Active Active link with Active Passive Firewall

Hi
I am planning to migrate my Active passive links to Active Active links with a link load balancer. But the firewalls which are behind routers are planned to be in Acive-Passive.
Can we understand how the firewall will respond for the response traffic will that forward to the same interface where the request has come from.
How about the default gateway Should we have two default gateways. In that case how will this work

Raaj,
could you please share network diagram, most probably HSRP or GLBP is an appropriate solution.
Sajid Ali Pathan

Similar Messages

Help! How to e-mail a PDF (from Pages) with active web links!

I have been working on this for hours without any success! I would be so grateful for a brainy Apple wiz to help me out. I am creating a Pages document that has active web links in it. My goal is to e-mail my document with the active web links in it.
So - If I export my Pages doc as a PDF to my desktop, the links work great! However - the moment I put that PDF into an email and send it the links become inactive. Is there any way to create a Pages document with web links > Export it as a PDF > Then mail with active (clickable) links? I have tried many times without success.
If the answer to my question is no, does anyone have a tip for where I can create a PDF and mail it with active links? Will any of the Adobe programs work for this type of thing?
Thanks so much!!
Kristen

Using Pages '09 v4.2.
I just tested this. Assumption: You have the “Windows friendly attachments” checked in the attachments panel.
Your Pages document is open. The web links are active. You want to get it into Mail.
From the Pages menu bar, choose Share > Send Via Mail > PDF.
Mail will open with a compose window. Your PDF will be attached as a full view document. You see the links present in the PDF.
Now, click near the web links. This shows your PDF in blue. Now right-button click, and choose View as Icon from the pop-up panel.
Now mail it to yourself on another account that Mail can open.
You will see the web links in the PDF.
Right-button click on a link and from the pop-up menu, choose Open with Safari.
If you chose Quick Look, it would pop open the PDF and offer to open it further in your default PDF viewer. In my case, it is Adobe Reader.
If Reader opens this PDF from the Mail attachment, the web links remain active.
Does this solve your issue?

Saving as a PDF with Active Web Links

I need to save Word documents that have active web links in them to PDF files. When I save them to PDF, the links are no longer active. How can I save them with the web links in tact?

You need Adobe Acrobat to do this (the Professional version, not the free Acrobat Reader or the OS X Print to pdf function. The software is rather expensive, though. There are less expensive versions (Acrobat Elements) but these only run under Windows.
You can also use Adobe's online pdf creation service, which may be a better (i.e. cheaper) option.
Hope this solves your problem...

Linking between Activity network with Billing Document

Hi Gurus,
I have a requirement that I need to link between Activity, network with Billing Document number. By standard we can link only WBS-Element and Billing Document Number. How can I link between Activity, Network with Billing Doc. I want to develope a report for this.
Kindly help me regarding this. I need some clue regarding this.
Thanks,
Ravi

revenue can only be posed to WBS
networks are meant for cost capture and scheduling
so as per std sap what you want is not possible

Web Services Activity Insert problem with linking to child contact records

Hi - I am trying to use WS 2.0 to insert a new activity and link it to a list of contacts. I have converted this from WS 1.0. It works fine without the contact linking code but fails with the following message when linking to the contact records...
Update operation on integration component 'Activity' failed because no matching record in business component 'Action' with search specification '[Description] = "Test2"' could be found.(SBL-EAI-04403)
Here is a simplified version of the code in question...
activity2.Activity act = new activity2.Activity();
act.Url = cs.crmSessionUrl;
activity2.ActivityInsert_Input input = new activity2.ActivityInsert_Input();
input.ListOfActivity = new activity2.ListOfActivityData();
input.ListOfActivity.Activity = new activity2.ActivityData[1];
input.ListOfActivity.Activity[0] = new activity2.ActivityData();
input.ListOfActivity.Activity[0].Subject = "Test2";
input.ListOfActivity.Activity[0].Activity = "Task";
input.ListOfActivity.Activity[0].Status = "Completed";
input.ListOfActivity.Activity[0].Type = "Email";
input.ListOfActivity.Activity[0].DueDate = DateTime.Parse( DateTime.Now.ToString("M/d/yyyy HH:mm:ss"));
input.ListOfActivity.Activity[0].AccountId = "AEGA-BGV8Z9";
input.ListOfActivity.Activity[0].ListOfContact = new activity2.ListOfContactData();
input.ListOfActivity.Activity[0].ListOfContact.Contact = new activity2.ContactData[1];
input.ListOfActivity.Activity[0].ListOfContact.Contact[0] = new activity2.ContactData();
input.ListOfActivity.Activity[0].ListOfContact.Contact[0].Id = "AEGA-CCMEWM";
activity2.ActivityInsert_Output output = act.ActivityInsert(input);
Any suggestions would be great!

