Active area is getting closed as soon as you click anywhere during Inplace editing

During inplace editing of Title component , if I double click at the the component
it will open orange color active area and if I click inside the active area  it will remain  there and it will close only if I click outside the active area.
But now when i am making a composit component which statically include two  title component and for inplace editing to work node should be present so i have created cq:template node which make two node , one for each title component. Now when I double click on any one of the title component then it is opening orange color
active area for inplace editing and i am able to do it but active area is getting closed as soon as i click anywhere, be it inside the active area or outside the
area, ideally it should close only when i click outside the active area. does anybody any idea on it?

Hi John,
I am using the web version. I am getting this error in Java version 7. I just tried in another machine with Java version 6 and I was able to add the member without any issue.
Your question answered my question :-) . Thanks a lot.
Is that meant that I should not use Java 7.

Similar Messages

  • Using Numbers, I set up a spreadsheet grid but it disappears as soon as I click anywhere. How can I keep the grid?

    Using Numbers, I set up a spreadsheet grid but it disappears as soon as I click anywhere. How can I keep the grid?
    I have:    iMac with OS 10.10.3;   Numbers 08 ver 1.0.3

    Hi Bernard,
    This may help. Numbers tables can have Grid Lines (Format Panel > Table > Grid Lines)...
    ... and Cell Borders (to change all cells, select the whole table by clicking on the "bullseye" top left) then Format Panel > Cell > Border > select a Border Pattern and Style
    1 pt Borders (my preferred default):
    They don't disappear when I click away. Also, the borders show up well when I post a screen shot to this forum .
    Regards,
    Ian.

  • Process Orders are not getting closed-- Unsettled Variances; Balances exist

    Hello Gurus,
    We have a problem when we are trying to close process orders in Release 4.6C; We are unable to close those orders and the error messages would be variances are not settled and balances still exist.
    When we try to modify the periodic settlement in process order settlement rule it gets grayed out and wont let us do any modifications. Some body suggested that we have to make the settlement rule to FUL and then try to close but it never works. It's a problem for quite sometime, any help would be worth more than an appreciation.
    Thanks,
    Ramana

    Hi Ramana
    You need to more specific on the errors and the description of the process where you are finding the problem
    Eloborate your problem like what is the settlement type now,  whether you have done the variance calculation, what is the status of the order now (TECO, DLV etc.,)
    Make the process order in TECO or DLV, calculate the variance calculation and settle the order.
    Regards,
    Suraj

  • Getting new gear soon, what you think.

    Hi All,
    Also posted in the nForce forum.
    I will be buying the following components very soon and would like to know if there is any problems using the other component in my old system (found in signature below).  Also what chipset/motherboard is better (VIA K8T800 Chipset or nVidia nForce3 250 Chipset)
    MSI K8N Platinum nForce3 250 (Socket 754) Motherboard.
    or
    MSI K8T Neo-FIS2R (Socket 754) Motherboard.
    and
    AMD Athlon 64 3000 (Socket 754) - Retail.
    Kind Regards,
    Andrew

    pehapse you can get a better deal on the fisr, as it is the older of the two.
    if your a non oc'er either should be fine.
    they have gotten better but, theses boards like lots of 12v power, and can be picky about ram, so before you finish bying parts do some research there.
    if you can wait yes the 939's are comming..so is pci express, ddr2, and etc etc.
    i really wanted to wait before replacing my notebook, but i couldn't and had to buy a new one early anyway
    ....but 939's are right around the bend, chips are there..i am guessing the mobo'sill be soon as well  

  • IOS4 - Folders get destroyed as soon as you SYNC

    Just upgraded my 3GS to iOS4 and created some folders to store various apps. All created lovely, and then I made the mistake of SYNCing to iTunes. Immediately all of the folders that I'd created were destroyed, putting all of the apps back over multiple screens again. So I disconnected from iTunes, and tried again... recreated all the folders, and re-SYNC to iTunes... exactly the same thing happened!
    Great I can create folders, but as soon as I sync the iPhone, they're deleted!
    What is the point of that Apple???
    Message was edited by: FreakyBeanz
    Message was edited by: FreakyBeanz

    Sorry to be dense but I haven't figured out how to do the folders yet. Anyone want >to tell me the process since Apple didn't provide directions with the update?
    There are lots of resources online, such as:
    http://gizmodo.com/5568954/the-complete-guide-to-using-ios-4?utmsource=feedburner&utm_medium=feed&utmcampaign=Feed:gizmodo/full(Gizmodo)

  • Getting new gears soon, what you think.

