Activation Update

Well I just hit hour 40, I have been on hold for over an hour with the 3701 number to see if I can get some answers. The last person I talked t oat around hour 38.5 told me the email I received with my order number marked a 24 - 48 waiting time.
What I don't get is that I am an existing customer, and I activated before most of the country did but it is taking 40 hours when people who got it today or yesterday got activated in 2 minutes.
They keep telling me it is putting people in line for activating ect ect..At hour 40 I hsould be at the top of the stinking list. But people who get it a day or 2 later than me are having no problems...
What gives here?

The problem is they are sayign activation and everything is 100% complete on their end. I am waiting for someone to "message my itunes" according to them and that will kick me a activation email.
Basically I am waiting on their email server to kick me a email saying "Click this link" according to them right now.

Similar Messages

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error while activating update rule in Inventory

I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.

1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu

Actively update linked files?

Is it possible to force Illustrator to actively update linked files as they are saved in Photoshop? I'd like to place a PSD into AI, for Live Trace, then edit the PSD and see the updated Live Trace without clicking in Illustrator.
AICS 5 or CC

Yes, that's possible.
Under preferences / File handling & Clipboard, there is a dropdown you can switch to: Automatically.
https://www.dropbox.com/s/rx6yjktxkjkruqg/update-linked-files-illustrator-6.jpg
Good luck!

I'm help a friend with a new 4S iPhone. He's converting from an old 3GS. We've gone throughout the activation, update to iOS 5.0.2 and restored. Now I'm surprised to find that the Facetime app is not on his new 4S iPhone. How do we fix this?

I'm helping a friend with a new 4S iPhone. He's converting from an old 3GS. We've gone throughout the activation, update to iOS 5.0.2 and restored. Now I'm surprised to find that the Facetime app is not on his new 4S iPhone. How do we fix this?

I would suggest you read the user guide. There IS no Facetime App for the iPhone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
< Edited By Host >

Can I install Flash CS4 after installing, activating & updating Photoshop CS5 ?

Can I install Flash CS4 after installing, activating & updating Photoshop CS5 ?

Sure. I have Flash 8, CS3,4,5 all installed and each will run.

Error while Activating update rule in BW

Hi,
I am getting an ABAP dump while activating an update rule. The rule is from DSO to cube.
"MESSAGE_TYPE_X" " "
"%_T020N1" or "%_T020N1"
"INSTANTIATE"
I have added some new fields in a DSO. The rule is from DSO to cube. While activating it, I am getting this ABAP dump. There are few other rules from this DSO to other DSO which got activated but this one is causing dump.
Any ideas/suggestions on this would be really helpful.
Thanks,
Naveen

Hi
Check if your Cube , DSO and UR's are active. If not reactivate them. Ideally you could recreate the UR's and check the status by running the extraction.
I would also recommend to use elimination method to check if any particular field is creating an issue. While recreating the UR's , create them for a few fields - active - check extraction - this will also let you know if the issue is within any oif the rules.
Cheers
Umesh

ABAP Runtime error while activating Update rules.

Hi Gurus,
Actually we are in NW 2004's SP9.
While activating the update rules of cube "0PY_PPC01" it is going to ABAP runtime error. It is giving the key words like "MESSAGE_TYPE_X"
"%_T005K2" or "INSTANTIATE". And i apply NOTEs also i am unable to fix it.
Can any one give correct NOTE number that can fix it or any suggestions.
Thanks in advance.
Thanks
Raju.k

Hi Sven,
Now we are also in SP11, But the thing is all the other UR are working fine Except
this UR. Even there is no perticular NOTE number for this.
Thanks
Raju.k

Error when activating update rules

Hi ,
0RT_C36 cube shows --- stock per weeek (ocalweek)
My requirement is on daily wise .
So i copy the standard one 0RT_C36 and add the 0cal day.In update rule 0calweek has the reference feild posting date For 0calday i mapped with the same feild posting date . Error has occured when activating the update rule . Error is' No component exists whith the feild sid_calweek_f.
Regards
chakra

Hi,
The Automatic conversion in the update rules helps us map 0CALDAY of Info source to 0CALWEEK of the cube. So it is not a problem with this mapping.
These type of problem occurs especially when we copied update rules. So what we have to do is checking all mappings for corectness in the mapping.
With rgds,
Anil Kumar Sharma .P