Try using execute instead.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:ns="urn:crmondemand/ws/ecbs/activity/10/2004"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:data="urn:/crmondemand/xml/Activity/Data">
<soapenv:Header>
<wsse:Security>
<wsse:UsernameToken>
<wsse:Username>yourusername</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">yourpassword</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<ns:ActivityExecute_Input>
<data:ListOfActivity lastpage="?" recordcount="?">
<data:Activity operation="insert">
<Subject>Test7</Subject>
<AccountId>AALA-5KC0OV</AccountId>
<Type>Email</Type>
<Status>Completed</Status>
<Activity>Task</Activity>
<data:ListOfContact>
<data:Contact >
<data:Id>AALA-5851K0</data:Id>
</data:Contact>
</data:ListOfContact>
</data:Activity>
</data:ListOfActivity>
</ns:ActivityExecute_Input>
</soapenv:Body>
</soapenv:Envelope>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<ns:ActivityExecute_Output xmlns:ns="urn:crmondemand/ws/ecbs/activity/10/2004">
<ListOfActivity xmlns="urn:/crmondemand/xml/Activity/Data">
<Activity>
<ModifiedDate>2012-06-07T01:00:09Z</ModifiedDate>
<CreatedDate>2012-06-07T01:00:09Z</CreatedDate>
<ModifiedById>AALA-583LBZ</ModifiedById>
<CreatedById>AALA-583LBZ</CreatedById>
<ModId>1</ModId>
<Id>AALA-5TG95O</Id>
<CreatedBy>Web Services Administrator, 06/06/2012 18:00:09</CreatedBy>
<ModifiedBy>Web Services Administrator, 06/06/2012 18:00:09</ModifiedBy>
<ListOfContact>
<Contact>
<ModifiedDate>2012-03-19T20:19:55Z</ModifiedDate>
<CreatedDate>2012-03-05T21:43:14Z</CreatedDate>
<ModifiedById>AALA-583LBZ</ModifiedById>
<CreatedById>AALA-583LBZ</CreatedById>
<ModId>79</ModId>
<Id>AALA-5851K0</Id>
<CreatedBy>Web Services Administrator, 03/05/2012 13:43:14</CreatedBy>
<ModifiedBy>Web Services Administrator, 03/05/2012 13:43:14</ModifiedBy>
</Contact>
</ListOfContact>
</Activity>
</ListOfActivity>
</ns:ActivityExecute_Output>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>

Hello anybody hear to solve my problem.my phone linked with developer apple id and password its factory unlock but i am unable to active it....so please please help me...

hello anybody hear to solve my problem.my phone linked with developer apple id and password its factory unlock but i am unable to active it....so please please help me...
<Email Edited by Host>

when i coneect phone to my computer for activation i promt for apple id and password for activation.and it is showin apple id like ''ad*****@gmail.com'' but it is not my apple id and i tried with my another apple id but not working i upload screen shoot from itune thanks.......

I brought an iphone 4 factory unlock and it is linked with an icloud id of previous owner, i dont even know id of icloud , 1 week ago i restore my iphone 4 n got stuck in activation screen, please help me out please?

i brought an iphone 4 factory unlock and it is linked with an icloud id of previous owner, i dont even know id of icloud , 1 week ago i restore my iphone 4 n got stuck in activation screen, please help me out please?

