Active call trace (on E1 line or in callmanager 3.3)

Can i trac? a out going call in a callmanager 3.3.
The problem is that a call is made fore up to 7 days now.
I know the destination call but I can?t trace de internal call/phone nr.
Can someone help me to find the dialing out phone number or the other way to find the out going channel in my E1 line?
Thx
Piotr,

Hi,
Thanks for replaying to my message.
I am familiar with that voice commands on a 6500. However it doesn't give me a clear view to sea the line or phone number I am trying to trace.
The command makes possible to sea active out going devices by ip nr. but not to which numbers they dialing to.
Is there a fast way within a callmanager or other module like MEIPS to trace a outgoing call.
thanks fore your time and effort.
Piotr

Similar Messages

Is it possible to transfer an active call from a PLAR line to another extension? CUCM 9.1

We have multiple PLAR's set up that work great but not everyone has them on their phone. So the problem arises when someone who does not have a certain PLAR on their phone and wants to join the conversation. We had hoped that we could transfer/conference the call on the PLAR to the extension of the person who does not have it on their phone but get a busy tone as soon as the transfer key is pressed. Is this at all possible?

I am going to assume that you provisioned PLAR by using a "null" translation pattern (i.e. pattern with no digits). And that the phones will automatically connect to the PLAR destination when they go off hook.
When you try to do a transfer, the CUCM digit analysis process will use the same CSS logic as it does for a standard/direct call. So, the behavior you are observing is expected. You can't use a PLAR line as if it was a regular phone line.
Your scenario has sparked my curiosity. In my experience, PLAR lines are usually added to common area phones outside of a secure area or something similar. It sounds like you are using PLAR as secondary lines on user stations. I may be mis-interpreting your scenario but I am inclined to think that you may be better served by using other UCM features. More information about your requirements would be needed to give you proper guidance.
If interested then please share more info. Otherwise, the answer to your original question concerning PLAR is that it doesn't work the way you want it too.
HTH
-Bill (@ucguerrilla)
http://ucguerrilla.com

No longer boots since update [kinit & call trace troubles]

Hi all,
Recently I did a full system upgrade on a completely working system (running I assume was a 2.6.28 kernel26) that upgraded it to 2.6.29. It then stopped booting correctly. I left this for a while since I didn't have the time for messing around with it. Today I got back to it, used live cd, chrooted and did a full system update (to a 2.6.30 kernel) hoping it may have fixed it. No such luck.
Here is the error portion of the boot up/init:
Waiting 10 seconds for device /dev/sda3 ...
Root device '/dev/sda3' doesn't exist, attempting to create it
/bin/mknod /dev/root b 8 3
:: Initramfs Completed - control passing to kinit
IP-Config: no devices to configure
Waiting 0 s before mouting root device...
kinit: Cannot open root device dev(8,3)
kinit: init not found!
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: kinit Not tainted 2.6.30-ARCH #1
Call Trace:
[<c03cebcd>] ? panic+0x5b/0xff
[<c013f624>] ? do_exit+0x614/0x6f0
[<c02dce40>] ? redirected_tty_write+0x0/0xe0
[<c013f810>] ? complete_and_exit+0x0/0x30
[<c0103d74>] ? syscall_call+0x7/0xb
My mkinitcpio.conf is untouched, as are the files in mkinitcpio.d.
My FS is as follows:
/dev/sda1 - ext2 - /boot
/dev/sda2 - swap
/dev/sda3 - ext3 - /
/dev/sda4 - ext3 - /home
My menu.1st for grub is:
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 rootfstype=ext3 root=/dev/sda3 vga=791 ro
initrd /kernel26.img
The bizare thing is, if I change to root=/dev/sda4, I don't get 'root device doesn't exist etc etc etc' and it mounts it fine with no errors and then kinit drops to a recovery console instead of panicing.
I am not sure what to do now. Basically, what has changed since 2.6.28 that caused this in the first place?
Thanks in advance for any help!
Last edited by Kamu (2009-08-03 11:26:13)

This may sound like a silly question, but you did have /boot mounted within the chroot when the kernel installed right?
--Does the arch-fallback initrd help?
--Boot into your recovery console and take a look at dmesg & /proc/partitions. Make sure your drives are being detected & what drives/partitions are where.
--More than one disk? ls /sys/block/[sh]d[a-z]/ should show you what partitions are on which disks.
-- Be sure root entry in /etc/fstab and on kernel command line are the same.
--More than one disk controller? Put the module in mkinitcpio.conf so the controller with your / on it gets loaded first (I had fun and games with this during the ide -> pata switch)
+1 for the referencing partitions by UUID, you can also do it by filesystem label (root=/dev/disk/by-[label,uuid]/XXXX)
Steve.

