Active Job List

Hi,
I want to check if a particular job is in active status or not in abap code. Please, help.
Regards,
Alok Mehta

Hi,
Job Status Overview Table--TBTCO
Or
Use the FM BP_JOB_STATUS_GET
Please close the thread, if solved
Regards,
Aditya

Similar Messages

HT4775 I made a DVD in compressor and even though the disk is finished, I still see the active job. How do I clear the job off the active jobs list?

A few weeks ago, I launched compressor via FCPX to make a DVD. Everything went fine. The disc burned and ejected from my DVD burner, but the job is still listed under Active Jobs. Nothing I've tried will make it go away. Is there any way to clear that list?

Go into your Home library and open Application Support and then Compressor. Open the History sub folder and within that, open V4. Scroll down to find the job and drag it to the trash.
Russ

Java Printing Service (JPS) How to get printer status and pending jobs list

Hi,
I am trying to determine what is the current status of a printer in my computer as well as what is the list of pending printing jobs at any moment.
I want to monitor activity on a printer in my computer, so I can capture and log the jobs that are sent to my printer over time.
I would like to do so by monitoring the printer pending jobs list (if that can be retrieved through any java method) and make a log of changes in that list.
Any advice on how to get the list of pending jobs of a printer?
I checked the API and JobState class seems to be a descriptor of one single job... I suppose the method to retrieve a list of pending jobs in a printer would return an array of JobState objects... but I have not being able to find yet such method...
Thanks in advance,
JN

Moderator Action:
This post has been moved from the Java Programming,
to the ADF forum, for closer topic alignment.
*... and Comment:*
Get help from people that work with ADF.
They may have already done something like this.

Error in solution manager; no active task list exists in sap change manager

Hi,
i have created a correction in Solution manager but when i want to set it in status in development i receive the message below
No active task list exists in SAP Change Manager
could you please help me?
thanks
C.

cmarrone wrote:Hi,
This says taht your ChaRM configuration is not complete. You need to rectify these errors to work in ChaRM.
>
> listed below the detail of the errors:
> Error in background job for program RSGET_SMSY error message No active job found
1. Please activate the Landscape fetch job for RSGET_SMSY from SPROSolution ManagerBasic Settings-- Schedule Bgd jobs.
> No RFC connection for system CIA client '000'
Please maintain a connection from solution manager to the transport domain system . I belive this is CIA.
> No CTS projects found for project ARC_AM_001
Recheck the transport configurations.
Rajeev

Error when activating Task List

When activating the Task List in PROJECT_SOLAR_ADMIN, I receive the error
     - "Phase change from 'Created' to 'Development without Release' is not possible".
When I do a check on the Project, the only red light i get is for the following two jobs, and i'm not sure if this is the issue? And if so, what i have missed in order to resolve it.
     - Error in background job for program /TMWFLOW/CMSSYSCOL2 error message No active job found
     - Error in background job for program RSGET_SMSY error message No active job found
Thank you for any assistance,
Margo

Margo,
We had similar issues with Phase change, but did not get the messages you are getting.
I don't know the version of SM you are in, but as of 7.0 you can change the status of the project in transaction CRM_DNO_MONITOR.
Exceute transaction CRM_DNO_MONITOR
--> Select the Service desk created for your project and CLICK on "Details" button.
-->Go to change Mode
-->Click on Actions Button
--> select the appropriate stage
IMPORTANT:
Click on save button.
The phase selectedis updated AFTER YOU SAVE only.
Regards
Vijay

SM37 how to quite an active job?

Hi, How do I stop an active job in SM37?
Thanks,
Helen

Double click on the active job and click job details button. From here note the application server and process id(PID) for the job.
Now go to transaction SM51 and double click on the application server name . you will get a list of jobs executing on that server. Select the job checkbox and goto menu Process->Cancel without core. Now come back to Sm37 and check , the job will be cancelled.
Sometimes it does not get cancelled or still shows the active status because it does not fully get diconnected from the process id. So you can check the job from SM37 by going to SM37 and goto menu Job-> check active job.it will make corrections to the job.

How can i get Background Jobs list which is made me?

I created background job using JOB_OPEN and SUBMIT and JOB_CLOSE.
I need to Background Job list which is made me..
Do u know any function or logic?
plz~

[BP_JOBVARIANT_OVERVIEW|http://help.sap.com/saphelp_45b/helpdata/en/fa/096ccb543b11d1898e0000e8322d00/frameset.htm]
BP_JOBLOG_READ

Regarding activation job triggering more than once

hi all,
i have designed a process chain in which there are 5 info packages (same info source) loading into same ods.I have then clubbed these 5 info packages steps in one OR condition.however,there are multiple activations which are triggered i.e. as soon as one of the load is completed one activation job is triggering and similarly it happens with other loads also.
this multiple triggering of activation causes subsequent processes in the chain to trigger multiple times which is not required.
is there way that we can trigger this activation only once.
Please note that OR condition is required and AND cannot be placed in its place.

