Active Hardware Key is missing in ECC 6.0

Hi All,
I have an issues with my ECC 6.0 system. Once I restart my application server due to hardware maintenance. Since that time, I can't logon to my ECC 6.0 except in client 001 with user SAP*. I found in transaction SLICENSE that my active hardware key is missing...
Could anyone help me with this problem ??
Rewards points will be give to you who could solve this problem.
Thank you..

Dear,
Do you have a license installed ? (check the slicense status)
You may request a new license in SAP Service Marketplace at http://service.sap.com/licensekey
Please note that as of Web Application Server ABAP 7.0 the license keys are digitally encrypted. Therefore you must request a new license key for your existing or new system if you are using a SAP product based on Web AS 7.0. Request your digital encrypted license key with license type standard and install it as described in SAP note 870871.
I hope this helps,
Lucio Rodrigues

Similar Messages

Missing active hardware key

Hi
I has an Sap Netweaver Abap Trial Version installed on my machine.
At some time when I wanted to log in using SAPGUI I received an error license message.
I reinstalled the server and SAPGUI. But when I logon I see no active hardware key with which to apply for license.
What do I do to recover this active hardware key?
Thanks and regards
Yuval

I had the same problem. The message server port was already used (you can see in the dev_ms file).
I stop the instance and after with the command
cleanipc nn remove
I free the port (nn is the instance number)
After that we can give the command:
netstat -na|grep 39nn
If there are some process in that port, give the command:
icps |grep sidadm
(with sid SID of sap instance)
If there are other semaphores in that port you can remove it with command
ipcrm -s xxxxx
with xxxxx number of semaphore active in that port
After that, you can restart the Sap instance and verify the dev_ms file.
Bye

SAP NetWeaver 7.01 ABAP Trial / field 'Active Hardware Key' is empty

Hello,
I just installed SAP NetWeaver 7.01 ABAP Trial Version and I am trying to obtain a licence
I log into the system with SAP* user and click on Administer SAP Licenses
I used the transaction code SLICENSE....but then the field 'Active Hardware Key' is empty (so I am not able to request a licence as I have to provide this Hardware key...)
Does anywone have an idea ?
Thanks...

Hardware key should be there in SLICENSE, but anyway you can get that.
Login with <SIDADM> user and execute saplicense -get, it will give you the hardware key. when you receive the License file then you have to install the license from SLICENSE only.
Regards,
Subhash

Active Hardware Key field is empty

Dear All,
In my Quality server, in t.code SLICENSE , the active hardware key field is blank.No hardware key information display. When i apply new license at that time, successfully completion message came then also "Active Hardware Key" and "License Expires On" fields are blank. and i am not able to login into server.
Regards,
Nisit

Hi
Just got through this which will be helpfull
http://help.sap.com/saphelp_nw04/helpdata/EN/ae/6a0f69e96e11d18d980000e816c2ff/content.htm
Also ,please run RZ10 and then generate the profile for active servers ,make sure that default profile is active in the system.
Then run slicense -get on command prompt if windows .
What is the error message while you are loggin in. Paste the log here..
Regards
Bhaskar
Edited by: bhaskar1818 on Nov 7, 2008 4:55 PM
Edited by: bhaskar1818 on Nov 7, 2008 4:58 PM

Sneak Preview NW CE 7.1 SR5 Hardware Key : where to get it from ?

Hi Expert i just installed NW CE 7.1 SR5 ,
     issues:
      1. In order to avail 90 validity i need to provide Hardware key on registration page. How to find this key ?? mine is JAVA stack only??
       2. i dont find irj folder under C:\usr\sap\CE1\J00\j2ee\cluster\apps\sap.com now how can i launch the portal ???
any help would be great.
Regards
Eureka

from start.htm license:
The first step is to obtain the Hardware Key. Log into the system with SAP* user and click on Administer SAP Licenses or use the transaction code SLICENSE. The picture below shows where to find the Active Hardware Key.

