Activation windows server 2012 r2

Hi. I have windows server 2012 r2 standart it is a domain controller. I have a product key. How can i activate the server??? Please Put the step by step instructions.

Run these commands :
Slmgr.vbs –ipk your product key
Slmgr.vns –ato
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

Error 0x80072ee7 when activating Windows Server 2012 Standard ROK

I am installing windows server 2012 standard ROK onto a HP Proliant micorsever. I installed the product key using elevated command prompt (found instructions on hp site), but when I get to the point to activate the operating system using the following
command cscript C:\windows\system32\slmgr.vbs -ato, I get an error message --> 0x80072ee7 On a computer running Microsoft windows non-core edition. Why is this happening? From prior research that I've done do I need to install a KMS Client
key and if so what is the proper key for the OS that I am using?

Hi,
The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or for the Microsoft Update Web site. This error may occur if the Hosts file contains a static IP
address also might occur due to one of the following reason.
• Programs or processes that interfere with Internet communications
• Resource issues on the computer
• High Internet activity
To resolve the error examine the Host file (under System32\driver\etc folder) and check that Make sure that the file does not list any static IP entries for the Windows Update Web site or for the Microsoft Update Web site. Mean time sharing the article with
you.
1. 0x80072EE7 error code
2. KB 836941
Hope it helps!
Thanks.

Error code 0X8007007B when activating windows server 2012

error code 0X8007007B when activating windows server 2012

If your key is for KMS activation it will never activate without the KMS server, make it sure that you have KMS server and your server is reachable to the KMS server. Please see this Kb ARTICLE
http://support.microsoft.com/kb/929826/en-us
http://www.arabitpro.com

I have windows server 2012 R2 and install active directory

My question is I install active directory in windows server 2012 R2 and create Group Policy. ( These set-up is only for test)
Have not registered domain only install active directory to test.
So the problem is when I created Group policy for my user and put software restriction policy but its affected to my administrator accounts too, No when I open VMware (install Virtual Machine windows XP) and start os then its shows you can not user this
software as you restricted from installing software (Something like that don't know exact Error). I could not start installed Virtual Machine.
Please give me a solution for this.
This is the setup for a test use only so their not big environment connect with my pc.
Thanks in advance.
Regards,
Krunal

Hi,
The following article is talking about creating and managing Group Policy on a Windows Server 2012:
http://www.thomas-krenn.com/en/wiki/Creating_and_managing_a_Group_Policy_on_a_Windows_2012_Server
As Darren Blanchard mentioned, if you want to apply the GPO, you could link it to an OU that contain the computer or user.
Group Policy Overview
http://technet.microsoft.com/en-us/library/hh831791.aspx
Please feel free to let us know if you need further assistance.
Regards.
Vivian Wang

Upgrade from Windows Server 2012 Active Directory to Windows Server 2012 R2 Active Directory

We are currently running Windows Server 2012 Active Directory and would like to upgrade to Windows Server 2012 R2 AD. Is it OK to just do an in-place upgrade, or is it advisable to build new domain controllers on R2? Are there any guides or articles anyone
can recommend?

Hi Ginandtonic,
To upgrade DC(Domain Controller) from windows server 2012 to windows server 2012 r2, please refer to these articles:
Upgrade from windows Server 2012 to 2012 R2
Upgrade Active Directory from 2012 to 2012 R2
I hope this helps.
Best Regards,
Anna

Join to Windows Server 2012 Active Directory.

How to I join Windows Server 2012 Active Diretory without putting manually Windows Server 2012:s ip adress at ?referred DNS server? Can someone help me?

I'm not sure what you are asking here. Are you asking how to join another server to a Active Directory domain without having to enter IP information into that other server? If so, the server joining has to have an IP address and it has to have
a DNS entry that knows about the Active Directory domain. Therefore, there are two ways to accomplish this. First is to assign a fixed IP address and DNS address to the server you are trying to join to the domain. The second is to have a
DHCP server in the environment that will assign the IP and DNS. Alternatively on the second option is to have DHCP assign the IP address and then you manually specify the DNS that knows about the Active Directory domain being joined.
No matter how you do it, it has to have a valid IP address and DNS entry that knows the location of the AD domain.
. : | : . : | : . tim

Windows Server 2012 RS essentials activation

Hi Guys,
Just a quick query regarding activating my version of 2012 server,
cscript slmgr.vbs /dli
Name: Windows(R), ServerSolution edition
Description: Windows(R) Operating System, TIMEBASED_EVAL channel
Partial Product Key: C36WX
License Status: Licensed
Timebased activation expiration: 11626 minute(s) (9 day(s))
This is the output, will i be able to just purchase a copy of 2012 essentials and use the key? I've not seen "ServerSolution" in the output before/
Many thanks,
James

