Active directory domain services stopped after removing routing and remote access role

Hello everyone;;
I am in deep trouble.. I did install routing and remote access and then lost connection to the server remotely. Then I connected a monitor to the server and removed the role... then it asked me to restart the server . After logging back in I found
all my active directory service has gone... I can see red cross on active directory domain services.. Also I am able to ping other pcs but other pcs cannot ping my server..
However when I go into the active directory services, it shows all services are running except file replication service. I have tried to start that service but it give error 1053 error..
My server in between loses LAN connection... I dont know what is going on.. Please help!!!
My server is win 2008 R2 ser pack 1
Only one DC....
Has fixed ip,
no DNS server running..

Hi,
The File Replication Service Start Error 1053 error can be caused by damaged Windows system files. Corrupted system files entries can threaten the well-being of your computer. Many events can result in creating system file errors.
Please refer to the articles below to troubleshoot the issue:
File Replication Service Start Error 1053
http://repairerrors.net/file-replication-service-start-error-1053.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Active Directory Domain Services crash after Administrator renames object in Active Directory Users and Computers

Hello.
We have two domain controllers - node1 (Windows 2008 R2) and node2 (Windows 2012 R2). When administrator connects to node2 and tries to rename some object in AD (for example, user) AD Domain Services crashes and reboot server after 60 seconds.
In Events I can see these messages:
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 04.03.2014 12:37:58
Event ID: 1173
Task Category: Internal Processing
Level: Warning
Keywords: Classic
User: domain\admin
Computer: NODE2.domain.example
Description:
Internal event: Active Directory Domain Services has encountered the following exception and associated parameters.
Exception:
c0000005
Parameter:
0
Additional Data
Error value:
7ffc7c38e45d
Internal ID:
0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
 <EventID Qualifiers="32768">1173</EventID>
 <Version>0</Version>
 <Level>3</Level>
 <Task>9</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8080000000000000</Keywords>
 <TimeCreated SystemTime="2014-03-04T06:37:58.116264800Z" />
 <EventRecordID>881</EventRecordID>
 <Correlation />
 <Execution ProcessID="572" ThreadID="2580" />
 <Channel>Directory Service</Channel>
 <Computer>NODE2.domain.example</Computer>
 <Security UserID="S-1-5-21-3794920928-4165619442-305938157-2047" />
</System>
<EventData>
 <Data>c0000005</Data>
 <Data>7ffc7c38e45d</Data>
 <Data>0</Data>
 <Data>0</Data>
</EventData>
</Event>
Log Name: Application
Source: Microsoft-Windows-Wininit
Date: 04.03.2014 12:37:58
Event ID: 1015
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NODE2.domain.example
Description:
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-Wininit" Guid="{206f6dea-d3c5-4d10-bc72-989f03c8b84b}" EventSourceName="Wininit" />
 <EventID Qualifiers="49152">1015</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>0</Task>
 <Opcode>0</Opcode>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2014-03-04T06:37:58.000000000Z" />
 <EventRecordID>189578</EventRecordID>
 <Correlation />
 <Execution ProcessID="0" ThreadID="0" />
 <Channel>Application</Channel>
 <Computer>NODE2.domain.example</Computer>
 <Security />
</System>
<EventData>
 <Data>C:\Windows\system32\lsass.exe</Data>
 <Data>c0000005</Data>
</EventData>
</Event>
Log Name: Application
Source: Application Error
Date: 04.03.2014 12:37:58
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: NODE2.domain.example
Description:
Faulting application name: lsass.exe, version: 6.3.9600.16384, time stamp: 0x5215e25f
Faulting module name: ntdsai.dll, version: 6.3.9600.16421, time stamp: 0x524fcaed
Exception code: 0xc0000005
Fault offset: 0x000000000019e45d
Faulting process id: 0x23c
Faulting application start time: 0x01cf3773fe973e1b
Faulting application path: C:\Windows\system32\lsass.exe
Faulting module path: C:\Windows\system32\ntdsai.dll
Report Id: 85cfbe32-a367-11e3-80cc-00155d006724
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Application Error" />
 <EventID Qualifiers="0">1000</EventID>
 <Level>2</Level>
 <Task>100</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2014-03-04T06:37:58.000000000Z" />
 <EventRecordID>189576</EventRecordID>
 <Channel>Application</Channel>
 <Computer>NODE2.domain.example</Computer>
 <Security />
</System>
<EventData>
 <Data>lsass.exe</Data>
 <Data>6.3.9600.16384</Data>
 <Data>5215e25f</Data>
 <Data>ntdsai.dll</Data>
 <Data>6.3.9600.16421</Data>
 <Data>524fcaed</Data>
 <Data>c0000005</Data>
 <Data>000000000019e45d</Data>
 <Data>23c</Data>
 <Data>01cf3773fe973e1b</Data>
 <Data>C:\Windows\system32\lsass.exe</Data>
 <Data>C:\Windows\system32\ntdsai.dll</Data>
 <Data>85cfbe32-a367-11e3-80cc-00155d006724</Data>
 <Data>
 </Data>
 <Data>
 </Data>
</EventData>
</Event>
In node2 we installed all available updates and hotfixes.