Substitution and activated the same at the line item level in order to subs

I have created a substitution and activated the same at the line item level in order to substitute the ZRSPL (Payment Block) field by a constant value and a vendor invoice is posted using Transaction FB60. But the same is not working. When I post a vendor invoice using FB60, Payment Block field is being shown as blank instead of the constant value which I want to substitute.
>
> My prerequsite is mentioned below :
> BKPF-TCODE = 'FB60' AND BKPF-BUKRS = 'ABC' AND ( BKPF-BLART = 'KR' OR
> BKPF-BLART = 'KY' ) AND BSEG-DMBTR > '10000'

Hi,
I am not understanding the logic behind the prerequisites mentioned in your query.
Payment block field exists only for vendor related line item. However, you have not mentioned vendor reconciliation account in the prerequisites. It means, this substitution will trigger for all the line items which is wrong.
Or try following options.....
1) Substitution->Simulation
2) Extras->Expert Trace
Best Regards,
Madhu

All data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ?????

all data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ????? What is wrong with it???? How do I fix it????

You aren't attached to a bluetooth headset or other device for some strange reason? Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.

Isdn Layer 1 deactivated when there is no active call

Hi All,
I am in Nairobi Kenya. Here we use ISDN Basic-net3 and my problem is that most of the telco switches here deactivate Layer 1 when there is no active call.
When I try to initiate a call by using the ISDN test call command I get an error to the effect that B channel is not available.
The only way I can initiate a call is I first call the line then and then disconnect. Then I have about 5 seconds to make a test call and pings are successful. How do I make the router initiate a call when layer 1 is deactivated.
the debug isdn q921 out has nothing till a call comes in.
I also understatnd that European ISDN switches deactivate Layer 1 when there no active call. I dont have a problem with one of the switches, coz it does not bring down the line when there is no active call.
Thakx in advance
Martin

Thanks for the quick response.
It is a cisco 1760
The IOS is c1700-sv3y-mz.122-15.T5.bin
When I try to make a test call the show isdn status initially indicates that the router is trying to activate layer 1 then after 5 seconds it indicates that it is deactivated.
I have not yet configured DDR as indicated in the config file
Building configuration...
Current configuration : 3054 bytes
! Last configuration change at 00:38:54 UTC Mon Aug 9 1993
! NVRAM config last updated at 00:36:54 UTC Mon Aug 9 1993
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Gill-House
logging queue-limit 100
enable secret xxx
ip subnet-zero
no ip domain lookup
isdn switch-type basic-net3
no voice hpi capture buffer
no voice hpi capture destination
class-map match-all voice-traffic
match ip rtp 16384 16383
policy-map voice
class voice-traffic
priority 24
class class-default
fair-queue
gw-accounting syslog
interface Loopback0
description Loopback interface for VoIP Dial-peers
ip address 128.1.x.x.255.255.255
interface Multilink1
bandwidth 6
ip address 128.1.x.x.255.255.252
ip tcp header-compression iphc-format
ppp multilink
ppp multilink fragment-delay 20
ppp multilink interleave
multilink-group 1
ip rtp header-compression iphc-format
interface FastEthernet0/0
description Gill-House LAN
ip address 128.1.x.x.255.255.0
speed auto
interface Serial0/0
description Link to Head Office
bandwidth 64
no ip address
encapsulation ppp
no fair-queue
ppp multilink
multilink-group 1
interface BRI1/0
ip address 10.10.1.2 255.255.255.0
encapsulation ppp
isdn switch-type basic-net3
isdn point-to-point-setup
keepalive 20
router eigrp 100
passive-interface FastEthernet0/0
passive-interface Loopback0
network 128.1.0.0
no auto-summary
no eigrp log-neighbor-changes
ip classless
no ip http server
logging source-interface Loopback0
logging 128.1.1.179
call rsvp-sync
voice-port 2/0
cptone GB
ring frequency 50
voice-port 2/1
cptone GB
ring frequency 50
dial-peer cor custom
dial-peer voice 2 pots
destination-pattern 101
port 2/0
dial-peer voice 51 voip
destination-pattern 100
session target ipv4:128.1.0.254
ip qos dscp cs5 signaling
dial-peer voice 55 voip
destination-pattern 120
session target ipv4:128.1.31.254
ip qos dscp cs5 signaling
dial-peer voice 52 voip
destination-pattern 102
session target ipv4:128.1.91.254
ip qos dscp cs5 signaling
dial-peer voice 53 voip
destination-pattern 103
session target ipv4:128.1.121.254
ip qos dscp cs5 signaling
dial-peer voice 54 voip
destination-pattern 110
session target ipv4:128.1.21.254
ip qos dscp cs5 signaling
dial-peer voice 56 voip
destination-pattern 130
session target ipv4:128.1.41.254
ip qos dscp cs5 signaling
dial-peer voice 57 voip
destination-pattern 140
session target ipv4:128.1.111.254
ip qos dscp cs5 signaling
dial-peer voice 58 voip
destination-pattern 150
session target ipv4:128.1.61.254
ip qos dscp cs5 signaling
dial-peer voice 59 voip
destination-pattern 160
session target ipv4:128.1.71.254
ip qos dscp cs5 signaling
line con 0
logging synchronous
line aux 0
line vty 0 4
password housing
login
ntp clock-period 17208074
ntp server 128.1.1.211
ntp server 128.1.0.254
end
Gill-House#

