Active file monitor adobe

I can't find and open service "the active file monitor Adobe". Not present in the services part   from the configurations.

If you invoke File > Watch Folders and get the error message “The Watch Folder Service is unavailable”, restart the file-monitor service:
Go to the Windows Control Panel > Administrative Tools > Services, select “Adobe Active File Monitor vx” (substitute your pse version number for x). Right-click Properties, make sure Start Type is set to Automatic. Then click Start. 
The Active File Monitor service is supposed to be always running, but for some unknown reason, it sometimes gets configured to not run.

Similar Messages

  • Adobe Active File Monitor V12 will not start/ program crashes & other errors

    I have recently installed Version 12 of Photoshop Elements on Windows XP Pro (service pack 3).
    If I try to specify "Watched Folders" PE tells me to start the Adobe Active File Monitor in Admin Tools - Services.
    If I try to manually start this service it reports that:
    "Could not start the Adobe Active File Monitor V12 service on local computer Error 1067. The process terminated unexpectedly"
    If I look at the Event Viewer in XP there are numerous errors reporting that this service has attempted to start automatically with the following error:
    Event Type: Error
    Event Source: Application Error
    Event Category: (100)
    Event ID: 1000
    Date:  30/11/2013
    Time:  17:53:01
    User:  N/A
    Computer: NICOLA
    Description:
    Faulting application PhotoshopElementsFileAgent.exe, version 12.0.0.0, faulting module unknown, version 0.0.0.0, fault address 0x73657275.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 50 68 6f   ure  Pho
    0018: 74 6f 73 68 6f 70 45 6c   toshopEl
    0020: 65 6d 65 6e 74 73 46 69   ementsFi
    0028: 6c 65 41 67 65 6e 74 2e   leAgent.
    0030: 65 78 65 20 31 32 2e 30   exe 12.0
    0038: 2e 30 2e 30 20 69 6e 20   .0.0 in
    0040: 75 6e 6b 6e 6f 77 6e 20   unknown
    0048: 30 2e 30 2e 30 2e 30 20   0.0.0.0
    0050: 61 74 20 6f 66 66 73 65   at offse
    0058: 74 20 37 33 36 35 37 32   t 736572
    0060: 37 35                     75
    In addition the Photoshop Organiser crashes frequently and If I edit a picture and save it to the stack, it does not appear in the catalogue so I have to manually get the picture and stack it with the original. I assume that these problems are related to the above problem.
    My original installation co-existed with Version 3 so I uninstalled this old version then uninstaled and reinstalled version 12. This made no difference to the problem.
    Any ideas on this problem?     

    Thanks for that suggestion Michel.
    Killing the AutoAnalyzer using these instructions (http://barbarabrundage.com/2013/10/31/the-elements-12-auto-analyzer-adobes-evil-undead/doe s ) does seem to have solved the problem of edited pictures not being saved to the stack - although I have noticed that since disabling the autoanalyzer, when saving a file, the editor almost always now does not display the option window which allows you to choose if you want to save with the stack etc. It usually only shows the JPEG quality selector window.
    Its too early for me to say if making this change has reduced the frequency of crashes but it certainly has not solved the problem with the Watched Folders so Im still looking for a solution to this one.

  • Upgrade 9 to 12 - Adobe Active File Monitor 9.0 still running

    I've upgraded from Elements 9 to 12. Windows Task-Manager shows Adobe Active File Monitor 9.0 is still running.
    Is it neccessary?
    If not, how to get rid off?

    You can go to Start>Run>Type services.msc. This opens window services. Select the Active monitor services with version 9. Right click>Stop and go to Properties through right click. Select teh start up type as disabled as shown in screenshot.
    ~V

  • Can't find the Active File Monitor Service

    I just purchased and installed Photoshop Elements 13 on my Windows 8.1 OS. I was having the version 9 on my previous computer and never had any issue with it.
    I want to define the folder that I need to monitor in Photoshop Elements 13. But when I click on the option in the "File" menu, I get a message saying that I need to start the service "Adobe Active File Monitor". Problem is that this service seems not to be installed. It is not listed in my services. How can I fix that? Is there another installation that I need to run aside to have this service installed?
    Let me know
    Thanks
    P.S: I know how to monitor, start, stop, set services. It is just not listed, so probably not installed.

    OK forget about this. I tried the chat with a technician that didn't know what to tell me. He referred me to a senior engineer that suggested to simply uninstall and reinstall the software which indeed fixed the problem.
    So the solution: uninstall and reinstall.