Get system Hardware key

Hi Experts
I need to create some kind of security to don't allow copy and install the application in another machine or system. My team define some rules and now i need to implement.
One of this rule is get the Active Hardware license of CE. If i go to NWA -> Configuration Management -> Licenses, i can see it in Active Hardware Key field.
I need to get this value progamatically.
If is possible get it in some screen of nwa, i know that is possible to get in my module.
Someone know how can i do this?
Thanks and regards
Marcos Brandao

Hi Marcos,
You can get the Hardware Key using the OS command 'saplicense -get'. I don't know if there's any API that allows you to get this value directly but I guess you can always invoke this OS command programmatically and manipulate the output to get the value.
Hope it helps.
Regards,
Dao

Exchange BPA Errors (Exchange server is a virtual machine but the additional tools are not installed and The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing)

Hi,
I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
on this service won't be able to start
Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
Hopefully someone out there has had the same issue and can assist.
Pete

Hi Pete,
For the first error message, please try the following steps:
Make sure the Information Store service is in Starting status,
Automatic startup type and works well, as a test we can try to
restart the Infroamtion Store service and verify the service works well.
Start
Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
location is accessible;
Start
Registry Editor, and locate the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
Use the
Permission option under the Security tab to check the permission setting on this key. Make sure
System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
it has Full Control permissions. Please refer to this article:
Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
Link:
http://support.microsoft.com/kb/285116
Start
ADSI Edit, and then browse to the following location:
Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
Right-click the
server name, and then click Properties.
Click the
Security tab, make sure this own server’s server object have
full control permission on its own server.
If not or the object is missing, please modify the permission or click
Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
Click OK, and then close ADSI Edit.
Use
Active Directory Users and Computers to add the current affected
Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
http://support.microsoft.com/kb/297295.
Restart the Exchange Server computer, then rerun the ExBPA.
For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
this message, it will not affect the Exchange servers.
Regards, Eric Zou

Personal Information nodes missing in ECC 6.0

Hi,
Personal Information nodes missing in ECC 6.0
SAP HR Highest Level Support SAPKE60003
EA HR SAPKGPHD03
What may be the reason.
Note: Points will be rewarded immediately.
Kiran

Hello,
thank you so much.
I think that there is not soultion. SAP told me:
Dear Maria ,
You have set the Maximum period, Minimum remaining shelf life and
Total shelf life as zero. I tested this on our internal test system
and when these are all set to zero the fields PROD & SLED are not
visisble in the Material tab in tcode MIGO.
The shelf life is only checked when you enter a goods receipt if the
following prerequisites are met :-
1.The minimum remaining shelf life is maintained in the material master
record or in the purchase order. The minimum remaining shelf life is theminimum number of days for which the material must keep for the goods
receipt to be accepted by the system.
2.The shelf life expiration date check is active for the plant and
movement type in Customizing for Inventory Management.In the
transaction SPRO,if you check in SAP Reference IMG
Material Management > Inventory management and Physical Inventory
> Goods Receipt > Set Expiration date Check,the SLExp/prDt field
is checked for plant and material movement
Regards

Error installing license - Hardware Key Empty

Hello gurus,
We have our SAP ECC 6 installed in one Server running AIX. It´s working good.
Now, we have installed a cluster service. If the First Server stops, the cluster service (IBM HACMP) move all filesystems to Second server. The cluster moves also users, IP address and hostname. After move all resources, then the service starts ECC in another physical server.
This process is working fine. But when the SAP ECC starts on the second server, I cannot logon in system because the license key is not valid. I can logon only with SAP*.
So, when I call SLICENSE to get all information needed to get another license, the field Hardware Key is empty.
I´ve tried too by operating system (saplicense -get). I have now the hardware key and the new license file. This file was installed, but SAP system is not working yet. For information, the license appears as valid, but the field is empty yet and the system doesn´t work.
Anybody have an idea to solve this problem?
Thanks,
Carlos

Hi Carlos,
Please check the OSS notes: 181543 and 538081.
Regards.
Ruchit.

3113: Activity 'XXPONIT/233480' is missing a function reference.