Hi Azamat Hackimov,
Regarding to error messages, it seems that the
ntdsai.dll file caused the issue. Based on current situation, please use
sfc /scannow command to scan protected system files and check if find error and repair. Meanwhile, you can also navigate to the location of this DLL file and confirm details.
In addition, Windows Server 2012 R2 has reboot unexpectedly. Please check if you get some dump file and then analysis it. It may help us to find the root reason. Please refer
to the following KB.
How to read the small dump memory dump file that is created by Windows if a crash occurs.
http://support.microsoft.com/kb/315263/en-us
By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

Routing and Remote access can cause cluster network issues?

After enabling routing and remote access on the servers, we found lots of cluster issues on our server like<o:p></o:p>
Cluster Service stopped
Communication was lost and reestablished between cluster nodes
Unable to access witness resource
Cluster resource failed
can RRAS enabling causes cluster network issues?
Rahul

Hi TwoR,
Please offer more information about your current cluster and RRAS configuration, such as are you installed the RRAS role on any cluster node? Are your cluster in Hyper-V environment?
Or if you want to create the RRAS cluster you can refer the following KB:
Deploy Remote Access in a Cluster
http://technet.microsoft.com/en-us/library/jj134175.aspx
How to configure Network Load Balancing (NLB) based cluster of VPN Servers
http://blogs.technet.com/b/rrasblog/archive/2009/07/02/configuring-network-load-balancing-nlb-cluster-of-vpn-servers.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Laptop (Running Windows 8.1) no longer able to print and now see message Active Directory Domain Services is not available

Have a very recent Lenovo Ideapad Laptop running Windows 8.1. Connected via USB port to HP LaserJet Pro CM1415 frw Color MFP Printer. Was able to print fine nearly 2 weeks ago, but something recently happened - either a new windows or office 2013 update
or perhaps I blew away a certain file by mistake. I can see the printer installed but cannot print to it from anything (Word, Notepad, IE, Firefox etc.). The one thing to note is that usually when I plug or unplug a USB related device, Windows 8.1 recognizes
this and makes a certain chime noise, but with the printer USB cable it never makes that noise - making me think that it never fully recognizes the printer. Also when I select the printer (from within the control panel) and right click for properties (via
admin rights) It never lets me fully connect to it.
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc. Its really annoying because this printer was working fine nearly 2
weeks ago. Looking for any advice now. Thanks.
-Chris

