Active Directory not binding in AD Plugin
I cannot bind to the Active Directory at work using the ActiveDirectory Plugin for the Directory Access utility.
I keep getting the error message "Invalid Domain"
If I try to ping server.domain.local it does not work. If I try to ping the IP of the server, it works.
The DNS server is Windows Server 2003 based, and has the entire subnet under Reverse Lookup.
I can connect to Samba Shares based on server names, so it knows how to find servers on the network when looking for shares, just not when looking to ping, bind to domain, or browse websites on local servers.
I am able to bind to the LDAP server and browse all the users and computers using LDapper just fine.
In case someone else tries this, this DOES NOT WORK IN LEOPARD!
Leopard added an official Active Directory module that effectively drops any Active Directory support. I have not heard of anyone getting it to work consistently. I was able to check out a kerberos ticket then enable AD authentication, and it worked great, until I turned off the computer and came back the next day and it broke. As soon as the kerberos ticket expires, so does any hope of authenticating against the AD Domain Controller.
Incredibly frustrating.
Similar Messages
-
Active Directory not working Windows Server 2003 R2
Hi,
Like the subject said my root problem is either my Active Directory or DSN server. In order to properly explain the situation I will have to make the full Story. I was contacted by a family member to help
out a Non profit organisation with there server problem. Their current config is Windows Server 2003 R2 Running DC,AD,DNS,DCHP,File Services( i know is not efficient).
Here is how I come in to play, prior of me helping the had another server running same spec started having hardware failure and the invested in a new server. The person that set it up did replicate the server
on the new one as far as AC and Domain controller but nothing else. We ll now the DC01 failed and no user cannot login into a new computer
or if a new employee will try to added the changes don't take effect. Seeing the situation I went for the basic and seize fsmo roles to the new server. Perform Metadata clean up. Configure the DC02 as Master Domain Controller. Now everything
is set up and running but still No new user can be added or any exiting can log in
a different computer. At this point am out of answer I try everything I found in the forum. Am almost to the verge of deleting all and start
from scratch me knowing all config. Sorry for the long story am not good on resuming stuff. Please let me know If I need to add any other detail
I repeat DC01 is DEAD...
Also when a new user try to login or an existing user try to loging they get the system cannot log you on now because the domain is not availableNot Sure if this is the info requested but I ran the commands
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\administrator.LUTHERAN>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : dc02
Primary Dns Suffix . . . . . . . : Lutheran.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Lutheran.local
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #45
Physical Address. . . . . . . . . : 00-1C-23-BF-E6-69
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.6
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DNS Servers . . . . . . . . . . . : 192.168.100.6
Primary WINS Server . . . . . . . : 192.168.100.6
C:\Documents and Settings\administrator.LUTHERAN>
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : WINS Client(TCP/IP) Protocol
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Internet Protocol (TCP/IP)
Bind Name: Tcpip
Binding Paths:
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Internet Protocol (TCP/IP)
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Client for Microsoft Networks
Bind Name: LanmanWorkstation
Binding Paths:
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: Client for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : Client for Microsoft Networks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: Client for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WebClient
Bind Name: WebClient
Binding Paths:
Component Name : DHCP Server
Bind Name: DHCPServer
Binding Paths:
Component Name : Wireless Configuration
Bind Name: wzcsvc
Binding Paths:
Component Name : Network Load Balancing
Bind Name: Wlbs
Binding Paths:
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : Network Load Balancing
Binding Enabled: No
Interfaces of the binding path:
-Interface Name: ndis5
Upper Component: Network Load Balancing
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Component Name : Steelhead
Bind Name: RemoteAccess
Binding Paths:
Component Name : Dial-Up Server
Bind Name: msrassrv
Binding Paths:
Component Name : Remote Access Connection Manager
Bind Name: RasMan
Binding Paths:
Component Name : Dial-Up Client
Bind Name: msrascli
Binding Paths:
Component Name : File and Printer Sharing for Microsoft Networks
Bind Name: LanmanServer
Binding Paths:
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios_smb
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: Message-oriented TCP/IP Protocol (SMB session)
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : File and Printer Sharing for Microsoft Netwo
rks
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: File and Printer Sharing for Microsoft Networks
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : Generic Packet Classifier
Bind Name: Gpc
Binding Paths:
Component Name : Application Layer Gateway
Bind Name: ALG
Binding Paths:
Component Name : NetBIOS Interface
Bind Name: NetBIOS
Binding Paths:
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #45
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndis5
Upper Component: Internet Protocol (TCP/IP)
Lower Component: Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Clien
t) #48
Owner of the binding path : NetBIOS Interface
Binding Enabled: Yes
Interfaces of the binding path:
-Interface Name: netbios
Upper Component: NetBIOS Interface
Lower Component: WINS Client(TCP/IP) Protocol
-Interface Name: tdi
Upper Component: WINS Client(TCP/IP) Protocol
Lower Component: Internet Protocol (TCP/IP)
-Interface Name: ndiswanip
Upper Component: Internet Protocol (TCP/IP)
Lower Component: WAN Miniport (IP)
Component Name : WAN Miniport (IP)
Bind Name: NdisWanIp
Binding Paths:
Component Name : Direct Parallel
Bind Name: {A4DC6983-452B-41F9-B696-5112E5E6F1C6}
Binding Paths:
Component Name : WAN Miniport (PPPOE)
Bind Name: {5B69EEC5-2676-460B-9E03-F38B02BA4474}
Binding Paths:
Component Name : WAN Miniport (PPTP)
Bind Name: {DEE98315-C28A-4CC8-9233-E6C3506C16D3}
Binding Paths:
Component Name : WAN Miniport (L2TP)
Bind Name: {9BFC4E35-93B2-4811-8A56-69149ED0837E}
Binding Paths:
Component Name : RAS Async Adapter
Bind Name: {50239872-7742-4BB5-A28E-0B814085C2A6}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #48
Bind Name: {19218099-5DDC-4936-A111-75E4D7250A24}
Binding Paths:
Component Name : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #45
Bind Name: {52BE526E-7FAE-4458-9691-E333DA333601}
Binding Paths:
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
C:\Documents and Settings\administrator.LUTHERAN> -
Active Directory Not Syncing Correctly in ES2
Hello,
We had our Active Directory 2003 synced up using Adobe Livecycle ES. There would be around 30,000 users that would be synced and this would take around 3 - 4 1/2 minutes to run. This worked perfectly for us for the past half of a year or so.