Disabling Active call window...cupc 8.6

Question from one of my users...is there a way to disable the active calls window when the user is on the phone?
I just got an earful about how annoying this is...
Thanks in advance for any advice...
~Ray

Not without disabling deskphone/softphone control and turning CUPC into an IM&P-only client. If you wanted to go that route you would want to disable the CTI, CCMCIP, and Audio profiles within the CUP Admin > CUPC/Jabber > User settings.
Please remember to rate helpful responses and identify helpful or correct answers.

Where can i check in the real time monitoring tool if there are active calls in progress?

where can i check in the real time monitoring tool if there are active calls in progress?

Hi
Selecting Call Manager -->Call Process ---> call activity
HTH
Regards
Carlo

HT4515 Activating call forwarding on my iPhone 4S & iphone 5,

Activating call forwarding on my iPhone 4S & iphone 5, I go into "settings", then "phone" then "call forwarding" and then enter the phone number, after that there's nothing, if I exit out of it it just cancels itself out, ANY IDEA's??
Thanks Jeff M

Contact your carrier and make sure you have call forwarding provisioned on your account. Or log on to their customer portal and see if you can check or set the option yourself.

Set Sequence Call Trace Setting for a SequenceCall Step

Hi there. I need to edit a sequence file automatically with a LabVIEW program. We have a program the is successful in editing and saving a sequence file automatically which goes in and does a few things. However I also need to be able to go in and change a setting in Run Options for the top level SequenceCall steps in Main of MainSequence. I want to be able to change the Sequence Call Trace Setting for the steps from Disable Tracing in Sequence to Enable Tracing in Sequence. However I do not seem to be able to find this in the API call chin anywhere. At this point I am certain that it IS in there somewhere, but probably hidden under an option mask for something. Anyone know where I might find it?
This is NOT something I want to do at execution time. This is something I want to do by launching TestStand in edit mode from LabVIEW to automatically edit and save a new version of the sequence file.
Thanks!
Greg
Gregory Osenbach, CLA
Fluke
Solved!
Go to Solution.

Not sure if this will work. I'm kinda bummed the To More Specific Class function wouldn't work.
The Automation Refnum going into the top of the TypeCast is using the NI TestStand Adapter API 4.1.1 Version 1.0 as the type library and SequenceCallModule as the Object.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Server stops working correctly after Call Trace