Hello All,
I have designed a workflow in which i have to call workflow for n number of times.
In this workflow i have taken one notification and one function . when user submits workflow, its reached to user's parent level(1). If it approves then forwarded to function. it will check whether for that parent level(1) parent is found or not. if parent is found then it will identify the parent level(2) and sets into Attribute level(1) .
and forwarded back to notification.
when i am trying to run this workflow am getting the *(3113: Activity 'XXPONIT/233480' is missing a function reference.) error.
Eg. ____________Yes_______
| |
v Approve | No
Start---> Notification ------------------> function ------------------> End
| ^
|_____________________________________|
Reject
I am pasting pl/sql code here: Suggest me where i am wrong:
create or replace package body XXPO_WF_NIT_APPROVAL_PKG is
v_user_id number;
v_user_name VARCHAR2(15);
v_flag_parent_exist varchar2(1);
v_item_key NUMBER;
PROCEDURE WF_START_PROCESS(p_user_id NUMBER) IS
v_initiator varchar2(15);
BEGIN
/*To generate Unique Value for item key*/
SELECT XXPO_NIT_SEQ.nextval INTO v_item_key FROM dual;
dbms_output.put_line('item key ' ||v_item_key);
/* To create Workflow Process*/
wf_engine.CreateProcess(itemtype => 'XXPONIT',
itemkey => v_item_key,
process => 'NIT_PROC');
/* For Getting Initiator name who has initiated workflow*/
SELECT fu.user_name INTO v_initiator
FROM fnd_user fu
where user_id = p_user_id;
/*for getting next approver level user name and user Id*/
SELECT fu1.user_name,fu1.user_id INTO v_user_name,v_user_id
FROM per_all_assignments_f paaf1,
fnd_user fu1
WHERE paaf1.person_id = fu1.employee_id
AND paaf1.position_id IN (SELECT ppse.parent_position_id
FROM per_position_structures pps,
per_pos_structure_elements ppse
WHERE pps.position_structure_id = ppse.pos_structure_version_id
AND pps.position_structure_id = 4061 /*PO Test NIT Heirarchy*/
AND ppse.subordinate_position_id IN (SELECT DISTINCT paaf.position_id
FROM Per_All_Assignments_f paaf
WHERE paaf.position_id IS NOT NULL
AND paaf.person_id IN (SELECT papf.person_id
FROM per_all_people_f papf,
fnd_user fu
WHERE fu.employee_id = papf.person_id
AND papf.current_employee_flag = 'Y'
AND trunc(SYSDATE) BETWEEN papf.effective_start_date
AND papf.EFFECTIVE_END_DATE
AND fu.user_id = p_user_id/*1547*/ )));
wf_engine.SetItemAttrText(itemtype => 'XXPONIT',
itemkey => v_item_key,
aname => 'INITIATOR',
avalue => v_initiator);
dbms_output.put_line(v_initiator);
wf_engine.SetItemAttrText(itemtype => 'XXPONIT',
itemkey => v_item_key,
aname => 'ATR_LEVEL1',
avalue => v_user_name);
dbms_output.put_line('6');
wf_engine.StartProcess(itemtype => 'XXPONIT',
itemkey => v_item_key);
COMMIT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
dbms_output.put_line('In WF_START_PROCESS' ||SQLCODE || ':No data found' || SQLERRM);
WHEN DUP_VAL_ON_INDEX THEN
dbms_output.put_line('In WF_START_PROCESS' ||SQLCODE || ':Duplicate values found' || SQLERRM);
WHEN OTHERS THEN
dbms_output.put_line('In WF_START_PROCESS' ||SQLCODE || ':Other Exception' || SQLERRM);
END WF_START_PROCESS;
--====================End of WF_Start procedure================
procedure is_comment_null(itemtype IN VARCHAR2,
itemkey IN VARCHAR2,
actid IN NUMBER,
funcmode IN VARCHAR2,
resultout OUT VARCHAR2) is
v_comments_fst_level varchar2(200);
v_result_fst varchar2(100);
v_count number;
BEGIN
v_comments_fst_level := WF_NOTIFICATION.GetAttrText(WF_ENGINE.CONTEXT_NID,
'COMMENT_FST');
v_result_fst := WF_NOTIFICATION.GETATTRTEXT(WF_ENGINE.CONTEXT_NID,
'RESULT');
dbms_output.put_line(v_result_fst);
IF( FUNCMODE = 'RESPOND') THEN
IF (v_result_fst = 'REJECTED') THEN
IF v_comments_fst_level IS NULL THEN
RESULTOUT :='ERROR: Comment is required while rejecting the request';
RETURN;
END IF;
END IF;
END IF;
dbms_output.put_line(SQLCODE || ':No data found' || SQLERRM);
EXCEPTION
WHEN NO_DATA_FOUND THEN
dbms_output.put_line('is_comment_null'|| SQLCODE || ':No data found' || SQLERRM);
WHEN DUP_VAL_ON_INDEX THEN
dbms_output.put_line('is_comment_null' || SQLCODE || ':Duplicate values found' || SQLERRM);
WHEN OTHERS THEN
dbms_output.put_line('is_comment_null'|| SQLCODE || ':Other Exception' || SQLERRM);
END is_comment_null;
--===================================
PROCEDURE Next_approver(ITEMTYPE IN VARCHAR2,
ITEMKEY IN VARCHAR2,
ACTID IN NUMBER,
FUNCMODE IN VARCHAR2,
RESULTOUT OUT NOCOPY VARCHAR2)
IS
v_count number;
BEGIN
--==============To initiate next approval workflow================
IF( FUNCMODE = 'RUN') THEN
SELECT count(fu1.user_name) INTO v_count
FROM per_all_assignments_f paaf1,
fnd_user fu1
WHERE paaf1.person_id = fu1.employee_id
AND paaf1.position_id IN (SELECT ppse.parent_position_id
FROM per_position_structures pps,
per_pos_structure_elements ppse
WHERE pps.position_structure_id = ppse.pos_structure_version_id
AND pps.position_structure_id = 4061
AND ppse.subordinate_position_id IN (SELECT DISTINCT paaf.position_id
FROM Per_All_Assignments_f paaf
WHERE paaf.position_id IS NOT NULL
AND paaf.person_id IN (SELECT papf.person_id
FROM per_all_people_f papf,
fnd_user fu
WHERE fu.employee_id = papf.person_id
AND papf.current_employee_flag = 'Y'
AND trunc(SYSDATE) BETWEEN papf.effective_start_date
AND papf.EFFECTIVE_END_DATE
AND fu.user_id = v_user_id)));
IF v_count > 0 THEN
v_flag_parent_exist := 'Y';
/* To get next approver name */
SELECT fu1.user_name INTO v_user_name
FROM per_all_assignments_f paaf1,
fnd_user fu1
WHERE paaf1.person_id = fu1.employee_id
AND paaf1.position_id IN (SELECT ppse.parent_position_id
FROM per_position_structures pps,
per_pos_structure_elements ppse
WHERE pps.position_structure_id = ppse.pos_structure_version_id
AND pps.position_structure_id = 4061
AND ppse.subordinate_position_id IN (SELECT DISTINCT paaf.position_id
FROM Per_All_Assignments_f paaf
WHERE paaf.position_id IS NOT NULL
AND paaf.person_id IN (SELECT papf.person_id
FROM per_all_people_f papf,
fnd_user fu
WHERE fu.employee_id = papf.person_id
AND papf.current_employee_flag = 'Y'
AND trunc(SYSDATE) BETWEEN papf.effective_start_date
AND papf.EFFECTIVE_END_DATE
AND fu.user_id = v_user_id)));
--WF_START_PROCESS(v_user_id);
wf_engine.SetItemAttrText(itemtype => 'XXPONIT',
itemkey => v_item_key,
aname => 'ATR_LEVEL1',
avalue => v_user_name);
ELSE
v_flag_parent_exist := 'N';
END IF;
END IF;
IF v_flag_parent_exist = 'Y' THEN
RESULTOUT := 'Y';
ELSE IF v_flag_parent_exist = 'N' THEN
RESULTOUT := 'N';
END IF;
END IF;
END Next_approver;
end XXPO_WF_NIT_APPROVAL_PKG;
Thanks,
sheetal Mittal