    Hi All,
    Also posted in the VIA64 forum.
    I will be buying the following components very soon and would like to know if there is any problems using the other component in my old system (found in signature below).  Also what chipset/motherboard is better (VIA K8T800 Chipset or nVidia nForce3 250 Chipset)
    MSI K8N Platinum nForce3 250 (Socket 754) Motherboard.
    or
    MSI K8T Neo-FIS2R (Socket 754) Motherboard.
    and
    AMD Athlon 64 3000 (Socket 754) - Retail.
    Kind Regards,
    Andrew

    Hi
    The barton you are using with the KT7, is quite fast, I have the same system side by side with my AMD 64 3200+, the 3200 is 'sharper', but I wish I had gone with the 3400,, and now a 3700.   The new 940 pin CPUs are being developed to be a double processor, piggy backed I think, might be worth the wait. Soon.
    jocko

  • Component script component has no inputs, or all of its inputs are already connected to another outputs. You may be able to edit the components and add new inputs to it.

    I keep getting this error below.
    I did some research online (I always do before I post here).  So, this makes no sense whatsoever.  The Flat File Source is absolutely, completely, and totally linked to the flat file.  I can't make it any MORE linked.  I don't know what
    this things wants, but this is the second time I've attempted to build this project, and this time, just like the first time, it's giving me nonsense errors, which make this impossible to debug.  Something that should take a couple of
    minutes to develop, easily takes days. 
    Any idea what could REALLY be wrong?
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

    This is the work of the devil.
    I'll delete this whole project and go do something else for a while.  There's only so much SSIS that I can take in one day, and it's not very much.
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

  • Is anyone else's itunes freezing as soon as you click the mouse?

    Ive been opening and closing my itunes for the last hour. it opens and i go to select something and it freezes... GETTING SOOOOOO ANNOYED. ive restart my computer twice and still nothing. i go to itunes support and that freezes too!

    Hello olddjjim,
    It would be impossible to use iTunes if it froze after just one click, so I would be concerned about that too.  I found an article that has steps for isolating and troubleshooting issues with iTunes freezing on Windows Vista:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Closing a JFrame when you click on another JFrame...

    Hi,
    I was hoping someone could help me.
    I have a main application, which assigned to one of my buttons is a new instance of another class which loads up another GUI. What i wish to do is when the user pushes this button and loads up the new GUI, i want this new GUI to close automatically when the user clicks back on to the main application GUI.
    Is this possible???? I have tried searching for a solution, however I have hod no luck :(
    If anyone has any suggestions please let me know, thank you!
    Claire
    x

    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class Test2 extends JFrame {
      public Test2() {
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        Container content = getContentPane();
        JButton jb = new JButton("New Frame");
        content.add(jb, BorderLayout.SOUTH);
        jb.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent ae) { showFrame(); }
        setSize(300,300);
        setVisible(true);
      private void showFrame() {
        JFrame jf = new JFrame("I am new frame");
        jf.setBounds(300,300,200,200);
        jf.getContentPane().add(new JButton("I am button"));
        jf.setVisible(true);
        jf.addWindowListener(new WindowAdapter() {
          public void windowDeactivated(WindowEvent we) { ((JFrame)we.getSource()).setVisible(false); }
      public static void main(String[] args) { new Test2(); }
    }

  • Why SO Header not get closed automatically after all SO lines get closed?

