Activation server problem after installing IOS5

I have a very specific problem:
Last year in July 2010 my brother died, I got from his legacy his Iphone which was sold by T-Mobile. I requested T mobile to unlock (SIM) as I had a subscription of of KPN. Untill then everything worked okey.
In September I made a switch to another provider Telfort, still then no problem my Iphone worked in order.
Today I installed a new version of Itunes 10.5.0.042, Itunes asked to install also new software on my IPHONE. I don’t know if he made a back up of my Iphone.
After doing so I had to configure my I phone. But now the Iphone gives me a message that my Iphone can’t be configured as the activation server is temporarily not available.
By Using Itunes is also no option as itunes tries to connect to the IPHONE and itunes is stating that there is no SIM Card in the Iphone, of course rubbish as there is for sure a SIM card in my phone.

I lost EVERYTHING...contacts, music, etc.....the music stayed in my itunes so I was able to re load it manually, but my contacts were also erased from the computer and the back ups too....iOS5 ****** me off

Similar Messages

  • I have the next problem: when i'm listening music and i change a song it's appears the background of my iPod between a song and another. This happens after install iOs5 =[

    I have the next problem: when i'm listening music and i change a song it's appears the background of my iPod between a song and another. This happens after install iOs5 =[
    Please help me

    I opened a new user on my computer yesterday with administrative privledges. I then opened up an itunes account from this new user. It seemed to go pretty well. I haven't downloaded any new songs yet or moved them to my account. I don't know how to move songs yet. I'm reading iPod and iTunes for Dummeies. Very appropriate for me. I will let you know when I manage to do this and am successful. Once again, thank you for your kindness and help. Kay 205

  • After installing iOS5 the syncing from iPhone to PC does not update PC.  PC to iPhone is okay.  Anyone having same problem and/or solution?

    After installing iOS5 on my iPhone 4 I am having a problem syncing Calendar, Contacts etc.  If I say add something in Calendar on my iPhone it will not sync to my PC, even though is says it is.  However if I add something to my Calendar on my PC (using Outlook) it will sync to my iPhone.  Anyone having the same issues and/or solution?

    Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
    Normal or safe mode still has same result. No startup, no option button and no customize.
    Thanks for your help. Got any other suggestions?

  • Setting up Abode Digital Editions, when I try to Authorize with my Abode id information I get the message "Activation Server Problem - check connection to the internet" when I clearly am connected to the internet ?

    Hi can anyone help me please this is driving me crazy ! I download and install Abode Digital Editions and when I try to Authorize with my Abode ID information I get the message " Activation Server Problem - check connection to the internet when I clearly am connected to the internet ?

    <moved from Downloading, Installing, Setting Up to Adobe Digital Editions>

  • I lost my Ical and some of my contacts after installing ios5 on my iphone and saving on icloud

    I lost my Ical and some of my contacts after installing ios5 on my iphone and saving on icloud. Please help!

    I had the same problem and just figured out how to fix it.  Go into your setting screen and then iCloud and turn off the contacts option.  Then click on keep on iPhone.  I did this and now all my contacts are back.  YEAH!!! 

  • Won't sync after installing ios5

    After installing ios5 my iPad won't sync calendar, notes, addresses with the server.  All was OK before this installation and I can sync with my pc but not over the net.   Any solutions, please?

    This may help:
    Syncing stays on 'waiting for items to copy' with iOS 5 (Updated)

  • A lot of problems after installing Windows XP using Boot Camp on a Mac Book

    I have been having a lot of problems after installing Windows XP Home Edition (2002).
    For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
    How do I fix this problem?
    Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
    A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
    D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
    ~Twilight

    ---I'm moving this topic to the Boot Camp forums.
    -Twilight

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • Printing problems after installing the Epson Printer Driver 2.16

    Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

    Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

  • Problem after installing 10.4.8

    Hello,
    I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
    So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
    The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
    Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
    Thanks...

