Active sense error old roland keyboard
I have seen this on a thread or 2. I am running a Roland MKB-1000 (ancient but unmatched touch). I purchased mainstage 3 recently, running with M-Audio firewire 1814 and mac mini QC i7 2.3/1TBx5400. Love mainstage so far; used Pro Tools on stage for years, this is a dream comparatively, for a live-type environment. However, I have the old problem I've seen around, but haven't seen a fix for: old roland controller sends the active sense messages, so mainstage gets them and shuts off all output if there's no inbound signal from the keyboard. Very problematic with piano; not so bad with organ because organ touch rarely lets off completely anyway. Anyone know how to fix this?
Ok never mind. I figured out how to teach my concert how to ignore cc123 (all output off) messages sent by Roland's midi "active sense." In the concert menu, you add a map for cc123 and tell it to ignore all. Worked great, thanks to "Bluebird" in a different string for putting me on the trail.
Similar Messages
-
My ipod touch has an "activation required" error and the slider won`t work
I have an itouch that is only 2.5yrs old and only gets occassional use. A week ago the slider wouldn't work; power switch didn't work; I reset and then tried (unsuccessfully) to restore to factory settings through itunes but encountered an error. At that point it appeared to be restored and I had use of original feature (clock, settings, etc) but I could not connect to WiFi and when I tried to connect to itunes again it did not recognize my device and now my Windows does not recognize my device. It tried to reset again but now I get an "activation required" error and the slider won`t work again.
I have read of other with the same problem but found no solution
Any help is greatly appreciated,
ThanksNext try thge remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?
I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you. -
Pop-Up Menus and active content errors - Help!
I'm attempting to add pop-up menus to my navigation bar, to
make my site more user-friendly, but to no avail:
I've tried designing pop-up menus in Fireworks, then
importing the html code in, but that gives me errors when I try to
insert the bar. Then, I tried putting my menus in different layers,
with a "show layer" behavior on the button, and a "hide layer"
behavior attached to the roll-off of the layer, but my version of
Dreamweaver won't attach a behavior to a layer.
Then, I noticed the tech-note on this site for the fix to use
pop-ups in a template, so I added pop-up menus directly to my
navigational buttons using the wizard. So here's where my problem
comes in. . .
When I preview my page, it throws up an active content error,
but will still run. I uploaded it to my remote server, but when I
went to the url, no action takes place when I put my cursor over
it. Anybody have any ideas on how to create a pop-up menu that
won't throw up an active content error? I've seen them on plenty of
websites before, but can't figure how to do them.
Any light you could shed would be greatly appreciated!> I'm attempting to add pop-up menus to my navigation bar,
to make my site
> more
> user-friendly, but to no avail:
Sometimes, they make your site less user-friendly. So be
careful.
The DW/FW pop-up menus are usually something that should be
avoided. They
are very poorly thought out and implemented, and will likely
cause you
continuing problems. It's foolish to devote the time to them
that could be
more effectively be placed elsewhere, especially since there
are better
options that work right out of the box, so to speak. Please
check the free
and commercial options here -
http://www.projectseven.com/.
> Any light you could shed would be greatly appreciated!
Don't use DW/FW pop-up menus.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ally86" <[email protected]> wrote in
message
news:[email protected]...
> I'm attempting to add pop-up menus to my navigation bar,
to make my site
> more
> user-friendly, but to no avail:
>
> I've tried designing pop-up menus in Fireworks, then
importing the html
> code
> in, but that gives me errors when I try to insert the
bar. Then, I tried
> putting my menus in different layers, with a "show
layer" behavior on the
> button, and a "hide layer" behavior attached to the
roll-off of the layer,
> but
> my version of Dreamweaver won't attach a behavior to a
layer.
>
> Then, I noticed the tech-note on this site for the fix
to use pop-ups in a
> template, so I added pop-up menus directly to my
navigational buttons
> using the
> wizard. So here's where my problem comes in. . .