Hi Chris,
à
I have tried all the usual remedies - remove, install all drivers, reinstall printer, Windows update, start/stop print spooler and all other printer related services, etc.
I noticed that you had reinstalled the printer. Just a confirmation, when un-install this printer, please check
if this printer still exist in registry. For more details, please refer to following KB.
Registry entries for printing
If printer entry still exist in registry, please delete that printer entry and re-install this printer again,
then check if this issue still exists. (Please backup registry entries before operating registry. It will help us to avoid unexpected issue.)
àand now see
message Active Directory Domain Services is not available
By the way, would you please let me know where/when get this
Active Directory Domain Services is not available error message? Or provide a screenshot of it?
(Please hide all protected or private information) Please check if all services are running correctly on the computer. Meanwhile, please refer to following article and check if can help you.
Printer
Problem: Active Directory Domain Services is currently unavailable – Why does windows say no printers are installed?
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Cannot Print. "The Active Directory Domain Services is currently unavailable"

Hi there
I cannot print and I have not been able to find the fix via existing forum threads.
System:
Win 7 Ultimate 64 bit German - Profile language is Danish (installed a week ago and completely windows updated)
Office 365 Small Business Premium
HP DV8 Laptop. i7, 512GB SSD, 8GB RAM
HP LaserJet P1006 USB printer.
Problem
No matter if I try to print from IE, Notebook, Word 2013 or anything else, I cannot chose my printer (P1006).
If I try to Add Printer in Word 2013, I get the "The Active Directory Domain Services is currently unavailable" error.
In Devices and Printers, the P1006 is visible, but there is no driver installed.
Trying to install the correct driver:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3435683&prodTypeId=18972&prodSeriesId=3435682&swLang=8&taskId=135&swEnvOID=4063
only creates a general error during installation: "Printer Software Installer has stopped working - A problem has caused the program to stop working correctly. Windows closes the program and will notify you if a solution has been found"
I have tried all the solution software from Windows, from HP (for the laptop and for the printer) - but nothing comes up with any details or suggestions.
What should I try?
Absolutely everything else works perfectly on the system.
Reffered here via http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cannot-print-the-active-directory-domain-services/1cf47626-a2cd-4b7a-94b6-10cbc8ab02b0

Hi,
I suggest you try the following:
1. Try the steps in the following article:
Troubleshoot printer problems
http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
Fix printing problems by resetting the print spooler
http://support.microsoft.com/kb/2000007
2. Let us try updating the printer driver which might help you in resolving the issue.
Click on the link below for more information on updating the printer drivers.
Find and install printer drivers
http://windows.microsoft.com/en-US/windows-vista/Find-and-install-printer-drivers
3. Remove the printer and add it again:
Go to Control Panel
  Select Printers
  Right-click on Add Printer
  Select Run as Administrator
Now try to add your network printer
Also a thread for your reference:
Error message when attempting to print: Active Directory Domain Service is Currently Unavailable
http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/d6212275-24d6-4168-830a-9441f861cb76
Hope this helps.
Vincent Wang
TechNet Community Support