I use linux-lts on servers. This one is running 3.10.16-1-lts and today it got the next call trace. Before this I've suspected proftpd like a possible reason and have changed it to vsftpd. There were the same server crashes with proftpd. In this case server uptime was 22 days.
What does this mean ? How can I fix this ? Is any workaround ?
Nov 19 06:05:22 my-server kernel: [2812442.750027] INFO: task kworker/0:2:18034 blocked for more than 120 seco
nds.
Nov 19 06:05:22 my-server kernel: [2812442.750132] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
Nov 19 06:05:22 my-server kernel: [2812442.750251] kworker/0:2 D ffff88007b6bb028 0 18034 2 0x000
00000
Nov 19 06:05:22 my-server kernel: [2812442.750269] Workqueue: events_long flush_old_commits [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750271] ffff880009a4bc50 0000000000000046 ffff880009a4bfd8 0000000
000014140
Nov 19 06:05:22 my-server kernel: [2812442.750274] ffff880009a4bfd8 0000000000014140 ffff88007c0bc280 ffff880
07c7eb380
Nov 19 06:05:22 my-server kernel: [2812442.750277] 0000000000000000 0000000000000fff 0000000000000000 0000000
000000000
Nov 19 06:05:22 my-server kernel: [2812442.750280] Call Trace:
Nov 19 06:05:22 my-server kernel: [2812442.750287] [<ffffffff814b4a69>] schedule+0x29/0x70
Nov 19 06:05:22 my-server kernel: [2812442.750290] [<ffffffff814b4dfe>] schedule_preempt_disabled+0xe/0x10
Nov 19 06:05:22 my-server kernel: [2812442.750292] [<ffffffff814b3524>] __mutex_lock_slowpath+0x144/0x320
Nov 19 06:05:22 my-server kernel: [2812442.750295] [<ffffffff814b3712>] mutex_lock+0x12/0x30
Nov 19 06:05:22 my-server kernel: [2812442.750301] [<ffffffffa020204b>] reiserfs_write_lock+0x2b/0x40 [reiser
fs]
Nov 19 06:05:22 my-server kernel: [2812442.750306] [<ffffffffa01eae9f>] reiserfs_write_dquot+0x1f/0xd0 [reise
rfs]
Nov 19 06:05:22 my-server kernel: [2812442.750310] [<ffffffff811da334>] dquot_writeback_dquots+0x194/0x1e0
Nov 19 06:05:22 my-server kernel: [2812442.750315] [<ffffffffa01e9f2b>] reiserfs_sync_fs+0x1b/0x80 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750318] [<ffffffff814b33de>] ? mutex_unlock+0xe/0x10
Nov 19 06:05:22 my-server kernel: [2812442.750321] [<ffffffff81387d97>] ? od_dbs_timer+0xc7/0x160
Nov 19 06:05:22 my-server kernel: [2812442.750326] [<ffffffffa01e9fd4>] flush_old_commits+0x44/0x50 [reiserfs
Nov 19 06:05:22 my-server kernel: [2812442.750330] [<ffffffff8106fb3b>] process_one_work+0x16b/0x3e0
Nov 19 06:05:22 my-server kernel: [2812442.750332] [<ffffffff810704d1>] worker_thread+0x121/0x3b0
Nov 19 06:05:22 my-server kernel: [2812442.750335] [<ffffffff810703b0>] ? manage_workers.isra.23+0x2b0/0x2b0
Nov 19 06:05:22 my-server kernel: [2812442.750338] [<ffffffff810765a0>] kthread+0xc0/0xd0
Nov 19 06:05:22 my-server kernel: [2812442.750340] [<ffffffff810764e0>] ? kthread_create_on_node+0x120/0x120
Nov 19 06:05:22 my-server kernel: [2812442.750344] [<ffffffff814be2ac>] ret_from_fork+0x7c/0xb0
Nov 19 06:05:22 my-server kernel: [2812442.750346] [<ffffffff810764e0>] ? kthread_create_on_node+0x120/0x120
Nov 19 06:05:22 my-server kernel: [2812442.750349] INFO: task vsftpd:25898 blocked for more than 120 seconds.
Nov 19 06:05:22 my-server kernel: [2812442.750448] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
Nov 19 06:05:22 my-server kernel: [2812442.750564] vsftpd D ffff88007b6bb028 0 25898 25893 0x00000100
Nov 19 06:05:22 my-server kernel: [2812442.750566] ffff88004bbdd2c0 0000000000000086 ffff88004bbddfd8 0000000000014140
Nov 19 06:05:22 my-server kernel: [2812442.750569] ffff88004bbddfd8 0000000000014140 ffff8800033a18f0 ffff88004bbddfd8
Nov 19 06:05:22 my-server kernel: [2812442.750572] ffff88004bbdd3b8 0000000000000000 ffff880000000001 ffff880037e4f4e0
Nov 19 06:05:22 my-server kernel: [2812442.750574] Call Trace:
