Active direct user authentication

I need a VI that user validation using the Active Directory (AD), that is, the usuario informs its login and password and the vi returns true or false...

Sorry for these troubles. I have sent you a private message on this issue.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

User Authentication error when trying to order new 7232-P2

So I got the email and when I click on the picture to order it and log in, it gives me a user authentication error and tells me to hit the back button to try again. Ive tried using my account number/zip code combo and logged into My Verizon with no luck. Tried multiple browsers as well.
One thing I noticed, when I use my account #/zip code the back button appears fine, when I log into my verizon the back button ceases to exist and I cannot go back to try again.
I can log into My Verizon and view my account with out issue so Im not sure what is going on and if a tech could help me push this order through that would be great.

Sorry for these troubles. I have sent you a private message on this issue.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

BBID user authentication required

Keep getting messages "BBID user authentication required" Spoke to my newtwork supplier who told me another email address is registered instead of my email addrress and therefore can't complete BBID user authentication and they can't change the email address but phone is registered to me. Please help!

Hi and Welcome to the Community!
No one here can change what is in the BBID system...if you need your specific BBID account (e.g., need to keep BBM contact records, BBWorld purchase records, etc.), then only your carrier can help, either themselves or by escalating you up to BB formally. No one here can do that.
On the other hand, if you need nothing related to your existing BBID, then abandon it and create a new one. You do that by wiping your device and, during the initial setup, creating a new BBID. Be sure, before you do so, that you carefully review the Backup link in my auto-sig on this post.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Report on Active Directory User Attributes in SCCM 2012

I need to output a list of all users in a collection, along with certain user attributes from Active Directory. I can get part of what I need with the following query:
SELECT v_FullCollectionMembership.ResourceID,
v_R_User.Windows_NT_Domain0,
v_R_User.Distinguished_Name0,
v_R_User.Full_User_Name0,
v_R_User.Mail0,
v_R_User.User_Name0
FROM v_FullCollectionMembership, v_R_User
WHERE v_FullCollectionMembership.ResourceID = v_R_User.ResourceID
AND v_FullCollectionMembership.CollectionID = 'SMS00002'
If possible I need to add:
Last logon timestamp
User account status (enabled or disabled)
I have added "lastLogon" and "lastLogonTimestamp" as additional attributesunder Active Directory User Discovery. This discovery method is enabled and I have run a full discovery about a month ago, and again today. I read in
another thread that these attributes should appear in the table v_R_User, however they have not. Is v_R_User the right place to look for this or is there another view or table I can query?
Once I have the above sorted out, how can I find the user account status in SCCM? I have done reports in the past directly from AD and used the 'useraccountcontrol' attribute and I noticed there is a column named 'User_Account_Control0' in v_R_User, however
the values do not match those found in Active Directory.
Thanks.

Have you checked the attribute from the Active Directory in decimal format? Check that and compare it to the value ConfigMgr has stored in its 'User_Account_Control0'...
User Account Control tells you multiple things of the account, for example does the account have "Smart card login required" -option checked from the account properties.
The tricky part here is to actually get the report show you what you really want, because "useraccountcontrol" -attribute is a numeric value, you have to calculate what decimal combination means what in readable text.
More info on the attribute can be found from here
http://support.microsoft.com/kb/305144 and from there you can also find the values for different settings. For example:
account is enabled = 512
account is disabled = 514
account is enabled with smart card = 262656

11gr2 Active Directory User Target Delete Recon Search Root

Hi All,
latest AD conector with the patch.
Have a situation where I need to change the root or base search for the delete recon. by default it seams to want to search at the domain level but that won't work for us. Checked the doc and can't seem to find anyway to change this for the delete recon.
Thanx in advance
Fred

Hi,
The issue is still pending. I am specifying the following parameters for the scheduled job :
Batch Size : 100
Object Type : User
Batch Start : 1
Resource Object Name : AD User
Filter : startsWith('samAccountName','c')
Scheduled Task Name : Active Directory User Target Recon
Incremental Recon Attribute : uSNChanged
Search Base : <blank>
IT Resource Name : Active Directory
Search Scope : subtree
Latest Token : <blank>
Sort By : samAccountName
Number of Batches : All
Sort Direction : asc
The job runs successfully but no records are reconciled into UD_ADUSER table and the job reports the following error in the logs :
[2012-10-25T02:32:04.785-07:00] [oim_server1] [ERROR] [] [org.quartz.impl.jdbcjobstore.JobStoreCMT] [tid: QuartzScheduler_OIMQuartzScheduler-iamoimdev-v1.capgroup.com1351057898397_MisfireHandler] [userId: oiminternal] [ecid: 80eeb34d89d5ed80:-343bffe9:13a9150ba30:-8000-0000000000000005,1:24567] [APP: oim#11.1.2.0.0] MisfireHandler: Error handling misfires: Unexpected runtime exception: null[[
org.quartz.JobPersistenceException: Unexpected runtime exception: null [See nested exception: java.lang.NullPointerException]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3042)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
Caused by: java.lang.NullPointerException
at org.quartz.SimpleTrigger.computeNumTimesFiredBetween(SimpleTrigger.java:800)
at org.quartz.SimpleTrigger.updateAfterMisfire(SimpleTrigger.java:514)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doUpdateOfMisfiredTrigger(JobStoreSupport.java:944)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.recoverMisfiredJobs(JobStoreSupport.java:898)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3029)
Edited by: IDM_newbie on Oct 25, 2012 2:38 AM