Failed to install Active directory domain services

Hi,
I've installed the AD Domain Services on Windows2008R2 by following this guide http://technet.microsoft.com/en-gb/library/cc755059%28WS.10%29.aspx. After click 'Install', step 6, it showed failed to install but there is no clue why it was failed, at all.
Here is a log I copied from C:\Windows\logs\ServerManager.log
2204: 2011-01-05 12:57:54.333 [InstallationProgressPage] Loading progress page...
2204: 2011-01-05 12:57:54.411 [InstallationProgressPage] Begining Sync operation...
2204: 2011-01-05 12:57:54.458 [Sync]
Sync Graph of changed nodes
==========
name : Active Directory Domain Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : Active Directory Domain Controller
guest[2] : Identity Management for UNIX
ant. : empty
pred. : empty
provider : null
name : Active Directory Domain Controller
state : Changed
rank : 4
sync tech: CBS
ant. : .NET Framework 3.5.1
pred. : Active Directory Domain Services, .NET Framework 3.5.1
provider : Provider
2204: 2011-01-05 12:57:54.458 [Sync] Calling sync provider of Active Directory Domain Controller ...
2204: 2011-01-05 12:57:54.473 [Provider] Sync:: guest: 'Active Directory Domain Controller', guest deleted?: False
2204: 2011-01-05 12:57:54.473 [Provider] Begin installation of 'Active Directory Domain Controller'...
2204: 2011-01-05 12:57:54.473 [Provider] Install: Guest: 'Active Directory Domain Controller', updateElement: 'DirectoryServices-DomainController'
2204: 2011-01-05 12:57:54.473 [Provider] Installation queued for 'Active Directory Domain Controller'.
2204: 2011-01-05 12:57:54.473 [CBS] installing 'DirectoryServices-DomainController ' ...
2204: 2011-01-05 12:57:55.020 [CBS] ...parents that will be auto-installed: 'NetFx3 '
2204: 2011-01-05 12:57:55.020 [CBS] ...default children to turn-off: '<none>'
2204: 2011-01-05 12:57:55.036 [CBS] ...current state of 'DirectoryServices-DomainController': p: Staged, a: Staged, s: UninstallRequested
2204: 2011-01-05 12:57:55.036 [CBS] ...setting state of 'DirectoryServices-DomainController' to 'InstallRequested'
2204: 2011-01-05 12:57:55.051 [CBS] ...current state of 'NetFx3': p: Installed, a: Installed, s: InstallRequested
2204: 2011-01-05 12:57:55.051 [CBS] ...skipping 'NetFx3' because it is already in the desired state.
2204: 2011-01-05 12:57:55.098 [CBS] ...'DirectoryServices-DomainController' : applicability: Applicable
2204: 2011-01-05 12:57:55.114 [CBS] ...'NetFx3' : applicability: Applicable
2204: 2011-01-05 12:57:55.770 [CbsUIHandler] Initiate:
2204: 2011-01-05 12:57:55.770 [InstallationProgressPage] Installing...
2204: 2011-01-05 12:58:49.176 [CbsUIHandler] Error: -2147021879 :
2204: 2011-01-05 12:58:49.176 [CbsUIHandler] Terminate:
2204: 2011-01-05 12:58:49.254 [InstallationProgressPage] Verifying installation...
2204: 2011-01-05 12:58:49.270 [CBS] ...done installing 'DirectoryServices-DomainController '. Status: -2147021879 (80070bc9)
2204: 2011-01-05 12:58:49.270 [Provider] Skipped configuration of 'Active Directory Domain Controller' because install operation failed.
2204: 2011-01-05 12:58:49.270 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
 'Active Directory Domain Controller'[STAT] installation(s) took '54.7870005' second(s) total.
[STAT] Configuration(s) took '0.0003053' second(s) total.
[STAT] Total time: '54.7873058' second(s).
2204: 2011-01-05 12:58:49.270 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 110
2204: 2011-01-05 12:58:49.286 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
made
2204: 2011-01-05 12:58:49.286 [InstallationProgressPage] Sync operation completed
2204: 2011-01-05 12:58:49.286 [InstallationProgressPage] Performing post install/uninstall discovery...
2204: 2011-01-05 12:58:49.286 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2204: 2011-01-05 12:58:49.286 [CBS] IsCacheStillGood: False.
2204: 2011-01-05 12:58:49.786 [CBS] >>>GetUpdateInfo--------------------------------------------------
2204: 2011-01-05 12:59:46.520 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
2204: 2011-01-05 12:59:46.520 [CBS] <<<GetUpdateInfo--------------------------------------------------
2204: 2011-01-05 12:59:46.598 [DISCOVERY] hr: -2147021879 -> reboot required.
2204: 2011-01-05 12:59:46.739 [InstallationProgressPage] About to load finish page...
2204: 2011-01-05 12:59:46.739 [InstallationFinishPage] Loading finish page
2204: 2011-01-05 12:59:46.801 [InstallationFinishPage] Finish page loaded
I also checked the event viewer, here are the event properties occurred during the installation:
Initiating changes to turn on update DirectoryServices-DomainController of package DirectoryServices-DomainController-Package. Client id: RMT
Update Directoryservices-DomainController of package DirectoryServices-DomainController-Package failed to be turned on. Status: 0x80070bc9
Installation failed. A restart is required.
Roles:
Active Directory Domain Services
Error: The server needs to be restarted to undo the changes
Please help.
Thanks,
balrogz