HI
I believe the document that you are looking for can be found in the following location. This help file describes the NI-DAQmx Library functions, which you can use with National Instruments data acquisition and switch devices to develop instrumentation, acquisition, and control applications.
Message Edited by jaced on 11-05-2007 12:18 PM
JaceD
Signal Sources Product Support Engineer
National Instruments
Attachments:
NI-DAQmx C help.jpg ‏98 KB

EP6 SP2 hardware key / installation number

Hi all,
unfortunately the license of an EP6 SP2 has expired and I need to find out what are the hardware key and the installation number of this portal in order to renew the license.
As the admin pwd is lost and the sap* user/pwd combination do not work in order to log on to the portal and retrieve the system information via the system admin tab I am wondering if I can find both (hardware key and inst. no.) in the database or on the filesystem. If yes, where??
Any input on this would be greatly appreciated :)!
Thanks alot in advance!
BR Helga

Hi Helga,
One way to enable SAP* is
1. Copy your current sapum.properties.bak to sapum.properties (/usr/sap/XXX/j2ee/cluster/ume)
[ This would only work if this is the original sapum.properties when you initially installed.]
If you copy over the properties from the direct editing
(i.e sapum.properties is in sync with the properties in
the database )tab then set the following properties in the sapum.properties is set.
ume.superadmin.activated=true
2. Restart the server.
Side Effect: You have to redo the UM configuration
Now you can logon as SAP* and get the system information.
Alternative 1:( This may or may not work. I don't have access to the environment or documentation to check out.)
Through Visual Administrator see server license information.
To Access the Admin documentation by the following URL;
http://your portal server:50000/index.html
Hope this helps
Regards
-Venkat Malempati
Message was edited by: Venkat Malempati
Message was edited by: Venkat Malempati

"SD_EDI_QUOTES_ORD_ID01" is missing in ECC 6.0

Hi Guys,
I am working on Upgradation program 4.5B to ECC 6.0, The above Function module is missing in ECC 6.0,
Could you please suggest us, is there any SAP Notes is available for this Function module.
Please suggest us any other way also not to replace the Function module.
Thanks,
Gourisankar.