Last week we upgraded to ES2 and moved all of our processes over. We removed ES and did a fresh install of ES2. Everything seems to be working fine now except the Active Directory isn't syncing properly. When we run the sync, different numbers of users will be fetched. Sometimes it's around three thousand, sometimes seven thousand, sometimes ten thousand, but it never seems to get through them all. In the server log it does say that the directory synchronization completed successfully though even though the number fetched is changing. We made sure the settings are exactly the same as they were before, and we even tried a few different settings, but it still doesn't get all the users. For testing purposes, we tried changing the search filter to pick specific people that aren't showing up during the normal sync and it will show up fine, so I'm wondering if there is something stopping it from going all the way through?
We also have another enterprise domain connected which has around 2,000 users on it and have not had this problem with it.
Here are some of the sync statistics from the past few syncs: (The active directory name has been stripped for security purposes). If you need any more information please feel free to ask. We would like to have this resolved as soon as possible.
2010-05-30 21:02:51,366 INFO [com.adobe.idp.um.businesslogic.synch.DomainSynchronizer]
========== Synch Statistics for ============
Total User Fetched - 5633
Total Group Fetched - 0
Total Members Fetched - 0
Total time taken is 110 sec
[100.00%] [100.00%]Domain Synchronizer(2 runs) : Total 110,375 ms, Max 110359 ms, Min 16 ms, Avg 55187 ms
--[99.99%] [99.99%]User and group phase(1 runs) : Total 110,359 ms, Max 110359 ms, Min 110359 ms, Avg 110359 ms
----[95.78%] [95.80%]Users synch from (6 runs) : Total 105,719 ms, Max 19141 ms, Min 14281 ms, Avg 17619 ms
------[1.18%] [1.23%]Provider (31 runs) : Total 1,298 ms, Max 109 ms, Min 31 ms, Avg 41 ms
--[0.01%] [0.01%]Memberhsip phase(1 runs) : Total 16 ms, Max 16 ms, Min 16 ms, Avg 16 ms
-------Persistence Statistics-------
Users ->
added = 8
removed = 2568
updated = 5625
unchanged = 0
renamed = 0
failed = 0
UniqueId changed = 0
Groups ->
added = 0
removed = 0
updated = 0
unchanged = 0
failed = 0
UniqueId changed = 0
Emails ->
added = 8515
removed = 106
unchanged (In changed Principals) = 16784
Group Members ->
added = 0
removed = 0
unchanged = 0
unknown = 0
failed = 0
-------Batch Statistics-------
Successful User Batches = 113
Failed User Batches = 0
Successful Group Batches = 0
Failed Group Batches = 0
Successful Member Batches = 0
Failed Member Batches = 0
======================================
2010-06-02 21:03:43,692 INFO [com.adobe.idp.um.businesslogic.synch.DomainSynchronizer]
========== Synch Statistics for ============
Total User Fetched - 7140
Total Group Fetched - 0
Total Members Fetched - 0
Total time taken is 165 sec
[100.00%] [100.00%]Domain Synchronizer(2 runs) : Total 164,781 ms, Max 164750 ms, Min 31 ms, Avg 82390 ms
--[99.98%] [99.98%]User and group phase(1 runs) : Total 164,750 ms, Max 164750 ms, Min 164750 ms, Avg 164750 ms
----[96.78%] [96.79%]Users synch from (8 runs) : Total 159,469 ms, Max 26719 ms, Min 3500 ms, Avg 19933 ms
------[1.01%] [1.05%]Provider (42 runs) : Total 1,667 ms, Max 109 ms, Min 15 ms, Avg 39 ms
--[0.02%] [0.02%]Memberhsip phase(1 runs) : Total 31 ms, Max 31 ms, Min 31 ms, Avg 31 ms
-------Persistence Statistics-------
Users ->
added = 8
removed = 5
updated = 7132
unchanged = 0
renamed = 1
failed = 0
UniqueId changed = 0
Groups ->
added = 0
removed = 0
updated = 0
unchanged = 0
failed = 0
UniqueId changed = 0
Emails ->
added = 3340
removed = 105
unchanged (In changed Principals) = 33761
Group Members ->
added = 0
removed = 0
unchanged = 0
unknown = 0
failed = 0
-------Batch Statistics-------
Successful User Batches = 142
Failed User Batches = 1
Successful Group Batches = 0
Failed Group Batches = 0
Successful Member Batches = 0
Failed Member Batches = 0
======================================
2010-06-03 08:56:43,286 INFO [com.adobe.idp.um.businesslogic.synch.DomainSynchronizer]
========== Synch Statistics for ============
Total User Fetched - 2960
Total Group Fetched - 0
Total Members Fetched - 0
Total time taken is 68 sec
[100.00%] [100.00%]Domain Synchronizer(2 runs) : Total 67,984 ms, Max 67921 ms, Min 63 ms, Avg 33992 ms
--[99.91%] [99.91%]User and group phase(1 runs) : Total 67,921 ms, Max 67921 ms, Min 67921 ms, Avg 67921 ms
----[96.37%] [96.46%]Users synch from (3 runs) : Total 65,516 ms, Max 23016 ms, Min 19766 ms, Avg 21838 ms
------[4.00%] [4.15%]Provider (17 runs) : Total 2,719 ms, Max 844 ms, Min 31 ms, Avg 159 ms
--[0.09%] [0.09%]Memberhsip phase(1 runs) : Total 63 ms, Max 63 ms, Min 63 ms, Avg 63 ms
-------Persistence Statistics-------
Users ->
added = 2
removed = 6632
updated = 2958
unchanged = 0
renamed = 0
failed = 0
UniqueId changed = 0
Groups ->
added = 0
removed = 0
updated = 0
unchanged = 0
failed = 0
UniqueId changed = 0
Emails ->
added = 3
removed = 1
unchanged (In changed Principals) = 10035
Group Members ->
added = 0
removed = 0
unchanged = 0
unknown = 0
failed = 0
-------Batch Statistics-------
Successful User Batches = 60
Failed User Batches = 0
Successful Group Batches = 0
Failed Group Batches = 0
Successful Member Batches = 0
Failed Member Batches = 0
======================================We do have quite a few that are missing an attribute, specifically:
2010-06-06 21:05:47,579 WARN [com.adobe.idp.um.businesslogic.synch.LdapHelper] Record [xxxx] is missing required attribute [objectSID] for canonicalName i.e uniqueIdentifier field
This is something that was on our old system as well:
2010-05-25 03:02:35,559 INFO [com.adobe.idp.um.provider.directoryservices.LDAPDirectoryPrincipalProviderImpl] UserM:: [Thread Hashcode: 3010887] This record is missing a required attribute and cannot be used. Specifically CanonicalName is null. Common Name: xxxx
We have many users in our active directory with just email accounts so that users are able to search for a name and find the email address in outlook. I have checked through these and they look fine (though there are fewer entries in ES2 since there are fewer users being fetched).
As for the locked users, here is what we received:
2010-06-06 21:05:47,579 INFO [com.adobe.idp.um.businesslogic.synch.LdapPrincipalProvider] Found [1257] locked users while synching. These users were ignored
This sounds about right for the amount of users that were fetched.
If you have any more questions or ideas, please let us know. We would like to have this resolved as soon as possible. Thanks. -
Active Directory not replicating from SBS 2003 to Server 2008 R2 Standard
I have an old SBS 2003 server and am migrating to a 2008 R2 server. I followed this guide:
http://demazter.wordpress.com/2010/04/29/migrate-small-business-server-2003-to-exchange-2010-and-windows-2008-r2/
I followed the guide (except the exchange stuff, because they are moving from exchange to Google apps for business) and everything went fine.
I removed the sbs from Domain controller status (dcpromo'ed it out) and everything seemed to go fine. I haven't turned off the old server yet, because they are still using it for a couple of other unrelated applications.
After I did this I added new computers to active directory, but they only showed up on the active directory on the old sbs (I think something went wrong when I too the old sbs out of domain controller status).
I ran dcdiag on the new server and this is the result:
Time Generated: 01/10/2014 14:57:56
Event String:
The SiSRaid4 service failed to start due to the following error:
An error event occurred. EventID: 0xC0001B58
Time Generated: 01/10/2014 14:57:56
Event String:
The stexstor service failed to start due to the following error:
An error event occurred. EventID: 0xC0001B58
Time Generated: 01/10/2014 14:57:56
Event String:
The vhdmp service failed to start due to the following error:
An error event occurred. EventID: 0xC0001B58
Time Generated: 01/10/2014 14:57:56
Event String:
The vsmraid service failed to start due to the following error:
A warning event occurred. EventID: 0x8000001D
Time Generated: 01/10/2014 14:58:00
Event String:
The Key Distribution Center (KDC) cannot find a suitable certificate
to use for smart card logons, or the KDC certificate could not be verified. Sma
rt card logon may not function correctly if this problem is not resolved. To cor
rect this problem, either verify the existing KDC certificate using certutil.exe
or enroll for a new KDC certificate.
An error event occurred. EventID: 0x0000164A
Time Generated: 01/10/2014 14:58:20
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL
\sysvol\PIIKANIPW.local\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0xC0001B58
Time Generated: 01/10/2014 14:58:21
Event String:
The Qntm3520 service failed to start due to the following error:
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 14:58:36
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved. This issue may be
transient and could be caused by one or more of the following:
A warning event occurred. EventID: 0x00002724
Time Generated: 01/10/2014 14:58:40
Event String:
This computer has at least one dynamically assigned IPv6 address.For
reliable DHCPv6 server operation, you should use only static IPv6 addresses.
A warning event occurred. EventID: 0x800013B8
Time Generated: 01/10/2014 14:58:49
Event String:
The application '/tmsWebAgent' belonging to site '1' has an invalid
AppPoolId 'Classic .NET AppPool' set. Therefore, the application will be ignore
d.
A warning event occurred. EventID: 0x80003BC4
Time Generated: 01/10/2014 15:01:53
Event String:
SSL Certificate Settings deleted for Port : 0.0.0.0:50106 .
A warning event occurred. EventID: 0x80003BC5
Time Generated: 01/10/2014 15:01:53
Event String:
SSL Certificate Settings created by an admin process for Port : 0.0.
0.0:50106 .
An error event occurred. EventID: 0xC0001B7A
Time Generated: 01/10/2014 15:01:59
Event String:
The TMS Print Agent service terminated unexpectedly. It has done th
is 1 time(s).
A warning event occurred. EventID: 0x0000000C
Time Generated: 01/10/2014 15:02:00
Event String:
Time Provider NtpClient: This machine is configured to use the domai
n hierarchy to determine its time source, but it is the AD PDC emulator for the
domain at the root of the forest, so there is no machine above it in the domain
hierarchy to use as a time source. It is recommended that you either configure a
reliable time service in the root domain, or manually configure the AD PDC to s
ynchronize with an external time source. Otherwise, this machine will function a
s the authoritative time source in the domain hierarchy. If an external time sou
rce is not configured or used for this computer, you may choose to disable the N
tpClient.
