Active Directory groups not being managed when added to an OD group?

Hi all,
Hopefully someone out there might be able to help with this. I have a magic triangle of authentication working and when I add an AD group to an OD group, some work and some don't.
For example if I add a AD User to an OD group it works. If I add the "Domain Users" AD group to my OD group, it works - everyone on our network is managed (because everyone is in the Domain Users AD group). But if I remove "Domain Users" and add the "Students" AD security group, they are not managed. If I add "Staff' AD group, some staff are managed and some are not (I have confirmed that they are added to the group).
Is there a trick to having AD security groups work in OD groups every time. (Note they are not distribution groups)
Thanks,
Gavin

If the group was added to SharePoint and then users were added to the group try waiting a day.  The claims token in SharePoint lifetime is fairly long.  So when new users are added to an existing AD group SharePoint will not recognize the new membership
in the Claims token for 12 -24 hours.  If you add a user today they should be able to log in tomorrow.  Take a look at the following Blog post.  I think this is your issue.
http://www.andrewjbillings.com/sharepoint-2013-claims-authentication-ad-group-changes-not-reflected/
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

  • "Smart" Groups not being recognized when syncing with iPhone

    I have several "smart" groups in my address book but they don't show up as available to sync with my iPhone. What's up with that?

    Same here. It would be nice to get an answer!

  • Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access

    Event properties – Event 91, Level Error, Event ID 91, Date and time 5/10/2012 11:29:48AM, Service CertificationAuthority
    General: 
    Could not connect to the Active Directory.
    Active Directory Certificate Services will retry when processing requires Active Directory access.
    We have a Windows 2008 Server Enterprise with AD . I would like to enable the service  "Certificate Services"  that
    allow me to enable radius to authenticate users wireless with the active directory.

    Hi, 
    Can you please check this forum or someone from Microsoft, as we have post here dating back from October that are not being answered.
    Everything for us is exactly the same as szucsati and Racom
    NMNM, 
    Please give us an answer on this as the link provided is absolutely useless.
    Thank you.

  • Event ID 31138 "during the active directory update not -uc enabled agents were found"

    Hi All,
    I have Lync standard 2013 server on-premise and Exchange Office 365. I have enabled my users for Voice. 
    When I add a user to a response group I get the warning that the user is not enterprise voice enabled. This is strange as the user is enterprise enabled and can make and receive calls. 
    I also have Event ID 31138 on my Front End server. 
    "during the active directory update not -uc enabled agents were found
    The following agents are specified as agents but are not UC enabled:
    sip:[email protected]"
    Any thoughts? 

    Hi,
    Did you change the default SIP Domain before?
    If yes. You may need to remove agent from database. As the agents of a Response Group are added to the rgsconfigdatabase, within the database you will find a table called dbo.Agents. When open it you will see an overview of theagents which are member
    of the groups. You can do the following steps to remove an agent from this table:
    Right click on the dbo.Agents table and select the option Edit Top 200 rows
    Search for the user and remove the specific record.
    More details:
    http://troubleshootinglync.blogspot.com/2013/05/event-id-31137-unable-to-removeadd.html
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options.

    My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options. Can anyone tell me why?

    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed.

  • Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

    Have an existing ex2010 sp3 organization.
    Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line.  I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
    still get the same error.  The error itself in the log is pretty useless:
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
    [05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
    [05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
    [05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
    [05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
    [05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
    [05/07/2013 01:19:40.0496] [0] Starting file's copying...
    [05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
    [05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
    [05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
    [05/07/2013 01:19:59.0762] [0] File's copying finished.
    [05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
    [05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
    [05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    [05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
    [05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
    [05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
    [05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
    [05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
    [05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
    [05/07/2013 01:20:12.0044] [0] The following roles are installed:
    [05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
    [05/07/2013 01:20:12.0075] [0] Server Name=WEX1
    [05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
    [05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
    [05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
    [05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0841] [0] Applying default role selection state
    [05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
    [05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
    [05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
    [05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
    [05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.  See
    the Exchange setup log for more information on this error.
    [05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:21:04.0154] [0] End of Setup
    [05/07/2013 01:21:04.0154] [0] **********************************************

    Hi,
    The cause is clearly described in the log:
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    I'd suggest you check NIC settings and AD configuration.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites.

    Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites. I am running v 3.6.18

    Websites remembering you and automatically log you in is stored in a cookie.
    * Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    Make sure that you do not run Firefox in Private Browsing mode.
    * https://support.mozilla.com/kb/Private+Browsing
    * In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
    * Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
    Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    * http://kb.mozillazine.org/Cookies

  • ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

    ALL OF MY FILES ARE NOT BEING SAVED WHEN I CLOSE FINAL CUT PRO X ?

    WHAT FILES AREN'T BEING SAVED? WHAT FILES ARE SAVED?

  • Icons for apps are not being displayed when I open the App store, just getting gray color boxes

    Icons for apps are not being displayed when I open the App store, just getting gray color boxes

    Did you update your operating system?  If so, did it solve the problem?  I have not updated my OS because so many people complained that the newer Os's had problems.

