Activation problem on Vision Update from 7.1 to 8.0

Having reinstalled Labview and Vision software, the activation code I had does not work. The problem is around the fact that
Vision 8 gives an update for NiMaq 1394 for IEEE 1394 to version 2.0.2, I am unable to present an appropriate activation code.

Hello,
I have been
looking into the problem you are having and there appears to be a lot of things
suggesting that there is a great dependency on the previous versions of
software you have installed. Did you have a version of NIMAQ 1394 for IEEE 1394
installed before you upgraded Vision? If so which version was this?
I have been looking at this KB on the issues with NIMAQ for
IEEE 1394 installation. Take a look at it and see what versions you have and if
any of it applies to you.
Let me know how you get on.
LeeM
AE NIUK

Similar Messages

T61P died, 1 long beep - 2 short beeps problem - Do the updates from Lenovo KILL our laptop?

Hi all
I bought T61P from 2 years ago, everything is ok until yesterday, I turn on my laptop and nothing display on the screen, and with this : 1 long beep - 2 short beeps....
I make some search, and found a lot of people have the same problem, and almost happend from September - 2009 to now.
I asked my self why this problem does not happend in the 1st year of using T61P...and this only happend from September - 2009 to now? DO THE UPDATES FROM LENOVO KILL OUR LAPTOP?
My laptop is out of warranty, and I hate to replace another mainboard.... If I must do it, I will throw my laptop to the Trash, and never buy another Lenovo laptops.

so far it looks like a strict hardware problem, not related to updates. however, some manufacturers try to "cheat" with bios updates - they make fan to run at higher speed lowering the mainboard temp. This does not solve the problem per se, it just makes laptop survive beyond warranty expiration date, so you, dear customer, will have to foot the bill.

Problem with os update from 4.3 to 4.5 on Curve 8330 Verizon

Performed os update from 4.3 to 4.5 through "check for Updates" on blackberry's site. checked box to have information backed up while updating and then restored after. during update there was an error and the restore did not take, but phone was wiped. when I reinstalled update it did not give me the option to restore. I have .cod files saved on computer from the update but I need to restore my contacts, calendar etc. is there any way to do this?

Hello,
Yup...the backup process would have created an IPD file. Search your hard drive for a file with extension of IPD (*.IPD). Inspect the results...the file created at the time you were doing this is the file you need to use a restore source.
If you are using the RIM software through 5.0.1, see this KB.
If you are using desktop software 6.0, then see this KB.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I'm having problems getting my updates from the App Store. Nothing is showing up.

I can't get my updates from the App Store . The screen is completely blank . Anyone have a solution ?

The update server is down; try this temporary workaround
App Store>Purchased>Select "All"
Note: Look out for apps that have the word "Update"
http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

Data upload problem in delta update from 1st ODS to 2nd ODS

Dear Friends,
I am loading data from one ODS to another. The update mode was full upload. Sometime back an error occurred in activation of the first ODS. The error was: Full updates already available in ODS ,Cannot update init./delta. So currently daily records are pulled but not added i.e. transferred recs = 4000 but added recs = 0.
When I looked for a solution in SDN I found that using program RSSM_SET_REPAIR_FULL_FLAG for 2nd ODS will reset all full uploads to Repair Full Request which I have already done for 2nd ODS. Then initialize once and pull delta.
But problem is that I cannot set update mode to delta as I am pulling some 80,000 records in 2nd ODS from 1st ODS with around 14 lacs records daily based on some data-selection filters in infopkg. But do not see any parameters for data-selction in delta mode.
Please suggest.
Regards,
Amit Srivastava

Dear Sirs,
Due to this error in activation in 2nd ODS daily data upload is failing in 1st ODS.
To correct this I converted all full upload requests in 2nd ODS to Repair full requests.
But now when I scheduled the infopkg today with full upload again data was transferred but not added.
I know I cannot have init./ delta so what possibly can now be done in this scenario. Please help.
Regards,
Amit Srivastava

Problem with automatic update from websites

We want to show several websites in our keynote presentation. In the keynote description we found, that websites will be updated when the program opened or when the presentation started.
Sometimes (infrequently or when the presentation is started the next day) our websites are updated automatically, but sometimes it doesn't work.
Thanks for every answers !

From what I can gather with other comments I've read over the months, it would seem that the web page update is flaky at best. Wish I had a better answer, maybe someone else has heard of a fix.

Table activation problem after deleting ariw from table

Hi,
I have inserted a new field(xxxx) into custom table and activated it..
But ,when i tried to enter values for this new field in se16,this field doesnt exist there.But in se11 i was able to view..
So i deleted that field from tht table and inserted again,,
Now iam geting message that
xxxx field was deleted
Alter table is not possible..
Diagnosis shows that
The structure of the table changed at field level. This change requires a conversion of the table. This situation can occur for example if the data type or field length of the domain upon which the field is based was changed. A conversion is also generally necessary if the key of the table changed.
Procedure
Convert the table using the Database Utility (SE14).
Can you people let me know how i can cahge the table ..
Regards
parnith..

