Activation problem with lenovo miix 2

Hi
I get license expire error on my miix 2 tablet
What is the problem? Should you please help me?

I try it in both of my laptops and they do the same. Ι don't think there is a way to fix it.
Lenovo ThinkPad X1 & Yoga 2 13

Similar Messages

Strange problem with Lenovo S650

I have an interesting problem with Lenovo S650.
If it stay in 2G/3G mode - it connect and work in 3G network well. But if I put "only 3G" mode, it don't connect to the 3G network.
I changed SIM-cards, modems, firmware, mobile operators - Nothing change.
What is the problem? Thank you.

Because your network needs both 2G and 3G to establish an internet connection. When the signal is low ,3G is favored/preferred (WCDMA Preferred or Auto )...but that uses more power. Don't actually need 3G all the time.
This isn't the root of your problem ...Actually isn't a problem at all .
Now can you tell me your firmware build number(Settings>About phone.. ) ?
Did you had this problem from day 1?
Did you get the phone from China and flashed the ROW firmware yourself? Got the firmware from some Russian forum and changed some regional code at the first boot...by any chance?
Beside flashing different baseband modems, have made other alterations (Like changing engineering mode settings... )
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Activation problems with ipad 2 wifi gsm

i have been having activation problems with ipad 2 ever since it was launched in sptemeber 2013. its gets stuck on server busy try later or try using itunes. even with itunes it does not activate. went to a apple reseller. he tried updating it through some DFU mode but did not go through. now he says that the ipad will have to be sent to US for repairs. any help or advise from the users ? thanks

I have the same problem.I hope somone comes up with a solution or it is fixed in the ios 7.1 update

Activation problems with iPhone 5

Has anyone had activation problems with iPhone 5 today?? is there any kind of trouble with itunes and wireless activation??

I have unlocked and used iphone 5's before. Never had this problem.
When I put my tmobile SIM in it;ll say no service then go back to the actviation screen after saying "activation required"

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Problem with lenovo t60 and the vga output

I have a problem with the vga output and the lenovo t60
When i put the videoprojector connector in to the lenovo t 60, the projector reponde is:
Not supported
H: 48.20khz v: 143,10 hz
On my desktop pc the projector function on 1024x768 resolution and the 60 hz to refresh.
The same configurations are on my laptop and the projector doesn't function
Please help me.

I too have this problem. My T61 worked fine for about a year, and then suddenly would no longer project. I had made no changes to the settings for the external display, though since the problem started I've tried many combinations without success. Typically the projector reports that the frequency settings the laptop is sending are unsupported. In my case the vertical rate is usually correct (60 Hz) but the horizontal rate varies wildly.
I suspect a hardware problem, as this post suggests: http://www.edugeek.net/forums/av-multimedia-related/32128-laptop-wont-display-projector.html. (Note the message claiming that 6 out of 40 Lenovo laptops exhibited this problem.)
Since my system is still under warranty I guess I'll have to get it repaired, but I'd rather hear of a software fix...

Activation problem with Photoshop CS (bought in 2003)

I'm using Photoshop CS (bought in 2003) and Windows 7. Since there was some problem with Windows, it has performed a recovery process. After the recovery, Photoshop requires me to activate the software thru internet which is not working. Please help. Thankyou!

The activation servers for versions CS2 and earlier have been permanently taken offline. You cannot activate these products.
In exchange Adobe has supplied a non-activation version of CS2 for legitimate owners of those products. See the the link below. Download the appropriate application. Use the key supplied on the web page, and follow all other instructions.
CS2 and prior
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
--OB

Screen display problem with Lenovo 3000 N100

Hi,
My Lenovo laptop is having a problem with screen display. When i boot the laptop (keeping the screen at 90 degrees to the key board) , there is no display . However, when i tilt it down (lesser than 45 degrees) the display comes back to normal.
In addition, the mystery is that this doesnt happen if do the same after 5 minutes. No matter at what position i have the screen, it works perfect!
Is there a solution for this ? Can some one explain why the display is normal after warming up, but not in the begining (booting) stage.
Senthil.

