Active field empty but able to redirect toword the right G/L Account

Hello everybody,
There is something I hardly understand with the Goods Receipt PO.  When I do the copy from PO every fields getting the right value safe the G/L Account column who appear empty, even if I set that back in the PO.
So I tried to update it manually in the Form properties, but even if I select the right Warehouse and Account.  The system ask me if I want the update the rowa, I say yes.  But the G/L Account stay empty and show an arrow who redirect to the G/L Account no I chose.  But whatever I do that field stay empty.  I don't get it, sometime it workds sometime not.  It depends on the item...
What should I do ?

Never mind, I  found it.  There are  so much options to chose that I forgot to set the accounting by warehouse...

Similar Messages

  • My used postpaid moto g was accidentally activated on verizon while I was trying to activate it on the tracfone boyp program. The phone was activated on tracfone  but I could not dial the number *22890 to finish the activation. The setup wizard on the mot

    My used postpaid moto g was accidentally activated on verizon while I was trying to activate it on the tracfone boyp program. The phone was activated on tracfone  but I could not dial the number *22890 to finish the activation. The setup wizard on the moto g will only let you activate the phone on verizon. Had tracfone cs rep on my landline phone and was waiting for verizon rep on the moto g. Waited 20 minutes but verizon rep never answered.
    How and where do I get help from verizon to deactivate the account and release my meid number. Also how do I bypass the setup wizard so that I can activate my phone on TRACFONE?  Thank you.

    There's no other way to track it other than Find My iPhone.  All you can do is wait to see if it ever goes back online.  The serial number will only help to identify it as yours if it is ever found, and the IMEI number would only allow your carrier to blacklist the phone so it couldn't be reactivated on their network, if the carrier offers this service.

  • I bought an iPhone 5; 16GB and after updating to ios 7 am unable to bypass the activation screen because am told is locked to the owner's iCloud account but I can't contact the owner. What can i do to rectify the situation. Bought the phone for $500.

    I bought an iPhone 5; 16GB and after updating to ios 7 am unable to bypass the activation screen because am told is locked to the owner's iCloud account but I can't contact the owner. What can i do to rectify the situation. Bought the phone for $500.

    http://support.apple.com/kb/HT5818:
    What if I purchase a device that is still linked to the previous owner's account?
    Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.

  • Help please i brought an iphone 4 from my local cash converters but it is locked to the previous owner"s account how do i log in to mine ???

    i brought an iphone 4 from my local cash converters but it is locked to the previous owner"s account how do i log in to mine ???

    Return it and get your money back. There is no way past the activation lock. There is a very high probability that the device is stolen.
    If they won't give you your money back, turn it over to the police.

  • I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring.

    I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.

    Hi,
    There are two easy fixes to this.
    One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
    Two, go to Settings and turn-off "Handoff". This can be found under the General page.
    Hope this helps!

  • HT3486 My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right. I've download several but it always give me the same message: Airport uti....can't be installed... The version of OS X on this version is not

    My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right download. I've been downloading several but it always after havingf instal the first 3 steps the same message: Airport utility....can't be installed... The version of OS X on this version
    doesn't support this base station...
    I need help please to find the correcte download so i can my wii-fii work as soon as possible (because my wife is making me crazy, she can't go on Facebook!!!! )
    Thank's for your help,
    Mike

    Use AirPort Utility 5.6 which contains the features you need. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
    This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
    Download Pacifist here: http://www.charlessoft.com/
    Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
    If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
    Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
    Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
    Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

  • Trying to reset my password (which I have forgot) for elements 13 I have the serial no.  But I can't find the right website to reset? I have "copy & paste " into the browser.

    trying to reset my password (which I have forgot) for elements 13 I have the serial no.  But I can't find the right website to reset? I have "copy & paste " into the browser.

    Go to the main page of adobe.com and sign out if you're already signed in there. Then click Sign In at the upper right of the page. In the next page you will see a Forgot Password link:

  • Ive forgotton my security questions but Apple do not have the right email to send all the reset information to? what do i do?

    Ive forgotton my security questions but Apple do not have the right email to send all the reset information to? what do i do?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (97775)

  • Hi there, I just would like to suppress my ADOBE ID but I didn't find the right place to post my question ! Could you help me ?

    Hi there, I just would like to suppress my ADOBE ID but I didn't find the right place to post my question ! Could you help me ?