>
> When I preview my page, it throws up an active content
error, but will
> still
> run. I uploaded it to my remote server, but when I went
to the url, no
> action
> takes place when I put my cursor over it. Anybody have
any ideas on how
> to
> create a pop-up menu that won't throw up an active
content error? I've
> seen
> them on plenty of websites before, but can't figure how
to do them.
>
> Any light you could shed would be greatly appreciated!
> -
Installing old wireless keyboard drivers on a new bootcamp?
I wanted to share an experience of keyboard problems with windows 7 and bootcamp, and then ask a question about bootcamp on my soon-to-arrive shiny new iMac.
Current machine: Core 2 duo 24" iMac mid 2007; Mavericks; bootcamp created with version 3.0, but then upgraded for Windows 7
Yesterday did an upgrade install from Vista to Windows 7 and installed the latest bootcamp version 4 drivers. (this was a 32 bit not 64 bit setup - since the Vista I upgraded from was 32 bit).
I then had driver problems with my 2007 vintage wireless keyboard... The keyboard would work for a moment or two, but then stop. It was still paired, but nothing you typed showed up in Windows. (It worked fine in OSX of course...)
Eventually after huge amounts of googling some page gave me the idea of changing the driver for the keyboard.
If you go to Control Panel -> Device Manager -> Human interface devices -> Apple Keyboard then right click and select "Update Driver Software", then select "Browse my computer", then select "Let me pick", you get a list of all the driver versions that have ever been installed on your computer for that peripheral. Because I had started out with a Bootcamp 3 installation, which I'd then updated, the version 3.0.0.0 apple keyboard driver was still in the list of available drivers. Selected that, and bingo, the keyboard worked perfectly.
Only issue is, I've just bought a nice new iMac (arrives next week) and I can't see how I can get the version 3 keyboard driver onto it's boot camp. I want to set boot camp up from scratch, so that I can have 64 bit windows running. But if I do that Boot Camp Assistant 5 will install the very latest drivers, presumably including an apple keyboard driver that doesn't like my old wireless keyboard. And while the bootcamp 4 and subsequent driver sets include separate .exe files for different things (including the keyboard), the 3.x drivers were just a single executable. And if you try to run it on top of a more recent set of drivers, it just tells you it isn't needed and stops.
Question: Any idea how I can install the 3.0.0.0 keyboard driver on a brand new iMac with Bootcamp 5.0 set up?
(For various reasons I've ordered my new mac with the wired keyboard, but I might still sometimes want to use it with my old wireless one).It depends on which version of LP9 you own.....
If you don't already own an earlier version you cannot buy Logic Pro 9 any longer from Apple.. It is discontinued....
If you do own an earlier version then...
App Store version? Just sign into the Mac App Store... using the same Apple ID you used to purchase Logic in the first place...and Logic Pro 9 will be found under the Purchase Tab for you to click on and download..
DVD Version? Install via DVDs .... If you don't have a DVD player in your Mac you will need to purchase an external one.... or use another Mac which has a DVD drive using Remote Disk
DVD or CD sharing: Using Remote Disc
Install....
Do not run Logic but instead....
Update to 9.1.8 via this link....
Logic Pro 9.1.8
Now launch Logic.... -
Error : Old and new exceptions cannot be used at the same time.
HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
EXPORTING
alg = 'MD5'
data = iv_iss
IMPORTING
hash = lv_issu
EXCEPTIONS
unknown_alg = 1
param_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
RAISE EXCEPTION TYPE cx_user_mng EXPORTING
textid = cx_user_mng=>wrong_isrs.
ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PMHi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman. -
Trying to activate win 8.1 and tablet get activation sever error
finally remembered my password- now I get "activation sever error" what is this???
finally remembered my password- now I get "activation sever error" what is this???