Activation of User status for Prod. order

Hi,
I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
the requirement is after settlement the user status should get activated for production order.
Regards
Amit Parkhi

Hi Amit,
As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
Pls. go through the following procedure for activating the User Status :
Activating User Statuses
Use
You can activate a user status at order header and at operation level.
Procedure
Order Header Level
Go to the order header.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Operation Level
Go to the operation overview.
Select the operation in question.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Pls. follow the above procedure as per rquirement and set user status accodingly.
Pls. revert if any doubt and reward if useful.
Regards,
Tejas
Edited by: Tejas Pujara on Jun 23, 2008 8:10 AM
Edited by: Tejas Pujara on Jun 23, 2008 8:11 AM

Open Directory Active Directory users want to know Is there a method?

Help
Open Directory Active Directory users want to know Is there a method?
Or can I make the Active Directory users to share on the Open Directory.
My goal is to use our school Mac computers with SSO

If I understand your question correctly, using Active Directory with OSX, there are a few ways this can be accomplished.
One way is by joining each Mac directly to Active Directory. This doesn't take advantage of the additional managed preference available to OSX, but does allow AD users to authenticate on OSX. On each machine, one would open System Preferences > Accounts > Login Options > Click Join next to Network Account Server. Follow the prompts and provide the domain name of your Active Directory deployment to join the system.
Another method is to follow the steps above, but only after extending the Active Directory Schema to support the OSX-specific managed preferences. It's a mostly harmless operation and means that you'll have a single administration interface for both OSX and Windows systems. The AD Schema information is available from Apple Support, but may also be readily available on the Internet.
Because our Windows team preferred to not change our AD schema any more than we already had, we used a different method. We created an Open Directory Master on one of our OSX servers, then we joined it as a member server to Active Directory. Next, we join all of our OSX workstations and laptops as members to the Open Directory domain instead of to Active Directory. This way, SSO still works. New user accounts are added to Active Directory and all managed preferences for OSX can be managed through the native OSX Workgroup Manager tool.
I think there are some instructions in the User Management PDF (Mac OS X Server, User Management, Version 10.6 Snow Leopard) or in the Advanced Server Admin PDF (Mac OS X Server, Advanced Server Administration, Version 10.6 Snow Leopard) but not completely certain. This page might have the docs.

Cannot log into DTR with Active Directory User

Greetings,
I have set up and installed JDI correctly. I can log into /devinf, the cbs, cms and sld systems with no problem using both Administrator and my JDI.Administrator that I assigned to an Active Directory user. I can log into the DTR using a user from the database (i.e. Administrator), however, when trying to access the DTR with an Active Directory user, I get the following message:
500 Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during the request procession.
Details: Error [javax.servlet.ServletException: Group found, but unique name "businessUnit.all.guests" is not unique!], with root cause [com.tssap.dtr.server.deltav.InternalServerException: Group found, but unique name "businessUnit.all.guests" is not unique!]. The ID of this error is
Exception id: [0012798F81680042000000090000165C0003FE9AA3C0B86B].
This group exists in multiple domainshowever, this has not caused us any issues to date with our portal and other pieces of SAP WASit's only this DTR error.
Any help is greatly appreciated.
Thanks,
Marty

Hi Marty,
In the document available at the link enclosed below, there is a part that explains how to configure DTR so that it always uses "Unique-IDs".
http://help.sap.com/saphelp_nw04/helpdata/en/20/f4a94076b63713e10000000a155106/frameset.htm
It is mentioned that this is valid for LDAP, but the information is applicable for Active Directory as well.
Regards,
Manohar

What do I need to do to enable Active Directory users to authenticate to AFP shares in 10.8 server?

