Active area not lined up with link

Hi,
At jeffreykorst.com, there are links to a photography section and a magic section. In Safari (2.04) the active area of the link is below the text. In Firefox (3.01) it lines up correctly.
Any ideas?
Thanks very much,
Jeffrey

Safari uses a JavaScript to create a canvas. That's the area you see in Safari and not in Firefox because Firefox does not support that JavaScript.
It's the outline around your name in the second image that's blocking the link. Did you move that area to the back.
Here's a sample page to replicate the problem:
http://www.wyodor.net/Overloop/JK.html
The caption says it all.
In Safari the Photography link does not work. In Firefox it does.
But when both textboxes are moved to the front they work. And while in iWeb, hovering the mouse over the link you'll see the color change.
Also note the difference between hyperlinking the TEXT and hyperlinking the TEXTBOX. MSIE does not respond to hyperlinked TEXTBOXES.
Isn't iWeb supposed to look the same as in a browswer?
It should. But in iWeb you also see the layout and all that stuff. In the end it's in the browser where everything is displayed. With all the anomalies you now encounter.
Never trust what you see.

Similar Messages

CProjects - DMS integration:26 036 You are not authorized for with doc.type

Hi Experts,
I need to use cProjects integration with DMS. When I try to create a link to an existing document I find the following error:
26 036 You are not authorized for with document type DRW
My user has authorization to the doc type in the DMS system (linked by RFC to cProjects system). I also have defined the object link in the document type.
Do you know which configuration may be missing?
Thanks in advance!
Neil

Hi Niel,
How is the RFC connection established between DMS and cProjects system? Do check the authorizations of the RFC user through which the connection is established.
Regards,
Vivek Pandey

Number fields not lining up with heading.

I add a number field to my report.
The heading and field are right justified and lined up using a guideline.
When I preview the report, the number and heading are not lined up.
Any ideas? Thanks! Linda

Greetings Linda, if you are having problems with the guide lines you better remove them and align the objects manually or you can make use of grid and snap the objects to the grid. These options are available in u201Cviewu201D menu. I hope this solves your problem.

Sales orders from CRM are not getting blocked with credit check

Hi All
I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
Thanks in advance for looking into this

Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks.
Orders created via CRM will not have transaction code set (SY-TCODE).

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address b

How do I create a separate Address Book? I'm not asking about a mailing list but an address book where the addresses are not mixed in with my regular address book. I already have three address books created for me by Thunderbird. I add all new addresses to one of those but am afraid to delete the other address books because some of their addresses are not repeated in my "main" address book. So if I don't delete all the names in one of the existing books, I need to create an empty book that will not mix the addresses with those in another address book. HOW DO I CREATE A NEW, EMPTY ADDRESS BOOK? I want to be able to create various mailing LISTS using the addresses in this new book so I will eventually have a special address book with a variety of mailing lists I can use as I wish.

In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

My photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

my photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

We use CS6, yes we calibrate using x-rite. I have always had adobe manage colors when printing. This problem just occurred, all my settings are the same as they have been for years. The only thing we did lately is do an update to CS6. We thought it might be our printer but when we use the printer manages color it works fine, The problem with adobe manages color is it is not blending the light highlights like on top of the cheeks with the colors around the cheeks and its putting a faint red between the two it just does not have a smooth transition. I printed a photo that I had printed 4 months ago with no issue, and this time it had the issue that I am dealing with now. Somehow the photo shop manages color is not getting the right info to my printer.
I set paper type
set quality
no color adjustment
set my profile
Teri

My maps are not showing buildings with clarity. They have no color. It's like my maps are outdated but my ipad is fully updated. I can't get the option of views in my ipad

My maps are not showing buildings with clarity. They have no color. It's like my maps are outdated but my ipad is fully updated. I can't get the option of views in my ipad. Like the downtown view and stuff. Please help.

What locations are you seeing these "problems"? If the satellite photos are older or not as clear, you may see some of what you describe. Take a look at one of the major cities and see if they are also appearing as you describe. Someplace like New York, London, Paris. Those are among the cities that seem to be updated most frequently.
Incidentally, the maps are web/cloud based and not contained within the maps app on your iPad, so regardless of the version of your app, you will still get the most current map available.

HT5181 iPhoto for iOS: Photos in iphoto's Camera Roll folder are not updated automatically with edits from other programs

How can I solve the problem în the subject?