    What do you mean by "suppress my ADOBE ID" ?
    The following link might be useful.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Adobe ID and registration chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service-c1.html ( http://adobe.ly/19r6ZDp )

  • How can I place a text field not directly on the left of the page but with an indent to the right?

    Hi everybody,
    I try to create a form in which I want to enter several item under each other
    general info        Item 1               Item 2
                             Name 1            Name 2
                            Item 3               Item 4
    and so on.
    Since it is not possible to insert a table for something like that I would like to enter seperate text fields one underneath the other.
    But every new line starts on the left side and I do not see any way to move a text field to the right with an indent so that "item 1", "Name 1" and "item 3" are aligned the same.
    Can anybody give me a hint?
    Thanks a lot and have a good 2015!
    Oliver

    Hi,
    Insert a blank "Formatted Text" field on the far left, and shrink it down as much as you wish. Then insert your normal text field to the right of that.
    I hope that helps,
    Brian

  • My HTML code works fine in IE8 but pages "jump" slightly to the right and left in Firefox

    I have created a website that looks and works fine in IE8 but in Firefox some of the pages jump a couple of pixels to the left. I have tried to debug it but cannot find any coding errors.

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • Ipod touch shows up under devices on the left in itunes, but only shows "ipod" to the right

    I have an ipod touch 4th generation 64 gb. I connected to iTunes using usb cord. normally, the device shows up in the left hand column of itunes. then on the right, you have the ipod info - summary- music- apps, etc. however, the only thing i get on the right is just the word "ipod" nothing else. no links or tabs or even a sync button. please help

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • I have two Appel Id's but it's not using the right one how do I get it to use the right one?

    Okay I just got my iPhone 4 a month or two ago as a present so my mom and sister set up my apple Id without me and I don't want that id because I can't get in it so I made another one but it's still using the Id my mom and sister made up!!:/ so how do I make it use the other Id?

    SETTINGS - STORE - Sign out and sign in again with the ID of your choice.

  • Hostid command shows wrong HOSTID but in NVRAM hostid is the Right one.

    Hello,
    I have a SFV890 whith Solaris 8 and Ultra SPARC IV.
    We are installing some databases and applications for comunications and monitoring. I don�t know how, but now when I try to get de hostid from the machine with "hostid" command, it shows a wrong hostid.
    But when the machine startup or from OBP banner command it shows the right hostid from the server, that means hostid in NVRAM is Ok and the right one.
    Some licenses we are using ara linked to the hostid number but doesn�t work because, the hostid from hostid command it is not the right one for this machine.
    Someone knows about this behaivor or how to fix this?
    I appreciate your help, pls let me know.
    Sebastian

    Boot the machine from other media (network, CD/DVD) to single user and run hostid.
    That should give you a clue as to whether the change is in hardware/firmware, or if it's just something in the running system.
    Darren

  • I bought a used iphone5. My carrier activated my phone but will not give me the phone until we find out the password to the previous owners icloud account. Am I able to just switch to my icloud account or what would be a good solution for me?

    I bought a used iphone5, I got it activated but my carrier won't let me have the phone until I get the password from the previous owner but the passwords we were given don't work. Is there a way I could switch icloud user to my account without their password? Otherwise, can't I use the phone to atleast call and text without being signed into icloud account?

    Welcome to the Apple community.
    Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

Maybe you are looking for

  • Quicktime 7 does not export to mpeg-2

    Hi, Is this inherent to QT 7? I noticed it as a deficiency in Final Cut Pro 3.0.2, tracked it back to this version of QT. The export choices are the same although with different wording. Did not have this problem after a total hard disk crash which n

  • Applying/Clearing filters in Oracle SQL Developer

    Is there a way to temporarily clear the filter for Other Users (Schemas)/Tables/Views etc. in Oracle SQL Developer? I have a large number of Other Users and sometimes I want to see them all but usually I want a selected list. I don't want to have to

  • Output file location for batch printing

    Hi all, We have a current implementation of Oracle Documaker for our LOB. What we do is run a .BAT file that runs the GEN* brothers (gentnw32, gendaw32, and genptw32). This then uses the XML defined in the DATA segment of the fsisys INI file. This pr

  • Switch connected on 802.1x port

    Hi All, can any body tell me what happens when a switch/hub is connected to a 802.1x port which is configured for guest vlan if switch does not receive 802.1x request on that port from switch/hub..all the pcs connected to that port will be part of gu

  • How to instal and use msn?

    I have an iPhone 4S. Can someone help in how to instal and use msn ?