Hi James,
It seems that the ServerSolution edition means Windows Server Essentials.
According to the description of TIMEBASED_EVAL channel, I assume that you are using a evaluation version, right? For Windows Server 2012 Essentials, you can convert to the full retail version by entering a retail, volume license, or OEM key
in the command slmgr.vbs. Since this key is going to be expired, if you want to change it to the retail version, you just need to buy a license key.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to install first forest and active directory on the windows server 2012 R2 core?

hi to all
i installed a windows server 2012 R2 Core edition on the server platform and i want install first forest and Domain on this server core by cmdlet...but i cannot install it. i search in the technet and other sites and blogs on the internet
and i saw many commands that use for install it such as "DCpromo /unattend" and even
"Install-addsforest" in the powershell but still i cannot get a result from these commands.
i need step-by-step guide that help me for install new forest and domain in the server 2012 R2 core.
thanks a lot friends

C:\PS>Install-ADDSForest
-DomainName mydomain.local -CreateDNSDelegation
-DomainMode Win2012 -ForestMode Win2008R2
-DatabasePath "d:\NTDS"
-SysvolPath "d:\SYSVOL"
-LogPath "e:\Logs"
you can use above example
Darshana Jayathilake

Windows Server 2012 Standard Evalution activation

Hi Guys.
I have deployed a Windows Server 2012 Standard Evaluation and have installed AD, DNS and DHCP roles on the server, and it is now my production server, i have a Volume Licence Key and now needs to activate it to Windows Standard 2012 Standard and not Evaluation,
kindly assist i am only left with 3 days.
Regards
NicWaks

You might have a problem here. This is an extract from that TechNet article
If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additional domain controller on a server that runs a retail version and remove AD DS from the domain controller that runs on the evaluation version
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Windows Server 2012 R2 - Join Domain fails (Active Directory)

Well guys - I don't know what to do about this problem anymore...
I set up a DC for my home network - Windows Server 2012 R2 Foundation. Everything is set up fine - DNS, AD - I suceeded joining the domain with other PCs in the network.
Problem:
When I want to join the domain "lionnet.at" it tells me that it cannot find the network address after I typed in the domain admin password.
The dns entries are fine - checked it with nslookup. The DC name is lionhead.
nslookup:
set q=srv
> set q=srv
> _ldap._tcp.dc._msdcs.lionnet.at
Server: lionhead.lionnet.at
Address: 10.0.0.150
_ldap._tcp.dc._msdcs.lionnet.at SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = lionhead.lionnet.at
lionhead.lionnet.at internet address = 10.0.0.150
I tried several solutions: editing the lmhosts/hosts file, deactivating IPv6, setting a static IPv4
Any ideas on this?

what the hell...it was an external soundcard preventing the join...i installed it a week ago - unplugged it - "Welcome to the domain lionnet.at!"
Hi CloneBraveB,
Glad to hear that you have solved this issue and thanks for sharing in the forum. Your time and efforts are highly appreciated.
Would you please let me know the complete error message that you get when failed to join the problematic client computer to the domain?
In addition, for a test, please select another computer and install the external soundcard again, then attempt to join the computer to domain. Did you reproduce this issue?
By the way, would you please let me know more details of that soundcard?
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ASA and RADUIS on Windows server 2012