How can I solve the problem în the subject?
What exactly are you trying to do?
Have you been editing photos in iPhoto and want to add them to your camera rool or photo stream?
Then do exactly as the article describes, that you lonked to:
iPhoto for iOS: Photos in Camera Roll are not updated automatically with edits from iPhoto
Use iPhoto's Sharing to save a copy of the edited photo to the Caera Roll, or explain on mor e detail, what you want to do.
Regards
Léonie

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

Do I understand correctly that I have to buy the new version for $149.00?
You can upgrade for $79.
Products

HT204053 My devices, iPad and iPhone, are not updating automatically with pages. Any suggestions. They use to about one week ago.

My devices, iPad and iPhone, are not updating automatically with pages. Any suggestions. They use to update beautifully about one week ago. I took my MacBook Pro to the Apple store for software issues, and I been having updating issues. Little help please.....

Welcome to the Apple community.
Check all your devices still have documents and data syncing turned on in settings > iCloud and that iCloud is enabled at settings > Pages. If this doesn't help, reset documents & Data from a computer at...
iCloud.com

After install Windows 10, the texts in Skype are not very neat, with low definition

After install Windows 10, the texts in Skype are not very neat, with low definition. This has happend just with Skype. Do you know how I can fix it?

I HAVE FOUND A FIX! Searching through the support blogs paid off in a big way. A minor registry edit is all it took and my drive is working like new! Here's the fix. My system is Windows 10 64-bit.  Resolution 5: Create a registry subkey
Note To use this method, you must be logged on to Windows as an administrator. If you need help verifying that you are an administrator, go tohttp://support.microsoft.com/gp/admin
Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur.
To create the registry subkey, follow these steps:
    Press the Windows logo key + R to open the Run box. (or right-click on windows icon in lower left corner)
    Type regedit in the Run box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
    In the navigation pane, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    Right-click atapi, point to New, then click Key.
    Type Controller0, and then press Enter.
    Right-click Controller0, point to New, and then click DWORD(32-bit) Value .
    Type EnumDevice1, and then press Enter.
    Right-click EnumDevice1, click Modify....
    Type 1 in the Value data box, and then click OK.
    Exit Registry Editor.

Valuation area not yet productive with material ledger

While doing goods receipt at MB1C,i got the below error:
The description of the error is given below
Valuation area XXX2 not yet productive with material ledger
Message no. C+020
Diagnosis
The material ledger has been activated for the valuation area but material data has not yet been converted in this valuation area.
Procedure for System Administration
If you want to work with the material ledger, choose Accounting -> Controlling -> Actual Costing/Material Ledger -> Utilities -> Production Startup.
There you can convert the data for the material ledger by following the instructions in the online documentation.
Note
Setting the material ledger to productive cannot be undone.
See also:
Actual Costing/Material Ledger in the SAP Library.
The implementation guide for Actual Costing/Material Ledger.
Can you kindly suggest me how to fix this error.
Regards
Sabera

Hi Sabera,
The Valuation Area is not activated for your material ledger. Go to SAP Access>>Accounting>>Controlling>>product cost controlling>>Actual Costing>>environment>>Production Start up>>Set Valuation area as productive.
If you already activated Valution area in to Productive Statge.
Then go to T.Code OMX1 and for your valuation area XXX2 tick the ML activation box.
the error wont come
regards
srikanth

One Note documents on S/P 2013 are not opening/syncing with one note (2010) desktop clients

Hi,
We have S/p 2010 and S/P 2013 running in our company. we also have some computers with office 2010 and others with office 2013.
since a few days ago, the desktop one note apps are failing to open one note documents stored on S/P 2013. they can still access/sync oneNote docs on S/P 2010.
I can not trace back the problem to anything. and it happens to all stations having onenote 2010. the users running onenote 2013 are having no trouble with either S/P
Any ideas?
Thanks in advance

Hi Yiannis,
What was the error message when you opened the OneNote file from SharePoint 2013 in OneNote desktop?
I recommend to change the settings below in SharePoint document library where the OneNote file stores:
Turn off Required Check Out in the SharePoint Document Library.
Turn off Minor Versions in the SharePoint Document Library.
Turn off Required Properties in the SharePoint Document Library.
For detailed steps, please refer to the link below:
https://support.office.com/en-sg/article/Troubleshoot-errors-in-OneNote-40976dfa-818f-4e5f-b8fb-b0fbb9bf785a
If above cannot work, please check if the site in read-only mode.
http://blog.portiva.nl/2014/06/25/sharepoint-2013-site-stuck-in-read-only-mode/
If that is the case, then you need to ask your administrator to turn off read-only mode. However, if this is not an option, you can follow these steps in the link below to work around the issue.
https://support.microsoft.com/en-us/kb/2777002
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Time entries booked against network & activity are not transferring to PS

