Activation Transfer?

I got this message while trying to uninstall CS2 so that I may install CS5.
You see, I am a homeschooler and my mom is the homeschooling teacher, she got me CS5 for my Christmas present this year. Because I was done with my older software, I decided to give it to my older sister (also a homeschooler). I had CS2 installed then a CS3 upgrade, from what we have been told years ago, we needed to install it like that CS2 then CS3 on top because it was an upgrade. Since we were installing CS5 from scratch (not upgrading upon CS2), we had to uninstall the previous versions of Creative Suite. So I was doing that until I got this message while uninstalling. I don't want to ruin my sister's chance of being able to install it on her computer.
We wanted to install it before Christmas so that if we ran into any problems we could call the tech support number. When we got this massage we called but then they told us we had to come here for help. If anyone can, that would be great. Thanks.
I haven't exited out of the message yet, so I can still choose an option.
I think you can contact me through email or PM. Again, thanks and Merry Christmas!

There is no need to uninstall earlier versions. I don't know where you got that idea from but it's totally false.
The only thing that will happen when you hit the transfer activation button is that it will reset the activation counter on Adobe's servers. Further, since it was used to upgrade to CS3 make sure to deactivate CS3 and simply install that. Since it was an upgrade, you'll need to have the CS2 disks and serial number handy.
Merry Christmas,
Bob

Similar Messages

  • Activating Transfer Structure

    Hello Experts,
    While Activating transfer strucutre. Am getting the below error message for some XXX trnasfer structure -
    Error while creating table 'EDISEGMENT' entry '/BIC/XXX
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/XXX' in table 'EDISEGMENT'. The attempt failed.
    System Response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists.
    Can anyone please guide how to step into further
    Warm Regards,
    Aluri

    Hi Aluri,
    Try implementing the fixes and the recommendations in "Note 493422 - Inconsistent IDoc segments/transf. structures in srce system"
    I think this is very relevant to your problem.
    Good luck,
    Ali

  • Error while activating Transfer Structure

    Hi Expert,
    we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
    Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
    System Response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists
    I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
    I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
    Regards,

    Hi Dubey,
    I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix  this.
    Thanks,
    Renu

  • Error : Activating transfer rules

    Hello Experts,
    I get the message "Error Generating Program" while activating the transfer rules.
    The detailed error message refers to RSAR245 or note 636217. Note refers to table row size being exceeding 1962 bytes. But my transfer structure row size is below 300 bytes.
    Any suggestions appreciated.
    Thanks,
    Sweatha

    Hi Sweatha,
    Sometimes I have experimented this kind of error when activating transfer rules. It seems that there is some content in the buffer that provokes this error. I suggest you to log off the system, login again and try to activate the transfer rules.
    Regards,
    Andreu

  • Error while activating transfer cules of 0CUSTOMER_TEXT in BI 7

    Hi,
      I am finding the following error while activating 0CUSTOMER_TEXT in BI 7
      1.  Transfer structure 0CUSTOMER_TEXT_BA does not exist and
      2.   Data element for TXTMD could not be created.
      Can you please suggest me how to resolve these issues ?

    did you replicate ur 0CUSTOMER_TEXT as 7.0 datasource, then you need to use transformations and not transfer rules. if you dont want to use 7.0 Ds, then go to RSDS and recover the datasource to 3.x(menu options). then you can use 3.x dataflow.

  • Error while activating transfer structure and communication structure.

    Hi all,
    I am getting an error while activating the transfer structure, I have the same datasource comming from a 2nd instance of R/3 and its working fine with the 2nd source.
    I mean same datasource comming from two R/3 instances and connecting to one infosource.
    <b>Maximum length of segment is 1000 characters, current length is 2567</b>
    Please let me know.
    thanks,
    Sabrina.

    Hi Sabrina...
    there is an OSS Note (120446) related to your problem, but it seems related to a very old release (what's yours ?)
    Anyway, it suggests:
    "the transfer method in the transfer rules must be set to TRFC with ODS"
    Hope it helps!
    Bye,
    Roberto

  • Error while activating transfer rules needs help.

    The error while activating 0FI_AP_6 transfer rules is listed below.
    ''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

    Hi
    The problem is with your data source replication.
    Activate your data source & replication too.
    Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
    If not so, Activate your transfer rule manually.
    Regadrs
    Saravanan.ar

  • Error while activating transfer structure for 0MATERIAL_ATTR

    I am trying to activate the transfer rules of 0MATERIAL_ATTR, but when activating the process end with the following message:
    Error generating program
    Message no. RSAR245
    Diagnosis
    An error occurred in the program generation:
    Program / Template:   RSTMPL80
    Error code / Action: 6
    Row:        1,792
    Message:    The data object "P_S_COMM" has no component called
    I cannot activate the transfer rules of 0MATERIAL_ATTR and 0MATERIAL_TEXT because of the same problem. Could anyone please help me...
    Thanks in advance for your valuable help.
    Regards
    Carlos España.

    Ron Silberstein:
    I really appreciate your help, thank you very much.
    I saw your profile, and i saw that you are an expert in BI.
    Congratulations, your help was very important for me.
    CONTINUE HELPING OTHER PEOPLE!!!!! T H A N K S!!
    God Bless you.
    Regards
    Carlos España.

