Active and use of version management

Hi,
Please I can able to active versin management fro PR, but even I done some configue for PO but I can nt able to get different versions in PO. Pl suggest and also suggest how to use this version management in PO print as revision and also if we analyze CDHDR tabel then version shows -000 only, not updating correct version.
Regards,
Yagnesh Bhatt

Hi ,
>
yagnesh bhatt wrote:
> Hi,
> yes that is the option but let me know if any standard configue is available or not. and pl clarify Status of versions in PR:-
> Everything approved by buyer
> Withdrawn by requester
> Partially approved by buyer
> Rejected by buyer
>
>
> when each of this will be updated?
>
> Regards,
> yagnesh
This is the status available in PR.
Regards,
Yagnesh

Similar Messages

My iPhoto starts up and freezes. I have tried rebuilding and using iPhoto Library Manager. I have an iMac running 10.7.3. It was working before recent updates by Apple. How can I troubleshoot?

My iPhoto starts up and freezes. I have tried rebuilding and using iPhoto Library Manager. I have an iMac running 10.7.3. It was working before recent updates by Apple. How can I troubleshoot?

Thank you. Might be a bit more than 50 but close.
Date/Time:       2012-04-09 12:46:07 -0400
OS Version:      10.7.3 (Build 11D50d)
Architecture:    x86_64
Report Version: 9
Command:         iPhoto
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Version:         8.1.2 (8.1.2)
Build Version:   8
Project Name:    iPhotoProject
Source Version: 4240000
Parent:          launchd [142]
PID:             980
Event:           hang
Duration:        1.81s
Steps:           19 (100ms sampling interval)
Pageins:         0
Pageouts:        0
Process:         iPhoto [980]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Architecture:    i386
UID:             502
Thread 0x50630
User stack:
    19 ??? (in iPhoto) [0x3172]
      19 ??? (in iPhoto) [0x124b80]
        19 NSApplicationMain + 1054 (in AppKit) [0x9c5eb261]
          19 -[NSApplication run] + 911 (in AppKit) [0x9c357675]
            19 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113 (in AppKit) [0x9c35b306]
              19 _DPSNextEvent + 678 (in AppKit) [0x9c35ba9c]
                19 BlockUntilNextEventMatchingListInMode + 88 (in HIToolbox) [0x90129356]
                  19 ReceiveNextEventCommon + 381 (in HIToolbox) [0x901294e7]
                    19 RunCurrentEventLoopInMode + 318 (in HIToolbox) [0x9012217f]
                      19 CFRunLoopRunInMode + 120 (in CoreFoundation) [0x99dce328]
                        19 CFRunLoopRunSpecific + 332 (in CoreFoundation) [0x99dce47c]
                          19 __CFRunLoopRun + 1112 (in CoreFoundation) [0x99dcec68]
                            19 __CFRunLoopDoSources0 + 246 (in CoreFoundation) [0x99da4d96]
                              19 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15 (in CoreFoundation) [0x99da53df]
                                19 __NSThreadPerformPerform + 503 (in Foundation) [0x9ac96e40]
                                  19 -[NSObject performSelector:withObject:] + 65 (in CoreFoundation) [0x99e2dde1]
                                    19 ??? (in iPhoto) [0x50792e]
                                      19 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92 (in Foundation) [0x9ac45012]
                                        19 _CFXNotificationPost + 2776 (in CoreFoundation) [0x99de3a38]
                                          19 ___CFXNotificationPost_block_invoke_1 + 275 (in CoreFoundation) [0x99e18cb3]
                                            19 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49 (in Foundation) [0x9ac59e25]
                                              19 ??? (in iPhoto) [0x5c2a86]
                                                19 -[NSLock lock] + 185 (in Foundation) [0x9ac4c826]
                                                  19 __psynch_mutexwait + 10 (in libsystem_kernel.dylib) [0x93b74876]
Kernel stack:
    19 hndl_unix_scall + 281 (in mach_kernel) [0xffffff80002d7f39]
      19 unix_syscall + 472 (in mach_kernel) [0xffffff80005ca448]
        19 psynch_mutexwait + 1403 (in mach_kernel) [0xffffff80005a043b]
          19 ksyn_block_thread_locked + 67 (in mach_kernel) [0xffffff800059a7d3]
            19 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f39b]
              19 thread_continue + 1661 (in mach_kernel) [0xffffff800022f11d]
                19 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c0939]

I purchased iphone 4 from UAE and activated and using in India, but FaceTime application is not available. how to get FaceTime ?