    Hi all :
    Do you know the reason, why some SO Header still as Booked Status, even All the SO lines are already closed ?
    If I see the Workflow status the SO Header is in Status = Deferred and Activity = Wait
    And I can close it manually if I rewind the Activity in the Workflow, but I want to know why the SOs not get closed automatically.
    Thank you in advance
    Edited by: Daniel on Jan 18, 2011 8:41 AM

    Have you scheduled the concurrent request to use Workflow Background Processor to Process OEOH ? What is the frequency? Has it run after the lines got closed?
    Also, check the value of the WAIT attribute in the OEOH workflow? By default, it is set to close headers at the end of month.
    For more detail please see Note:141919.1 on Metalink.
    Also refer to metalink document # 397364.1 which details how to change the WAIT attributes.
    Hope this helps,
    Sandeep Gandhi

  • ADD ONS WINDOW AND OPTIONS WINDOW DOESNOT GET CLOSED

    AFTER WORKING OR ON COMPLETION OF WORK WITH ADD-ON OR OPTIONS, WINDOWS ARE NOT GETTING CLOSED ON CLICKING ON OK BUTTONS

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Images from KM are not getting displayed in EP

    Hi All,
    I am using EP7.0 SP11.When I run the portal, the images are not getting displayed. When I right click on the * mark and click on Show picture, then also its not appearing.
    Location of the Images that I received from EP is mentioned below.
    http://hostname:port no./irj/go/km/docs/documents/HP_Images/Image_123.jpg
    Images are available in the location in the below mentioned path as .jpg files:-
    http://hostname:port no./irj/go/km/documents/HP_Images/Image_123.jpg
    Difference in both is a DOCS folder missing in between........
    Is this is the reason for the image not getting displayed?
    Anything more has to be done in KM part to display these images?
    May I know how to solve this issue??
    Regards,
    Athulya

    Hi,
    the right path look like this: /irj/go/km/docs/<path_to_document>.
    You may have to check you URL generator service settings. Here:
    Configuration - Content Management - Global Services - URL Generator Service(advanced section)
    and then have a look for example for the following values "Content Access Path:" and "Viewer:" normally they both have same value "/irj/go/km/docs".
    Hope that will help.
    best regards,
    --epexpert

  • Con Gen : Token Values are not getting replaced

    Hi All,
    We are on E-Sourcing 5.0 and whenever we are trying to generate a contract from master agreement,
    the token varibles are not getting replaced.
    I looked into contract generation logs and found that the token values are null..but while creating the contract it is able to find the various tokens and token values..
    Why token values are not getting replaced even though its value exists?
    Please guide me...
    Thanks and Regards,
    Himanshu Sharma
    Edited by: HImanshu Sharma on Apr 20, 2009 8:50 AM

    Hi Kamalakar,
    Thanks for replying..
    1. Yes I am using standard tokens like <%Agreement.EffectiveDate%>,<%Agreement.VendorName%>..
    2. I have checked that tokens have values..
    3. Attributes are not hidden..
    I am able to see values on the "Confirm contract document variable data" page but when I click next, it gives error in the "processing request" page.
    By going through the contract gen web service I found that the values are not getting passed..
    Can you please tell me what could be the reason..
    Thanks and regards,
    Himanshu Sharma
    P.S. Please tell me how to upload file.

  • Will you recieve your iPod sooner if you order by phone?

    I heard that you will get your iPod sooner if you order by phone rather than online because of processing delays. Anyone know if this is true or not? Thanks.

    Im really not sure, i suggest gettin it from the apple store, i ordered my 5g online 10/17 and on 10/19 was still porcessing called my apple store b4 and they said they didnt have it, called back on the 10/19 out of curiosity and they now have a "signifcant amount" in stock as i was told. Immediately cancelled online order and went to the apple store later that day and got my 5g, goin on 3 days now 1567 songs, 14 Music Videos, 1 Tv Show (Prison Break S01E01). And still growing, front screen still has plastic, and back has 4 hairline scratches already(not noticeable), awating invisble sheild. Whats funny about scratches you have no idea when or where it happened no matter how hard you try and take care of it.

  • Does anyone know how and where to get the software the creates a ripple effect on the screen when you click you mouse?

    I have been searching for the download, or software which creates a ripple effects or waves when you click anywhere on screen with the mouse pointer. Does anyone have any ideas? Thanks!

    Waves
    Your screen gets liquified with Waves, which creates a rippling radius around your cursor. Drop a rock in to watch your screen undulate and shimmer, without any nasty chemical aftereffects. You can rock the boat just a little, or hang ten until you're seasick with the wavelength options.

Maybe you are looking for