We recently upgraded from 10.6 server to 10.8 server and are having trouble with AFP shares and Active Directory. We have shares on each of our OS X servers that should be mountable by any Active Directory user at the site the server resides. In 10.6, this worked beautifully. Simply adding the appropriate AD groups with appropriate permissions to the ACL of the folder(s) being shared worked without a hitch. In 10.8 server, this is not working. Permissions are defined correctly (as far as I can tell), the server is bound to AD, but yet no AD user who should have access can mount the share. When attempting to mount the share on a 10.6 client, the user gets the short and simple "You entered an invalid username or password. Please try again." On a 10.7 client, the window shakes.
What confuses me even more is that no local users can mount the share as well. I try as our admin account, I receive the following error message on our 10.6 clients:
Actually, as I was forumulating this post, logging in as the server administrator account is now working...???!!!
This was the error message we were receiving on 10.7 clients before it magically started working:
In any case, authenticating as an AD user is still no go. Any ideas?

I had something similar to this. In the name field put in DOMAIN\username rather than just the name.

Issue with Active Directory User Target Recon

Hi ,
I am facing an issue with Active Directory User Target Recon
My environment is OIM 11g R2 with BP03 patch applied
AD Connector is activedirectory-11.1.1.5 with bundle patch 14190610 applied
In my Target there are around 28000 users out of which 14000 have AD account (includes Provisioned,Revoked,Disabled accounts)
When i am running Active Directory User Target Recon i am not putting any filter cleared the batch start and batch size parameters and ran the recon job .Job ran successfully but it stopped after processing around 3000 users only.
Retried the job two three times but every time it is stopping after processing some users but not processing all the users.
Checked the log file oimdiagnostic logs and Connector server logs cannot see any errors in it.
Checked the user profile of users processed can see AD account provisioned for users
My query is why this job is not processing allthe users.Please point if i am missing some thing .
thanks in advance

Check the connector server load when you are running the recon. Last time I checked the connector, the way it was written is that it loads all the users from AD into the connector server memory and then sends them to OIM. So if the number was huge, then the connector server errored out and did not send data to OIM. We then did recon based on OUs to load/link all the users into OIM. Check the connector server system logs and check for memory usage etc.
-Bikash

Windows 2008 Server - Cannot run Active Directory Users and Computers

Hi,
I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
I attempt to open Active Directory Users and Computers tool and I get a;
Microsoft Visual C++ Runtime Library error;
"The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
I click ok, then get the following debug info;
Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919524
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.6001.18000
Fault Module Timestamp: 4791ad6b
Exception Code: 40000015
Exception Offset: 0000000000029b06
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 3081
Additional Information 1: 43aa
Additional Information 2: cf3a46656318492c1997480001b6b0e0
Additional Information 3: 3837
Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
If someone could please assist, it would be very much appreciated.
Regards
B

Hi,
To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
However, I am also glad to share my research.
Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
Also, please follow the article below to perform necessary steps to see how it's going?
FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
http://support.microsoft.com/kb/190536/en-us
Hope this helps.
Best wishes
Morgan Che

How to populate active directory users in to drop down list items dynamically in Share point 2010 ?

Hi My self Arun in my current project i have a task on that active directory user need to automatically populate in share point list drop down please help me. is that any out of box feature in share point 2010 ?
Thanking You
Arun

Arun,
If you plan to implement the "Querying the Active Directory" based on my code snippet,
and if you do not have permission [your account must be the part of domain admin] to do so,
Then still you can do it in least effort through code,
string usersInXml = SPContext.Current.Web.AllUsers.Xml;your xml string look like this.
<Users><User ID="2" Sid="" Name="Administrator"
LoginName="i:0#.w|murugesan\administrator" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1" Sid="" Name="Murugesa Pandian" LoginName="i:0#.w|murugesan\murugesan" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1073741823" Sid="S-1-0-0" Name="System Account" LoginName="SHAREPOINT\system" Email="" Notes="" IsSiteAdmin="False" IsDomainGroup="False" Flags="0" /></Users>
You can user Linq to XML to filter the "LoginName,Name and Email and then populate your drop down list.
* User must be logged into the site at least once.
Murugesa Pandian.,MCTS|App.Devleopment|Configure