Lose / pinched wires possibly.
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-63486upper
I had to re-seat mine , and I still have to wiggle the upper right corner .
A common issue I here,although I just purchased a second used N100 and the screen has no issures.

BIG PROBLEM with Lenovo A320 wifi - extremly slow

Hello Lenovo community,
I have a big problem with my lenovo A320 all in one.
The wifi connection is extremly slow. I have 3 differen devices at the same place one macbook, one phone and my lenovo a 320 connectet to the same wifi. The macbook and phone get about 50mpbs but my lenovo gets only about 0.3 to 2 mbps. I have tested it wit different networks and differnet routers but is always very very slow.
When connected via LAN works fast and well but via wifi its useless.
I have the intel core I3 and Broadcom 802.11n with the newest drviers.
I have tried everything possible but nowthing helped.
Can you please help me with any solution ?
Thank you in forward

Thats great news for you.. it probally is a defect on my phone, I purchased it new from apple and tommorrow its going in for service..
I have seen others with similar issues, must be a bacth, I even heard that there are 2 wifi antenas that were used on them, one of them gives problems the other not...
Just a shame, its a great phone
thanks for all the feedback

Activation problem with Acrobat V7 on Windows Vista

I recently purchased a new computer with Windows Vista Home Edition pre-loaded. I then installed my Acrobat Version 7 software which had been installed and operating trouble-free on my old Windows XP machine. Everything seemed to install OK but then when I tried to use the software an automatic pop-up appeared saying I could not activate the product because I was not logged on as the Administrator. When I check my user identity in Vista I am logged on as the Administrator and I am the only user.
When I then tried to activate by phone the Adobe individual was clueless as to what the problem was except to say there are compatibility problems with V7 & Vista and suggesting I hand over another $99 to upgrade to V9 - something I am not enthused about since I already paid $299 only 2 years ago.
Suggestions?

Vista requires AA8.1 at a minimum. I think that a few have gotten AA7 to work, but it is not supported by Adobe on VISTA. I know that is not good news, but it may be that you will be unsuccessful. At the very least, expect to have to print to file and open distiller to complete the conversion. I think that AcroTray is one of the major problems with the use on VISTA.
Hopefully someone might stop by that has successfully gotten over the registration problem you are having, and possibly gotten AA7 to work in some sense on VISTA, but do not be surprised if there are no takers. Good luck.

Activation Problems with new Razor

My original razor is worn out and limping on it's broke leg and my last nerve. I bought a Motorola K1m KRZR off eBay to activate while I'm still under my upgrade time.
I went to the Verizon wireless web site, logged in, put the new phones ESN in and it accepted the info. Turned old one off and new one on and dialed *228. Nothing, nothing, nothing but failures to activate. Called 800-992-0204 only it's after 11 so, nothing but voice prompts telling me to do the same thing the web site told me to do. So, I went back to the web site and this time instead of the ESN I put the MEID. The web form looks like it want's both with a / between them but there isn't enough characters in the form to fit it all. So I submitted only the MEID. Same results. Web site accepted the number and said turn the old one off and active new phone with *228. Nothing, nothing, nothing but more failures to activate.
Has any else had this problem during activation? If so, what did you do? Wait to talk to a Rep. during normal business hours? They should have a tech team there 24/7. Of course if they did that I'd be talking to someone in India who I can't understand. I can fake a great Indian accent but I can't understand one.
Help.

Hi,
One possibility could be that the phone is on a Lost/Stolen list, or a NonPay list, this would prevent the activation from completing. This can happen especially when buying from a third party.
Usually when you see both an ESN and MEID you'll want to use the MEID. Only enter in the numbers, no extra symbols. So it sounds like you definitely did it correctly. It's most likely something in the billing system that's preventing it.
Do you have any pending orders for a plan or feature change?
When calling *228 do you maintain at least 2-4 bars of signal?
Otherwise, you can call Tech support, but they usually don't change phones unless it's an emergency. I guess it would vary by case. And you would most certainly NOT speak to anyone in India. VZW does not outsource their calls outside of the country. You may get someone of a different ethnicity, but they won't be outside the country. =)
Good luck!

ODS Activation Problem (with SIDS) BIG PROBLEM !!!