An error event occurred. EventID: 0x0000165B
Time Generated: 01/10/2014 15:02:34
Event String:
The session setup from computer 'PK-PC1' failed because the se
curity database does not contain a trust account 'PK-PC1$' referenced by t
he specified computer.
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 15:03:37
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved. This issue may be
transient and could be caused by one or more of the following:
A warning event occurred. EventID: 0x000727AA
Time Generated: 01/10/2014 15:04:01
Event String:
The WinRM service failed to create the following SPNs: WSMAN/PKDC01.
PIIKANIPW.local; WSMAN/PKDC01.
A warning event occurred. EventID: 0x80003BC4
Time Generated: 01/10/2014 15:06:54
Event String:
SSL Certificate Settings deleted for Port : 0.0.0.0:50106 .
A warning event occurred. EventID: 0x80003BC5
Time Generated: 01/10/2014 15:06:54
Event String:
SSL Certificate Settings created by an admin process for Port : 0.0.
0.0:50106 .
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 15:08:37
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved. This issue may be
transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x000016AD
Time Generated: 01/10/2014 15:13:21
Event String:
The session setup from the computer PK-PC1 failed to authentic
ate. The following error occurred:
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 15:13:38
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved. This issue may be
transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 15:18:39
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved. This issue may be
transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 15:20:28
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved. This issue may be
transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000457
Time Generated: 01/10/2014 15:20:33
Event String:
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 15:23:39
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved. This issue may be
transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 15:28:40
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved. This issue may be
transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 15:33:41
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved. This issue may be
transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/10/2014 15:38:41
Event String:
The processing of Group Policy failed. Windows attempted to read the
file \\PIIKANIPW.local\sysvol\PIIKANIPW.local\Policies\{31B2F340-016D-11D2-945F
-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Po
licy settings may not be applied until this event is resolved.
......................... PKDC01 failed test SystemLog
Starting test: VerifyReferences
......................... PKDC01 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : PIIKANIPW
Starting test: CheckSDRefDom
......................... PIIKANIPW passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... PIIKANIPW passed test CrossRefValidation
Running enterprise tests on : PIIKANIPW.local
Starting test: LocatorCheck
......................... PIIKANIPW.local passed test LocatorCheck
Starting test: Intersite
......................... PIIKANIPW.local passed test Intersite
I also noticed that the SYSvol share on the new server is empty and the NETLOGON share doesn't exist.
Please help! Thanks.Hi,
Do you currently have any relevant errors in your System or Application logs?
Seems like the replication is not successfully.
An SBS server shouldn't shut down upon detecting the existence of another DC as that's a fully supported scenario.
Regards.
Vivian Wang -
Bootcamp iMac + Active Directory = Not working!
I have a 2009 iMac with bootcamp and XP pro SP3 running great.
Now have to bind to Active directory box and having issues.
Will bind perfectly but upon restart the login windows stalls on selecting the new domain. the machine then needs to be restarted and same again etc etc.
I have a thinkpad with same install and it works a treat so definitely the iMac thats causing the issue.
Could it be the EFI?
Anyone had similar problems?
Any help would be grand
thanksI have a 2009 iMac with bootcamp and XP pro SP3 running great.
Now have to bind to Active directory box and having issues.
Will bind perfectly but upon restart the login windows stalls on selecting the new domain. the machine then needs to be restarted and same again etc etc.
I have a thinkpad with same install and it works a treat so definitely the iMac thats causing the issue.
Could it be the EFI?
Anyone had similar problems?
Any help would be grand
thanks -
Changes in Active Directory not reflected in SharePoint user info
I have change the manager & name in Active directory but it's not reflecting in sharepoint. I found one command
stsadm -o migrateuser
-oldlogin <domain\name>
-newlogin <domain\name>
[-ignoresidhistory]
But i don't want to do one by one i have many users is there any command for migrate all updated user informationThe migrateuser command is really only when a user's ID changes. Making changes such as name and manager should still be reflected under the original ID. If the changes doesn't propagate, ensure that your User Profile Service Sync completed successfully.
Check for errors and address any you find. A successful sync will propagate the changes properly.
Start here:
http://technet.microsoft.com/en-us/library/ff382639(v=office.15).aspx
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint -
Active Directory not showing up in Shared Service Console
Hi,
I successfully installed EPM Version 11.1.1.1.0 in my PC, can able to access shared services through URL. But I have not seen Active Directory configured, i believe this will taken care automatically during software installation.
I was seeing AD last week, this monday I uninstalled and installed, this time missing AD showing up. I make use of NTLM directory.
Could you please suggest me how to add this AD in shared service console...Its kind of urgent ..please help.
Regards,
UBBut to my surprise, how come I am not able to see this now. I was seeing the AD last week and in fact, i did uninstalls and installs several times, did not face such kind of issues.
Could you please clarify how this has gone from the shared services.
Regards, UB -
Active directory not logging in
We have a mac lab that is logging into active directory. We had all of the logging in with no problems. Now some of the computers will not log in with an a good active directory login. If we unbind and then rebind the computer, it works fine. All macs are running 10.4.5. Any ideas what can be wrong? Thanks.
post your system.log should give you any hint
also check the settings when you can login and compare them when they dont
in tiger, the forest is set to automatically and also you can auhtenticate to cross domains, check uncheck this option to see if it makes any difference -
New Server 2012 install - Active Directory not working properly
We recently converted from 2003 to 2012. Our 2012 R2 server seems to be running fine. We did a DCPROMO on the OLD 2003 DC just fine but now there are all sorts of odd errors (Sharepoint can't authenticate users, Can't run Exchange 2013 on another 2012 server
because it can't find AD, etc.)
on the DC we have a Group Policy error 1096. "Group Policy Object LDAP://CN=User,cn={2B476B3E-2749-4B1B-8EC1-F5672A66F94F},cn=policies,cn=system,DC=mydom,DC=local\\mydom.local\SysVol\mydom.local\Policies\{2B476B3E-2749-4B1B-8EC1-F5672A66F94F}\User\registry.pol"
So far I haven't found anything on how to fix this (and the AD itself.) There are some errors in the DCDIAG log, too:
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\ISD-DC1\netlogon)
[ISD-DC1] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
Any suggestions how we can fix these errors are greatly appreciated!Hi,
Did you migrate the Active Directory from Windows server 2003 to Windows server 2012?