Hi every one,
We have scheduled a job to transfer time entries which were booked against network & activity on daily basis, but for some reason the time entries are not getting posted against the network (Only for certain network, see attachment), though it is not showing any error message when i saw the spool log for the job in SM37. When i ran CAT5 in test mode it is showing time entries which needs to be booked against the network and activity.
Can some one help me out to transfer the time entries via the job??
I have attached the screenshot from CAT5 transaction.

Hi Ram,
Variant will determine the selection of personnel numbers and other parameter defined on CAT5 selection screen. If manually posting is happening on network then it means network are fine.
What I can suggest is, you can create a new variant and then run it thought SM36 and check in SM37.
Go in CAT5 transaction, and untick test run, log and dates transfer can be ticked. Then save. Then variant attributes screen will open save the variant with a name and description .lets assume you saved the variant with name TEST. If you wish you can on save the variant on certain number of network or personnel number, it depends on you to keep it blank or run variant for limited number of records.
Now go in SM36 and click on STEP, in the ABAP program TAB enter "RCATSTPS", then select the variant using search help and you will find the variant defined above i.e. TEST.Check and save from bottom of the window. Come back once. Then click on START CONDITION, Date/Time - define a date and time for the variant "TEST" to run as a JOB.
Check in SM37 you will find the schedule JOB run time and date. After the JOB is finished you check report CJI3 for actual posting of network.
This will work fine, if in case you need few more fields to be defined in variant then I will suggest to create a variant via CATA instead of CAT5, their you will get more options to post time.
Regards,
Sandeep

Delta Loads are not working: 0FI_GL_10 With enhancement : HR Data in source

Hello Friends. Thanks for your answer on theory which I know, Please help me with this situation. I read all the sdn response to my message and have below for your suggestion
QUES1: Why the 0RECORDMODE is not coming in Standard DSO and hence it is not there in Transformation in between Infosource and DSO. What do I need to include 0RECORDMODE in standard DSO. What is the correct OSS to Implement on SP 10 to solve this.
Ques2. As suggested by you If I run the Delta loads after waiting for 1 hour of Init load. say init load was done at 11 am . i will do the delta at 12:10 am to psa via Infopack and then wait for an hour to run the DTP from PSA to DSO. Delta Records come in but it also bring in the records in DSO that are not changed from about 7 hours in ECC. and make our total Balance incorrect.
Ques3: We have this Cocatenation of Keys in DSO since we exceeded the total number of 13 key in DSO.
Cocatenation#1 GL ACCT and CHRT OF ACCTS
Cocatenation#1 SEGMENT AND CONT AREA
Cocatenation#1 Version, Value Typem, Valuation view, Currency Type.
<b>
Since business want to include HR Data in Keys Like Employee Number, Emp Code, EMPSPIMCODE. Payroll ID and I can not remove these fields from Key in DSO as per the business.</b>
Also the above fields GL ACCT , CHRT OF ACCTS, SEGMENT, CONT AREA
exist in Data FIELDS OF DSO. so what are the steps to modify the design to fix this asap.
Please email me at [email protected] if you have any docs to resolve the above
Thanks
Soniya
null

Did the full load bring all records from sourcesystem to PSA?
Was this an issue with the first delta you have tested ?
Concatentaion of multiple keys into one should not be an issue here as that must have been happening in DSO and delta brings incorrect records to PSA itself.
Are you validating delta records against FAGLFLEXT inputing the timestamp value or RSA3 ..how ?
<b>Check if this note helps</b>
Note 1002272 - NewGL-DataSource 0FI_GL_10, 3FI_GL_*: Missing record.
Is delta bringing incorrect records to PSA or DTP brings incorrect records to DSO from PSA ?
May be you should revisit the logic behind for the enhancement of 0FI_GL_10.
I am facing a similar issue as well but here delta doesnot even bring a single record ( ODS has 20 keys )...will update if resolves and you do the same.
Message was edited by:
Jr Roberto

Active area not lined up with link

Similar Messages

Maybe you are looking for