hi i have ASA5505 i want to get the Authentication from Raduis Server using NPS on windows Server 2012 i test the Raduis Server over "Kerio Control VMware Virtual Appliance" its work Perfect for testing my Setting on Raduis but with the ASA5505 i get this message "Error authentication rejected aaa failure"
Running Config
: Saved
ASA Version 9.1(3)
hostname NazcoFW
domain-name default.domain.invalid
enable password XgEKS9WizHnI9IUJ encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd XgEKS9WizHnI9IUJ encrypted
names
interface Ethernet0/0
switchport access vlan 22
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 12
interface Ethernet0/3
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 32
shutdown
interface Vlan1
nameif NAZCO
security-level 100
ddns update hostname OSI
dhcp client update dns server both
ip address 172.16.200.1 255.255.255.0
interface Vlan12
nameif outside4
security-level 0
ip address 172.16.4.254 255.255.255.0
interface Vlan22
nameif Outside20
security-level 0
ip address 172.16.20.254 255.255.255.0
boot system disk0:/asa913-k8.bin
ftp mode passive
dns domain-lookup NAZCO
dns server-group DefaultDNS
name-server 10.1.1.1
name-server 10.1.2.1
domain-name default.domain.invalid
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network HP5220
host 10.10.10.105
object network ak20
host 10.10.10.110
object network hp5520
host 192.168.2.105
object network HP7000
host 192.168.2.106
object network HP5520
host 192.168.2.105
object network ak04
host 10.10.10.110
object network HP400
host 192.168.2.107
object network out04
range 192.168.2.200 192.168.2.220
object network AK04
host 10.10.10.110
object network oooo
subnet 10.10.10.0 255.255.255.0
object network 444
host 10.10.10.110
object network OSITOINT
subnet 10.10.10.0 255.255.255.0
object-group network OSItoOUT04
network-object object out04
access-list outside20_access_in extended permit icmp any4 any4
pager lines 24
logging enable
logging asdm-buffer-size 512
logging trap informational
logging asdm informational
logging host NAZCO 10.10.10.10 17/6161
logging debug-trace
logging permit-hostdown
mtu NAZCO 1500
mtu Outside20 1500
mtu outside4 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-721.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (NAZCO,outside4) source dynamic any interface dns
nat (NAZCO,Outside20) source dynamic any interface dns
route Outside20 0.0.0.0 0.0.0.0 172.16.20.1 1
route outside4 0.0.0.0 0.0.0.0 172.16.4.1 11
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 NAZCO
snmp-server host NAZCO 10.10.10.196 community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity fru-insert
snmp-server enable traps remote-access session-threshold-exceeded
snmp-server enable traps connection-limit-reached
snmp-server enable traps cpu threshold rising
snmp-server enable traps ikev2 start stop
snmp-server enable traps nat packet-discard
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh scopy enable
ssh 172.16.200.0 255.255.255.0 NAZCO
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
management-access NAZCO
dhcp-client update dns server both
dhcpd dns
dhcpd update dns both
dhcpd address 172.16.200.20-172.16.200.89 NAZCO
dhcpd dns 172.16.20.1 172.16.4.1 interface NAZCO
dhcpd lease 1048575 interface NAZCO
dhcpd update dns both interface NAZCO
dhcpd enable NAZCO
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
username admin password bZmVDHuxUzzxS3yz encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect icmp error
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
service call-home
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:357b7c6f861e8aa9bb3a3674a789b39b
: end
asdm image disk0:/asdm-721.bin
no asdm history enable

Hi
Looks like the AAA configuration is set for local
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
Change it to Radius
aaa-server Keefa-Raduis protocol radius
aaa-server Keefa-Raduis (NAZCO) host 172.16.200.10
key *****
radius-common-pw *****
for example :
aaa authentication telnet console Keefa-Raduis LOCAL
Now when you will do telnet to using Radius credentials, Its Should work, If radius goes down you can use LOCAL username and password as fallback method.
Cheers!
Minakshi(Do rate the helpful post)

Intermittent loss of UNC path access on Windows Server 2012

Hi All,
I hope someone can help with a major headache we've been having on two Windows Server 2012 boxes since September this year. Basically, these servers will intermittently lose the ability to browse network shares from windows explorer and the only way we have
found to resolve this is to reboot. When the issue happens, we can't even log into the server as it sits at 'applying user settings' - presumably as it is failing to access the netlogon share on our DCs. If we have an active RDP session when the issue occurs,
we can connect. In this instance we see that if you enter a UNC path in Windows explorer and hit enter, nothing happens - no error messages or anything. The only way I can get any response is when trying to access the IPC$ share on another server, which gives
the following response:
\\server\ipc$ is not accessible. You might not have permission to use this resource, Contact the administrator of this server to find out if you have access permissions.
The parameter is incorrect.
Everything looks right from a physical network perspective, as we can ping from the affected servers and DNS queries are working fine. I can even run net view from powershell and see the local servers and shares on these, however any attempt to access shares
just hangs the powershell session.
If I look in the SMBClient event logs, I can see entries like the following:
Event ID 30805
The client lost its session to the server.
Error: The transport connection is now disconnected.
This is made worse by the fact that when this issue happens, we can't even cleanly reboot the server (it just hangs) and have to perform a cold boot.
The firewall has been turned off and we have taken off our antivirus software to eliminate it as a possible cause. We have even rebuilt one of these servers on a clean install of 2012 R2, but the issue re-appeared. We have also tried using different NIC
drivers (Broadcom NICs installed) to no avail. We have also tried disabling IPv6.
We have logged a ticket with Microsoft support, who have come back telling us that this could be related to a known bug with DFS in 2012 for which a fix is being tested prior to release in a few weeks. However, I can't sit around on my hands until then on
the off chance that this fix will resolve our problem. These servers are hosting our production Lync 2013 front end service and when this issue occurs it breaks the address book search and response group services, so this issue is of critical importance for
us to get resolved asap.
Any help on this would be greatly appreciated.