If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. If you cannot contact the original owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

Table Linking Activities with Activity Journal

Hello All,
I need to know the table link between the activity number and the details like material code, material description which is stored in the activity journal of the transaction type.
Kind Regards
Atul

Hi Benoit,
Thanks for the prompt reply, I have a transaction type where I have configured activity journals, in the activity journal I have entered my material no, I need to get the table link between my activity number and the material no.
I am attaching a screen shot for your reference, the first screen shot pertains to attaching the product code in the activity journal assignment block
The second screen shot pertains to entering the material code
I need to know the table link between the activity number and the product id, the above tables which you gave do not store the product details, hence please advice further.
Kind Regards
Atul

Problems with Active Directory and Windows 2003

Hello,
I'm using Mac OS X Server 10.4.9 with Active Directory bound to a Windows 2003 Active Directory Domain. I can bind successfully to the domain using the graphical interface. Then in Samba I can access shared directories using Windows users. However, after some time somehow there are problems and Windows users aren't authenticated anymore on the Mac. I've looked at the firewall and there are no denied packets from the Mac. There are two servers in the domain, all clocks are synchronized and domain information is up to date. When I unbind the Mac, I can see the machine account being deleted on both domain servers and created too on both machines when I bind to the domain.
Problems occur when I try login in using ssh or samba do I think this is a problem with the AD module.
I turned on debugging messages on DirectoryServices:
sudo killall -USR1 DirectoryService
When in Windows, using the Administrator user I try:
net use \\10.0.0.1 /user:domain\Administrator
Where 10.0.0.1 is the Mac.
In the Mac I get from
tail -f /Library/Logs/DirectoryService/DirectoryService.debug.log |grep ADPlug
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling OpenDirNode
2007-06-27 10:48:38 CDT - ADPlugin: Opening Specific Node domain.com.mx
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling CloseDirNode
2007-06-27 10:48:42 CDT - ADPlugin: Calling OpenDirNode
2007-06-27 10:48:43 CDT - ADPlugin: Opening Specific Node domain.com.mx
2007-06-27 10:48:43 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Calling GetRecordList Routine
2007-06-27 10:48:43 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:43 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:43 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:43 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:43 CDT - ADPlugin: Calling CloseDirNode
I really don't know what to do. The Windows Event log shows no messages. The link used to work and there have been no changes in the domain servers.
The key line seems to be:
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
But I don't know what that ADSEngine.mm is.
XServe G5 Mac OS X (10.4.9)

Hello.
Thanks for your reply.
I tried the net use with a drive letter with and without the /user switch. When I use a domain user domain\user1 I can't connect. When I use a user local to the XServe it works.
When I use
net use x: \\10.0.0.1\share /user:domain\user1
I get prompted for a password, but it doesn't work.
I checked the firewall and all packets to or from the mac are accepted, no denied or dropped packages.
I already went through the MS document on fw ports. Before I opened to Kerberos ports the binding failed. No the binding work OK.
Some users who were authenticated yesterday still can access files using the Windows domain accounts. It's new users trying to connect those who have problems.
This is what the Samba log.smbd log shows:
[2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2007/07/04 14:58:46, 0] /SourceCache/samba/samba-100.7/samba/source/auth/authutil.c:make_server_infoinfo3(1138)
makeserver_infoinfo3: pdbinitsam failed!
[2007/07/04 14:58:46, 0] pdbods.c:odssamgetsampwnam(2329)
odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'user1'!
[2007/07/04 14:58:46, 2] /SourceCache/samba/samba-100.7/samba/source/auth/auth.c:checkntlmpassword(367)
checkntlmpassword: Authentication for user [user1] -> [user1] FAILED with error NTSTATUS_NO_SUCHUSER
This is what the DS log shows:
2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Calling GetRecordList Routine
2007-07-04 14:58:46 CDT - ADPlugin: Search Records called in ADSWrapper
2007-07-04 14:58:46 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-07-04 14:58:46 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=user1)(sAMAccountName=user1)(displayName=user1)( mail=user1)(userPrincipalName=user1)(userPrincipalName=user1@*)))
2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-07-04 14:58:46 CDT - ADPlugin: Returning 0 Results
2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Put 0 records in Buffer for RecordList
XServe G5 Mac OS X (10.4.9)

How can we achive active/active cluster setup with Oracle

Hi Experts,
How can we achieve active/active database setup with oracle WITHOUT USING RAC.. As far as I know it's impossible (unless I'm wrong)..
We are using Oracle 11.2.0.1 64bit on Windows 2008 server. We deployed Oracle FailSafe but that's more of an active/passive solution based on a windows cluster.
The other solution we were thinking about is to use DataGuard and replication.. two servers.. the oracle instance running on one server generating logs, and the other server receive the logs and apply them to the physical standby db.. Still, this is not a real active/active setup.
So, is it possible to run 2 servers in an active/active cluster and have the oracle database in an active/active setup or have the instance running on multiple nodes (at the same time)?
Thanks