Please refer to this article:
https://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Regards.
Vivian Wang -
Active Directory Not Replicating
Hey Guys,
I have a Windows 2012 server but it has a demo license, this is also my DC. I am trying to create another DC and let it replicate so I can license the new properly and stuff. I have the DNS of each server pointing to each other as the primary and themselves
as the alternative. When I check my SYSVOL folder and go to domains, its empty, as I shutdown my original DC the other one the entries disappear and I get errors. When I go to the event log on my new DC I get errors with event IDs 1202 and 2213. Any assistance
with this issue i'm having will be greatly appreciated, thanks!
Regards,
Jevon.Please follow this , it should help expecially this section:
For environments that have two domain controllers
Determine whether a dirty shutdown was detected (event ID 2213) on either domain controller. You may find the second domain controller
is waiting to complete initialization of SYSVOL, This is because after promotion, it will have logged a 4614 event that indicates that DFS Replication is waiting to perform initial replication, and it will not have logged a 4604 event signaling that
DFS Replication has initialized SYSVOL.
If content freshness is enabled on both domain controllers
If the second domain controller is waiting to perform initial synchronization (event 4614 logged without the 4604 anti-event), follow
the section of article 2218556 to
set the first domain controller as authoritative. You do not have to configure the second domain controller as nonauthoritative, because it is already waiting to perform initial synchronization.
Or, if the second domain controller is healthy and SYSVOL is shared, perform the following steps:
Back up all SYSVOL contents of the first domain controller.
Evaluate if the second domain controller's SYSVOL data is up to date. If it is not, you may want to copy updated SYSVOL files to the second domain controller from the first domain controller. Otherwise, any existing data
present on first domain controller not present on the second will go into the 'PreExisting' and 'Conflict and Deleted' folders.
Set the first domain controller as nonauthoritative by disabling the membership per 2218556.
Confirm that an event ID 4114 is logged to indicate the membership is disabled.
Enable the first domain controller's membership, and wait for the 4614 and 4604 events that report completion of the initial synchronization. If it is necessary, restore any updated files from "PreExisting" to the
original location.
If content freshness is not enabled or triggered on both domain controllers
If the first domain controller is in the event ID 2213 state and the second domain controller has never completed initialization
after it was promoted and content freshness has not been triggered, perform the following steps:
Run the ResumeReplication WMI method on the first domain controller as instructed in the 2213 event.
After replication resumes, it will log an event ID 4602 that indicates that DFS Replication initialized the SYSVOL replicated folder and designated it as the primary member.
Run the dfsrdiag pollad command on the second domain controller to trigger it to complete initial sync (event ID 4614). As soon as initial sync is finished, event ID 4604 is logged, signaling SYSVOL
has completed initialization.
Or, if the first domain controller is in the 2213 state and the second domain controller is healthy (SYSVOL is shared), run theResumeReplication WMI
method on the first domain controller. It will log event ID 2214 at the completion of dirty shutdown recovery.
This post is provided AS IS with no warranties or guarantees, and confers no rights.
~~~
Questo post non fornisce garanzie e non conferisce diritti -
Snow Leopard and Windows 2003 Active Directory Binding Issues
Ok I have a new imac 27" with snow leopard (completely patched).
I am attempting to join it to an active directory domain.
First the prequel:
* I have opened full traffic to and from the machine and our domain controllers
* I have enabled full logging on the firewall and there are no blocked packets
* I have used wireshark to watch the traffic on the mac and there appear to be no anomalies (packets being sent out but not getting a response, dns requests that aren't answered, etc)
* I have enabled full KDC logging on the domain controller in question and there are no errors in any of the event logs on either domain controller.
* The domain admin account in question has Enterprise, Schema and Domain Admin rights
* I have tried it both with and without an existing computer account and with every conceivable combination of caps and no caps on domain name, user and computer names.
I am getting the following error at the very end of the process:
"Unable to add server. Credential operation failed because an invalid parameter was provided (5102)"
I enabled debugging on Directory Services and will post a log in a reply.
Anyone have any ideas? I have been banging my head on this for a week with no luck.Here is the log with the Active Directory: entries grepped... the full log is far too large to reply to here, if you think you need it let me know and I can email it to you it is 548kb
obviously machine names, usernames and ip addresses have been munged.
