</a></li>
            <li><a href="#">Eating Out</a></li>
            <li><a href="#">What's On</a></li>
            <li><a href="#">Where to Stay</a></li>
          </ul>
        </nav>
    Whilst on the 'sightseeing' page the class has been moved to the 'sightseeing' link:
    <nav id="mainnav">
            <ul>
                <li><a href="index.html">Home</a></li>
                <li><a href="sightseeing.html" class="thispage">Sightseeing</a></li>
                <li><a href="#">Eating Out</a></li>
                <li><a href="#">What's On</a></li>
                <li><a href="#">Where to Stay</a></li>
            </ul>
        </nav>

Maybe you are looking for