Had the same issue when trying to generate an 855 outbound.
In WE20, under the Message Control tab, change your process code to SD10.

Error in license check - Error getting the hardware key

Hello,
I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
but I still have a issue to log on, message : "error in license check"
I try everything I found in forums, I have tested the license, see the trace below.
I checked too files dev_w*
It seems there is a problem with server message
I checked in "dev_ms" file, but nothing has been wrote inside.
Please could you help ? maybe someone met the same issue and solved it.
Thanks
trc file: "dev_slic", trc level: 2, release: "700"
Test license for SAP SYSTEM: N4S
rdisp/mshost: n4shost
rdisp/msserv: sapmsN4S
MsIAttachEx: connect to n4shost / sapmsN4S
NiIInit: allocated nitab (2048 at 0xb72fa008)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
NiHsLGetServNo: got service name 'sapmsN4S' from operation system
NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiHsLGetServName: found port number 0E.11/3601 in cache
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
"dev_slic" [noeol] 26L, 1378C 1,0-1 Top
dev_w8
M Wed Oct 19 11:46:48 2011
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
M
M Modeinfo for User T8/M0
M
M tm state = 2
M uid = 9
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTABTC
M lastThFc = THFCBTC
M lastAction = TH_IACT_NO_ACTION
M th_errno = 0
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 31
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0xa665a3b0
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]

Hi,
As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
As you found in the dev_ms trace, the port 3601 for message server is not accessible:
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
Regards,
Srikishan

Dimension key 16 missing in dimension table /BIC/DZPP_CP1P

Hi all,
I have a problem with an infocube ZPP_CP1. I am not able to delete nor load any data. It was working fine till some time back.
Below is the outcome of running RSRV check on this cube. I tried to run the error correction in RSRV. But n o use
Please help.
Dimension key 16 missing in dimension table /BIC/DZPP_CP1P
Message no. RSRV018
Diagnosis
The dimension key 16 that appears as field KEY_ZPP_CP1P in the fact table, does not appear as a value of the DIMID field in the dimensions table /BIC/DZPP_CP1P.
There are 17580 fact records that use the dimension key 16.
The facts belonging to dimension key 16 are therefore no longer connected to the master data of the characteristic in dimension.
Note that errors that are reported for the package dimension are not serious (They are thus shown as warnings (yellow) and not errors (red). When deleting transaction data requests, it can arise that the associated entries in the package dimension have already been deleted. As a result, the system terminates when deleting what can be a very large number of fact records. At the moment, we are working on a correction which will delete such data which remains after deletion of the request. Under no circumstances must you do this manually. Also note that data for request 0 cannot generally be deleted.
The test investigates whether all the facts are zero. If this is the case, the system is able to remove the inconsistency by deleting these fact records. If the error cannot be removed, the only way to re-establish a consistent status is to reconstruct the InfoCube. It may be possible for SAP to correct the inconsistency, for which you should create an error message.
Procedure
This inconsistency can occur if you use methods other than those found in BW to delete data from the SAP BW tables (for example, maintaining tables manually, using your own coding or database tools).

Hi Ansel,
There has been no changes in the cube. I am getting this problem in my QA server. So I retransported the cube again from Dev to QA. But did not help me..
Any other ideas??
Regards,
Adarsh

Keyboard hardware key not working

hi,
i'm trying to set the keyboard hardware keys of my vaio, this is the output of a few commands;
sto cercando di impostare le hardware key del mio vaio, butto qua qualche comando per capire meglio:
cat /sys/class/dmi/id/sys_vendor
Sony Corporation
cat /sys/class/dmi/id/product_name
VPCS11E7E
xev: no output.
showkey -k
keycode 360 press
keycode 360 release
showkey -s: no output
/lib/udev/keymap -i input/event6
scan code: 0x49 key code: vendor
xbindkeys -mk: no output.
is there something useful?
- i've created the file "/lib/udev/keymaps/module-sony-vpcs11e7e"
with this text:
0x49 vendor # VAIO
and i've inserted it in "/lib/udev/rules.d/95-keymap.rules" without results.
- i've created a "file" with this text:
keycode 360 = Super_R Super_R Super_R
and then i used the command
xmodmap file
without results.
what i've to do??
Last edited by syco (2011-08-05 13:06:16)

What happens if you press the key in question then perform a dmesg | tail
Any messages like these:
[136424.699297] atkbd serio0: Unknown key released (translated set 2, code 0x94 on isa0060/serio0).
[136424.699303] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.

Active Hardware Key is missing in ECC 6.0

Similar Messages

Maybe you are looking for