2011-02-09 12:13:32 EST - T\[0x0000000100404000\] - Active Directory: copyNodeInfo called for /Active Directory
2011-02-09 12:13:36 EST - T\[0x0000000100404000\] - Active Directory: copyNodeInfo called for /Active Directory
2011-02-09 12:13:41 EST - T\[0x0000000100404000\] - Active Directory: copyNodeInfo called for /Active Directory
2011-02-09 12:13:46 EST - T\[0x0000000100404000\] - Active Directory: copyNodeInfo called for /Active Directory
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Bind Step 1 - Searching for Forest/Domain information
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: subdomain.domain.tld - Start checking servers for site "any"
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Total Servers "any" LDAP - 2, Kerberos - 2, kPasswd - 2
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Adding Server - "dc3.subdomain.domain.tld"
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Adding Server - "dc1.subdomain.domain.tld"
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: subdomain.domain.tld - Finished checking servers for domain
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: DomainConfiguration reachabilityNotification - Node: subdomain.domain.tld - resolves - enabled
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Bind Step 2 - Finding nearest Domain controllers
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Bind Step 3 - Verifying credentials
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: subdomain.domain.tld - Start checking servers for site "any"
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Total Servers "any" LDAP - 2, Kerberos - 2, kPasswd - 2
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Adding Server - "dc3.subdomain.domain.tld"
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Adding Server - "dc1.subdomain.domain.tld"
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: subdomain.domain.tld - Finished checking servers for domain
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: DomainConfiguration reachabilityNotification - Node: subdomain.domain.tld - resolves - enabled
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: EstablishConnectionUsingReplica - Node subdomain.domain.tld - New connection requested
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: FindSuitableReplica - Node subdomain.domain.tld - Attempting Replica connect to dc3.subdomain.domain.tld.
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: watchReachability watching socket = 21, xxx.xxx.164.71 -> xxx.xxx.174.77
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: VerifiedServerConnection - Verified server connectivity - dc3.subdomain.domain.tld.
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: CheckWithSelect - good socket to host dc3.subdomain.domain.tld. from poll and verified LDAP
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: FindSuitableReplica - Node subdomain.domain.tld - Established connection to dc3.subdomain.domain.tld.
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: kadmEntry port is nil, will use default 464
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: populateKerberosToDomain - Bailing no domain cache for
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Password verify for [email protected] succeeded - cache MEMORY:vyvyIt4
2011-02-09 12:13:47 EST - T\[0x0000000102481000\] - Active Directory: Switching active cache to MEMORY:vyvyIt4
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Secure BIND Session Success with server dc3.subdomain.domain.tld.:389 using cache MEMORY:vyvyIt4 user [email protected]
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Processing Site Search with found IP
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: No site name available
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: subdomain.domain.tld - Start checking servers for site "any"
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Total Servers "any" LDAP - 2, Kerberos - 2, kPasswd - 2
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Adding Server - "dc3.subdomain.domain.tld"
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Adding Server - "dc1.subdomain.domain.tld"
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: subdomain.domain.tld - Finished checking servers for domain
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Updating Mappings from inSchema.........
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Updated schema for node name subdomain.domain.tld
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Configuration naming context = cn=Partitions,CN=Configuration,DC=subdomain,DC=domain,DC=tld
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Top domain set as <cn=subdomain,cn=partitions,cn=configuration,dc=subdomain,dc=domain,dc=tld>
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Updating domain hierarchy cache
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Updating policies from domain subdomain.domain.tld
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Updated policies for node name subdomain.domain.tld
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: Bind Step 4 - Searching for existing computer
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: EstablishConnectionUsingReplica - Node subdomain.domain.tld - New connection requested
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: watchReachability watching socket = 18, xxx.xxx.164.71 -> xxx.xxx.174.77
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: VerifiedServerConnection - Verified server connectivity - dc3.subdomain.domain.tld.
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: establishConnectionUsingReplica - Node subdomain.domain.tld - Previous replica = dc3.subdomain.domain.tld. responded
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: kadmEntry port is nil, will use default 464
2011-02-09 12:13:48 EST - T\[0x0000000102481000\] - Active Directory: populateKerberosToDomain - Bailing no domain cache for
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Password verify for [email protected] succeeded - cache MEMORY:zXpbfEi
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Switching active cache to MEMORY:zXpbfEi
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Secure BIND Session Success with server dc3.subdomain.domain.tld.:389 using cache MEMORY:zXpbfEi user [email protected]
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Doing Computer search for Ethernet address - 10:9a:dd:56:1b:1d
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Bind Step 4 - no mapping for Ethernet MAC address
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Doing DN search for account - machinename
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: stopWatching socket = 21, xxx.xxx.164.71 -> xxx.xxx.174.77
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: LDAP connection closed - dc3.subdomain.domain.tld.:389 - cache MEMORY:vyvyIt4 user [email protected]
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Destroying cache name MEMORY:vyvyIt4 user [email protected]
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Closing All Connections
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: stopWatching socket = 18, xxx.xxx.164.71 -> xxx.xxx.174.77
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: LDAP connection closed - dc3.subdomain.domain.tld.:389 - cache MEMORY:zXpbfEi user [email protected]
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Destroying cache name MEMORY:zXpbfEi user [email protected]
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Bind Step 5 - Bind/Join computer to domain
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: EstablishConnectionUsingReplica - Node subdomain.domain.tld - New connection requested
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: watchReachability watching socket = 18, xxx.xxx.164.71 -> xxx.xxx.174.77
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: VerifiedServerConnection - Verified server connectivity - dc3.subdomain.domain.tld.
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: establishConnectionUsingReplica - Node subdomain.domain.tld - Previous replica = dc3.subdomain.domain.tld. responded
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: kadmEntry port is nil, will use default 464
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: populateKerberosToDomain - Bailing no domain cache for
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Password verify for [email protected] succeeded - cache MEMORY:10xG6op
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Switching active cache to MEMORY:10xG6op
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Secure BIND Session Success with server dc3.subdomain.domain.tld.:389 using cache MEMORY:10xG6op user [email protected]
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Looking for existing Record of machinename
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Doing DN search for account - machinename
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: EstablishConnectionUsingReplica - Node subdomain.domain.tld - New connection requested
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: watchReachability watching socket = 21, xxx.xxx.164.71 -> xxx.xxx.174.77
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: VerifiedServerConnection - Verified server connectivity - dc3.subdomain.domain.tld.
