Active clickboxes on last slide

Hi guys,
Does anyone know how to keep multiple clickboxes active indefinitely on the last slide?
I have 4 clickboxes at the very end of my project, with each directing the end user to related resources / popup email to a contact person. I'd "pause project until user clicks" for all 4 clickboxes. This slide runs for 6 secs.
However, if I go on and click one of these clickboxes and, say, read a related outgoing PDF and THEN come back again to this last slide to click on the other 3 clickboxes, the project would have finished, stopped and these 3 wouldn't be active anymore.
Any tricks to keep them active?
Thanks a lot in anticipation...

Hi there
See if the link below helps with that.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Stop on last slide with active buttons

Hi everyone,
Am still a beginner with Captivate...please help:
I've got 4 buttons set up on the last slide of Movie1, functioning as a simple menu, sort of.
First button goes to Movie 2, second button jumps to Movie 5, third button jumps to Movie 8, with a last WATCH ALL button starting from Movie 2 as well. All these movies are linked to each other (ie. movie 3 starts when movie 2 finishes).
How do I get the Movie1 to stop on the last slide, with all 4 buttons remaining active?
In my published exe, the buttons work if and only if I click on them before the project comes to a stop.
Thanks loads in advance!

Hello again
While you can't really accomplish it with the Buttons as they stand, you can do something I did. Be creative! I inserted some "disabled" images of the buttons. Staged the images to be present when the Buttons could not be clicked. Then configured the Buttons to appear at the times when I wanted them to.
Here's a hint. If the Buttons are always in the same place, you may insert the "disabled" image on the first slide and configure it to display for the rest of the project.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to find a customer who does not have any activity in the last 5 years

HI all,
How to find a customer who does not have any activity in the last 5 years.
Thanks & Regards,
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Jan 3, 2011 2:20 PM

Post Author: tzinser
CA Forum: Formula
Okay, I left off a lot of important information...
I'm using two tables
TWDATA
EVENT
From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
The two tables are linked by OrderNumber.

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am

From within Photoshop Elements, when I try to open Editor, a box opens that states I must activate the software. I registered and activated the software last year. When I click to activate, I get a message that I am not connected to the internet. I am connected. How do I get Editor to work?

You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

I just update to ios6 and mi wifi blow up, the activation button does not slide to on position, is blocked

I just update to ios6 and mi wifi blow up, the activation button does not slide to on position, is blocked

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

How to keep the last slide image in the background during loading transition??

Does anyone have any good strategies for using the last slide as a static background image when one swf file transitions to another during the loading process? Basically, I'd like to keep the loading image ontop of the last slide during the transition.

Does this fairly recent post help?
http://forums.adobe.com/thread/561129
Erik

Grey Screen in iPad Content Viewer when swipe through the last slides of the articles

Some of co-workers and clients reported and issue with the presentations and the viewer: some times grey screens appear when swiping in an presentation from article to article (reproducible only for the last slide of the article).
Pre-conditions:
1. Folio with several articles (3-4 is good).
2. Articles should have different number of slides.
Steps to reproduce:
1. Open folio on iPad and go to the last slide of each article.
2. Swipe from article to article (better from the first one article to the last one)..
Expected outcome: Last slide of the next article is displayed.
Actual outcome: Grey screen is displayed instead of the last article. Some times it's needed to swipe fast to reproduce the issue. Or at least on the last slide you'll see grey screen instead of the content.
Content will be displayed if you scroll up the page. Seems that new (additional) page is added after the last slide of an article and disappeared after scrolling the page.
Notes: Reproducible with the latest version of adobe viewer (i'm using v31(3.4.3.0.96281). NOT reproducible in iPad Content Viewer with version 3.2.1.3.85505.
Maybe somebody knows the root cause of this issue and how to fix it?

I can confirm that I've seen this happen but beyond that, I can't help.

MOV exported from Keynote - last slide disappears, audio continues playing

I have a series of three mov files that were created in & exported from Keynote. They are audio & slide shows that are to autoplay on a website. Two of the files function as expected once embedded in the website, one does not; the last slide drops out (displaying a white screen) while the audio continues for approximately 30 seconds until the mov file ends. To add confusion to the issue ALL the files play as expected using Safari (on Win & Mac). Using Firefox on Mac delivers the "broken" results. Using ANY browser on Windows yields the broken result.
Any suggestions from anyone as to what could be causing this? A link to the website I'm talking about is below. The problem file is on index2.html

Hi,
Since I am trying to do a number of things with Keynote, I read these discussions looking for opportunities and pitfalls.
I read your message, and saw your outcome as an issue. Since I've yet to add the soundtrack to my current project, I needed to know more about the outcome before I proceeded, in order to adjust accordingly.
I took my project, and added a song as the soundtrack. I played the slideshow, and the soundtrack played along, across the slides as it should. I then began to record the slideshow, but the soundtrack came playing through the speakers and was being picked up by the microphones, so I offed the speakers, donned my headphones, and re-began the recording. The soundtrack was playing (in the headphones), and I was narrating across many slides.
I played the recorded slideshow, and all was present - soundtrack and recorded narration.
I exported to Quicktime, sending the output to a new folder so that it could easily be found, along with anything else that might be generated. Upon completion, there was only one movie file in the folder. I opened and played it in Quicktime. It was perfect - slides looked good, narration was there, and the soundtrack was playing in the background.
This outcome appears to be your objective, so I'm not sure what I did differently than you, but from this experience, it works as should be expected.
Good luck.