Hi Parnith,
Suppose you have entered a new field (or deleted a field) in your table in SE11(and table already contains data).
Now, your next step should be activating that table first.
For that :
1. Just click on save.
2. Goto Utilities -> Database Utility.
Click on that.
3. Click on Activate and Adjust database.
Now you will see your field added to your table.
Now you can simply Goto contents of the table and modify the records and fill the newly added field for each record.
Hope it helps.
Regards
Hemant Khemani
Edited by: Hemant Khemani on Apr 25, 2008 10:09 AM

Problem with Notification update from backend (local notif)

Hi all
I created a Local notification and uploaded the same to the server. I found the same notification in the backend and made some changes to it and then tried to sync the data to the MAM application but I got the following error message
Exception while proccessing method SMARTSYNC : java.lang.RuntimeException: Error while Smart Sync inbound processing: java.lang.IllegalStateException: State NEW_INSYNC does not allow this transition: srvMod
Any solution or suggestion would be helpful
Thanks
Gopi

Hi Gopi,
Looks like a problem in the middleware. Can you check in merep_mon what the server is sending to the client for that particular notification?
It should ideally be a success message along with a Replace.
But I fear that it may be sending a modify message. Can you confirm this?
Also the latest SP is SP18 do you have any plans to upgrade?
Best Regards,
Karthik

HT4623 i had a problem when i update iphone 3gs from ios 5.1.1 to 6.1. How could i fix it?

i had a problem when i update iphone 3gs from ios 5.1.1 to 6.1. How could i fix it?. I can active my phone?help me, please!

Well we need to know what your problem is if you want someone to offer a solution for you

Performance problems after Update from 7.6.00.37 to 7.6.03.15

Hi,
after the Update from 7.6.00.37 to 7.6.03.15 in our live system we noticed a lot of performance problems. We have tested the new version before on our test system, but there don't noticed effects like this.
We have 2 identical systems (Opteron 64 bit, openSuse 10.2) with log shipping between them. We updated first the standby system, switched from online to standby (with copy of cold log) and started the new server as online system. After that we run a complete backup (runtime: 1 hour) for starting a new backup history and for activating autolog. Then
With the update we changed USE_OPEN_DIRECT to YES, but the performance of the system was very slow afterwards. After the backup it remains at a high load average (> 10, previous system had about 2-4), with nearly 100% of CPU usage for the db kernel process.
Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but periodically rises up to a load average of 6 and slow down the performance of various applications (somebody says about 10 times slower). Here we also noticed a high usage (now 200-300%) of the db kernel process.
Our questions are:
1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
2. Are there any other (new) parameters, which can help? Maybe reducing MAXCPU from 4 to 3 for reserving capacities for the system (there is only one maxdb instance running)?
3. Is the a possibility to switch back to 7.6.00.37 (only for worst case)?
I have made some first steps with x_cons, but don't see any anomalies on the first look.
Regards,
Thomas

Thomas Schulz wrote:>
> > > Next day we switched USE_OPEN_DIRECT back to NO. The system first runs better, but
> >
> > What is it about this parameter that lets you think it may be the cause for your problems?
> After changing it back to NO, the system runs better (lower load average) than with YES (but much slower than with old version!)
Hmm... that is really odd. When using USE_OPEN_DIRECT there is actually less work to do for he operating system.
> > > Our questions are
> > >
> > > 1. Has something basically changed from 7.6.00.37 to 7.6.03.15, so that our various applications (JDBC, ODBC and Perl/SQLDBC partially on old linux systems with drivers from 7.5.00.23) don't reach same performance as before?
> >
> > Yes - of course. Changes are what Patches are all about!
>
> Are there any known problems with updating from 7.6.00.37 to 7.6.03.15?
Well of course there are bugs that have been found inbetween the release of both versions, but I am not aware of something like the performance killer.
We will have to check this in detail here.
> > > I have made some first steps with x_cons, but don't see any anomalies on the first look.
> >
> > Ok, looking into what the system does when it uses CPU is a first good step.
> > But what would be "anomalies" to you?
>
> Good question! I don't really know.
Well - then I guess 'looking at the system' won't bring you far...
> > Do you use DBAnalyzer? If not -> activate it!
> > Does it gives you any warnings?
> > What about TIME_MEASUREMENT? Is it activated on the system? If not -> activate it!
>
> OK, that will be our next steps.
Great - let's see the warnings you get.
Let us also see the DB Parameters you set.
> > What parameters have changed due to the patch installations (check the parameter history file)?
> >
> > What queries take longer now? What is the execution plan of them?
>
> It seems to happen for all selects on tables with a lot of rows (>10.000, partially without indexes because automatically generated). With the old version we had no problems with missing indexes or the general performance. Unfortunatly it is very difficult to extract some sql statements out of the JBoss applications. But even simple queries (without any join) runs slower, when the load average rises over 4-5.
Hmm... the question here is still, if the execution plans are good enough to meet your expectations.
E.g. for tables that you access via the primary key it actually doesn't matter how many rows a table has (not for MaxDB at least).
> > BTW: how exactly do the tests look like that you've done on the testsystem?
> Usage over 6 weeks with our JDBC development environment (JBoss), backup and restore with various combinations of USE_OPEN_DIRECT and USE_OPEN_DIRECT_FOR_BACKUP.
Sounds like the I/O is your most suspect aspect for overall system performance...
> > Was the testsystem a 1:1 copy of the productive machine before the upgrade test?
> No - smaller hardware (32 bit), only 20% of data of the live system, few db users and applications.
>
> > How did you test the system performance with multiple parallel users?
> Only while permanent development with the 2-3 developers and some parallel tests of backup/restore. Unfortunately no tests with many users/applications.
Ok - so this is next to no testing at all when it comes to performance.
> An UPDATE STATISTICS over all db users seems to change nothing. At the moment the system remains markedly slow and we are searching for reasons and solutions. Another attempt will be the change of MAXCPU from 4 to 3.
Why do you want to do that? Have you observed any threads that don't get a CPU because all 4 cores are used by the MaxDB kernel?
regards,
Lars