  • Reversal documents are not being represented when 0PY_PP_C3 is being loade

    We use the 0HR_PY_PP_2 and 0HR_PY_PP_1 infosources to load the 0PY_PP_C2 and 0PY_PP_C1 ODSs. Then 0PY_PP_C1 updates the 0PY_PP_C3 ODS.
    Routines in the update rules include corresponding data from 0PY_PP_C2 during the update of 0PY_PP_C3. If there is no matching data in 2, then the corresponding records in 1 do not go into 3 Our process chain first loads 2, after it activates, it then loads 1, then updates 3.
    There are 5 reversal documents are in 0PY_PP_C2.
    The Update rules between 0PY_PP_C1 and 0PY_PP_C3 refer to the Posting Documents ODS: 0PY_PP_C2. 
    The issue is that the reversal documents are not being represented when 0PY_PP_C3 is being loaded.

    Hi,
    The simple solution is to debug the code written in the routine, as you mentioned that you already have some data in PP_C2 then check if that data is properly getting read in routine.
    After that check the condition based on which you are skipping records of PP_C1 and not loading into PP_C3. Is your condition perfectly working fine?
    Put a break point and check how the data is flowing.
    Regards,
    Durgesh.

  • Listeners keyDown are not being called when keyDown in an popup l

    For some reason the listeners titleWindow_keyDown are not being called when keyDown in an popup like so:
    <?xml version="1.0" encoding="utf-8"?>
    <s:SkinnablePopUpContainer xmlns:fx="http://ns.adobe.com/mxml/2009"
                               xmlns:s="library://ns.adobe.com/flex/spark"
                               xmlns:mx="library://ns.adobe.com/flex/mx" width="400" height="300"  keyDown="titleWindow_keyDown(event);" >
        <s:TitleWindow title="Edit Complaint" close="close()">
    private function titleWindow_keyDown(evt:KeyboardEvent):void {
                        if (evt.charCode == Keyboard.ESCAPE) {
                            close();
    Any ideas friends??

    But in my code it is a child inside SkinnablePopUpContainer:
    <s:SkinnablePopUpContainer xmlns:fx="http://ns.adobe.com/mxml/2009"
                               xmlns:s="library://ns.adobe.com/flex/spark"
                               xmlns:mx="library://ns.adobe.com/flex/mx" width="400" height="300"  keyDown="titleWindow_keyDown(event);" >
        <s:TitleWindow title="Edit Complaint" close="close()">

  • My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    Must be serious because you have stated the problem 4 times now.
    Here are a number of things that you can try and maybe one of them will help.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
    And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

  • Cookies are not being cleared when I close the browser although the option is set. Any suggestions?

    Under Options; Privacy I have Clear history when Firefox closes ticked and within the Settings for Clearing History I have Cookies ticked. Cookies are not being cleared when I close the browser. Windows 7, SP1 x64

    If clearing the cookies doesn't help then it is possible that the file <i>cookies.sqlite</i> that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete <b>cookies.sqlite-journal</b> and <b>cookies.txt</b>, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
    * http://kb.mozillazine.org/Cookies#Removing_cookies

  • Parent members not being updated when running AGG

    I have a scenario where eventhough the bottom level members change the parent members are not being updated when we run an agg
    For example if the bottom level member was 150 and we run the aggregate the numbers are fine. If the bottom level member was changed to #Missing then the parent members are not updated when we run the agg
    IN the script below we use CALC DIM(COstCenters,SpaceTYpe)
    My concern is the setting SET FRMLBOTTOMUP ON i use, because it looks like it's skipping that block. HOw can work around this issue without affecting the performance too much. For example using SET CREATEONMISSINGBLK ON might help, but will have a performance impact
    Here are the details of the script
    SET MSG SUMMARY;
    SET FRMLBOTTOMUP ON;
    SET CALCPARALLEL 4;
    FIX("Budget","Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS("$1"),@LEVMBRS
    (SpaceType,0),@LEVMBRS(CostCenters,0))
    CALC DIM (ManagedBU,AllocatedBU);
    ENDFIX
    FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",AllocatedBU,ManagedBU,
    @LEVMBRS(SpaceType,0),@LEVMBRS(CostCenters,0))
    "$1";
    ENDFIX
    /* Aggregating numbers for the report so it could be viewed n a top cost center level */
    FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(AllocatedBU),@iDESCENDANTS(ManagedBU),@IDESCENDANTS("$1")
    CALC DIM(COstCenters,SpaceTYpe);
    ENDFIX
    /* Aggregating numbers for the report so it could be viewed in a top regional level*/
    FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(ManagedBU),@IDESCENDANTS(AllocatedBU),@IDESCENDANTS(SpaceType),CostCenters)
    @IANCESTORS("$1");
    ENDFIX

    yes Aggmissg will work with from bottom up. As for performance, believe it or not, having Aggmssg on is quicker that off. That is because when off, it has to look at the children blocks to determine if there are data values present that need to overwrite the parent value where hen it is on, it does not look it just does it.

  • HT201436 I am not being notified when i recieve a voicemail and have contacted my carrier and gone through technical support.

    I am not being notified when i recieve a voicemail and have contacted my carrier and gone through technical support.

    Settings App > Notification Center > Phone > Seelct the alert style you want as well the otehr settings (should be self explanatory).
    Aslo Settings App > Sounds > New Voice Mail.

Maybe you are looking for