Nov 19 06:05:22 my-server kernel: [2812442.750580] [<ffffffffa01f3eaf>] ? search_for_position_by_key.part.14+0xaf/0x290 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750586] [<ffffffffa01f53d9>] ? search_for_position_by_key+0x49/0x90 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750589] [<ffffffff814b4a69>] schedule+0x29/0x70
Nov 19 06:05:22 my-server kernel: [2812442.750591] [<ffffffff814b4dfe>] schedule_preempt_disabled+0xe/0x10
Nov 19 06:05:22 my-server kernel: [2812442.750593] [<ffffffff814b3524>] __mutex_lock_slowpath+0x144/0x320
Nov 19 06:05:22 my-server kernel: [2812442.750596] [<ffffffff814b3712>] mutex_lock+0x12/0x30
Nov 19 06:05:22 my-server kernel: [2812442.750601] [<ffffffffa020204b>] reiserfs_write_lock+0x2b/0x40 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750606] [<ffffffffa01eb9c5>] reiserfs_quota_write+0x185/0x2b0 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750608] [<ffffffff814b33de>] ? mutex_unlock+0xe/0x10
Nov 19 06:05:22 my-server kernel: [2812442.750613] [<ffffffffa02020a5>] ? reiserfs_write_unlock+0x45/0x50 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750617] [<ffffffff811683ae>] ? __kmalloc+0x2e/0x220
Nov 19 06:05:22 my-server kernel: [2812442.750622] [<ffffffffa0202119>] ? reiserfs_write_unlock_once+0x19/0x20 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750625] [<ffffffffa07ed0d4>] ? getdqbuf+0x14/0x40 [quota_tree]
Nov 19 06:05:22 my-server kernel: [2812442.750628] [<ffffffffa07ed913>] qtree_write_dquot+0xb3/0x150 [quota_tree]
Nov 19 06:05:22 my-server kernel: [2812442.750631] [<ffffffffa07f205b>] v2_write_dquot+0x2b/0x30 [quota_v2]
Nov 19 06:05:22 my-server kernel: [2812442.750634] [<ffffffff811d99fb>] dquot_commit+0x8b/0xc0
Nov 19 06:05:22 my-server kernel: [2812442.750638] [<ffffffffa01eaf04>] reiserfs_write_dquot+0x84/0xd0 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750643] [<ffffffffa01eaf82>] reiserfs_mark_dquot_dirty+0x32/0x50 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750646] [<ffffffff811dd3b1>] __dquot_alloc_space+0x161/0x210
Nov 19 06:05:22 my-server kernel: [2812442.750649] [<ffffffff81085ca3>] ? wake_up_process+0x23/0x40
Nov 19 06:05:22 my-server kernel: [2812442.750655] [<ffffffffa01f707f>] reiserfs_insert_item+0xef/0x350 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750658] [<ffffffff8108f46f>] ? load_balance+0xff/0x780
Nov 19 06:05:22 my-server kernel: [2812442.750661] [<ffffffff81082b2a>] ? update_rq_clock.part.66+0x1a/0x100
Nov 19 06:05:22 my-server kernel: [2812442.750665] [<ffffffff8106213b>] ? lock_timer_base.isra.35+0x2b/0x50
Nov 19 06:05:22 my-server kernel: [2812442.750667] [<ffffffff81061d17>] ? internal_add_timer+0x17/0x40
Nov 19 06:05:22 my-server kernel: [2812442.750669] [<ffffffff810623d1>] ? mod_timer_pending+0xe1/0x180
Nov 19 06:05:22 my-server kernel: [2812442.750672] [<ffffffff8126018e>] ? cpumask_next_and+0x2e/0x40
Nov 19 06:05:22 my-server kernel: [2812442.750675] [<ffffffff8126018e>] ? cpumask_next_and+0x2e/0x40
Nov 19 06:05:22 my-server kernel: [2812442.750677] [<ffffffff8108ea83>] ? find_busiest_group+0x133/0xa20
Nov 19 06:05:22 my-server kernel: [2812442.750683] [<ffffffffa01f7edd>] indirect2direct+0x1fd/0x280 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750685] [<ffffffff814b3302>] ? __mutex_unlock_slowpath+0x82/0x150
Nov 19 06:05:22 my-server kernel: [2812442.750691] [<ffffffffa01f6389>] reiserfs_cut_from_item+0x319/0x760 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750693] [<ffffffff8126018e>] ? cpumask_next_and+0x2e/0x40
Nov 19 06:05:22 my-server kernel: [2812442.750695] [<ffffffff8126018e>] ? cpumask_next_and+0x2e/0x40
Nov 19 06:05:22 my-server kernel: [2812442.750702] [<ffffffffa01f69f3>] reiserfs_do_truncate+0x223/0x520 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750704] [<ffffffff814b3302>] ? __mutex_unlock_slowpath+0x82/0x150
Nov 19 06:05:22 my-server kernel: [2812442.750710] [<ffffffffa01e0fbf>] reiserfs_truncate_file+0x1ef/0x3a0 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750715] [<ffffffffa01e5632>] reiserfs_file_release+0x292/0x350 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750718] [<ffffffff81181f14>] __fput+0xa4/0x230