Audio on last slide after quiz questions not playing

Captivate v5.5
I have a project with a question pool and a series of random questions
The random question slides are without audio.
After finishing the question pool the project closes with the final slide which does have some audio - which runs fine when I test the slide.
However when I test the whole project (F12) the audio on the last slide does not play.
The audio on the slides prior to the random question slides plays without any problem.
Any ideas please?
Noel

Anjaneai,
Thanks for the suggestion. But changing the question setting to infinite attempts will just allow the user to retry each question over and over until they get it correct. I want to give them one chance to answer each question for the entire quiz. Then, if they don't pass, they can try the entire quiz again.
I ended up finding a resolution, though. Based on one of the suggestions from this blog, I just shortened my slide time for each question to .5 sec (it was originally 3 sec). That seemed to do the trick!
http://blog.icslearninggroup.com/2011/12/adobe-captivate-quirks.html
Kristin

Iphoto slideshow (9.5.1)is playing backwards. last slide to first.

My iphoto slideshow is playing backwards - last slide first. How can I reverse that?

Are you using an instant slideshow from an album? Instant slideshows cannot be manually sorted. Create a regular slideshow project with "File > New Slideshow". Then you have a better control about the arrangement of photos in the slideshow.

Only last slide showing when recording a Software Simulation in CP5

I'm working on a series of lessons about a database application. I've recorded 3 lessons with no problems. Of course today is different. I've set CP5 up to record a new set of screens and when I finish recording only the last slide is showing up on the filmstrip. I've checked and it isn't on FMR. Any ideas. I've ran through the simulation 3 times making sure I've clicked somewhere on each screen I want it to capture and no luck.
Thanks for any and all help.
Susan

I have the sound turned down since I work in a cubical.
The problem resolved when I rebooted the computer.
Thanks
Susan Wright (Equilady)
Remember, the mighty oak was just a nut that held its ground.
http://www.equilady.com

How do you set the End Action on last slide of slideshow

Encore DVD CS3.
I must be the village idiot. I have setup a slideshow with manual advance. I cannot find a way to set the end action for the last slide. When I click on the last slide in the slideshow timeline there is no option that I can find for end action. When I preview the slideshow the last slide goes to black. I set the manual advance for all slides. There is several mentions of end action but no info on how to do it.
Appreciate advice. Very frustrating.
Clif
BTW Why are there no reference books for Encore CS3? It seems very strange. It has been out for a while but NO books.

Thank you for your help. I did what you said but the last slide still goes to black. The last slide also ignores the "manual Advance" and goes to black.
I highlighted the slideshow timeline in the project window and set end action on the properties panel on the right to the slideshow itself. But the last slide quickly goes to black. Each slide except the last one has a box in the upper right corner indicating a cross dissolve transition. I set the slide duration to "manual advance" for the whole slideshow. I feel like an idiot but nothing seems to change the end action of the slideshow or the last slide. Always cuts to black and stops.
Clif

How to make last slide of course send completion data?

Is there a way to make the last slide of a course send completion data? (SCORM 1.2)
...If that's not possible, is there a way to make a button on the last slide that the user clicks to send completion data?

I am looking for the same thing. Did you figure this out?

Clicking a button returns a user to the last slide he/she visitied

Is there a way in Captivate to create a button that will
return a user to the last slide he/she visited instead of going
back to a previous slide?

I guess not, if you are saying that the "Previous Slide"
won't work. Just so I don't get too lost, are you saying that the
previous slide is
not what the user viewed last? As in, they got to this slide
through a "jump" from another.
I wonder if Java-script's "history" command could help. I
don't think so, because it doesn't involve a HTML document history,
and to my knowledge, there is no Flash action-script equivalent for
that Java-script call ... (???)
Captiv8tor usually follows along behind me looking to add his
version of help to my posts, so maybe he can give us more
information on the use of Java-script or Action-script to
accomplish what you need. Good luck! Larry

End of Last Slide In Module

When the last slide of my module exits right before it fades out it plays the audio from the first slide in my module. This weird and I can not figure out what is causing it. Its this a bug?

Yes, that is a new feature.
Might want to hit F1 and read what is new in 7.1 and 7.2.

Active clickboxes on last slide

Similar Messages

Maybe you are looking for