Hi,
That's right, if you hit enter absolutely nothing happens, no error messages. It makes no difference if I try name or IP address - even trying \\localhost doesn't work. A few minutes later after trying, an entry appears in the SMBClient event logs as mentioned
in my original post. To me it looks like something deep within the networking operations of the OS is randomly breaking. Also, if I try to browse the network from Windows explorer, it just hangs. When I try to restart the workstation service, it just gets
permanently stuck in a stopping state and the server has to be cold booted. Once it boots up, everything is working fine again....until the next time. There is absolutely nothing appearing in the application or system event logs indicating the root cause.
I've checked and DNS resolution is working OK and I can telnet to other hosts on all the required ports.
I had originally thought it might be related to the Broadcom NICs as we've had issues with them in the past, but we switched over to use the 2012 inbox driver for them and the same issue happens. I should also mention that one server is a blade and the other
a rackmount box. Dell support have run full diagnostics on both and have come up clean, so it doesn't appear to be a hardware issue. The even more baffling thing is that we have a third server with identical spec and config that does not have the problem.
The only difference with this third server is that it is not part of a Lync pool pairing using DFS and sits in a remote location on a different LAN.
I had thought of trying to drop back to use SMB1 by disabling SMB2 and 3, but I'm not sure if this would adversely affect any other services.
This one really has me stumped.

Windows Domain Controller on Windows Server 2012 R2: Hyper-V roaming profiles not loading due to slow connection

I have racked my brain and done everything that I know to do for about two weeks now. I am setting up a new system at our fire department and I am having the worst luck with getting the workstations to login to the domain controller with roaming
profiles. It keeps telling me that the roaming profile could not be loaded because of a slow connection. These are workstations that are connected directly to the switch that the DC is connected to. I have tried multiple connections regarding
the layout (DC into the router, router into the switch). The router is a Cisco RV220W. I have two VLANS, one for public and one for private domain. The Private VLAN has DHCP turned off since I am providing it through the DC. I currently
have a connection from the Private VLAN going to the unmanaged switch that the workstations and server are plugged into.
The server is a Dell PowerEdge R420 that has 6 NIC ports (1 dual port and 1 quad port). I have a virtual switch setup on Hyper-V for an external port (let's say Card 2 Port 3) that is assigned to the WS 2012R2 Domain Controller. The DC can see
the internet fine and the workstations can connect to the shared folders on the server. I can retrieve files by just using the computer name or FQDN. The DC is also running DNS and DHCP. The DNS has the _msdcs setup from when I installed
the active directory role. I have attempted to assign static IP addresses to the workstations:
IP:                     10.0.0.80
Subnet:             255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS:        10.0.0.12
I've attempted "append the specific DNS suffix", I've "registered the connection in DNS", I've used "use this connections suffix in DNS registration".
The server is assigned:
IP:                     10.0.0.12
Subnet:             255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS:         10.0.0.12
The DNS entries have forwarders that forward to my ISP DNS servers for lookup
I've enabled and disabled DHCP, I've installed a new VM just to create another DC to make sure that I didn't goof up when I created it.
I've lost my patience with this project and am sinking fast. Can someone please offer some advice as to what I've done wrong? I've created this exact scenario at work many times but, I've never done it with Windows Server 2012. Is this
possibly something to do with the Dell PowerEdge server (Generation 12) with the SR-IOV? I am going to attempt to work on it some more tomorrow when I get over there. I think there may be an issue with the SR-IOV not being enabled on the machine
through the Dell Bios. Would the SR-IOV really cause the workstations to report a slow connection? When I login at the domain controller the roaming profiles and folder redirection work fine so, I know the GPO settings are correct. I don't
have "ignore slow connections" or any of those GPO's set. I need to get it working the correct way so, I didn't want to fool the server when there is another underlying problem. Any help that someone can offer, I am more than willing
to listen. If you need more information, please ask.
Thanks,
Jay

So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now.

On Windows Server 2012 R2 the "Show my desktop background on Start" is grayed out

Hi
As shown below, the new 8.1/2012R2 function "Show my desktop background on Start" is not available on Windows Server 2012 R2.
I have tried multiple solutions:
- Activate OS (In Win 8.1 - the feature is unavailable when Win8.1 is not activated)
- Install Desktop Experience
- Playing with the registry key "Subkey: HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Accent Entry:
MotionAccentId_v1.00
But no luck. Does anyone have a solution.
The reason why I need this is, that I am building a Remote Desktop solution, and here we want to give users the same experience as from their desktops.
Looking forward to some exciting feedback.
Regards,
Mr. Thomas

Hi,
I am trying to involve someone to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Jeremy Wu
TechNet Community Support
Jeremy,
I, too, am facing this issue.
Do we have any update on this?
With regards
With regards

Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.

Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks.

Activation windows server 2012 r2

Similar Messages

Maybe you are looking for