I purchased iphone 4 in UAE and activated and using in India. But Facetime application is not available. How do i get it?

You don't. Facetime is not available on UAE iPhones, regardless of where activated or used.

Activating and using 0CUSTOMER Hierarchy extraction in R3

Dear Expert,
Could anybody explain me about Activating and using 0CUSTOMER Hierarchy extraction in R3 and then extract to BW systems from R3 in step by step?
Points will be assign granted
Regards
Sanjiv

You can load Hierarchies (sets) from R/3 in the same as other Master Data. Just you need to create Hierarchy DataSource using Tcode BW07. Where you have to give the name of the table and field on which you created Hierarchy iin R/3.
Also there are many standard avilable datasources also for hierarchy for which you can load Hierarchy Directly.
Here are the step by step procedures:
Hi,
If you are using standard infoobject and you want to load r3 hierachy you dont have to configure any additional thing in order to load it in BW.
The Steps are:
1)Activate the hierarcie datasource in R3
2)Replicate it in BW
3)Assign the datasource for an Infosource, and make sure you select the hierarchie datasource.
4)Active the Infosource
5)Create Infopackage
6)Select the desire hierachie in the infopackage(if you dont see it, click on Available Hierarchies from OLTP and select it)
Regards
Asigns point if useful please
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6729e07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3d/320e3d89195c59e10000000a114084/frameset.htm
Re: Hierarchies

How to retrieve comments from one OfficeTask activity and use them in another OfficeTask activity for Multi level Approval sequential Workflow

I'm designing a sequential site workflow using Visual Studio 2010 for Project Server 2010. In my case, I have following 6 stages in the workflow:
1. InitialProposal Stage
2. Approval Stage1 -- Needs approval from Approver Project Security Group Members1
3. Rejection Stage
4. Approval Stage2 -- Needs approval from Approver Project Security Group Members 2
5. Execution Stage
6. Completed Stage
Requirement is workflow should move to Approval stage2 from Approval stage1 if approved by all members of Approver Project Security Group1and it should move to Rejection Stage even if a single member rejects it.
Workflow should move from Approval Stage2 to Execution Stage if approved by all members of Approver Project Security Group2 and it should move back to Approval Stage1 on rejection by a single member of the group.
I'm using inbuilt PSWApproval content type and OfficeTask activity for creating approval task for the group members at both stages.
On task rejected in Approval stage2, task will be assigned again to Approval Stage1 and I want to show comments given by members of Approver Project Security Group2 to the members of Approver Project Security Group1 with this assigned task
but I'm not able to retrieve comments from officeTask activity.
My question is where exactly these comments are saved? how can we retrieve them and use them in another officetask activity? If this is not possible then what is the possible solution for meeting above mentioned business requirement?

Hi Paul,
Thanks for your suggestion.
By comments field I'm assuming OfficeTask.Comments field. Problem is, this field is always null. I tried accessing this field in CheckExitCondition activity as well as in OnTaskCompleted but in both the cases, it was null only(I wrote comments while approving
the task).
I used a code activity within OnTaskCompleted activity and following code for accessing Comments and Description fields:
public string officeComments;
public string officeDescription;
private void TaskCOmplete(object sender, EventArgs e)
CodeActivity Sender = (CodeActivity)sender;
Microsoft.Office.Workflow.Actions.OfficeTask ofctask1 = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask;
officeComments = ofctask1.Comments;
officeDescription = ofctask1.Description;
Please tell me if I'm doing anything wrong here, I'm very new to Workflows. Also, do I need to set any specific property of officeTask for retriving comments?
Thank you

Firefox will not open - I have reinstalled and used the profile manager solution. It was fine earlier today. IE working fine.