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: establishConnectionUsingReplica - Node subdomain.domain.tld - Previous replica = dc3.subdomain.domain.tld. responded
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: kadmEntry port is nil, will use default 464
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: populateKerberosToDomain - Bailing no domain cache for
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Switching active cache to MEMORY:10xG6op
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Secure BIND Session Success with server dc3.subdomain.domain.tld.:389 using cache MEMORY:10xG6op user [email protected]
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: KerberosID Found for account CN=MACHINENAME,CN=Computers,DC=subdomain,DC=domain,DC=tld - MACHINENAME$
2011-02-09 12:13:49 EST - T\[0x0000000102481000\] - Active Directory: Existing record found @ CN=MACHINENAME,CN=Computers,DC=subdomain,DC=domain,DC=tld with [email protected].
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: Setting Computer Password FAILED for existing record......
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: Computer password change date is 2011-02-04 18:21:01 -0500
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: Schtldled computer password change every 1209600 seconds - starting 2011-02-09 12:13:50 -0500
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: Closing All Connections
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: stopWatching socket = 21, xxx.xxx.164.71 -> xxx.xxx.174.77
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: LDAP connection closed - dc3.subdomain.domain.tld.:389 - cache MEMORY:10xG6op user [email protected]
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: stopWatching socket = 18, xxx.xxx.164.71 -> xxx.xxx.174.77
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: LDAP connection closed - dc3.subdomain.domain.tld.:389 - cache MEMORY:10xG6op user [email protected]
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: Destroying cache name MEMORY:10xG6op user [email protected]
2011-02-09 12:13:50 EST - T\[0x00000001026AA000\] - Active Directory: Failed to changed computer password in Active Directory domain
2011-02-09 12:13:50 EST - T\[0x0000000102481000\] - Active Directory: copyNodeInfo called for /Active Directory
2011-02-09 12:13:51 EST - T\[0x0000000102481000\] - Active Directory: copyNodeInfo called for /Active Directory
Message was edited by: aelana -
'Public' Active Directory account no longer works w/Tiger?
We have approx 20 public Macs that all log onto our Windows 2003 server using the same Active Directory account - 'Public'
This has worked fine until Tiger - Now when we attempt to log onto one of our network drives with this account name I'm told by a pop-up window that the account is either disabled or I've put the password in incorrectly.
Can anyone confirm if 'Public' cannot be used by a user on Tiger? Is it exclusively for the OS?Ran accross this in help file...
"Mac OS X 10.3 or later: "Invalid user name and password combination" Message When Using Active Directory
When binding a Mac OS X client computer to Active Directory, the account entered is not validated (resolved) at that time. It is used as entered. If entered incorrectly, you will see an alert message later.
Symptom
After configuring the Active Directory Directory Access plug-in, an alert message appears at the client computer that says "invalid user name and password combination."
Products affected
Mac OS X 10.3 or later
Solution
This happens when an incorrect name and/or password is entered, including a username entered with incorrect syntax.
The user's login name (also known as "PrincipalName") is required when binding a computer to Active Directory.
The user can also use the short part of the login name (such as "virginia"). The typical syntax of a login name is similar to "[email protected]".
Note: If the user's login name has been modified from the default "[email protected]", then the default login name must be used. The modified login name (such as "[email protected]") cannot be used." -
Cisco Prime Infrastructure 1.2 synchronizaton with active directory
hi all
I have installed Cisco Prime Infrastructure 1.2 and I want to make a synchronization between the PI and the active directory
note:
I want to make that to be able to search about the users on cisco prime infrastructure using Hostname instead of serching on it using IP or MAC address.
how can I do this task ???
thanks all.
I appreciate your support.Hi Mohamed,
Integration with AD is not supported in PI
Thanks-
Afroz
[Do rate the useful post] -
Fix: Active directory corrupted (NTDS ISAM Database Corruption errors in eventlog)
It worked for me!
Frank Keunen
IT-Pro Evangelist :: Microsoft IT Infrastructure Engineer
Follow the procedure below to fix Microsoft Active Directory database problems (corrupted Active Directory due to e.g memory issues/disk problems):
1. Reboot the server and press F8. Choose Directory Services Restore Mode from the Menu.
2. Check the physical location of the Winnt\NTDS\ folder.
3. Check the permissions on the \Winnt\NTDS folder. The default permissions are: Administrators – Full Control System – Full Control
4. Check the Winnt\Sysvol\Sysvol folder to make sure it is shared.
5. Check the permissions on the Winnt\Sysvol\Sysvol share. The default permissions are: Share Permissions: —————— Administrators – Full Control Authenticated Users – Full Control Everyone – Read NTFS Permissions: —————– Administrators – Full Control Authenticated
Users – Read & Execute, List Folder Contents, Read Creator Owner – none Server Operators – Read & Execute, List Folder Contents, Read System – Full Control Note: You may not be able to change the permissions on these folders if the Active Directory
database is unavailable because it is damaged, however it is best to know if the permissions are set correctly before you start the recovery process, as it may not be the database that is the problem.
6. Make sure there is a folder in the Sysvol share labeled with the correct name for their domain.
7. Open a command prompt and run NTDSUTIL to verify the paths for the NTDS.dit file. These should match the physical structure from Step 2. To check the file paths type the following commands: Start a command prompt NTDSUTIL Files Info The output should
look similar to: Drive Information: C:\ NTFS (Fixed Drive) free (2.9 Gb) total (3.9 Gb) D:\ NTFS (Fixed Drive) free (3.6 Gb) total (3.9 Gb) DS Path Information: Database : C:\WINNT\NTDS\ntds.dit – 10.1 Mb Backup dir: C:\WINNT\NTDS\dsadata.bak Working dir:
C:\WINNT\NTDS Log dir : C:\WINNT\NTDS – 30.0 Mb total res2.log – 10.0 Mb res1.log – 10.0 Mb edb.log – 10.0 Mb This information is pulled directly from the registry and mismatched paths will cause Active Directory not to start. Type Quit to end the NTDSUTIL
session.