-
Hi, dear
please help me in unlocking my iPhone 4s
it is only iCloud activation locked. my old Apple ID Disabled.You need to re enable your iid http://support.apple.com/kb/ts2446
Then read about activation lock. http://support.apple.com/kb/ts4515 -
While check in an activity got activation failed error
Hi All
When i clicked an activity and select Check in option it shows the Activation window .Then when i clicked on Activate button i am getting Activation failed error.Below is the error message:
Activation failed: Incorrect content-type found com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.ContentTypeImpl 3021c6 Service call exception; nested exception is:
java.lang.Exception: Incorrect content-type found com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.ContentTypeImpl 3021c6
Can any body help me in solving the above error message so that Activation of activity will be successful?
Thanks
SusmitaJust check the full hostname of your DTR server, should be like
hostname.company.com
and check if somewhere only
hostname
is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
ping hostname
and
ping hostname.company.com
Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM -
Has anyone ever received the error 'Error with Console Keyboard' when installing Solaris 8?
Before Solaris prompts me to select my language I get the
error 'Error with Console Keyboard'. When Solaris prompts me for the
language I cannot select it since my keyboard no longer seems to be
working.
I have no problems with my keyboard before this step.
Any help or insight would be greatly appreciated.
Regards,
SExactly!I have the same problem when I try to install Solaris 8 on Dell CPi laptop. who else can help us? please!
-
An Active Directory error 0x51 occurred when trying to check the suitability of server
We have several exchange administrators and two exchange 2010 servers and one exchange 2007 server. I am getting the following error message
when opening up Exchange Management Console on one of the exchange 2010 server.
"An Active Directory error 0x51 occurred when trying to check the suitability of server 'dc101.domain.local'. Error: 'Active directory
response: The LDAP server is unavailable.'
dc101 does not exist anymore. I tried changing the Configuration Domain Controller by manually specify a domain controller but get the exact
same error message and also gets an empty list when selecting the domain. Other administrators who logs into to the same server do not get this error message.
If I open the exchange management console on another exchange server, it works without problem. Is there a setting somewhere I need to change
to point it to the correct domain controller using power shell?I fixed it for myself.
Organization Configuration->Modify Configuration Domain Controller->select Use a default domain controller
-
Activation server error on ADE 3.0
Hi!
I unistalled ADE 4.0 and installed 3.0 because 4.0 wouldn't let me open .acsm files or transfer them to other devices. Now, on ADE 3.0, when i try to open an .acsm file, it comes up with a computer autorisaton window which reads "activation server error - code E_ADEPT_INTERNAL"
when i checked both the device and computer authorisation, it says that they are both authorised.
please help!It is important that the shared_pool value be specified in bytes. For example:
shared_pool= 100000000
If you are running on 9i, another possibility is that the shared_pool setting is not taking effect
when the database is bounced. In 9i there is a new startup file called the "spfile". This is just
like the init.ora file with the following differences:
1. It cannot be edited by a standard editor. It is a binary file.
2. Any system changes to the database while the instance is running (e.g. via alter system) are automatically
written back to the spfile.
By default, when the 9i database starts up, it first looks for the spfile. If it finds one it uses the
settings defined in it. If it doesn't, it looks for the init.ora file.
When a 9i database is installed both init.ora and spfile.ora are created for the instance by default. Changes to
init.ora are not seen by spfile.ora unless the "create spfile" command is used to sync them up.
To get around this behavior, there are several options:
1. remove the spfile so that only the init.ora file exists. The database will then use init.ora exclusively.
2. sync up the init.ora file and spfile.ora file using:
create spfile='spfile.ora ' from pfile='init.ora'
where 'spfile.ora' and 'init.ora' are replaced with the appropriate names for your instance.
3. Explicitly reference the init.ora file when starting up the database using:
startup pfile='init.ora'
where 'init.ora' is replaced with the appropriate name for your instance.
-Todd -
Do I need an audio interface between my roland keyboard and alesis 8.0 multitrack mixer when interfacing with Garage Band? Or can I just go direct USB MAC into the Alesis Mixer with keyboard directly into the Mixer? ie, is the interface overkill?