I tried the suggested solutions including the 'clean install', any help would be most appreciated. I've used the Profile Manager, which is not much use when the browser won't even open to test it. I've also reinstalled twice, installed updates and restarted numerous times.
Firefox does do this on occasion, but usually sorts itself out - not this time.
Help!

You should check for malware or go back into regular mode and see if temorarily disabling your antivirus helps.
You can try these free programs to scan for malware, which work with your existing antivirus software:
'''Scan with all.'''
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.

Correlation in bpm - Difference between activating and using correlation

Hi
I would like to know the difference between between activating a correaltion and using a correlation in a step.

Correlation is used when you have multiple recieve steps in the BPM to differentiate each file.
Consider your recive step is executed and the BPM is active waiting for the other file to comne in.
Before the next file comes in , if another BPM is activated becuase your recived recive1 message. Now, when the next message comes in , how does XI know which BPM instance is to be used.
Correlation is used in these cases. to corelate the messages.,
some people name their Correlation as correlation in IP. So it means using the correlation 'correlation'.
its like me creating a message interface by the name 'messageinterface' so finally i am using the message interface messageinterface !!!
Check this weblog ..
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
to understand it refer -
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
Also Ref checklist on when it is needed -
http://help.sap.com/saphelp_nw04/helpdata/en/6d/94364296f1b26be10000000a155106/content.htm
Thanks !!

Can IPhone be activated and used outside the US on other networks?

Dear all,
I was wondering if the iPhone can be launched and activated to operate outside the United States, any other country using their networks or its just exclusively by AT&T..?

You have to activate the iPhone on the AT&T network. However, you can ask AT&T to enable international roaming and use it in other countries. If you do not have international roaming enabled, you can still do email and internet browsing when you are connected to wifi in other countries, but no phone service or sms.
Other users report spotty international roaming performance for phone calls and sms. Also, international roaming for phone and data (other than on wifi) is extremely expensive.

Adobe CS2 Installation, activation and using

Adobe Sucks! Now that I have got that out of my system! Yes it is my Fault! Here is the problem.
Adobe makes great products that are over priced. (Creative Suites-$2500.00 Retail even upgrades)
CS2, Yes it is an older version. Still is a fine product. Original computer that had CS2 installed, finally bit the dust and went to Electronic waste recycle. New computer (Windows XP Sp3-Got Windows XP just to run Adobe CS2)
Installation of SW completed wiht no errors. Installation activation complete with no errors. Run In Design - "Personalize Your Software" window appears and asks for input of serial number. Input serial number (as on Box, CD, etc.) error message states "Serial number entered is not Valid. Please check and re-enter" It is correct and valid serial number. program closes. When runing Photoshop first screen appears with error box stating "Photo Shop can not find valid Serial Number" Same serial number entered during installation and activation of software package. Called Adobe on phone - on hold for 1.5 hours listening to elevator music. Contacted on line chat for help. They said that the problem could be resolved only on the phone. Called on phone again. This time was able to talk to Adobe Technical Rep. All I heard was "CS2 is to old and not supported by Adobe". Buy a new package ($2,500.00) again. No discount for upgrade. No on line Adobe support, No phone Adobe support, Sorry for the inconvience Adobe Support. Can anyone help make Adobe CS2 work? or Do I throw it away and write off Adobe as a Software company and find someone else?

Jungle Rot please see Error: "...user name, organization, or serial number is missing or invalid..." when you start Photoshop (CS2 on Windows) - http://helpx.adobe.com/photoshop/kb/error-user-name-organization-or.html. There are several steps which should help you solve for this issue.

New bridge doesn't open in 10.6.8 - anyway to uninstall and use previous version

Have updated bridge without realising it won't run on Mac os 10.6.8. Don't want to upgrade particular machine to Mavericks yet. Is there anyway to uninstall / reinstall previous version?