Nov 19 06:05:22 my-server kernel: [2812442.750720] [<ffffffff8118215e>] ____fput+0xe/0x10
Nov 19 06:05:22 my-server kernel: [2812442.750723] [<ffffffff8107343f>] task_work_run+0x9f/0xe0
Nov 19 06:05:22 my-server kernel: [2812442.750726] [<ffffffff81011d8c>] do_notify_resume+0x8c/0xa0
Nov 19 06:05:22 my-server kernel: [2812442.750729] [<ffffffff814be61a>] int_signal+0x12/0x17
Nov 19 06:05:22 my-server kernel: [2812442.750731] INFO: task vsftpd:25904 blocked for more than 120 seconds.
Nov 19 06:05:22 my-server kernel: [2812442.750830] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Nov 19 06:05:22 my-server kernel: [2812442.750946] vsftpd D ffff88007b6bc950 0 25904 25899 0x00000100
Nov 19 06:05:22 my-server kernel: [2812442.750949] ffff880062c6b680 0000000000000082 ffff880062c6bfd8 0000000000014140
Nov 19 06:05:22 my-server kernel: [2812442.750951] ffff880062c6bfd8 0000000000014140 ffff8800033a2140 ffffffff811afd1f
Nov 19 06:05:22 my-server kernel: [2812442.750954] ffff8800081cc388 ffff880062c6b910 ffff880062c6bdd8 0000000000000000
Nov 19 06:05:22 my-server kernel: [2812442.750957] Call Trace:
Nov 19 06:05:22 my-server kernel: [2812442.750960] [<ffffffff811afd1f>] ? __find_get_block+0xbf/0x230
Nov 19 06:05:22 my-server kernel: [2812442.750966] [<ffffffffa01f7242>] ? reiserfs_insert_item+0x2b2/0x350 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750968] [<ffffffff810772f5>] ? wake_up_bit+0x25/0x30
Nov 19 06:05:22 my-server kernel: [2812442.750971] [<ffffffff811ae6f7>] ? unlock_buffer+0x17/0x20
Nov 19 06:05:22 my-server kernel: [2812442.750973] [<ffffffff814b4a69>] schedule+0x29/0x70
Nov 19 06:05:22 my-server kernel: [2812442.750976] [<ffffffff814b4dfe>] schedule_preempt_disabled+0xe/0x10
Nov 19 06:05:22 my-server kernel: [2812442.750978] [<ffffffff814b3524>] __mutex_lock_slowpath+0x144/0x320
Nov 19 06:05:22 my-server kernel: [2812442.750980] [<ffffffff814b3712>] mutex_lock+0x12/0x30
Nov 19 06:05:22 my-server kernel: [2812442.750983] [<ffffffff811d9999>] dquot_commit+0x29/0xc0
Nov 19 06:05:22 my-server kernel: [2812442.750988] [<ffffffffa01eaf04>] reiserfs_write_dquot+0x84/0xd0 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750993] [<ffffffffa01eaf82>] reiserfs_mark_dquot_dirty+0x32/0x50 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.750996] [<ffffffff811dd579>] __dquot_free_space+0x119/0x2b0
Nov 19 06:05:22 my-server kernel: [2812442.750998] [<ffffffff810772f5>] ? wake_up_bit+0x25/0x30
Nov 19 06:05:22 my-server kernel: [2812442.751003] [<ffffffffa01d944c>] _reiserfs_free_block+0x18c/0x1d0 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.751008] [<ffffffffa01d9502>] reiserfs_free_block+0x72/0xb0 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.751013] [<ffffffffa01f5813>] prepare_for_delete_or_cut+0x3a3/0x570 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.751018] [<ffffffffa01f612a>] reiserfs_cut_from_item+0xba/0x760 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.751021] [<ffffffff81089388>] ? __enqueue_entity+0x78/0x80
Nov 19 06:05:22 my-server kernel: [2812442.751027] [<ffffffffa01f69f3>] reiserfs_do_truncate+0x223/0x520 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.751030] [<ffffffff814b3301>] ? __mutex_unlock_slowpath+0x81/0x150
Nov 19 06:05:22 my-server kernel: [2812442.751035] [<ffffffffa01e0fbf>] reiserfs_truncate_file+0x1ef/0x3a0 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.751040] [<ffffffffa01e5632>] reiserfs_file_release+0x292/0x350 [reiserfs]
Nov 19 06:05:22 my-server kernel: [2812442.751042] [<ffffffff81181f14>] __fput+0xa4/0x230
Nov 19 06:05:22 my-server kernel: [2812442.751045] [<ffffffff8118215e>] ____fput+0xe/0x10
Nov 19 06:05:22 my-server kernel: [2812442.751047] [<ffffffff8107343f>] task_work_run+0x9f/0xe0