  • Active file monitor is not installed !

    The active file monitor service, allowing the "control records" did not install it does not appear in services.msc
    I know how to reinstall it, thank you

    Hi,
    Are you still having problem installing it ?? Or have you figured out a way already.
    Thanks.

  • Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
    The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
    And Book is still available on the book-store for purchase.
    (If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
    And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
    (If it is the case, then you have to use the correct userID)
    I hope it helps.

  • I created the XML file in Adobe Priemer Pro. Final Cut doesn't see this file. The file in the list not the active. Prompt please.

    I created the XML file in Adobe Priemer Pro. Final Cut doesn't see this file. The file in the list not the active. Prompt please.

    The XML format Premiere uses is not supported in FCPX. The only way I know of that may work is to go through FCP7 and then use 7toX to get to FCPX.

  • Good afternoon ladies and gentlemen!   My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

    Good afternoon ladies and gentlemen!
    My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
    Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
    The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

    <moved from Adobe Creative Cloud to Bridge General Discussion>

  • BPM File monitoring - Alerts not triggered.

    Hi All,
    we have defined the application monitor for file monitoring in BPM.
    the problem is we are not getting any alerts so far,
    the file monitoring paramaters we gave are
    1. file path, filename * and pattern: az*
    we are actually monitoring the availablity of the incoming file, there are also files existing of the same name, the only differentiator is the time stamp.
    As per logic, we will be monitoring the latest file that reaches the folder. but no oupt till now.
    can any one pls tell how can we proceed further, for the requirement mentioned above, all the necassary authorizations are provided.
    kindly advice  on

    Hi Ragu,
    Thanks for the reply.
    The status is gray in RZ20. But when i see in dswp it is in green only.
    I tried activating the file size and filae age parameters, according to setup guide it is mentioned that
    After activating, the most recent file is considered for creation time of file.
    for file size and file age , the existing file details are considered.
    but in my case, creation time of file getting some alerts.....eventhogh no file has come after activation.
    And file size and file age are still in gray when old file are there available in the specified folder.
    kinldy advice on why this is happening.
    Thanks and Regards,
    Subhashini.

  • Could not write to file: C:\Program Files (x86)\Adobe\Acrobat 7.0\ActiveX\AcroPDF.NOR. ?

    Hi, I get this message (loosely translated from Swedish):
    "Could not write to file: C:\Program Files (x86)\Adobe\Acrobat 7.0\ActiveX\AcroPDF.NOR.
    Confirm that you have access to this file"
    when I try to install Acrobat standard 7.0, and after several "retry" I cannot finish the installation.
    Does anyone know why?
    Thank you,
    MIa

    Appears that you are on a Win7, 64-bit machine. AA 7 has an issue with activation since the server no longer exists for AA 7. There is a separate install at Adobe to address this issue that might solve the problem temporarily (Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3). Even if you get AA 7 installed on Win7, you will have to do workarounds to make it work. Both the print driver (Adobe PDF) and AcroTray.exe fail on Win7 and they require workarounds to be able to even use AA 7. It is strongly recommended that you get AA XI at this point.

  • New PC with ADE 4 activated with existing adobe ID, all books won't open with Error! Check Activation

    Hi
    I have recently bought a new PC with windows 7 and have installed Adobe Digital Editions v4.0.3
    I authorized the computer using my existing adobe ID, the same one used on my old PC that ran windows XP.
    I cannot seem to open any ebooks (files with the .acsm extension) or add them to the library. I get this unhelpful little error dialog:
    Error! Check Activation.
    I have tried to deactivate the computer (in order to retry activation), but that fails too with the error:
    Unable to Erase Authorization. Please try after some time.
    Please Adobe.... why does nothing work????

    Ok so, I finally managed to remove the failed activation and then I reactivated after which I could read the ebook.
    I used this method here: I can't de authorize my computer. It just keeps saying to try again later.
    to deactivate, and then repeated the activation process.
    Adobe, surely many many people have this problem with a new install, and to have to resort to editing the registry in order to fix it is just madness.
    Why does the activation fail the first time, and why then does deactivation also fail? PLEASE FIX YOUR PRODUCTS.

  • Where can I get a download file for Adobe Acrobat X Standard?

    I need a download file for Adobe Acrobat X Standard. I have an installation CD & serial # that was never activated, but the computer I'm trying to put it on does not have a CD drive. Is there anywhere I can find a download file for this?