Hi
Ok we have a situation in our project but first a few facts: -
1: For ODS we do not use keys but have a infobject that creates a unique ID for each entry with a bit of ABAP in the update rule (yep not very good I know but too many to change now)
2: The SID table keeps growing so we have deleted it four or five times with SE14.
Now I am not sure if these are related to our problem as we have used SE14 before and it hasnt created prolems??
THE PROBLEM
Some of th ODS that use this unique Info Object (we will call this A1) that creates unique entries will not activate with SID creation. It doesn't give much information apart from whatever process A1 is it is returned with errors.
We get the following message
Process 000034 returned with errors (process 34 is the one that tries to get a SID for A1)
Message no. RSODSO_PROCESSING006
Activation of M records from DataStore object CA_TS1 terminated
We also geta short dump every time too and that is copied below the line where it fails
Does anyone know of how i can reset the SID gerenration or anythign that may help
52           ID 'KEY' FIELD 'BI0'
53           ID 'DATA' FIELD l_field.
54
55
56   IF i_abend EQ rs_c_false.
57 *... Nachricht an den Message-Handler schicken
58
59     DATA: l_type TYPE smesg-msgty.
60
61 *... S-Meldung wenn kein Handler initialisiert
62     IF g_active IS INITIAL.
63       l_type = 'S'.
64     ELSE.
65       l_type = 'W'.
66     ENDIF.
67
68     CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
69       EXPORTING
70         i_class = 'BRAIN'
71         i_type   = l_type
72         i_number = '299'
73         i_msgv1 = i_program
74         i_msgv2 = i_text.
75   ELSE.
76     DATA: l_text TYPE string,
77           l_repid TYPE syrepid.
78
79     l_repid = i_program.
80     l_text = i_text.
81
>>     RAISE EXCEPTION TYPE cx_rsr_x_message
83           EXPORTING text = l_text
84                  program = l_repid.
85   ENDIF.
86
87 ENDFUNCTION.

Yep right click and delete data then set up new initial etc with very small selection.
Reloaded and exact same error message.
when I check the /BI0/SBBP_OBGUID table it only has one entry whilst the other infoobjects are getting filled in their SID tables so is there any way to sort of kick this table up the butt and reset it or something??
Your right about the P table so we can cross that out of the picture )
I do think it is somethign to do with the fact that we have used SE14 too many times and it hascaused in consistencies but if you have any ideas how to resync it or somethign it would be great
thanks

Activation problems with CS3 and PS6

I own CS3 standard edition for Windows. Recently I upgraded Photoshop only to CS6.
All works well with PS/CS6. However, when I go back to use CS3 applications, the programs won't run. In Acrobat - the program I'm trying to run now - I get the error "Adobe Acrobat 8.1.3 cannot be launched..." and am told to open another CS3 program. I tried that, only to be told my CS3 is no longer registered.
I got out the CS3 disks, entered the serial number, and am now told I have too many activations. This makes no sense at all, as I just removed CS3 from my laptop.
Can someone tell me how I can run my CS3 programs with PS/CS6? I cannot afford to update the whole suite; that's just not an option.
Thanks,
Ed B

Hi Ed B,
First, if I understand your initial question, you have two fully purchased licensed Adobe products: CS3 Standard and PS6. Second, you had CS3 installed on your desktop and laptop…within Adobe is licensing agreement. Third, when you began to experiencing problems, you uninstalled CS3 from your laptop and proceeded to reregister CS3 on your desktop—I can help you with that.
If you did not “deactivate” CS3 on your laptop prior to its uninstallation, it’s still showing as one of your two permissible registrations. I ran into the same issue with CS5.5 after a rebuild. I had to call Adobe licensing division and tell them what I did; they corrected my error on their part and I was good to go. For future uninstalls:
fire up any CS3 app
click the Help button on the main menu
select “Deactivate”
then uninstall your product.
Now, as to PS3 and PS6 being on the same system…there’s no problem. Just make sure that PS6 has its own/correct license number. To check this is the same method as when you deactivate:
Open PS6
click Help button
select Activate and make sure the code displayed is correct, or put in the new product code.
After that, you should be good to go.
Hope this helps.

