Active frames disappearing at random on Z30

Hi,
My apps active frames sometime shut itself down for no reason. The most apps I have open at one time is usually 4-6. I usually close down the apps when I'm done using it. Is it possible that my BlackBerry learned my habits and shutdown my apps active frames on the fly? I'm running 10.2.1.2102 model STA 100-5 (Z30).
Thanks for the help in advance.
Solved!
Go to Solution.

In addition I've seen this happen most (an active frame closing & low memory) when the device has not been rebooted for some time. So, if you see this often, reboot your BlackBerry.
Holding on the top edge power button for about 20-25 seconds until the screen blackens and the red LED flashes to start back up.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Frames disappearing

On some websites, http://taoism.net especially, frames often disappear when I navigate within the site. Sometimes they don't and I can't tell what makes the difference. Just when I think an update has fixed the problem, it comes up again.
In the above site, I am talking about the button bar on the left. I think it is called a frame; my apologies if I got the terminology wrong.
Richard

In addition I've seen this happen most (an active frame closing & low memory) when the device has not been rebooted for some time. So, if you see this often, reboot your BlackBerry.
Holding on the top edge power button for about 20-25 seconds until the screen blackens and the red LED flashes to start back up.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I am unable to delete zombie bookmarks (no link) in Normal or Safe Mode Firefox 3.6.13 Mac 10.4.11, bookmarks disappear at random

Firefox 3.6.13 (Mac Mini, OS 10.4.11) has repeatedly been losing my bookmarks in random fashion. For example, all bookmarks in a single folder have disappeared. Randomly, my bookmarks toolbar is truncated to just 6 items, although all toolbar bookmarks remain visible in the Library. The Library will randomly lose the http location for two to four bookmarks and then those "zombie" bookmarks cannot be accessed, deleted, moved, or edited. I've tried Safe Mode, same problem. I've disabled all add-ons in Normal Mode, same problem. I've reverted to bookmark backups and everything is okay for a short time (minutes sometimes, hours others), then the problems reappear on different bookmarks. Totally frustrating and maddening.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Is there a script to create a button to set an activated frame to document size + bleed?

Please see my question above. Thanks in advance!

Here is a script that creates a script that creates a button that sets an activated frame to document size + bleed.
Why do you need a script to create a button that sets an activated frame to document size + bleed? You might as well have a script that sets an activated frame to document size + bleed, because you already need to double-click the script that sets an activated frame to document size + bleed and so there is no need to show another button that you can click to set an activated frame to document size + bleed in that.
theScript = 'var w = new Window("dialog", "Reframe");\n'+
'w.b = w.add("button", undefined, "Click me!");\n'+
'w.b.onClick = function(){ w.close(3); };\n'+
'if (w.show() == 3)\n'+
'{\n'+
'dp = app.activeDocument.documentPreferences;\n'+
'app.selection[0].geometricBounds = [\n'+
'app.layoutWindows[0].activePage.bounds[0]-dp.documentBleedTopOffset,\n'+
'app.layoutWindows[0].activePage.bounds[1]-dp.documentBleedBottomOffset,\n'+
'app.layoutWindows[0].activePage.bounds[2]+dp.documentBleedInsideOrLeftOffset,\n'+
'app.layoutWindows[0].activePage.bounds[3]+dp.documentBleedOutsideOrRightOffset];\n'+
writeFile = new File (app.activeScript.parent+'/new script.jsx');
writeFile = writeFile.saveDlg( 'Save script', File.fs == "Windows" ? "Script:*.jsx,All files:*.*" : function(file) { return file instanceof Folder || (!(file.hidden) && file.name.match(/\.jsx$/i)); } );
if (writeFile != null && writeFile.open("w"))
writeFile.encoding = "utf8";
writeFile.write (theScript);
writeFile.close();

CS6 cutout. Classic mode.Frame disappears in the "ctrl + H". Frame is off all the time.

CS6 cutout. Classic mode. I want to cut out by dragging. However, the selection is moving and moving the mouse click once. I'm having problems. Frame disappears in the "ctrl + H". Frame is off all the time. Happy.

I don’t understand all you’ve written.
As for the effect ctrl-H has you schould be able to change that under Edit > Keyboard Shortcuts.

Blue line around active boxes disappears, cannot figure out why....

