Active Directory Sites + Boundary Groups + Database not showing correctly?
I am having a hard time trying to track down my issue but after digging for a bit, I think I have figured it out but I am unsure how to fix it.
Quick backstory, we had a domain controller go bad in this ADsite, the domain controller was also a DP at the time aswell and to fix our issues we dcpromo /forceremove it and cleaned up AD after. Created a new domain controller in
the ADsite, replicated everything across, everything is going as it should. SCCM on the other hand thinks I did something very wrong.
I'm not sure even how to explain but here goes. SCCM Console shows that the newly created distribution point that is running in the site where I ripped out the old domain controller and it is running well, the boundary is there, the DP is
tied to the boundary is it looks great. (
https://onedrive.live.com/redir?resid=B5BA8EC0E0DB675!4966&authkey=!ACD-aPFR5oE6TtI&v=3&ithint=photo%2cpng )
On the other hand, SCCM Database is not connecting the DP to the boundary. I am clueless on why this is happening. Because of this, it seems like no end users are getting any software. LocationServices on client machines show the computers are in the
proper site but SCCM does not seem to think the new DP is part of the site. (
https://onedrive.live.com/redir?resid=B5BA8EC0E0DB675!4967&authkey=!AEhKiU6eRr6kph0&v=3&ithint=photo%2cpng )
The other 9 DPs have no issues, they are part of their respected sites, clients are getting all the software from the proper DPs and no issues.
I would gladly share some log files if they are of any value to anyone. I have looked through ads*.log and have not found anything that would tell me it has issues querying the ADsite.
Any help would be greatly appreciated!
Removal of the DC should be unrelated as they is no direct communication. Deleting the boundary/group and re-add them.
Torsten Meringer | http://www.mssccmfaq.de
Similar Messages
-
The web site of Adobe does not show correctly in FireFox
I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris -
User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013
I can login with the these AD users and AD direct import is working just fine. We are not using UPS.
With admin user when I click on the user it shows up proper data. But when I login with the same user it does not show me userdisplay/useredit and shows blank data. Also another strange thing is when I add new item in list with these AD users created by
modified by is blank and its really strange. I checked user information list, tried to rerun user sync with direct AD import option but no success.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint LeadHi Amit,
According to your description, my understanding is that the page is blank when the use accessed /_layouts/15/userdisp.aspx and the created by field was blank when the user created a new list item in SharePoint 2013.
I tested the same scenario per your post, however I cannot reproduce your issue.
For troubleshooting this issue, I recommend to verify the things below:
Check the permission of the user in the corresponding site collection to see if he can access /_layouts/15/userdisp.aspx.
Delete the user from AD and SharePoint, then re-add the user to AD and grant proper permission to the user in SharePoint to see if the issue still occurs.
Did this issue occur with all the users? Add a new user in AD and test the same scenario.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
I have a two site DAG, and the command is running from the alternate site where the databases are not currently being hosted. The following command...
Test-OutlookConnectivity -Protocol:TCP -TrustAnySSLCert:$true -MonitoringContext:$true
...errors with the following output:
An error occurred while trying to access mailbox CurrentlyHostingMBServerName.InternalDomainName, on behalf of user InternalDomainName\extest_bb13200232474
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
es..
+ CategoryInfo : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
OutlookConnectivity], CasHealthStorageErrorException
+ FullyQualifiedErrorId : F2F8AC0D,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
I thought this command would work based on the 'AllowCrossSiteRpcClientAccess: True' option on the DAG. The command works well if run a CAS server in the active DB site.Hi,
Exchange 2013 users use Outlook Anywhere to connect to CAS server. You may run the RCA to test the connectivity:
https://www.testexchangeconnectivity.com/
Thanks,
Simon Wu
TechNet Community Support -
SCCM 2012-Active Directory Site
Hello All,
I was create the collection by name of IN-ACTIVE for India location but in that collection USA systems also falling then when I was check those all USA machines the Active Directory site name showing different OU name
Here my Goal is :
Why other Country machines reporting to this collection and AD site name also showing another not USA OU ?
Anyone can help me
Best Regard's Krishnaif you are sure that,US computers are not in India location OU ,you may check by picking up one US computer(that you feel,it is part of India OU Collection ),properties ,and look for its OU details.
Can you post your WQL Query ?
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr -
The user and the mailbox are in different Active Directory Sites
Hi All,
I have 2 site, each site have an Exchange Server 2010 SP1, let say Site HQ and Site DRC I monitored it with SCOM 2007 R2, site HQ successfully monitored, then I continue try to monitor DRC site. I executed new-TestCasConnectivityUser.ps1 at MBX DRC Site
to create extest user.
