Activation shows Unknown
Hello friends,
I have created an variable with the customer exit and created the code for it in ZXRSRU01. When i tried to activate it it shows an error the Variable XXX is unknown.
Could some one help me on this ...
Thanks in advance and points will be assigned...
Thanks
Sri
check your variable once again whether you have created properly.
regards,
vsn
Similar Messages
-
Ethernet showing 'Unknown state'
I have just bought a time Capsule wanted to backup using ethernet, but my iMac wouldn't detect the capsule. I tested it with my laptop and it found it fine, so the cable and capsule aren't the problem.
I found both ethernet and firewire ports showing 'inactive'. I activated them but now they both show 'unknown state'. I have always used wireless so don't know if the ethernet was always like this.
Any help would be greatly appreciated.
MikeI don't see where you said AirPort was OFF in the first post. And I did not mean to imply that you did not already have it connected with a Ethernet cable. Obviously, if you want it wired, there has to be a wire...
Try going to System Preferences Network pane. In the sidebar, if AirPort is listed above Ethernet, click on the little gear icon and select +Set Service Order+. Make Ethernet appear first on the list. Then try restarting. -
Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown? After we upgraded our appliances we are having issues with our ESA appliances showing the RAID status as unknown. When we reported the issue to CISCO we were updated there were no issues reported at all. Could anyone please confirm if you have experienced the same issue.
You should see OPTIMAL - meaning the drives in the C170 are in good health/status:
myc680.local> version
Current Version
===============
UDI: C680 V FCH1611V0B2
Name: C680
Product: Cisco IronPort C680 Messaging Gateway(tm) Appliance
Model: C680
Version: 8.5.6-074
Build Date: 2014-07-21
Install Date: 2014-07-29 11:16:34
Serial #: xxx-yyy1611Vzzz
BIOS: C240M3.1.4.5.2.STBU
RAID: 3.220.75-2196, 5.38.00_4.12.05.00_0x05180000
RAID Status: Optimal
RAID Type: 10
BMC: 1.05
There are times post-reboot, that you'll see and get notification of RAID sub-optimal --- meaning that the appliance is running through on a health-check of the appliance's RAID. You should be getting a notification once RAID status has returned to OPTIMAL, or as per the older OS revisions, READY:
myc170.local> version
Current Version
===============
UDI: C170 V01 FCH1428V06A
Name: C170
Description: Cisco IronPort C170
Product: Cisco IronPort C170 Messaging Gateway(tm) Appliance
Model: C170
Version: 7.6.3-019
Build Date: 2013-06-09
Install Date: 2014-09-12 13:52:24
Serial #: xxxxxxD87B39-yyyyyy8V06A
BIOS: 9B1C115A
RAID: 02
RAID Status: READY
RAID Type: 1
BMC: 2.01 -
my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???
By the way, i am using Windows 7 x64 and updated itunes
-
Itunes showing unknown error (-208)
itunes showing unknown error (-208) whenever I try to play anything. Any ideas?
Self Designed Mix Windows XP Pro Amd cpu
Self Designed Mix Windows XP Pro Amd cpuFlashmark, welcome to Apple discussions.
Glad you got it sorted!
Hi Flashmark wonder if you can help me ? New user and just down loaded a track from music store then authorised pc but unknown error (-208) "there was an error in the music store please try again later" keeps coming up... been trying for three days now but still the same message!! Can you Help please ? -
Hi. A very much help needed.
- iTunes keep showing unknown error (48) while restoring my iphone 4s
- I've already re-install iTunes various times
- Already delete previously downloaded 8.3 ipsw and re-downloaded it countless times
- Changed and edited hosts in windows drivers as per shown on guides
but... to no avail!!!!
I am now without any phone to be used.
HELP ME PLEASEHello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
My macbook air with snow leopard OS was purchased last year. Recently migrated to OS lion and have also installed Java RE. A Bank website while opening in Java shows one error which window activity shows some applets not opening. But it was fine in snow leopard. Will somebody help?
My macbook air with snow leopard OS was purchased last year. Recently migrated to OS lion and have also installed Java RE. A Bank website while opening in Java shows one error which window activity shows some applets not opening. But it was fine in snow leopard. Will somebody help?