How to import your MS Active Directory users in an Oracle table

Hello,
I first tried to get a Heterogenous Connection to my MS Active Directory to get information on my Active Directory users.
This doesn't work so I used an alternative solution:
How to import your MS Active Directory users in an Oracle table
- a Visual Basic script for export from Active Directory
- a table in my database
- a SQL*Loader Control-file
- a command-file to start the SQL*Loader
Now I can schedule the vsb-script and the command-file to get my information in an Oracle table. This works fine for me.
Just to share my scripts:
I made a Visual Basic script to make an export from my Active Directory to a CSV-file.
'Export_ActiveDir_users.vbs                              26-10-2006
'Script to export info from MS Active Directory to a CSV-file
'     Accountname, employeeid, Name, Function, Department etc.
'       Richard de Boer - Wetterskip Fryslan, the Nethterlands
'     samaccountname          Logon Name / Account
'     employeeid          Employee ID
'     name               name
'     displayname          Display Name / Full Name
'     sn               Last Name
'     description          Description / Function
'     department          Department / Organisation
'     physicaldeliveryofficename Office Location     Wetterskip Fryslan
'     streetaddress          Street Address          Harlingerstraatweg 113
'     l               City / Location          Leeuwarden
'     mail               E-mail adress
'     wwwhomepage          Web Page Address
'     distinguishedName     Full unique name with cn, ou's, dc's
'Global variables
    Dim oContainer
    Dim OutPutFile
    Dim FileSystem
'Initialize global variables
    Set FileSystem = WScript.CreateObject("Scripting.FileSystemObject")
    Set OutPutFile = FileSystem.CreateTextFile("ActiveDir_users.csv", True)
    Set oContainer=GetObject("LDAP://OU=WFgebruikers,DC=Wetterskip,DC=Fryslan,DC=Local")
'Enumerate Container
    EnumerateUsers oContainer
'Clean up
    OutPutFile.Close
    Set FileSystem = Nothing
    Set oContainer = Nothing
    WScript.Echo "Finished"
    WScript.Quit(0)
Sub EnumerateUsers(oCont)
    Dim oUser
    For Each oUser In oCont
        Select Case LCase(oUser.Class)
               Case "user"
                    If Not IsEmpty(oUser.distinguishedName) Then
                        OutPutFile.WriteLine _
               oUser.samaccountname      & ";" & _
               oUser.employeeid     & ";" & _
               oUser.Get ("name")      & ";" & _
               oUser.displayname      & ";" & _
               oUser.sn           & ";" & _
               oUser.description      & ";" & _
               oUser.department      & ";" & _
               oUser.physicaldeliveryofficename & ";" & _
               oUser.streetaddress      & ";" & _
               oUser.l           & ";" & _
               oUser.mail           & ";" & _
               oUser.wwwhomepage      & ";" & _
               oUser.distinguishedName     & ";"
                    End If
               Case "organizationalunit", "container"
                    EnumerateUsers oUser
        End Select
    Next
End SubThis give's output like this:
rdeboer;2988;Richard de Boer;Richard de Boer;de Boer;Database Administrator;Informatie- en Communicatie Technologie;;Harlingerstraatweg 113;Leeuwarden;[email protected];;CN=Richard de Boer,OU=Informatie- en Communicatie Technologie,OU=Afdelingen,OU=WFGebruikers,DC=wetterskip,DC=fryslan,DC=local;
tbronkhorst;201;Tjitske Bronkhorst;Tjitske Bronkhorst;Bronkhorst;Configuratiebeheerder;Informatie- en Communicatie Technologie;;Harlingerstraatweg 113;Leeuwarden;[email protected];;CN=Tjitske Bronkhorst,OU=Informatie- en Communicatie Technologie,OU=Afdelingen,OU=WFGebruikers,DC=wetterskip,DC=fryslan,DC=local;I made a table in my Oracle database:
CREATE TABLE     PG4WF.ACTD_USERS
     samaccountname          VARCHAR2(64)
,     employeeid          VARCHAR2(16)
,     name               VARCHAR2(64)
,     displayname          VARCHAR2(64)
,     sn               VARCHAR2(64)
,     description          VARCHAR2(100)
,     department          VARCHAR2(64)
,     physicaldeliveryofficename     VARCHAR2(64)
,     streetaddress          VARCHAR2(128)
,     l               VARCHAR2(64)
,     mail               VARCHAR2(100)
,     wwwhomepage          VARCHAR2(128)
,     distinguishedName     VARCHAR2(256)
)I made SQL*Loader Control-file:
LOAD DATA
INFILE           'ActiveDir_users.csv'
BADFILE      'ActiveDir_users.bad'
DISCARDFILE      'ActiveDir_users.dsc'
TRUNCATE
INTO TABLE PG4WF.ACTD_USERS
FIELDS TERMINATED BY ';'
(     samaccountname
,     employeeid
,     name
,     displayname
,     sn
,     description
,     department
,     physicaldeliveryofficename
,     streetaddress
,     l
,     mail
,     wwwhomepage
,     distinguishedName
)I made a cmd-file to start SQL*Loader
: Import the Active Directory users in Oracle by SQL*Loader
D:\Oracle\ora92\bin\sqlldr userid=pg4wf/<password>@<database> control=sqlldr_ActiveDir_users.ctl log=sqlldr_ActiveDir_users.logI used this for a good list of active directory fields:
http://www.kouti.com/tables/userattributes.htm
Greetings,
Richard de Boer