Another thing to check is to ensure the server service is up and running.
http://blogs.dirteam.com/blogs/paulbergson/archive/2014/04/29/can-t-add-the-role-quot-active-directory-domain-services-quot-to-my-2008-r2-server.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Cannot add Active Directory Domain Services role on - DirectoryServices-DomainController . Status: -2147021879 (80070bc9)

Hi everyone,
I've been banging my head against this for a while and hope someone can help me.
Running Windows Server 2008 R2 Standard with Service Pack 1.
When I try to add the Active Directory Domain Services role to the server it gets to about 90% complete and then dies.
The ServerManager.log shows the following information, I have run the System Readiness Tool - output below - with no errors found.
At a loss on what to do next. The only other links I've found suggest rebuilding the server which I would really like to avoid...
Help appreciated,
John
ServerManager.log (extract)
==========
name : Active Directory Domain Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : Active Directory Domain Controller
guest[2] : Identity Management for UNIX
ant. : empty
pred. : empty
provider : null
name : Active Directory Domain Controller
state : Changed
rank : 4
sync tech: CBS
ant. : .NET Framework 3.5.1
pred. : Active Directory Domain Services, .NET Framework 3.5.1
provider : Provider
8720: 2012-01-18 10:54:41.853 [Sync] Calling sync provider of Active Directory Domain Controller ...
8720: 2012-01-18 10:54:41.853 [Provider] Sync:: guest: 'Active Directory Domain Controller', guest deleted?: False
8720: 2012-01-18 10:54:41.853 [Provider] Begin installation of 'Active Directory Domain Controller'...
8720: 2012-01-18 10:54:41.853 [Provider] Install: Guest: 'Active Directory Domain Controller', updateElement: 'DirectoryServices-DomainController'
8720: 2012-01-18 10:54:41.853 [Provider] Installation queued for 'Active Directory Domain Controller'.
8720: 2012-01-18 10:54:41.853 [CBS] installing 'DirectoryServices-DomainController ' ...
8720: 2012-01-18 10:54:42.399 [CBS] ...parents that will be auto-installed: 'NetFx3 '
8720: 2012-01-18 10:54:42.399 [CBS] ...default children to turn-off: 'WCF-HTTP-Activation '
8720: 2012-01-18 10:54:42.415 [CBS] ...current state of 'DirectoryServices-DomainController': p: Staged, a: Staged, s: UninstallRequested
8720: 2012-01-18 10:54:42.415 [CBS] ...setting state of 'DirectoryServices-DomainController' to 'InstallRequested'
8720: 2012-01-18 10:54:42.430 [CBS] ...current state of 'NetFx3': p: Installed, a: Installed, s: InstallRequested
8720: 2012-01-18 10:54:42.430 [CBS] ...skipping 'NetFx3' because it is already in the desired state.
8720: 2012-01-18 10:54:42.430 [CBS] ...current state of default child 'WCF-HTTP-Activation': p: Installed, a: Installed, s: InstallRequested
8720: 2012-01-18 10:54:42.430 [CBS] ...skipped child 'WCF-HTTP-Activation' because it is already installed
8720: 2012-01-18 10:54:42.461 [CBS] ...'DirectoryServices-DomainController' : applicability: Applicable
8720: 2012-01-18 10:54:42.461 [CBS] ...'NetFx3' : applicability: Applicable
8720: 2012-01-18 10:54:42.539 [CbsUIHandler] Initiate:
8720: 2012-01-18 10:54:42.539 [InstallationProgressPage] Installing...
8720: 2012-01-18 10:54:42.758 [InstallationProgressPage] Verifying installation...
8720: 2012-01-18 10:54:42.758 [InstallationProgressPage] Installing...
8720: 2012-01-18 10:55:03.740 [CbsUIHandler] Error: -2147021879 :
8720: 2012-01-18 10:55:03.740 [CbsUIHandler] Terminate:
8720: 2012-01-18 10:55:03.787 [InstallationProgressPage] Verifying installation...
8720: 2012-01-18 10:55:03.802 [CBS] ...done installing 'DirectoryServices-DomainController '. Status: -2147021879 (80070bc9)
8720: 2012-01-18 10:55:03.818 [Provider] Skipped configuration of 'Active Directory Domain Controller' because install operation failed.
8720: 2012-01-18 10:55:03.818 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Active Directory Domain Controller'[STAT] installation(s) took '21.9535541' second(s) total.
[STAT] Configuration(s) took '0.0007754' second(s) total.
[STAT] Total time: '21.9543295' second(s).
8720: 2012-01-18 10:55:03.818 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 110
8720: 2012-01-18 10:55:03.818 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes made
8720: 2012-01-18 10:55:03.818 [InstallationProgressPage] Sync operation completed
8720: 2012-01-18 10:55:03.818 [InstallationProgressPage] Performing post install/uninstall discovery...
8720: 2012-01-18 10:55:03.833 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
8720: 2012-01-18 10:55:03.833 [CBS] IsCacheStillGood: False.
8720: 2012-01-18 10:55:04.333 [CBS] >>>GetUpdateInfo--------------------------------------------------
8720: 2012-01-18 10:55:34.784 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
8720: 2012-01-18 10:55:34.784 [CBS] <<<GetUpdateInfo--------------------------------------------------
8720: 2012-01-18 10:55:34.815 [DISCOVERY] hr: -2147021879 -> reboot required.
8720: 2012-01-18 10:55:34.831 [InstallationProgressPage] About to load finish page...
8720: 2012-01-18 10:55:34.831 [InstallationFinishPage] Loading finish page
8720: 2012-01-18 10:55:34.831 [InstallationFinishPage] Finish page loaded
CheckSUR.log
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 13.0
2012-01-18 10:33
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 220
No errors detected