-
How can I edit author name in my podcast after publishing...now it shows "unknown"...thanks a lot for help^^
The author's name is carried in the 'itunes:author' tag. You will need to enter it in the appropriate field in whatever program or online service you are using to make your podcast.
-
Oracle DBA team received a stack trace from our developers about an error generated by a JAVA appilcation using a WebLogic 8.1 application server and a Oracle 9.2.0.8 (RAC) database server with a Linux 2.4 OS. No database errors were logged into the database alert or listener logs, and no trace files were generated by database server on the same day. Developers are still looking for a cause.
Here is the info provided to us by the developers:
Nested StackTrace:
java.sql.SQLException:The transaction is no longer active - status: 'Unknown'. No further JDBC access is allowed within this transaction.
weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:219)
weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:228)
weblogic.jdbc.wrapper.ResultSet.getMetaData(ResultSet.java:184)
us.tx.state.rrc.common.util.QueryUtils.getSimpleResults(QueryUtils.java:455)
us.tx.state.rrc.common.util.QueryUtils.executeSimplePS(QueryUtils.java:373)
us.tx.state.rrc.pr.events.valueobject.BaseLeaseEvent.loadEventData(BaseLeaseEvent.java:182)
us.tx.state.rrc.pr.events.valueobject.BaseLeaseEvent.loadEvents(BaseLeaseEvent.java:194)
us.tx.state.rrc.pr.events.valueobject.BaseLeaseEvent.getEvents(BaseLeaseEvent.java:161)
us.tx.state.rrc.pr.events.PREventManager.getLeaseComingleEvents(PREventManager.java:104)
us.tx.state.rrc.pr.events.PREventManager.getAllEvents(PREventManager.java:81)
us.tx.state.rrc.pr.events.process.AutoResolveProcess.createTrxs(AutoResolveProcess.java:80)
us.tx.state.rrc.process.ejb.session.ProcessManagerSessionBean.initProcess(ProcessManagerSessionBean.java:427)
Application reportedly ran okay when resubmitted later on the same day without any other changes to the environment except a RMAN hot full backup finished before the second run. Developers have been unable to reproduce application error. Any ideas on where the developers should look for a more definitive definition of application errors?That message is a WLS-resident event. It means that the WLS-managed transaction
for which the thread/JDBC connection was operating, has already finished, whether by
having completed normally or having been rolled back. -
"" No authorization for number range object type GTIN and activity SHOW ""
While creating number range in number range administration for GTIN system showing the error
"" No authorization for number range object type GTIN and activity SHOW ""
Pls help me to solve this issueHi ,
Please check roles for user assigend as [ This is for super administrator ]
SAP_AIN_ADMINISTRATOR
SAP_AIN_OER_ADMINISTRATOR
SAP_AIN_SUPER_ADMINISTRATOR
SAP_AIN_SUPERVISOR
SAP_AIN_WORKER
and profiles assgined as
SAP_ALL
SAP_NEW
Hope it will helps
Thanks .,
V.Rangarajan -
No authorization for number range object type BTI and activity SHOW
Hi All,
When I try to execute
SAP Easy Access screen - > Auto-ID Infrastructure -> Master data -> Number Ranges -> Number Range Administration
on the next web window when I select the object type BTI , it comes up with the error
Number range table not maintained for object BTI in customizing
No authorization for number range object type BTI and activity SHOW
I am using AIN 5.1 . Is this an authorization issue ?. If so which all roles I should give to the user? IF you have any idea about this please share some tips.Hi Sahad,
Only few number range object types are available in the standard system:
Follow the link for help .
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm
Follow the for setting up the others.
http://help.sap.com/saphelp_autoid2007/helpdata/EN/45/e2240c7abb56dde10000000a114a6b/frameset.htm -
SOA11g: Transform Activity shows as Pending
Guys,
After migration of a process from 10.1.3.4 into 11.1.1.4, In many processes Transform/Assign activity always shows in pending state. Here is the xsl used in one of the Transform activity.