Then I try to execute command to test-connectivity, but it failed.
Test-OwaConnectivity -TestType:Internal -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true | fl
RunspaceId : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
AuthenticationMethod :
MailboxServer : CONMBX02.contoso.com
LocalSite : CONMBX02.contoso.com
SecureAccess : False
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : DRCCAS01
LocalSiteShortName : CONMBX02
ClientAccessServer : DRCCAS01.contoso.com
Scenario : Reset Credentials
ScenarioDescription : Reset automated credentials for the Client Access Probing Task user on Mailbox server CON
MBX02.contoso.com.
PerformanceCounterName :
Result : Failure
Error : [Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while t
rying to access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extes
t_xxxxxxxx
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in
different Active Directory sites..
UserName : extest_xxxxxxxx
StartTime : 04/01/2012 20:46:19
LaCONcy : 00:00:00.0156460
EventType : Error
LaCONcyInMillisecondsString :
Identity :
IsValid : True
WARNING: No Client Access servers were tested.
RunspaceId : 6b709fa5-0719-4be5-ae62-ec4b3617a6e0
Events : {Source: MSExchange Monitoring OWAConnectivity Internal
Id: 1005
Type: Error
Message: Couldn't access one or more test mailboxes.
The service that is being tested will not run against these mailboxes.
Detailed information:
Local Site:DRCProduction
[Microsoft.Exchange.Monitoring.CasHealthStorageErrorException]: An error occurred while trying to
access mailbox CONMBX02.contoso.com, on behalf of user contoso.com\extest_xxxxxxxx
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in differen
t Active Directory sites..
PerformanceCounters : {Object: MSExchange Monitoring OWAConnectivity Internal
Counter: Logon LaCONcy
Instance: DRCCAS01.contoso.com|DRCProduction
Value: -1000}
any help appreciate it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs:
Krisna Ismayanto | Twitter: @ikrisnaHi
Removed existing test account on two site.
Then created test account on DGC through new-TestCasConnectivityUser.ps1.
Flushed Health Service on RMS.
Terence Yu
TechNet Community Support
Hi
What do you mean on DGC ? you mean I have remove both test account or just at DRC site only ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs:
Krisna Ismayanto | Twitter: @ikrisna -
Route mail and Active Directory Sites and Services configuration
Folks,
I have a problem in the internal email routing. My network is spread across various regions and the branch offices are connected together in a mpls network (full mesh). Every region has its own Exchange Server with all roles installed and the smtp connection
to the outside world is linked to two Exchange servers in the headquarter server farm.
The problem is that internally I often see emails going across the Exchange Servers in the branch offices where there is low bandwidth (from 3 to 5 Mbps), thus email are sent first to these servers instead of going immediately to the Exchange hosting
the mailboxes of the intended recipients. This happens also with inbound emails.
This causes slowness in the email system and sometimes also the network with these branch offices suffers from packet loss or very high latency.
I know that Exchange is a site-aware application and uses the Active Directory topology for message routing and to communicate with the services that are running on other Exchange 2013 computers. For this reason I have checked the Active Directory Sites
and Services and surprisingly I have found that there are no sites, no subnets, nothing has been defined but the default settings, included the Inter-Sites transport which contains the default DEFAULTIPSITELINK.
Apart from the fact that clients use logon servers which are not supposed to use in the far remote offices, I am concerned of changing the Exchange Infrastructure whilst the email system is running and I would like to ask your opinion about my next steps:
1) Create subnets for every office
2) Create sites and then link them to the subnets done in point 1
3) Delete the DEFAULTIPSITELINK and create new site links based on the costs (network speed) in order to determine the best routing server. I have 5 remote offices with 5 different network bandwidth, so I'll have to create 5 IP site links: high cost for
link with slow network, low cost for fast network.
4) (Optional) Configure the Exchange-specific cost using the Set-AdSiteLink cmdlet to the AD IP site links created previously
Apart from the valid questions on why the previous Exchange Administrator have forgotten to set up the Active Directory (Topology) Sites and Services...
...And why have chosen to install all Exchange Roles to each server when there was no reason to do that (there are two servers connected to the external smtp gateways in the headquarter, so in my opinion the Exchange Servers in the remote branch offices
should have had only the mailbox and the cas role)...
As a matter of fact, my idea is to go further and create the sites,subnets and the ip site link. If I still notice a wrong email flow, I can configure an ad-hoc Exchange-specific cost using the Set-AdSiteLink cmdlet. Does this sound reasonable to you guys
or I am taking the wrong decisions?