    As long as it is not a Mac there is a chance the download can be found on the following page:
    Download Acrobat products | Standard, Pro | XI, X
    I say "a chance" because Acrobat Standard tends to be an issue when it comes to download availability ...  give it a try.

  • Published EXE file Error-Adobe captivate 4

    Hi,
    I'm having problems with publishing an EXE file in Adobe captivate 4. I know it has something to do with our internet browser settings, we are a Court location and we have strict settings, but I'm wondering if there are work arounds through adobe captivate. See error below:
    -allowing active content such as script and ActiveX controls can be useful, but active content might also harm your computer. Are you sure you want to let this file run active content? Y/N
    -Help protect security, internet explore has restricted this file from showing active content that could access your computer, click here for options.
    If you just select yes and proceed the captivate file runs fine and you can complete the training. Our goal is to be able to publish in this format because it's more stable than the PDF or HTML option but we don't want users to experience this error from the start.
    Thanks for helping with my questions!
    Libby

    Hi, I've been trying to attach an image for the error message we get but not matter what I do it gives me an error and won't let me attach the image. Any suggestions or do you have an email I can send them too. The error message may be a little different than what I sent previously, it seems to give a different error message on different computers. But we are currently trying to create a new release of our training program so this should be the most current error message and the error message people will see when they open it on their PC's. Anyway this is what it says:
    First Error Message:
    File Download-Security Warning
    Do you want to run or save this file?
    Name: BasicCORIS_AttachAnAttorney.exe (name of our file)
    Type: Application, 9.27MB
    From: C:/CourtsOnlineTraining\Program Files\Dist....
    Run     Save     Cancel (we select run, than you get next error message)
    While files from the Internet can be useful, this file type can potentially harm your computer. If you do not trust the source, do not run or save this software. What's the risk?
    Second Error Message:
    Internet Explorer- Security Warning
    The publisher could not be verified. Are you sure you want to run this software?
    Name: BasicCORIS_AttachAnAttorney.exe
    Publisher: Unknown Publisher
    Run    Don't Run
    This file does not have a valid digital signature that verifies its publisher. You should only run software from publishers you trust. How can I decide what software to run?
    I hope this makes sense. Let me tell you a little more about how our training is set up. We load the training on to a USB stick that includes a menu, the training modules, and a shortcut. Once the USB is downloaded on to the users PC they can select a shortcut icon for the training. Once they select the training shortcut it opens a menu that they can select training from. When they select on the desired training this is when they would receive these error messages. Our current release is in a HTML format, but because of this format the training interacts with the web browser and causes us problems so we were hoping to publish in exe and the training wouldn't open in a web browser.
    Let me know if you have further questions or if I've just confused the situation more. Again thanks for your help!
    Libby

  • The number of active Object monitors has overflowed.

    hello,
    please is any one has information about this error? and when it occure?
    Error Message: The number of active Object monitors has overflowed. [87]Exception Rec: EXCEPTION_ACCESS_VIOLATION (00000000c0000005) at 0x000000001006C5E0 - memory at 0x0000000000000000 could not be written.Minidump : Wrote mdmp. Size is 3827MBSafeDllMode : -1
    Fatal Error : The number of used monitors is 2097152, and the maximum possible monitor index 2097151Version
    we found it in the application log file.

    This means that the application currently has over 2 million Objects that are involved in synchronization operations and has created object monitors. This is highly unusual and should be investigated.
    /Staffan

  • File monitor failed to start. Reason: Invalid input parameters

    Hi All.
    Just a quick one here.  I've done this lots of times before, but I am working on one environment (SCO 2012 R2 UR2) where I am trying to set up a simple Monitor File activity.  However, the output I am getting from this during testing is as follows:
    File monitor failed to start. Reason: Invalid input parameters.
    I have seen a couple of posts around for Opalis, but these do not look to apply.
    Has anyone come across this in Orchestrator rather than Opalis, and if so, is there a resolution?
    TIA
    Cheers
    Shaun 

    Hi Shaun,
    the reason for this error "File monitor failed to start. Reason: Invalid input parameters."with the "Monitor File! Activity might be:
    Invalid folder or no access to folder (if you experience between running with Orchestrator Runbook Service and Runbook Tester see
    http://www.sc-orchestrator.eu/index.php/scoblog/99-functionality-differences-executing-a-runbook-with-runbook-tester)
    No Filters specified in tab Details
    No trigger condition specified in tab Triggers
    Regards,
    Stefan
    www.sc-orchestrator.eu ,
    Blog sc-orchestrator.eu

Maybe you are looking for