Data Targets does not show up despite having Active Update Rule

Hi mates,
I have an Info Cube of which I have created an Update Rule from a Active Info Source.
However, when I created the Info Package, the 'Data Targets' tab does NOT seem to show the Info Cube as part of the Data Target
Please advice

hello John;
check if this is a Basic cube or Transactional cube. If for some reasons this has been created as a transactional cube then you won't be able to see the cube on the InfoPackage because you theoritically you won't be loading data into the transactional cubes.
let us know the details.
Regards:
BK

Flash buttons gone after active-update

Hi,
Just performed the active-contect update for flash and
dreamweaver.
After the flash update, nothing had changed. Still needed to
click to activate a button, made in flash (8).
Then I installed the dreamweaver update 8.0.2., also with
updates for active content.
After opening the pages in Dreamweaver 8 I got the promised
question what I wanted to do with the <object> items.
I choose to update them.
Now everything worked fine when I testet the page on my own
server (PC) but the oploaded files where NOT.
All flashbuttons where gone, they just didn't appear!
It took a while untill I found out what the problem was.
Since everything worked fine on my own server, It had to be
something with the uploaded files.
All pages where changed, uploading the swf files didn't bring
the solution, so it had to be something else.
My site has many folders, it's a big site.
When I checked the folders on my own servers I found a new
folder called: Scripts
Uploading this folder solved the problem.
Nowhere in the manual, help files or explanations is
mentioned there will be a new folder called Scripts.
When you have a small site with a few folders, you will
easily spot it, but when you have more then 50 folders.....
Regards,
Eric

"Eric72" <[email protected]> wrote in
message
news:ej1v80$9f$[email protected]..
> Hi,
> Just performed the active-contect update for flash and
dreamweaver.
> After the flash update, nothing had changed. Still
needed to click to
> activate
> a button, made in flash (8).
> Then I installed the dreamweaver update 8.0.2., also
with updates for
> active
> content.
> After opening the pages in Dreamweaver 8 I got the
promised question what
> I
> wanted to do with the <object> items.
> I choose to update them.
> Now everything worked fine when I testet the page on my
own server (PC)
> but
> the oploaded files where NOT.
> All flashbuttons where gone, they just didn't appear!
>
> It took a while untill I found out what the problem was.
> Since everything worked fine on my own server, It had to
be something with
> the
> uploaded files.
> All pages where changed, uploading the swf files didn't
bring the
> solution, so
> it had to be something else.
>
> My site has many folders, it's a big site.
> When I checked the folders on my own servers I found a
new folder called:
> Scripts
> Uploading this folder solved the problem.
>
> Nowhere in the manual, help files or explanations is
mentioned there will
> be a
> new folder called Scripts.
> When you have a small site with a few folders, you will
easily spot it,
> but
> when you have more then 50 folders.....
Good point, it should say so in the Help files - you might
want to let Adobe
know of that oversight.
Personally, I was pretty happy to have that problem solved so
quickly and
automatically by Dreamweaver - seemed like a big convenience
to me..
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Problem when I active update rule

Hi experts,
I have the following problem;
I have created updtes rules, but when I try active, change, display or delete the system tell me :
Infobject is not contained in the infocube.
Could you help me, please?
Thank you.

Hi,
The objects you are mapping in the update rule is deleted by you or someone else while you were creating update rule.
Start RSA1 again so that data targets will be refreshed, check the mapping and try to activate again.
Kams

RSAU461, problem with activating update rules for cube 0csrv_c01

Hello,
I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
Regards
Radek

hi
As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
Khaja

Admin Panel - Site Activity Updates?

I've created publishers for two different sites. On my Admin
panel, I can see the activity for each site along with the invites
being sent. Will the status be updated in the InContext Admin panel
for each site when the invite is accepted? Will I also see
editing/publishing activity for each site? So far, the system seems
to work quite well, I'm not sure what information I should be
seeing on the admin panel. Thanks.

Hello Skeggs91,
Yes, your description is exactly what you will see in the
"News" section of the Admin Panel... You will see all activity
related to a site, including draft publishing, saving, invitations
sent, and invitations accepted. The list will include activity from
each user - organized by date.
Best regards,
Corey

Activation Update

Similar Messages

Maybe you are looking for