Nov 19 06:05:22 my-server kernel: [2812442.751049] [<ffffffff81011d8c>] do_notify_resume+0x8c/0xa0
Nov 19 06:05:22 my-server kernel: [2812442.751052] [<ffffffff814be61a>] int_signal+0x12/0x17
Nov 19 06:05:22 my-server kernel: [2812442.751055] INFO: task kworker/u8:0:30662 blocked for more than 120 seconds.
Nov 19 06:05:22 my-server kernel: [2812442.751158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Nov 19 06:05:22 my-server kernel: [2812442.751273] kworker/u8:0 D ffff880010395a10 0 30662 2 0x00000000
Nov 19 06:05:22 my-server kernel: [2812442.751278] Workqueue: writeback bdi_writeback_workfn (flush-9:1)
Nov 19 06:05:22 my-server kernel: [2812442.751280] ffff880010395980 0000000000000046 ffff880010395fd8 0000000000014140
Nov 19 06:05:22 my-server kernel: [2812442.751282] ffff880010395fd8 0000000000014140 ffff880011b78850 ffffffffa0096f80
Nov 19 06:05:22 my-server kernel: [2812442.751285] ffff880046e79100 0000000000000020 ffff880046e79158 ffff88007b1c0000
Nov 19 06:05:22 my-server kernel: [2812442.751288] Call Trace:
Nov 19 06:05:22 my-server kernel: [2812442.751293] [<ffffffff81244eab>] ? blk_rq_map_sg+0x8b/0x1f0
Nov 19 06:05:22 my-server kernel: [2812442.751296] [<ffffffff8111ab50>] ? filemap_fdatawait+0x30/0x30
Nov 19 06:05:22 my-server kernel: [2812442.751299] [<ffffffff814b4a69>] schedule+0x29/0x70
Nov 19 06:05:22 my-server kernel: [2812442.751301] [<ffffffff814b4cef>] io_schedule+0x8f/0xe0
Nov 19 06:05:22 my-server kernel: [2812442.751303] [<ffffffff8111ab5e>] sleep_on_page+0xe/0x20
Nov 19 06:05:22 my-server kernel: [2812442.751306] [<ffffffff814b28eb>] __wait_on_bit_lock+0x5b/0xc0
Nov 19 06:05:22 my-server kernel: [2812442.751308] [<ffffffff8111ac9a>] __lock_page+0x6a/0x70
Nov 19 06:05:22 my-server kernel: [2812442.751310] [<ffffffff81077340>] ? autoremove_wake_function+0x40/0x40
Nov 19 06:05:22 my-server kernel: [2812442.751313] [<ffffffff81127361>] ? pagevec_lookup_tag+0x21/0x30
Nov 19 06:05:22 my-server kernel: [2812442.751316] [<ffffffff81124f73>] write_cache_pages+0x403/0x4b0
Nov 19 06:05:22 my-server kernel: [2812442.751319] [<ffffffff81124890>] ? mapping_tagged+0x20/0x20
Nov 19 06:05:22 my-server kernel: [2812442.751321] [<ffffffff81125060>] generic_writepages+0x40/0x60
Nov 19 06:05:22 my-server kernel: [2812442.751324] [<ffffffff811266c5>] do_writepages+0x35/0x40
Nov 19 06:05:22 my-server kernel: [2812442.751327] [<ffffffff811a7be0>] __writeback_single_inode+0x40/0x210
Nov 19 06:05:22 my-server kernel: [2812442.751329] [<ffffffff811a8915>] writeback_sb_inodes+0x195/0x400
Nov 19 06:05:22 my-server kernel: [2812442.751332] [<ffffffff811a8c1f>] __writeback_inodes_wb+0x9f/0xd0
Nov 19 06:05:22 my-server kernel: [2812442.751334] [<ffffffff811a8e83>] wb_writeback+0x233/0x2b0
Nov 19 06:05:22 my-server kernel: [2812442.751337] [<ffffffff811a9665>] wb_do_writeback+0x1e5/0x1f0
Nov 19 06:05:22 my-server kernel: [2812442.751340] [<ffffffff811a96ea>] bdi_writeback_workfn+0x7a/0x1d0
Nov 19 06:05:22 my-server kernel: [2812442.751342] [<ffffffff8106fb3b>] process_one_work+0x16b/0x3e0
Nov 19 06:05:22 my-server kernel: [2812442.751345] [<ffffffff810704d1>] worker_thread+0x121/0x3b0
Nov 19 06:05:22 my-server kernel: [2812442.751347] [<ffffffff810703b0>] ? manage_workers.isra.23+0x2b0/0x2b0
Nov 19 06:05:22 my-server kernel: [2812442.751350] [<ffffffff810765a0>] kthread+0xc0/0xd0
Nov 19 06:05:22 my-server kernel: [2812442.751352] [<ffffffff810764e0>] ? kthread_create_on_node+0x120/0x120
Nov 19 06:05:22 my-server kernel: [2812442.751355] [<ffffffff814be2ac>] ret_from_fork+0x7c/0xb0
Nov 19 06:05:22 my-server kernel: [2812442.751357] [<ffffffff810764e0>] ? kthread_create_on_node+0x120/0x120
After this load average slowly gets to 300 , some services die and server does not reboots on reboot command and even sysrq does not helped today (echo "s" | tee /proc/sysrq-trigger ; echo "u" | tee /proc/sysrq-trigger ; echo "b" | tee /proc/sysrq-trigger).
Help me pleace :-).