First of all the Alesis 8.0 is a usb audio interface so you already have a interface. Next you could go from the Roland into the Alesis into the Mac. You could also go from the Roland headphone or line out into the Mac Pro audio input. And depending on what Roland keyboard you have, you may be able to use Midi (usb) and use the Macs Midi voices.
-
All of a sudden, my iMac 20" 2 Ghz is returning a "sense error" when I try to burn DL DVDs. I'm using Toast 7.02, but from what I can gather, sense errors come from the drive itself. Mine is a "Matshita DVD-R UJ-845." I've searched the forum, and the usual answer seems to be that you should make sure buffer underrun protection is checked (it is) or close unnecessary apps (they're closed) or slow down the burn to 1x (I don't seem to have this choice, the menu offers "Best," and "2x DVD"). Beyond this, everyone seems to suggest that its the media. But I'm using the same media (from the same package) that I've been using successfully for months. The media is labelled Memorex, though the drive reports it as Ritec. I haven't changed anything I'm aware of. I've just suddenly lost the ability to burn.
Any suggestions?
Thanks.All of a sudden, my iMac 20" 2 Ghz is returning a
"sense error" when I try to burn DL DVDs. I'm using
Toast 7.02, but from what I can gather, sense errors
come from the drive itself. Mine is a "Matshita
DVD-R UJ-845." I've searched the forum, and the
usual answer seems to be that you should make sure
buffer underrun protection is checked (it is) or
close unnecessary apps (they're closed) or slow down
the burn to 1x (I don't seem to have this choice, the
menu offers "Best," and "2x DVD"). Beyond this,
everyone seems to suggest that its the media. But
I'm using the same media (from the same package)
that I've been using successfully for months. The
media is labelled Memorex, though the drive reports
it as Ritec. I haven't changed anything I'm aware
of. I've just suddenly lost the ability to burn.
Any suggestions?
Thanks.
I have the exact same setup. I can burn SL Maxell DVD-R's but I can no longer burn to DL Memorex DVD+R's. Frustrtaing. Hopefully my superdrive is not going! -
Pls, help. Activation lock with old ID not my ID when update ios 7.0.4
i bought old iphone 4s with ios 7.0.3, i signed in my ID icloud in setting. i update ios to 7.0.4. I get activation lock with old id not my id. I can't pass activation lock my iphone, pls...help me
hoatrieuvan wrote:
i restore ios 7.0.4 and I get the old previous owner ID. pls.... help
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
Maybe you are looking for
-
I am trying to access iPhoto from my MacBook Pro on my iPhone 5s
I am trying to access iPhoto on my iPhone 5s from my 2008 MacBook pro. I have synced both devices, have set up iCloud, have downloaded iOS7 and Mavericks, and have photo sharing and photo stream turned on on the iPhone. I am using iPhoto '08, version
-
All of a sudden my iPhone 3GS gave me a message about setting "Location Services" I think? anyway, when it failed a few times, I was then directed to "restore" my phone. tried that and POOF!!!! could not be restored. Now have a cute little paper w
-
Iphone 6 speaker having echoes! And camera keep freezing. Help!
My one month old iPhone 6 having some problem. First the camera tends to lag or sometimes blackout when I want to take photo. Secondly, the speaker has echoes. Please assist. Am I eligible to exchange for a new unit?
-
I know this is a general question and not ABAP realted but I thought an ABAP'er is would be just as likely to know the answer. When creating cendors via a custom BDC, they all automatically block. Is there a setting that can undo this or do I have t
-
Fail to gunzip the OracleAS 904 for HPUX version
Hi, I have downloaded OracleAS 904 for HPUX version, gunzip is okay for Disk1 and Disk4, I got mesg like "unexpected end of file" for Disk3.gz and Disk4.gz. How to get the gunzip working for these two files? Are there anything wrong with them? Thanks