ThanksThank you very much for your link. This is exactly the page I have read just before posting my question here. It is not easy for me to understand why this has been setup this way by a Microsoft certified engineer.
There are specific rules to follow when Active Directory and Exchange are located in multiple sites and I am not a skilled Exchange Administrator... he keeps saying that it is correct and also tells that if I go forward with my ideas there is the
risk to increase the level of complexity. I prefer more complexity than default setting, and as a consequence of that, connectivity problems!
Hopefully everything goes well. I will post my results here once I have done the changes
Regards -
Hi,
We are starting our monthly patching and have a situation with SQL2012 SP2 CU1 Availability Groups databases not synchronizing after patching the secondary replica. This seems a little like
http://support2.microsoft.com/kb/3033492/en-us which was for CU3 and CU4 builds. The dashboard on the Primary shows the secondary as not synchronizing. The errorlogs on both nodes show the connection
has recovered but the dashboard shows critical errors. This is running on Windows 2012.
Thanks
ChrisLydia,
I am referring to MS15-009 to MS15-017 that came out on Tuesday. These are the only patches we have applied. On our two node Availability Group setup we had the patches applied to the secondary node and then it was restarted. It came up fine and SQL is running
as expected.
This is from the primary node errorlog:-
AlwaysOn Availability Groups connection with secondary database terminated for primary database 'XXX_DEVL' on the availability replica with Replica ID: {e6468c4d-9431-4052-88c0-07d3b3eb428c}. This is an informational message only. No user action is required.
A connection for availability group 'YYYYY50_AG' from availability replica 'YYYYY50AV' with id [0E53235A-0FBB-4E18-8C40-A0D72F30C36A] to 'YYYYY50BV' with id [E6468C4D-9431-4052-88C0-07D3B3EB428C] has been successfully established. This is an
informational message only. No user action is required.
AlwaysOn Availability Groups connection with secondary database established for primary database 'XXX_DEVL' on the availability replica with Replica ID: {e6468c4d-9431-4052-88c0-07d3b3eb428c}. This is an informational message only. No user action is required.
On the secondary node errorlog:-
Skipping the default startup of database 'XXX_DEVL' because the database belongs to an availability group (Group ID: 65541). The database will be started by the availability group. This is an informational message only. No user action is required.
The state of the local availability replica in availability group 'YYYYY50_AG' has changed from 'RESOLVING_NORMAL' to 'SECONDARY_NORMAL'. The replica state changed because of either a startup, a failover, a communication issue, or a cluster error. For more
information, see the availability group dashboard, SQL Server error log, Windows Server Failover Cluster management console or Windows Server Failover Cluster log.
AlwaysOn Availability Groups data movement for database 'XXX_DEVL' has been suspended for the following reason: "system" (Source ID 5; Source string: 'SUSPEND_FROM_RESTART'). To resume data movement on the database, you will need to resume the
database manually. For information about how to resume an availability database, see SQL Server Books Online.
Nonqualified transactions are being rolled back in database XXX_DEVL for an AlwaysOn Availability Groups state change. Estimated rollback completion: 100%. This is an informational message only. No user action is required.
AlwaysOn Availability Groups connection with primary database terminated for secondary database 'XXX_DEVL' on the availability replica with Replica ID: {0e53235a-0fbb-4e18-8c40-a0d72f30c36a}. This is an informational message only. No user action is required.
Now I see the suspend message. Running the select on sys.dm_exec_requests there are NO DB_STARTUP ones on either node or blocking.
Next action is probably to have the patches removed from the secondary node and see if all is well and then try patch one by one to see which one causes the issue.
Chris -
Introducing Active Directory sites AFTER exchange 2013 installation
Hi
We have multiple physical sites and only 1 active directory site. Email environment is pure on-premises exchange 2013. Each physical site has CAS/Mailbox servers. There are not IP restrictions between these physical sites. Everything
is outlook anywhere obviously.
I would like to introduce NEW AD sites for each of these physical locations.
Do you see any major issues that I need to be aware of?
Can this be done in the middle of the day?
Will there be pop ups in outlooks and disconnects?
I appreciate your help.I haven't had to do this before, but I would probably schedule this at night as there are some changes that will need to be made on the Exchange side of things.
Once you have the new AD Sites configured (Make sure you have at a minimum one Global Catalog, although I would recommend at least 2 in each AD site). You should cycle the AD Topology Service on each Exchange Server (this is going to cause all services
to restart so do it one at a time).
You should also use Set-ClientAccessServer and set the proper site scopes that you want Autodiscover to respond to.