Lone_Wolf wrote:
i'm a newbie when it comes to call traces, but i do see a lot of reiserfs related messages.
I'd check for harddrive problems, and if you use diskquota verify they are not the cause.
I have checked "smartctl -a" output and it show zerro Reallocated_Sector_Ct counters on both drives (I use soft raid-1 and I cannot run longtime disk checks). Also I have umounted /dev/md1 (this is separate partition for ftp service and assuming that trace contains strings about vsftpd) and checked it with reiserfsck -- no errors. Then I've mounted it back and checket quotas -- all seems fine. I cannot turn off quotas.
Seems that I get underground knocking problem :-) or electromagnetic compatibility problem ...

How do we know currently active call time in 6680?

How do we know currently active call time? Whenever we receive or make a call, how can we know the call duration in Nokia 6680?

Hello!
Just take a look on page 27 of Manual.
Recent calls: Connect -> Log -> Recent calls.
Steps to activate call duration as follows: Connect -> Log -> Options -> Settings -> Show call duration. Select Yes.
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

What is the command to check if there are any active calls before restarting the voice router?

what is the command to check if there are any active calls before restarting the voice router? thanks

Hi.
I can suggest show call active voice or show voice call status or show sip-ua call brief in case of SIP TSP.
HTH
Regards.
Carlo

My bluetooth headset connects, but it is not a source option on an active call. Why?

I get an icon indicating that the plantronics M1100 headset is connected and working properly on my display. The headset even asks me if i want to answer incoming calls. But when i say "answer", i can only use the handset or speaker phone. I cannot get an active call to go to my headset. This just started happening. If there is a setting i am missing in the iPhone 4s please let me know. thanks!

I am suddenly having a similar issue with my Motorola H17 bluetooth headset. it is pairing/connected with my iphone 4. i can use the voice control feature to dial a number. but i cannot get any audio and cant answer calls from the headset.

Why iphone doesn't tell me when i call someone having an active call that i am on waiting?

why iphone doesn't tell when i call someone having an active call that i am on waiting?

hey i had the same problem, look and i fixed it just slightly tighten the 2 screws on the bottom of the phone with the tip of the knife or a small screw driver!! and now my phone works perfectly
guys it really worked trust me

Active call trace (on E1 line or in callmanager 3.3)

Similar Messages

Maybe you are looking for