*<?xml version = '1.0' encoding = 'UTF-8'?>*
*<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"*
xmlns:tns="http://xmlns.oracle.com/AddUser"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue">
*<xsl:output method="text" omit-xml-declaration="yes"/>*
*<xsl:template match="/">*
*<xsl:for-each select="/tns:AddUserRequest/tns:UserGroups/tns:UserName">*
*<xsl:text>~ </xsl:text>*
*<xsl:value-of select="."/>*
*<xsl:text> </xsl:text>*
*</xsl:for-each>*
*</xsl:template>*
*</xsl:stylesheet>*
This is just one of the case, there are many processes in which assign/Transform activity shows as pending after migration.
the error it shows in audit trail is:
Error in evaluate <from> expression at line "140". The result is empty for the XPath expression : "ora:processXSLT(........)
and fault thrown by process is:
Non Recoverable System Fault :
*<bpelFault><faultType>0</faultType><selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"></selectionFailure></bpelFault>*
can someone help on this?
Thanks,
AB
Edited by: AB on Sep 26, 2011 11:28 PMThere is a known bug related to ORA:PROCESSXSLT() in PS3 (11.1.1.4). Raise a case with support and you should get a patch.
Regards,
Anuj -
Need to wipe an iPad activated by unknown user will not restore with out id
iPad was purchased by a School and was stolen, retrieved but activated by unknown user. Will not restore with out user ID. Need help.
Take it to an Apple Store with your original proof of purchase and they should be able to help you.
Matt -
Sdo geometry datatype showing unknown in bi administration
hi all,
Iam using obiii 11g .
iam facing data type issue. table contains sdo_geometry data type .
After importing the table from data base .
data type of one coumn showing unknown .but actuall its data type is sdo_geometry in data base .
whe i click view data ,data is not coming for particular that unknown data type.
what is compatibility data type of bi admin.
thanks in advance
baluWe opened an SR with Oracle (3-8366783331).
They found that there were some missing configurations.
The types MV_STRINGLIST, MV_NUMBERLIST and MV_DATELIST are not created in the schema used in the datasource
Solution
Create the types as the user connected to the Mapviewer Datasource
conn / as sysdba
grant create type to user;
conn user/password
CREATE or REPLACE type MV_STRINGLIST as TABLE of VARCHAR2(1000);
CREATE or REPLACE type MV_NUMBERLIST as TABLE of NUMBER;
CREATE or REPLACE type MV_DATELIST as TABLE of DATE; -
Why Firefox not Sync will automatically showing unknown error?
why Firefox not Sync will automatically showing unknown error?
How long has been this happening? Have you tried again?
I will encourage you to use the recommendations on this article whenever Sync returns Unknown errors for a long period of time.
[[Firefox Sync is not working]]
Sometimes it's just as simple as a connection issue between your computer and the servers.
Maybe you are looking for
-
HHi, i am trying to copy my iTunes library onto an SD card so that I can put it in my Audi A4 with the MMI. Is there any way of doing the transfer on iTunes but keeping the structure of iTunes, such as with albums, artists, playlists etc? THanks in a
-
Enterprise Manager 11g Sybase Plugin architecture question
Hi, have successfully installed and configured Grid 11g on RedHat Enterprise 5.5. Deployed and configured agents to solaris and linux environments..so far so good. However, we're going to test the Sybase ASE plugin to monitor ASE with EM. My question
-
Is this brand new MacMini new?
I went the the Apple Store 2 days ago and purchase a MacMini (i7 2.3) and when I got home and booted it up, I realised that it has 10.8.3 and not 10.9 (Maveriks) So it's safe to think that this mini has been on the warehouse shelves for about 10 mont
-
Mail reduces pictures size - How can I stop this?
Hello, Recently whenever I want to send a picture with a good resolution (for ex 2MB), Mail reduces it automatically down to 100 or 200 kb.... Ok I know it's better to send smaller attachement, but sometimes I want/need to send full resolution pictur
-
Zip multiple files or folders but keep the file name
These two example files need to be compressed into one zip 20150113-Signs-R04.eps 20150113-Signs-R04.jpg As you know the the default name of the zip becomes: Archive.zip I would like it to be: 20150113-Signs-R04.zip I understand the ZIP utility canno