Hi John,
Thanks for posting.
Performed some research and some results say that this problem can be caused by HD Write Caching.
To disable Write Caching:
1. Go to Device Manager.
2.Click the plus sign (+) next to the Disk Drives branch to expand it.
3.Right-click the drive on which you want to enable or disable disk write caching, and then click Properties.
4.Click the Disk Properties tab.
5.Click to select or clear the Write Cache Enabled check box as appropriate.
6.Click OK.
If no luck, Please check if any erros can be found in Event log, Dcpromoui.Log and Dcpromo.log
The following articles maybe helpful to you:
Known Issues for Installing and Removing AD DS
http://technet.microsoft.com/en-us/library/cc754463(v=WS.10).aspx
You cannot install Active Directory Domain Services
http://support.microsoft.com/kb/975142
Thanks
ZHANG

The Active Directory Domain Services is currently unavailable....printer "unseen"

I Have a Windows 7 on an Acer Aspire 5742 laptop and an HP LaserjetP1102w. There are two wireless laptops in the household. I am trying to print from Microsoft Word Starter, but it states "No Printers Installed" and if I try to add a printer I get the message: The Active Directory Domain Services is currently unavailable.
I can print Self Test/Device configuration sheets (on this the iPv4 reads as 0.0.0.0.), a printer test page and a test print from the HP Print and Scan Doctor. It is the network which is not reading the printer.
I have disabled my firewall, un- and re-installed the printer. I have also tried to uninstall and reinstall the printer using the Window 7 installer utility. but that tells this printer "is not currently supported by this Wizard"
I have searched the web for people with the same problem but found nothing that has helped me. Not to put too fine a point on it I am at my wit's end.
You are my last resort (no pressure, then!)
This question was solved.
View Solution.