  • Dump when activating transfer rules

    Hi All,
                 I am trying to create transfer rules and activate from a DB connect source system and I am getting the following error when activating.
    Runtime Errors         ASSERTION_FAILED
    Short text                                                                               
    The ASSERT condition was violated.                                                                               
    What happened?                                                                               
    In the running application program, the ASSERT statement recognized a                        
        situation that should not have occurred.                                                     
        The runtime error was triggered for one of these reasons:                                    
        - For the checkpoint group specified with the ASSERT statement, the                          
          activation mode is set to "abort".                                                         
        - Via a system variant, the activation mode is globally set to "abort"                       
          for checkpoint groups in this system.                                                      
        - The activation mode is set to "abort" on program level.                                    
        - The ASSERT statement is not assigned to any checkpoint group.                              
    Can somebody help me with this error?
    Thank you.

    BI User
    Please check the OSS Notes 914998 and 791549 and see these notes helps
    Thnaks
    Sat

  • Activating transfer rules for new source system

    Hi
    we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
    how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
    Regards
    Sujai

    Hi Sujai,
    There are many cases when this program is used.
    When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
    It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
    If the program does not work,then you are left with the transport option.
    Thanks & Regards,
    Suchitra.V

  • Activating Transfer Rules

    Hi All,
    After activating the Transfer Rules (means ) what will happen in bw side .  I mean what about psa & Transfer structure?  In the backend of the system exactly what happens while activating T.R's?(what structure formats will create).
    Its my interv ques.  Pls help me.
    Thanks inadvance,
    K. Yogeswaran.

    Hi,
    When you activate transfer rules your BW will create an extract structure, a PSA table, generate a program to write the extracted records into your PSA, generate a program for the transformation of your extract structure into the communication structure (you TRules).
    The PSA table is having exactly the same structure than your extract structure. Now imagine that you had data already in your PSA table.  If you remove a field from your extract structure, that would mean remoiving a field from your PSA table.
    Since you will loose data, the system will generate a new version of your PSA table. You can check the PSA table versions in table RSTSODS. Adding a field to the extract structure won't result in a new PSA table.
    hope this helps
    Olivier.

  • While activating Transfer rules....

    Hello BW gurus,
    I am extracting CO Transaction Data from SAP R/3 into BW. I replicated 0CO_OM_CCA_1 standard Data Source into BW and assigned BI Content 0CO_OM_CCA_1 Info Source .
    1) In the Transfer rules , all the fields from Data Source got mapped to the fields in Communication structure , other than those  fields I find some fields(extra) in communication structure which are empty, I mean those fields did not get mapped . 
    1) what is the reason behind it , what is the main concept ?
    2) how do I map these extra fields in communication structure ,and activate Transfer rules?
    Points will be alloted ,
    Thank you .

    Hi Prarthana,
    It is not mandatory that all the fields in Communication structure get mapped to the fields retrieved from source system. You can have extra fields in the communication structure means you can map some more fields from source using another data source by assigning same Infosource.
    Without mapping them, you can activate Transfer rules and load data.
    You can map them and load data into other fields using another datasource.
    Hope this helps u...
    Regards,
    KK.

  • Error while activating transfer rules

    Transfer method 'TRFC with PSA' is not supported by the source system
    Message no. RSAR508
    Diagnosis
    The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
    Procedure
    Define the PSA in the source system.

    Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
    If you still face this error even after changing Transfer method, check below thread.
    Transfer method 'TRFC with PSA' is not supported by the source system
    Edited by: koundinya karanam on May 22, 2008 12:47 PM

  • BI Content Error when activating transfer rule / SAPSQL_ARRAY_INSERT_DUPREC

    Hello Experts,
    when i want to iinstall the transfer rule /CRMBW/OLTP_OPPORTUNITY_ITEM
    from Data Source /CRMBW/OLTP_OPPORTUNITY_ITEM to InfoSource
    /CRMBW/OPPORTUNITY_I  (all Business Content Objects) Iam facing the following situation:
    1. When I use "Simulate Installation" i get the warning for all of the fields: Field APP_SERVER is not supported by DataSource /CRMBW/OLTP_OPPORTUNITY_ITEM in source system SLOGICOCRM. Transfer rules were deleted however, delivered.
    2. When I use "Installation" i get a  dump of the following type:
        Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
        Except.                     CX_SY_OPEN_SQL_DB
        Error in the ABAP Application Program
        The current ABAP program "CL_RSAR_FORMULAS==============CP" had to be
         terminated because it had come across a statement that unfortunately cannot be executed.
        More details of the dump are:
        Trigger Location of Exception
        Program                                 CL_RSAR_FORMULAS==============CP
        Include                                 CL_RSAR_FORMULAS==============CM00E
        Row                                     40
        Module type                         (METHOD)
        Module Name                       GENERATE_ACTIVE_VERSION
    The problem is, i can not map the transfer rule by myself because the the transfer structure contains some important Routines and Formulas which are missing in thereports and i dont know the source code they are using.
    Can anybody help me?
    Greetings from Barcelona
    Oliver
    Edited by: STRATESYS CONSULTING on Jul 23, 2009 2:35 PM

    Hi Oliver,
    Can you please check if you can use the SAP notes 1263075 and 985052 to resolve the problem?
    Best Regards,
    Des

  • Error when activating transfer rules

    Dear Experts,
                     I am getting the following errors when trying to activate my transfer structure. I am working on a system that has been just upgraded. So, any idea of what the problem could be?
    Here is the error:
    Mapping between data source 0FI_AR_3 and source system AMC_103 is inconsistent
    Message no. RSAOLTP380
    Thank you very much.

    Hi venkat
    Please check the OSS note 606437
    Sriram

Maybe you are looking for