Hi ... hope you can help me with this, it's a minor irritation but it's driving me nuts. I'm writing a report that has several boxes with imported graphics in it.
The active boxes have a light blue line around it, with tiny clear boxes in the corners and side mid-points. I can drag any of those tiny boxes to resize the image, or use the metrics inspector to enter the dimensions numerically. But sometimes, when I make the boxes larger, the blue line around the active box disappears.
Those blue lines lining the active box are useful for aligning the graphics boxes, so it would be nice if they stopped disappearing on me.
Anyone know why that happens?
Thanks!
shireen,
new to iWorks

I don't have any troubles selecting and aligning text boxes and graphics since I stopped sending them all the way to the back (arrange menu/send to back). There are times when you want them back there but most of the time you don't. Pages uses layers and one of the layers is the default text layer. Anything behind this text layer is difficult to select.
You can select items behind the text layer by clicking in the area outside the margins and drag the pointer over to the graphic without releasing the mouse. If you use the 'send backward' command the object still remains easy to select.
Some objects that have transparent areas (PDF's created from eps files for example) can only be selected by the click and drag method described above or by carefully positioning the pointer over a black or colored area until the pointer turns from a cursor to a pointer.
Kurt

BlackBerry Travel Active Frame bug

The active frame shows the flight one day earlier than it actually is.
Opening the app fully shows the date of the flight is correct.

[email protected]
Good input
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Detect if JPanel is in the active frame or focused window

Hi,
I have JPanel, and I want to determine if it is in an active JInternalFrame (isSelected() == true), or if its frame or dialog has focus.
I know I can use the KeyboardFocusManager, so do I just search up the container heirarchy looking for the focus owner?

I found that it keeps looking up and up the heirarchy untl it hits the top-level container, so there are cases where you have two internal frames (one active, one deactiveated), and both return true since their parent is the active window. I found a similar way:
// This fragment stops at the active frame, and won't search its parent.
return SwingUtilities.isDescendingFrom(this, manager.getPermanentFocusOwner());Thanks for your help!

Single frame disappears when compressing with de-interlacing turned on

I'm having trouble with a single frame - showing a lightning flash - disappearing after compression. I've found I need to turn on de-interlacing in the Inspector to avoid bad problems with the interlacing showing on edges when panning sidewards, but since I've turned de-interlacing on, this one frame disappears.
I've tried making it a freeze-frame, held for several seconds. I've tried slowly zooming in on the same frame for several seconds. I've tried putting in compression markers all over it. In all cases, the lightning flash is there in Final Cut Pro, but disappears on compression.
Any suggestions?

I dont have the answer, but rather a similair problem. If you don't mind I will add it to your blog here so hopefully someone can answer both our problems with one solution.
I have been compressing the same FCP sequence several times making only small changes to my sequence each time(adding and deleting certain photos per clients request). Now all of a sudden, one on the photos simply does not show up after being compressed. It renders just fine in FCP and exports to Compressor just fine, but after I compress it, when I play it, the two seconds of the sequence that is supposed to show a certain picture, it is just black.

My iPhone contacts/notes disappear at random times. Help?

For the past few months my iPhone contacts and notes have been disappearing at random times. Sometimed they reappear, sometimes they dont. For awhile I was solving the problem by going into iCloud settings and toggling some features off and on. This no longer works. I get the feeling this is an iCloud issue as the "find My iPhone" feature is always off when I go back into settings, even when I have just switched it back on a day or so earlier.
I notice that whenever my contacts disappear the "Find iPhone" feature is also disabled. All of this started when I thought I lost my phone and put it into "lost" mode.
Any suggestions? I phone latest iOS on a Verizon 4S.

No dangers at all resetting the PRAM. I forgot to post instructions earlier so I'll post them below. It's possible resets may handle the issue or it's possible it's something mechanical too such as not enough RAM which is easy to upgrade or a failing HD. BTW how much RAM is installed and what size HD does the machine have and how much is availalble? But let's finish the basic resets (SMC, PRAM and Safe Mode restart) before we start looking at anything else.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

My Close, Minimize, and Maximize buttons disappear at random, have to restart firefox to get them back. Can someone tell me how to fix this?

Don't really think I can clarify any better, my Minimize, Maximize, and Close buttons disappear at random leaving a little blank spot. Can't figure out why.
[http://tinypic.com/r/351698o/5 Missing Buttons]
[http://tinypic.com/r/20zv2nm/5 Extentions]
[http://tinypic.com/r/21debyd/5 Plugins]

Try to disable transparency in Windows, see:
*[[/questions/804050]]
#Right click in a free space on your desktop.
#Left click on Personalization.
#There are four options at the bottom of the screen, choose "Window Color and Appearance".
#Select a border color
#Uncheck: "Enable transparency"
* http://www.tech-recipes.com/rx/966/vista_enable_or_disable_aero_glass_transparency_effect/