I'm sure there's more, but that's what I can think of at the moment.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
I have activated home sharing but it's not showing up in my iOS devices
I have iTunes 10.4.1 and iOS 4.3.5 on my ipod touch and I have activated home sharing but it's not showing up in my iOS devices. I don't know what i'm doing wrong.
My firewall is allowing iTunes. I even disabled it and see if that would work, and it didnt.I've heard on older versions that you need to disable home sharing, then turn it back on but there's a trick, DO NOT HIT THE DONE BUTTON! when you click DONE it actually closes sharing. after you enter your username and password and hit enter, just go and click on your music folder on the left.
This seems to be the fix for many.
Word of caution - don't upgrade to iTunes 10.5 - it's breaks home sharing. -
Replication with Domain and Sub domain in Active directory sites and services
I seen many AD enviroments and know that when you have mutiple DCs you use Active Directory Sites and services to replicate using the NTDS Settings. If you have a Domain and sub domain do you need to do this as well or does it sync up automatically because
it's a sub domain? A see a couple of domains where the NTDS settings isn't being used to snyc with the child domain. Just wondering if that is normal or will it cause authentication errors?I seen many AD enviroments and know that when you have mutiple DCs you use Active Directory Sites and services to replicate using the NTDS Settings. If you have a Domain and sub domain do you need to do this as well or does it sync up automatically
because it's a sub domain? A see a couple of domains where the NTDS settings isn't being used to snyc with the child domain. Just wondering if that is normal or will it cause authentication errors?
Two way transitive trusts are configured automatically when you create a child domain or tree root domain. You don't have to worry about site/subnet or replication part at least from trust perspective. But make sure site's names are unique in each domain.
How Domain and Forest Trusts Work
http://technet.microsoft.com/en-us/library/cc773178%28v=ws.10%29.aspx
http://technet.microsoft.com/en-us/library/cc730868.aspx
http://blogs.technet.com/b/askds/archive/2008/09/24/domain-locator-across-a-forest-trust.aspx
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights. -
Site does not show correct on Samsung Tablet
Hi all,
I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
cheers,
LarryHi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
Both of them has got android 4.04
See the image with the specs in which it loads correct.(white background)
And here the specs of a older one (dark grey one And arround 3 years old)
And this problem occurs:
So on a newer tablet it shows correct.
Verstuurd vanaf mijn iPhone
Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
Re: Site does not show correct on Samsung Tablet
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Hi Larry
Please let me know if there is any specific page element not showing up correctly on Tablet.
Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
The device details would also help.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I am using firefox 24.0 and my facebook page is not showing correctly
in my pc facebook webpage is not showing correctly but i have tried in another pc at there my fb page is showing correctly
Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
This is my site http://globaledsource.com/ then the characters is not showing correctly. This is what happen in my site http://globaledsource.com/wp-content/uploads/2013/03/MAS_ThemeProbleme-1024x1024.jpg
Hi paulique, the simplest next test would be to disable all plugins and extensions (except Shockwave Flash, which is pretty much indispensable) here, restart Firefox, and see whether your font works without them:
orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
orange Firefox button (or Tools menu) > Add-ons > Extensions category -
Photo events do not show correctly in my iPhone
Photo events do not show correctly in my iPhone. I have 21 events in my iPhoto but they appear in many different groups in my iPhone.
Mine too. Anyone have a clue how to fix this?
Maybe you are looking for
-
Can I connect more than one company at a time?
Hi All. I have to reflect all changes on business partners from one company to another. This reflection has to be on a dayly basis, and I have tried to make a connection to both companies at a time, but have not succeeded. Is it possibly? Best regard
-
Many small probs with my K8N Neo
Specs: K8N Neo Platinum w/ newest version of BIOS (I checked) 1 GB PC3200 Kingston RAM (2x512MB) ATI brand Radeon 9700 pro 128MB 60.0GB Maxtor 5400RPM HD 500w Viomax PSU (30A on +3.3V, 50A on +5V, 25A on 12V) No other PCI cards installed at the momen
-
I am having problem on my ipad mini 2. I only have one Apple ID, and every time I try to post a review, I get the message "you must have purchased or downloaded this item to write a Customer Review." This problem is with most of the Apps.The applic
-
Hi, Cube 0TCA_UA:
-
Can´t get rid of pastor of muppets font, i have Os 10.5.8
i´ve read the same question but the solution didn´t work for me. The thing is that i erased the font and change the font in my safari browser but is worthless... is the default font anyway. It doesn´t exist in my font book anymore but im still writti