Are the configuration reports with the 0.0.0.0 being printed directly from the printer? A 0.0.0.0 address indicates the printer is not actually on the network (or at least not getting DHCP information from the router). The Print and Scan Doctor should not have been able to print to it unless it happened to be connected by a USB cable as well.
What brand and model is the router?
Is the wireless light a solid blue light or a flashing blue light?
You mentioned an Active Directory Domain Services error message. Outside of corporate networks, this is not an error message you should get. I suspect there might be a deeper software issue at fault. Please provide the exact steps you are using to add the printer to generate that error message.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Active Directory Domain Service Unavailable

I've just bought this printer and gone through the installation.. all seemed well.
Network set up also went well and wireless network test results show 'No Problems Found'.
When I click on print icon in Word, Excel etc etc I get the usual print dialogue box. If I just click on PRINT all seems fine, BUT clicking on Properties gets - 'The Active Directory Domain Service is Currently Unavailable'. Click on PROPERTIES and the program 'locks'. If I try to close it I'm told there is a dialogue box open (which there isn't). I have to force a shut down via task manager.
I've tried closing Firewall - no effect.
I've tried USB connection - same problem.
I've run Windows troubleshooter - nothing detected.
Any help please?
N

Hello Nath1310,
Welcome to the HP Forums.
I see that you having some issues with the computer freezing up after attempting to access the printing menu.
Try running the HP Print and Scan Doctor to see if any software or driver issues are causing the freezing. Let me know if you see any error codes or messages.
Write me back when you have time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

SCVMM 2008 R2 - "The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS)."

I know this question has been asked before, but never for R2, that I can tell, and the posted fixes aren't working. I have just installed SCVMM 2008 R2 on a Windows Server 2008 R2 server, using a remote SQL 2008 SP1 database. When I attempt to connect to SCVMM, I get the following error:
"The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS).
Ensure that the SQL Server service is running under a domain account or a computer account that has permission to access AD DS. For more information, see "Some applications and APIs require access to authorization information on account objects" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=121054.
ID: 2607"
What I've seen online is that this is usually becuase the domain account SCVMM is running as does not have the proper permissions on the SQL database. Here's what I've confirmed:
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still "doesn't have access to AD DS," which is obviously untrue)
5) Neither service account is locked out
Has anyone run in to this? It says in Technet that remote SQL 2008 is supported, as long as the SQL management studio is installed to the SCVMM server, and I installed and patched before I began the SCVMM installation. I just don't know what else to try - I have no errors in event logs, no issues during the installation itself...
Andrew Topp

That answer was very unhelpful fr33m4n. The individual mentions that they've received the error that points to the KB article. I currently receive the same error -- there seems to be no resolution. I've run the Microsoft VBS script to add TAUG to the WAAG
as suggested by 331951, and that made absolutely no difference.
1) My SCVMM service account is a local admin on the SCVMM server
2) My SCVMM service account is a dbowner on the SCVMM database in SQL
3) My SQL service account is a dbowner on the SCVMM database in SQL
4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still
"doesn't have access to AD DS," which is obviously untrue)
The user is also a member of WAAG, the machines have delegated authority to each other. Is there any other solution?

Active Directory Domain Services Child Domains

I am using Windows Server 2008 R2 SP1.
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
When I select "Add Roles" I click on "Active Directory Domain Services (Installed)" the "Next>" button is not enabled and can not be selected.
Did I install ADDS wrong?
Is this not how you define Child Domains?
If I use the Command Line or Answer File Methods I get an error message at "ChildName".
Did I forget to install something about enabling Child Domains when installing ADDS?