Let me give you a brief explanation of what the situation is and you can be the judge..
My client have four databases with the smallest one being 20GB and the biggest around the 35gb (SGA 750mb to 1.4gb (Tiny by DB standards) and probably on a normal day, you can run all four of them on a decent desktop).. The DBs are used to keep track of people information. Through out the year, the databases are almost sitting idle, and by idle I mean, the odd update here and there, the odd report..etc. No hard real processing of any sort. Two days of the year (end of year) we have all the operators consolidating records and what's not and they will be pounding away entering data and updating the tables - with hourly reports that goes to 3rd parties. The client expects a 99.99 up time and availability during those 2 days.
Now, tell me, How can I justify using RAC and spending hundreds of thousands of dollars in licensing and what ever extra costs introduced by the complexity of the environment for the above scenario knowing that I don't have any real use for RAC for 363 days of the year; and we MIGHT need it for 2 days of the year? This is the dilemma we're facing.
Thanks
Edited by: rsar001 on Sep 3, 2010 9:42 AM

Issue with Active Directory User Target Recon

Hi ,
I am facing an issue with Active Directory User Target Recon
My environment is OIM 11g R2 with BP03 patch applied
AD Connector is activedirectory-11.1.1.5 with bundle patch 14190610 applied
In my Target there are around 28000 users out of which 14000 have AD account (includes Provisioned,Revoked,Disabled accounts)
When i am running Active Directory User Target Recon i am not putting any filter cleared the batch start and batch size parameters and ran the recon job .Job ran successfully but it stopped after processing around 3000 users only.
Retried the job two three times but every time it is stopping after processing some users but not processing all the users.
Checked the log file oimdiagnostic logs and Connector server logs cannot see any errors in it.
Checked the user profile of users processed can see AD account provisioned for users
My query is why this job is not processing allthe users.Please point if i am missing some thing .
thanks in advance

Check the connector server load when you are running the recon. Last time I checked the connector, the way it was written is that it loads all the users from AD into the connector server memory and then sends them to OIM. So if the number was huge, then the connector server errored out and did not send data to OIM. We then did recon based on OUs to load/link all the users into OIM. Check the connector server system logs and check for memory usage etc.
-Bikash

Single Signon and Integration with Active Directory

Hi,
We have a requirement to integrate Active Directory with SAP and implement Single Signon solution. Our Active Directory is running on Windows 2003 and we are having systems 4.7 , ECC6.0 which run on Linux OS in our landscape.
Can anyone of you help me by answering following questions
1. Is there any need of any third party solution(tool) to integrate Active Directory and SAP and activate single signon?
2.Is there any difference in integration from SAP 4.7 and ECC6.0 of SAP on Linux OS with Active Directory ?
3. If possible please share any documents or links on above issue.
Suitable answers will be rewarded with points. Thanks in advance for your help
Regards
Murali

> Thank you very much for providing me the link. But the document on link seem to be in German. Can you please let me know how to get English version of this document.
I'm sorry, you'd have to ask Realtech for that document in English.
Basically you can follow
http://osdir.com/ml/encryption.kerberos.general/2004-11/msg00007.html
Markus

GL account linkage with activity group for AVC- Funds management

Hi,
I have activated (BCS) funds management in my system. My client wants that system will give error message for some expense GL accounts and for other expense GL accounts it will only give information message.
For that i have created new activity group for AVC but i have no idea how we can link GL accounts with activity group for AVC.
Request immediate help.
Thanks in advance.
Manisha

Hi,
The correct way to deal with this is not with activity groups, but with tolerance profiles. Create tolerance profiles with error and warning messages accordingly and then create a tolerance derivation strategy, which on the basis of commitment item, will derive the relevant profile.
Regards,
Eli

Printing Word document as pdf files whilst retaining active internal links

Hi,
I have a Word file (Word 2004 for Mac Version 11.3.5) with active links to various sections within the document.
However, when I print this as a pdf file all the links become inactive. Is anyone aware of a way to prevent this?
Kind regards,
Damon

I tested this problem and got some interesting results. First of all, I created a document in Word 2004 (11.3.5) with two links, one to an external web site and the other to another Word document on my Mac. I then printed the file to pdf and opened the doc in Preview. Neither links were active, although as you have seen they look like a hyperlink. Opening the same document in Acrobat 8, the external link works but the internal link is still not active.
Next, I printed the Word document via the Adobe PDF 8.0 driver. The same result occured as above. The external link was active in Acrobat but not Preview, while the internal link was no good for either application.
I did some searching. Mactopia has no mention of this problem. There is a posting on Macosxhints with the same problem, but no fix. So unless someone else out there has an answer you may be out of luck for your internal link...