I have a table with about 50,000 records in my Oracle database and there is a date column which shows the date that each record get inserted to the table, for example 04-Aug-13.
Is there any way that I can find out what time each record has been inserted?
For example: 04-Aug-13 4:20:00 PM. (For my existing records not future ones)
First you need to clarify what you mean by 'the date that each record get inserted'. A row is not permanent and visible to other sessions until it has been COMMITTED and that commit may happen seconds, minutes, hours or even days AFTER a user actually creates the row and puts a date in your 'date column'.
Second - your date column, and ALL date columns, includes a time component. So just query your date column for the time.
The only way that time value will be incorrect is if you did something silly like TRUNC(myDate) when you inserted the value. That would use a time component of 00:00:00 and destroy the actual time.

How to create "folders" in Active Directory Users and Computers?

Hello Community
    In Windows Server 2008R2 when you go to Active Directory Users and Computer
you will see icons of folders such as:
    - Builtin has a folder icon
    - Computers has a folder icon
    - ForeignSecurityPrinicpals has a folder icon
    - Domain Controller as a folder icon
    - Managed Service Accounts has a folder icon
    - Users has a folder icon
    All of the above folders are visually identical.
    If you right click and select “File” – “New”
on any of the selections the icon
will not look like the folder icon they have their own icons which look different
from the "Folder" icon.
    I would like to create a “Folder” that looks just visually exactly like the ones
mentioned above, how can I create those types of Folders in Active Directory User
and Computers?
    Note: I would like to put users in the folders.
    Thank you
    Shabeaut

Hi,
you should use OUs (an OU is they type of object (folder) that is available for you to easily create.
The object type you are asking about is a "container", and there are various reasons why an OU is more flexible (applying GPO, etc).
Refer: Delegating Administration by Using OU Objects
http://technet.microsoft.com/en-us/library/cc780779(v=ws.10).aspx
and the sub-articles:
Administration of Default Containers and OUs
http://technet.microsoft.com/en-us/library/cc728418(v=ws.10).aspx
Delegating Administration of Account and Resource OUs
http://technet.microsoft.com/en-us/library/cc784406(v=ws.10).aspx
Also: http://technet.microsoft.com/en-us/library/cc961764.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Best practice for Active Directory User Templates regarding Distribution Lists

Hello All
I am looking to implement Active Directory User templates for each department in the company to make the process of creating user accounts for new employees easier. Currently when a user is created a current user's Active directory account is copied, but
this has led to problems with new employees being added to groups which they should not be a part of.
I have attempted to implement this in the past but ran into an issue regarding Distribution Lists. I would like to set up template users with all group memberships that are needed for the department, including distribution lists. Previously I set this up
but received complaints from users who would send e-mail to distribution lists the template accounts were members of.
When sending an e-mail to the distribution list with a member template user, users received an error because the template account does not have an e-mail address.
What is the best practice regarding template user accounts as it pertains to distribution lists? It seems like I will have to create a mailbox for each template user but I can't help but feel there is a better way to avoid this problem. If a mailbox is created
for each template user, it will prevent the error messages users were receiving, but messages will simply build up in these mailboxes. I could set a rule for each one that deletes messages, but again I feel like there is a better way which I haven't thought
of.
Has anyone come up with a better method of doing this?
Thank you

You can just add arbitrary email (not a mailbox) to all your templates and it should solve the problem with errors when sending emails to distribution lists.
If you want to further simplify your user creation process you can have a look at Adaxes (consider it's a third-party app). If you want to use templates, it gives you a slightly better way to do that (http://www.adaxes.com/tutorials_WebInterfaceCustomization_AllowUsingTemplatesForUserCreation.htm)
and it also can automatically perform tasks such as mailbox creation for newly created users (http://www.adaxes.com/tutorials_AutomatingDailyTasks_AutomateExchangeMailboxesCreationForNewUsers.htm).
Alternatively you can abandon templates at all and use customizable condition-based rules to automatically perform all the needed tasks on user creation such as OU allocation, group membership assignment, mailbox creation, home folder creation, etc. based on
the factors you predefine for them.

Active direct user authentica​tion

Similar Messages

Maybe you are looking for

Active direct user authentication