    How did you update? Mac OS X 10.4.8 Update (delta)?
    http://docs.info.apple.com/article.html?artnum=304200
    After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 
    2.0 MacBook • 100GB HD • 2GB RAM   Mac OS X (10.4.7)   60G Photo iPod • AppleCare

  • After installing ios5 and having had to change my apple id to e-mail address I am unable to download updates as they were purchased under my previous id and it will not allow me to get back into the old id  Help please.

    After installing ios5 and having had to change my apple id to e-mail address I am unable to download updates as they were purchased under my previous id and it will not allow me to get back into the old id  Help please.

    Make sure you enter your new Id in settings/message, settings/facetime.  ANy content that you downloaded with the old ID is forever linked to that old ID and if you have apps that were downloaded with the old ID and you want to update them you can only do that with the old ID.  You could delete those apps and downlad them again ( and pay for them if they are not free apps)

  • Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

    great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

    The Yosemite upgrade very often damages existing Photoshop installations.  Thank Apple for that.
    You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
    But first, give us details about your setup:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Em12c changing oms server hostname - after install

    I installed em12c R2 on a server with an incorrect /etc/hosts file. This has meant it has picked up in the configuration files the incorrect hostname.
    Is there a straightforward way of changing an oms server hostname after install?
    jason.

    Depending on what you have configured, the steps are a bit different. Basically you need to backup and restore your configuration.
    Follow the steps to completely backup your env (OMS, swlib, Repository, Agent, Inventory) for safe keeping. http://docs.oracle.com/cd/E24628_01/doc.121/e24473/ha_backup_recover.htm#autoId4
    Export oms config --> key piece here!
    Screenshot the OMS agent targets for validation later
    Shutdown OMS agent and remove agent targets/host/agent from EM (as these need to be renamed and restored as well)
    Shutdown oms
    Validate your DNS/hosts file is correct before proceeding!
    Then you will follow one of the recovery steps documented (as the software restore portion is not required) - for example single oms, no slb, same host - http://docs.oracle.com/cd/E24628_01/doc.121/e24473/ha_backup_recover.htm#autoId15
    Recover agent
    Check agent targets, may require refresh of WLS Domain to get all targets in correct status again
    I have a document on the detailed steps I'd be happy to share. Please email me...

  • DVD drive problem after installing 10.5.6

    I have MacBook Pro 15",
    Model Identifier-MacBookPro 2,2,
    Intel Core 2 Duo 2.16 Ghz
    Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
    But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
    Before I install this update, everyting was ok!
    Please Help!!
    P.S Sorry, for my english

    Hi Drug;
    Have you tried resetting PRAM by holding down control, option, P and R during reboot?
    Allan

  • Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found

    Hi I have a problem after install my CS6.  It keeps saying MSVCR100.dll was not found?

    32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
    64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

Maybe you are looking for

  • Skype crashing when audio starts

    I am attempting running Skype on Windows 7 64 bit (Deskside PC) Whenever I attempt to use sound - either answering a call / making a test call / setting up audio -  Skype crashes - so I simply cannot use Skype . I have Realtek High Definition Audio i

  • Export my Freehand Document

    I am trying to export a brochure as a jpg because I need to keep the file size down. But my computer keeps giving me the message that it does not have enough memory to do it- I even tried the computer at work, but same message. I also tried exporting

  • How to change a Credit Card Commission Currency

    Hi Experts, I hope you can help me with a question I have... I have a USD Customer who is paying a USD AR Invoice by a Credit Card. I am in Banking -> Deposits -> Credit Card.  I have selected my Deposit Currency as USD, selected my Euro Bank Account

  • Changing node data not the node itself.

    Dear everyone, I'm trying to nest DOM hierarchies within another, and I have most of it worked out, but there are a few niggles. The first problem is as follows: My first document is: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <WfMessage

  • Download error cannot load the DLL (pdh dll)

     I've tried and tried several times to download Skype but half way through the down load I get the following error message: cannot load the DLL (pdh.dll)