New LabHSM Toolkit - Agile development of complex event-driven maintainable LabVIEW applications with active objects / actors based on a universal Hierarchical State Machine / statechart template.

Dear Fellow LabVIEW programmers:
Most of the systems you deal with are reactive. It means that their
primary function is constant interaction with their environment by
sending and receiving events. But most likely, they can have something
happening inside them too, even when they are not processing messages
received from outside. So, such systems have to continuosly react to
external and internal stimuli. Right? Moreover, most likely, they
consist of subsystems that are reactive too and, in turn, can have
their own "life", to an extent independent from other parts (with
which they still communicate, of course). Reactive (event-driven)
systems are more naturally modeled with active objects. So, why then
should we try to model and code them with GOOP and its passive
("dead"!) objects?
"Flat" State Machines have been known for decades to have severe
limitations. It's been more than 20 years since Dr. Harel invented
Hierarchical State Machines (statecharts) to fight those limitations.
Then why does NI still tout the same old good Moore FSM as the
ultimate tool for event-driven programming in LabVIEW in its $995
State Diagram KIt?
The LabHSM toolkit we are happy to present, makes it possible to
easily create and then maintain complex event-driven applications in
LabVIEW as a collection of HSM-driven active object VIs using a higher
level of abstraction and agile software development methodologies.
These active object VIs are created based on a universal Hierarchical
State Machine ( HSM or statechart ) template. So. all your code looks
similar regardless of its functionality!
We all love just jump to code, right? However, to be good boys, we
need to do design first. Then implement it in code. If the logic is
modified we need to redo the design first and then redo the code. When
using LabHSM where behavior information is abstracted into a separate
HSM data file editable with a supplied editor, there is no need for
coding separate from design any more. The modified behavior becomes
code automatically as soon as the HSM file is saved. Design is code!
The implementation basically follows Dr. Samek's Quantum Programming
paradigm. (see http://www.quantum-leaps.com). However, as already
mentioned, LabHSM stores the behavior information in a file separate
from the code itself. It also adds state dependent priorities to
events, a separate queue for public events/messages, and, of course,
some LabVIEW specific code like capturing front panel user events and
putting them into the private Events queue. Communication and
instantiation functions are also rather specific for LabVIEW.
It is available for UNLIMITED PERIOD trial. Please visit
http://www.labhsm.com for details and download. The site also contains
references which you may want to check to learn more about
hierarchical state machines and active object computing.
Since this is our debut we will appreciate any comments and
suggestions. Our contact information is available on our site, of
course.
Have a G'day!

Symtx is currently hiring the following position. Please contact me if interested.
Amy Cable
Symtx, HR
[email protected]
Symtx, the leading supplier of functional test equipment, hires the brightest & most talented engineering professionals to design & manufacture complex custom electronic systems for advanced technology leaders in the defense, aerospace, communications, medical, transportation & semiconductor industries. Symtx’ challenging & dynamic work environment seeks to fill openings with highly qualified electronic engineering design professionals.The ideal candidate will be responsible for defining the requirements, software design and code development, and integration of test control software for custom functional test systems. Candidate should be familiar with data acquisition concepts, instrument control, complex test, measurement and calibration algorithm development and definition and implementation of control interfaces to hardware. Prefer familiarity with instrument control via GPIB, VXI, MXI, RS-232 desirable. Requires BS/MSEE and 3 -7+ yrs of experience in one or several of the following test applications in a Windows NT/2000/XP environment using Labwindows CVI, TestStand, Labview, Visual Basic, C++ and knowledge of RF systems is a plus. Job responsibilities will include software design, development, integration, team leadership, and interfacing with customers( includes PDR’s & CDR’s).

Active Active link with Active Passive Firewall

Similar Messages

Maybe you are looking for