8. Rename the edb.chk file and try to boot to Normal mode. If that fails, proceed with the next steps.
9. Reboot into Directory Services Restore mode again. At the command prompt, use the ESENTUTL to check the integrity of the database. NOTE: You can use NTDSUTIL to check the Integrity, however esentutl is usually more reliable. Type the following command:
ESENTUTL /g “\NTDS.dit” /!10240 /8 /v /x /o (Note: Type the path without the quotes). Note: The default path would be C:\Winnt\NTDS\ntds.dit; however it may be different in some cases. The output will tell you if the database is inconsistent and may produce
a jet_error 1206 stating that the database is corrupt. If the database is inconsistent or corrupt it will need to be recovered or repaired . To recover the database type the following at the command prompt: NTDSUTIL Files Recover If this fails with an error,
type quit until back at the command prompt and repair the database using ESENTUTL by typing the following: ESENTUTL /p “\NTDS.dit” /!10240 /8 /v /x /o (Note: Type the path without the quotes). Note: If you do not put the switches at the end of the command
you will most likely get a Jet_error 1213 “Page size mismatch” error.
10. Delete the log files in the NTDS directory, but do not delete or move the ntds.dit file.
11. The NTDSUTIL tool needs to be run again to check the Integrity of the database and to perform a Semantic Database analysis. To check the integrity, at the command prompt type: NTDSUTIL Files Integrity The output should tell you that the integrity check
completed successfully and prompt that you should perform a Semantic Database Analysis. Type quit. To perform the Semantic Database Analysis type the following at the NTDSUTIL Prompt type: Semantic Database Analysis Go The output will tell you that the Analysis
completed successfully. Type quit and closes the command prompt. NOTE: If you get errors running the Analysis then type the following at the semantic checker prompt: semantic checker: go fix This puts the checker in Fixup mode, which should fix whatever errors
there were.
12. Reboot the server to Normal Mode. If any of these steps fail to recover the database the only alternative is to perform an Authoritative System State restore from backup in Directory Services Restore mode. For more information, please refer to the following
articles: 315136 HOW TO: Complete a Semantic Database Analysis for the Active Directory http://support.microsoft.com/?id=315136 265706 DCDiag and NetDiag in Windows 2000 Facilitate Domain Join and DC Creation http://support.microsoft.com/?id=265706 258007
Error Message: Lsass.exe – System Error : Security Accounts Manager http://support.microsoft.com/?id=258007 265089 Event 1168: Windows 2000 DCs Unable to Boot into Active Directory http://support.microsoft.com/?id=265089 315131 HOW TO: Use Ntdsutil to Manage
Active Directory Files from the Command http://support.microsoft.com/?id=315131 BR – FrankFrank: This procedure (with some variations required for my environment) worked
perfectly. Thank you very much.
To other readers: The procedure works, but it is a loaded gun. Be careful and methodical.
The specifics of my situation, which I offer as additional information, are:
Windows Server 2003 R2 Standard Edition SP2 with all updates.
One server, 20 clients; of course the server is the domain controller.
I suggest running the command prompt window at an elevated security level ("run as:", followed by unchecking the "restricted" box).
I also suggest changing directories to C:\WINNT\NTDS or C:\WINDOWS\NTDS, as appropriate.
Variations:
The location of the NTDS folder is C:\WINDOWS\NTDS for an install that is not an upgrade from Server 2000.
Step 9 -- the parameters for ESENTUTL are different. For the integrity check I used "ESENTUTL /g NTDS.DIT /8" as the other parameters are not available.
Also in step 9 -- For the repair step that was required I used "ESENTUTL /p NTDS.DIT /8". There was a window warning of a possible data loss, which clicking OK cleared.
Step 11 -- NTDSUTIL FILES INTEGRITY works properly without change. However, the Semantic Database Analysis check cannot be run in a single command. I used "NTDSUTIL SEMANTIC DATABASE ANALYSIS" followed by "GO" at the next prompt. The database analysis does
not report a positive result, but if there is no warning the database passes the analysis. To be certain I ran the "GO FIX" step anyway, which gave identical output.
After this procedure the system started perfectly. I recommend this procedure as the answer to the problem.
-- E. R. Quinones -
Active Directory binding not working
Hi
I'm trying to bind to my active directory at work.
On tiger I used the following settings
serverdomain.ad
the servers name is machine
Which worked fine.
On leopard when I use either serverdomain.ad or machine.serverdomain.ad I get the following error message
(loosely translated from swedish)
An unknown combination of domain and treecollection was used. You should use a complete DNS-name for the domain and tree collection (i.e something.company.se)
Does anyone know what I should use..the FQDN is machine.serverdomain.ad - shouldnt that work?The answer was dns.. my client was using the correct nameserver.
The binding worked after that..although I'm not sure its autenticating as it should
Maybe you are looking for
-
Mac OS 10.8.2 (Mountain Lion) Set Up Issues
Downloaded and Installed CS6 onto my Mac (OSX 10.8.2) but a few errors have made it unusable. Each time I open any of the CS6 applications, a blank Adobe Service License Agreement now appears. Apparently, I need to agree to move forward; however,
-
Show no video but has sound what do I need to do to fix this?
-
Please suggest a select query / sub query with out using any subprograms or
source table: Three columns ORIGIN, DESTINATION,MILES Origin Destination Miles Sydney Melbourne 1000 Perth Adelaide 3000 Canberra Melbounre 700 Melbourne Sydney 1000 Brisbane Sydney 100
-
<div class="content"> <div> (css attribute float : left) <img> </div> <div> (css attribute float : left) <table> (I need this table to align vertically with the image.) (vertical-align : middle doesn't seen to do any
-
Why do u use JAVA ? :-)
Hello All, Please tell me your reasons of using Java if you know in advance that your application will run under specific OS. Thanks