HI Parth,
I think you cannot do away with AND.
You will have to use it just when the 5 different process complete.
I am not sure how did you make it but i would suggest to go like this:
Loading1
Loading 2
Loading 3
Loading 4
Loading 5
Then you can have the Activation step. after the loading is completed.
Do assign points if it helps.
Do iterate your problem in more descriptive manner if this doesnt helps :).
Regds,
Den

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

Transaction for active article list -sitewise-urgent

Transaction for active article list -sitewise plz

Hello,
You can get site-wise list of articles using transaction MM60. But this shows all the articles - active and blocked.
In order to filter blocked articles, you may create an SQVI query between MARA and MARC tables. In the query, include MARA-MSTAE and MARC-MMSTA in the selection screen. They should be set to blank while executing the query to get active articles.
Thanks,
Venu

ORA-20211: Active job does not exist, cannot link to job record.

Getting the above error while executing OWB mapping in production environment.
Details of the error :
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 1278
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 2110
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2384
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2513
RADRUN -- runtime schema
RADSTG -- Target schema where mappings deployed.
source database is accessed through a DB link.
OWB version - 10.1.0.4.0
Oracle - 9.2.0.6.0
Here mappings are getting executed by calling a pl/sql procedure. This pl/sql procedure is executed every day by scheduling a dbms_job. After the error, the job is in hanging.
Last week also the same error happened, on that occasion , restarted the database and re submitted the job. Mapping executed without any error.
Looking for the expert comments

Hi.
See Note:125860.1 in metalink (and please, lol to solution #3). It applies to older OWB versions though... Are you using DBMS_JOB or OEM to run these mappings? If so, then the metalink note might be useful help.
Karesz, I believe if the source database was down, it would fail with an ORA-12XXX Error.
Regards,
Marcos

Hi: What is Active Vendor List

Hi,
What is Active Vendor List. What type of report it is , and what type of tables and feilds are include inthis.
plz send the responce

HAI,
GO to MKVZ
and generate Report...
there you can see the Change Lay out Button (14 th button from Left)
Click that one it will show you the below fields..
Central purchasing block
Block function
Central deletion flag
Slect them you will get that report..

How to get Active users list in Essbase 6.5.6

Hi Gurus,
How to get Active users list in Essbase 6.5.6 version
I dont find any Esscmd to find active users list....
i used LISTLOGINS command in ESSCMD but its not helping me out....
pls suggest me some approach to find active users list.
Thanks in advance....

Hi ,
Display sessions will give only active users details which are currently connected to the ESSBASE .
if you need this list ? or you need the total list of security active users list ?
if you need the currently connected to the ESSBASE
if you check one server At a time or you can check the application level also
1)server level
display session all;
2)application level
display session on application 'application name ';
go for the run command ---> essmsh-----> login;----->enter user name ----> enter password----->enter host (like server name ) then you need to you above 1 &2 commands
Thanks,
suresh

ABAP/4 processor: UNCAUGHT_EXCEPTION - Activation job cancelled short dump

Hi All,
I loaded data to the new table of ODS successfully. But the data is not available for reporting.
When i try to activate the request,it shows no error bt neither does data *** to active table .I checkd in sm37 for logs, it shows ABAP/4 processor: UNCAUGHT_EXCEPTION error. It shows that CX_SDB_ORA_PROGRAM_ERROR exception was raised.
I also checked in table RSODSACTREQ in SE16 and found that status was 0 (means activation successful) n operation was U (means updating) .........
The same problem persists for activation job for any ODS.......The support package has been upgraded from 11 to 14 recently.......
Please help me resolve this issue.
Regards,

Prithi,
Check out for invalid char's in the PSA.....
Check monitoring for invalid char's .. some time it will reach up to New data table and while activation it may get struc...
hope there is some prob with invalid char's aor length of char.... Special char..like @__ in PSA .
Cheer's
HVR.

Parameter not showing in Active parameter List.

Dear Team,
I have fresh Install SAP 4.7 with sql 200 on Windows 2000 server. After proper installation .I have activate the Profile.
When I Edit the parameter via RZ10 and then add new paramer
i.e Login/no_automatic_user_sapsta 1
Proper save .Then proper Restart the instance .but Its now showing in my Active parameter List.
Whats the reasion. Or what the step i am messing.
Thanks & Regards
Jagdish Kumar

In which profile did you make the change (the program that lists active parameters only lists those for the instance that you are logged into).
Here are some links on maintaining profiles:
[Checking Active Parameters|http://help.sap.com/saphelp_nw70/helpdata/EN/c4/3a62e3505211d189550000e829fbbd/frameset.htm]
[Maintaining Profiles|http://help.sap.com/saphelp_nw70/helpdata/EN/c4/3a62e3505211d189550000e829fbbd/frameset.htm]
Hope that helps.
Joe Haynes

Active Job List

Similar Messages

Maybe you are looking for