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

You've logged into your account and viewed your purchase history and there aren't any error messages shown (e.g. 'problem with a previous purchase'), and you haven't got any purchases due (e.g. pre-orders and/or subscriptions) : Why can’t I select None when I edit my Apple ID payment information ?

HT204152 I am unable to update my App store Updations. the reason being billing problem asking to update payment method.many times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc.

I am unable to update my App store Updations. the reason being billing problem asking to update payment method.Many a times i updated my credit card details but refusing from the system .how can i update my app store updations like Face book etc....Using ! phone 6plus .IOS8.3

What do you mean by 'refusing from the system', if you are getting an error message then what does it say ?
For a credit card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are. If it is and if you are getting a 'declined' message then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes Support (these are user-to-user forums) and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If when trying to download you are getting a message about a 'problem with a previous purchase' then that implies that iTunes wasn't able to collect the money for your last purchase. If that is the case then you won't be able to download anything else (including app updates) until you've paid off what you owe : Pay an unpaid balance in the iTunes Store - Apple Support
If you aren't getting the 'problem with a previous purchase' message then try logging into your account (not when trying to download something) and see if you get the 'none' option so that you can remove the card's details and be able to download updates to your apps : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support

Problem in provisioning user from oim to active directory using ssl

hi,
problem in provisioning user from oim to active directory using ssl i am getting following error while provisioning user to AD.
15:18:12,984 ERROR [ADCS] Communication Errorsimple bind failed: 172.16.30.35:636
15:18:12,984 ERROR [ADCS] The error occured in tcADUtilLDAPController::connectTo
AvailableAD():simple bind failed: 172.16.30.35:636
15:18:13,015 ERROR [SERVER] Class/Method: tcProperties/tcProperties encounter so
me problems: Must set a query before executing
com.thortech.xl.dataaccess.tcDataSetException: Must set a query before executing
at com.thortech.xl.dataaccess.tcDataSet.checkExecute(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.util.tcProperties.<init>(Unknown Source)
at com.thortech.xl.dataobj.util.tcProperties.initialize(Unknown Source)
at Thor.API.tcUtilityFactory.getLocalUtility(Unknown Source)
at Thor.API.tcUtilityFactory.getUtility(Unknown Source)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.co
nnectToAvailableNextAD(Unknown Source)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.se
archResultPageEnum(Unknown Source)
at com.thortech.xl.schedule.tasks.ADLookupRecon.performReconciliation(Un
known Source)
at com.thortech.xl.schedule.tasks.ADLookupReconTask.execute(Unknown Sour
ce)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionActi
on.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown S
ource)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
can any one help.
Thanks and Regards,
praveen,

Are you able to connect to AD over SSL through some LDAP Browser ?
Check the validity of Certificate ?
Does your certificate appear in the list ?

After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

Do you have a bootable clone from prior to the update? If so, roll back with that.
Are your apps that won't open PPC and do they need Rosetta? Do you need to activate Rosetta?
Have you considered reinstalling 10.6 from your install disc and then coming forward with the 10.6.8 Combo Updater, then doing software update and not including whatever it was you installed that caused this propblem?
By the way - what update was it that caused this problem?

Activation problem on Vision Update from 7.1 to 8.0

Similar Messages

Maybe you are looking for