Hi,
Did you try to create a child domain on the Domain Controller? It seems like that this Server is already a DC, with Active Directory Domain Services installed.
We don’t have to enable anything in the root domain for creating child domains/new trees, we just need to run
Dcpromo or Add Role on another server which is not a DC, and select the existing domain as its parent, then the child domain will be created.
In addition, please make the existing DC as the preferred DNS server on the new server.
I hope this helps.
Amy

How to create two domains name in one active directory domain service .server 2012 ??

Hi there
I want to try sharepoint foundation and office web apps server .
I installed server 2012 sharepoint found 2013 sql server 2012 and create a new forest on active directory domain sevice
now I want to install office web apps server 2013 but when I run the setup said me can't install office web apps server on the domain name that installed sharepoint .
how can I create second domain name on this active directory domain service to install office web apps server ?
help me please I'm new and just want to try sharepoint and office web apps server .
mostly I need to create MS access custom web app and I need the web place to run my access custom web app on this server and because I live in iran can't create and sign up for office 365 and sharepoint online so i'm forced to run them on my system .help
me to complete ths server ?
Greate Regards :
Raha
whit the best regard : Raha

Hi,
For how to Use Office Web Apps with SharePoint 2013, the below links should be what you want to refer to:
Configure Office Web Apps for SharePoint 2013
http://technet.microsoft.com/en-us/library/ff431687.aspx
Video: Configure Office Web Apps for SharePoint 2013
http://technet.microsoft.com/en-us/library/dn455088.aspx
How Office Web Apps work on-premises with SharePoint 2013
http://technet.microsoft.com/en-us/library/ff431685.aspx
In addition, for further assistance for Sharepoint, I suggest you post in the SharePoint forum.
Regards,
Yan Li
Regards, Yan Li

Error 1053 when starting the Routing And Remote Access service

Hi all,
When I tried to start the "Routing And Remote Access" service on Windows 8.1 I got an error message as follow.
Could some one help me please.
Than's.

Hi MRAB,
Please check if all dependences are enabled first.
Then set the start type to Automatic.
Does this issue still occur after a restart?
Alex Zhao
TechNet Community Support

Routing And Remote Access Service: Error 1068: The dependency service or group failed to start

Hi,
I tried to establish a PPP connection between my windows 8.1 PC and another kind of machine using an USB cable. So, as usual on Windows XP and Windows 7,
I configured the COM in the modem list and I tried to start the
"Routing And Remote Access" service and then
I got this message.
So any idea why is failing?
Please help!
Thanks thaks thanks

Hi,
Was your issue resolved?
If no, please reply and tell us the current situation in order to provide further help.
Karen Hu
TechNet Community Support

Windows 2012 routing and remote access service with same subnet

I have internal server IP range -192.168.1.0/24
Windows routing and remote access service with vpn client IP -192.168.11../22
client side IP subnet is -192.168.1.0/24
So we wan routing \ NATING between 192.168.1.0/24 to 192.168.11.0/22 so if vpn user try to ping 192.168.11.5 it should internally forward all request to 192.168.1.5
Don't forget to mark helpful or answer connect me :- http://in.linkedin.com/in/satya11 http://facebook.com/satya.1000

Hi,
According to your description, my understanding is that VPN client and internal network has the same IP range -192.168.1.0/24. And you want to transfer internal network from IP address 192.168.1.0/24 to 192.168.11.0/22.
Agree with Charles David’s point of view. The easiest way to fix routing confusion would be to either change the VPN subnet or the VPN client subnet.
Or, if you configure Windows Server(RRAS) as VPN server, you may enable NAT to transfer internal IP address:
1. Open RRAS, add NAT.
2. New interface to NAT and configure it as public interface.
3. Open Address Pool tab, add IP address range 192.168.11.0/22.
4. Click Reservations, add reserved IP(192.168.11.0/22) and corresponding internal IP(192.168.1.0/24) one by one.
This would be a lot of workload. Besides, you may use 3rd party devices to transfer subnet IP addresses.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Active directory domain services stopped after removing routing and remote access role

Similar Messages

Maybe you are looking for