I contacted Adobe via chat and telphone. They are saying that it is the end of the line for 10.6.8. They said you can uninstall the recent update ... then they said you cannot.

Implement and use Oracle Learning Management & iLearning

Dear All,
I am very new to Learning Management module in oracle erp. I would like to request if any one out there could provide me with step by step guide to implement the OLM module.
Brgds,
Jenny

Hi, Jenny!
It's difficult to provide a step-by-step guide without having details of your requirements, but here are some online resources that may be helpful:
Oracle's Implementation Guide
Synergy Codeworks Unofficial Guides to Oracle Learning Management
How-To Articles / Blog Posts related to OLM
If you have specific questions that you would like answered, I'd be happy to try and provide recommendations / point you in the right direction.
Best,
Anne
Anne Saulnier | Synergy Codeworks, LLC
[email protected]
877-487-9637 ext 87

Can I download and use TWO versions of Foxfire at once? I teach online, using Blackboard & my university requires me to use Firefox 3.6 for Blackboard to fully function, but want to use the latest version for personal use.

Is it possible to download the latest version, while still keeping the 3.6 version on my computer as well? I use Windows XP – thanks in advance for any help.

Hey dwebster,
You might want to consider running the older version [http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 on a USB Stick with PortableApps]. That way you'll still be able to run the latest version for your day to day activities.
Hopefully this helps!

I receive Error code: ssl_error_bad_mac_read on secure Blackboard website (online school work)? I am on a Mac and using FF version 3.6.12? It's starting to interfere with my work please help!

This is getting out of hand and starting to affect my work and quizzes. Please tell me this is something that can be easily fixed? I didn't have the problem til about 2 weeks ago.

bump, anyone?

You can't open photo library using this version of iphoto. you have made changes to your photo library using a newer version of iphoto. please quit and use the latest version of iphoto

you can't open photo library using this version of iphoto. you have made changes to your photo library using a newer version of iphoto. please quit and use latest version of iphoto. iphoto 11 is installed.

This is a message you got?
If so, as your post isn't clear, it may be a bogus message caused by a corrupt database.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Working with version management and promotion management best practices BO 4.1

Hi Experts
I wondered if anybody knows if there is a document or something about best practices to work with the version management and promotion management in BO 4.1?
Our Environment includes two servers. The first one is our development and test server. The second server is our prod system.
Now on the dev server we have basically two folders called dev and test. We control access to them with a right system based on the folder structure.
My question now is how you would work in this scenario (third server is not an option). Main target is to have as few reports as possible. Therefore we try to work with the version management system and only have one version of each report in the dev folder of the cms. But this is where problems start. Sometimes the newest version is not the version we want to publish to the test folder or even prod server.
How would you publish the report to the other folder? Make a copy of the concerned report (transport to the same system via promotion management is not possible). Also how would you use the version management in regards to the folder structure? Only use version management in dev folder and export reports to test folder (out of vms control) or also use vms in test folder and how would that work?
Further more I’d be interested in learning best practices with promotion management. I found out that the promotion of a report that doesn’t exist in prod doesn’t make any problems. But as soon as an older version already exists there is only partial success and the prod folder gets renamed to “test”.
Any suggestions on how to handle these problems?
Thank you and regards
Lars

Thank you for your answer.
So you are basically proposing to work with the vms in the dev folder and publish the desired version to the test folder. And the test folder is out of version control in this scenario if I understood you correctly (like simple data storage)?
And how would you suggest promoting reports to the prod system? Simply by promoting the
desired version from dev folder directly to prod? This would probably lead to inconsistence because we would need to promote from dev system to test and dev to prod instead of promoting a straight line from dev over test to prod. Furthermore it would not solve the problem of the promoting result itself (A new folder called dev will be generated in prod but the report gets promoted to the prod folder if there was no report before).
Thank you for the link. I came across this page just a few days ago and found also lots
of other tutorials and papers describing the basic promoting process. The promoting process in general is clear to me but I wondered if it is possible to change some parameters to prevent folder renaming for example.
Regards
Lars

Active and use of version management

Similar Messages

Maybe you are looking for