IMail: slow performance, disappearing emails, random receipt/dispatch of emails

Other users in this forum have reported problems with iMail after upgrading to ML (e.g., iMail slowing down significantly). I suffer from these problems as well, in particular:
1. iMail has slowed down. I followed the advice of other users and deleted all envelope-type files in the library thus "forcing" iMail to reimport all mails. This helpe for a second, until the next problem emerged.
2. In addition, mails apper and disappear randomly depending on the folder that has been activated/highlighted. After a few minutes, mails in other folders appear and disapper.
3. Furthermore, even when all mails in a folder have been read, reference to "x" or "z" mails that were indicated as unread before would not disappear.
4. Finally, dispatch and receipt of emails also only randomly works, which means that form time to time emails can be sent and received - but the program is no longer stable.
As a consequence, iMail has become unusable as of today. Can anyone help solving these problems? Comments and suggestions very much appreciated.

I am having this problem as well. If you quit mail and reenter it, you will see your exchange mail again. Question, do you that are having this problem have a large inbox? Others in my office are not having the same problem but the only difference I have found is that I use searches to organize my inbox instead of physically moving exchange mails into folders so the inbox doesn't have as many messages.
However, Apple NEEDS to fix this ASAP! This has been an absolute pain in the ***.

Still Frames Disappear in Project Frame

Working with imovie 08, at work, I capture videos from hdv camera. I have to select short clips of work video and create projects from the clips. Then I use the "add still frame to project", and usually the still frames stay in the project frame while I'm doing this. I then use finder to locate them once I am finished. The stills are now disappearing from the project frame and are no where to be found. I had done this procedure many times (30+) with no problem, now I can't find them anywhere. help!

So what I am realizing is that all of my sequences have been created with incorrect settings, thus greatly downgrading the film quality. I wish I had picked up in this earlier rather than the last bit of my production. Because now the 25 minutes of sequences, and nested sequences are all basically incorrect. I figured that the poor display was related to Premieres program monitor, and that after rendering, it would display more clearly. But that is just impossible, when placing uncompressed progressive footage 1366X768, square pixels and 30fps into sequences that are 720X480, 29.97, and a non-square pixel aspect ratio...
So I'm wondering, is there any way to change the sequence settings or place all of the edited footage in new, matching sequences without essentially re-editing the whole film?
Any helpful words are appreciated.

Active frames

Hi,
I am creating internal frames from JDesktopPane, when i create new frame this should be active, but in my case the first internal frame is always active, to see new frame i have to minimisze old ones.
How to make new internal frame is active?
Second Question:-
I have another internal frame it allows user to enter some input data.
I want keep this frame active (on top of all frames) until the user press okay or cancel buttons.
It would be great if you tell me how to achieve it.
Thank in advance,
Regards,
Vasu.

How to make new internal frame is active?[url http://java.sun.com/docs/books/tutorial/uiswing/components/internalframe.html]How to Use Internal Frames
I want keep this frame active (on top of all frames) until the user press okay or cancel buttons. Use a modal JDialog.

How to split a html page without frames and display random questions

1) In my online examination application i need to display timer at the top of the page. even if the user
scrolls down the timer should be visible. is there any way to do this without frames.
2) questions are displayed randomly for each user. iam using rand() function to retrieve the questions from mysql database. now the problem is if the user refresh the page another set of questions are displayed. how to avoid this.
thanks

Hi Thanuja,
Can you try it with the one below..... and checkout whether tht works or not
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
</head>
<script language="javascript">
var i=0
function showDate()
i=i+1
document.getElementById("staticcontent").innerHTML= "<center><b>Time : " + i +" secs</b></center>"
setTimeout("showDate()",1000)
</script>
<body onload="showDate()">
<div id="staticcontent" style="position:absolute; border:1px solid black; background-color: lightyellow; width: 135px;">
</div>
<script type="text/javascript">
//define universal reference to "staticcontent"
var crossobj=document.all? document.all.staticcontent : document.getElementById("staticcontent")
//define reference to the body object in IE
var iebody=(document.compatMode && document.compatMode != "BackCompat")? document.documentElement : document.body
function positionit(){
//define universal dsoc left point
var dsocleft=document.all? iebody.scrollLeft : pageXOffset
//define universal dsoc top point
var dsoctop=document.all? iebody.scrollTop : pageYOffset
//if the user is using IE 4+ or Firefox/ NS6+
if (document.all||document.getElementById){
crossobj.style.left=parseInt(dsocleft)+5+"px"
crossobj.style.top=dsoctop+5+"px"
setInterval("positionit()",100)
</script>
<%
/* JSP LOGIC*/
%>

</body>
</html>REGARDS,
RaHuL

Active frames disappearing at random on Z30

Similar Messages

Maybe you are looking for