Problem with lenovo T530 display

I have recently bought lenovo T530, it had win7 pre-installed. and win8 upgrade disks available. I have immediatly upgraded to windows 8 then win8.1.
the problem is that the display is showing yello color instead of white, the yello keep flickering and although I have upgraded the drivers I still see the white colors as having spots of yello.
please help.

Okay here it goes...
1. First you need to save the T/W icc profile from this link: My custom profile
2. Right Click your Desktop and select "Screen Resolution"
3. Click "Advanced Settings"
4. Select "Color Management" Tab
5. Click "Color Management" button
This is where it can get a little confusing but I will try to make it clear.
6. Now that you are at the "Color Management" window, go to the "Advanced" Tab
7. Click the "Change system defaults..." button
Another "Color Management" window will open that looks just like the window you were in before, the only difference is that this one is called "Color Management - System Defaults"
8. Now go to the "Advanced" Tab in this new Window.
9. Next to the "Calibrate display" button there is a little square tick box which says "Use Windows display calibration", normally this does not have a tick in the box. Please tick this box and then press "Close"
You will now be back at the "Color Management" window, not the "Color Management - System Defaults" window.
10. In the "Color Management" window go to the "Devices" Tab
11. Place a tick next to the "Use my settings for this device" box.
12. Below go and press the "Add" button.
13. Browse to where you saved the .icc or .icm profile you want to apply and select it.
14. Now select your profile and press the "Set as Default Profile" button
If all has been done correctly you should notice a big difference on how colors are displayed. It should be for the better. If you want to toggle between having your profile ON and OFF, just tick or untick the "Use my settings for this device" box.
If you've been used to using your display with poorly calibrated colors, the new profile may come as a bit of a shock to your eyes but the colors should now be much closer to being correct than the default factory profile which is not even calibrated for the display. For example, if you are using the Windows 7 theme, you will immediately notice that the greys around boxes are grey now, not a light bluish grey.
Cheers
W530 | 3840QM | 32g @ 1.35v CL9 1986z | 512g 840 Pro | 1t HGST 7200 | FHD AUO v.4 | Quadro K2k | GOBI 5k | Centrino 6300

Activation problems with Cingular. Please help very frustrated

Ok, here is the deal, I live in Orlando, FL most of the time, but I am in Michigan and I bougt 2 iphones today, that was 1000 bucks, plus 200 in security deposits. I went to cingular, payed the deposit, and now that im at home, i cant register the product. I have been on the phone with cingular suppost getting different reasons why i cant answer but i still want to check it out here. Im getting an address verification problem. The guy is saying that when we payed the sucurity deposit, we put our florida market address on file with the Pre Approved Credit Check Number. THere saying our sim cards are michigan sim cards, and its not letting me register because of the sim cards are not in the same market as the credit check number. I tunes keeps giving me an error of address though. Is anyone receiving this same problem? The error is saying that they cannot verify the address on file, as the address that im typing in, even though it is the same address. We tried changing everything to michigan, and still got the same problem. We changed the address on the credit check number, and the address that im trying to register in michigan.
Please Help
Rodd,
Thanks guys
You can only imagine that im upset not being able to even power the thing up. It wont let you go past the emergency call feature since its not activated.
*****

Heres what you have to do Rodd...I used to be a RSM for Cingular.
First you need to cancel your first activation because your sim cards have been set up with activation in Michigan you will get a Michigan area code, prefix, etc. If you did not set it up with the exact are that you paid the deposit in, then you will not be able to activate it.
Ex: if I live in Texas, but want a California number, I have to go to Cali and set up my account, and then come back to Texas and I will have my Cali number while living in Texas.
If you tried to set it up wrong to many times it flags your account.
Either go back to the store you got them in and pay the security deposit again, or go to the closest ATT store in the area you would like to have your area code, prefix, etc. in.
Example: if you want a Michigan number, then go to Michigan..and set up your account all in the same place that you want your number....Billing addresses can be different but the activation address will be where the iPhone number is given from.
Hope this helps..God bless

Activation problem with lenovo miix 2

Similar Messages

Maybe you are looking for