Active Sync does not start as domain user with no Administrator rights.

Hi all,
Searched the forums and the net but can't find anything about this.
Situation:
In a domain where users only have standard users rights I installed on a PC as a domain admin Active Sync 4.5
When I logon as a user the Active Sync software can not be started.
I disabled the firewall and even set full rights permission on the Active Sync directory both didn't help out.
When I m logged on as this user I can choose to Start the program as a different user.
This only works when I Start it with the domain administrator account.
I hope that I do not have to give that information to this user to make this software work.....
Anyone had the same problems? Anyone a idea?
Thx in advance.
Kind regards,
Aartjan

try this:
1. make sure you install "activesync" from local harddisk (not from network), and do not delete the setup file after
installation
2. local in as "local administrator" and connect your PDA and make sure it can sync, I did not create a profile and just leave PDA connect as "guest" for now
3. log off and re-login as "domain user", connect with USB should work
4. if they still cannot communicate, run "ActiveSync" from start menu
it works for me

Similar Messages

Itunes does not start for one user but works for others on the same mac

All of a sudden my itunes does not fire up.
All other users on the same mac it is working fine.
I have deleted and reinstalled itunes.
Any help would be great.
Cheers

All of a sudden my itunes does not fire up.
All other users on the same mac it is working fine.
I have deleted and reinstalled itunes.
Any help would be great.
Cheers

Photoshop does not start, instead, only annoys with CS6 Extended Test Version

Hello all,
since today, after a correct start, when starting Photoshop CS6 (Windows), only a dialog stating "Login for CS6 Extended Test Version" (or similar, as the text is in German). Afterwards, Photoshop simply exits. How do I get rid of this and make PS start as usual, as I do not want to test the extended version.
Thank you and best regards,
Dirk

Thank you for this information. I do not use Creative Cloud and just purchased Photoshop CS6 for my laptop. When I install Application Manager as suggested in the link, I get a Creative Cloud icon that -- when clicked -- asks me to enter my Adobe ID. I deliberately do not want to use Creative Cloud, just continue using CS6 on my laptop.
As the startup screen insists on entering my Adobe ID, I did. And now Photoshop starts as Extended in test mode and does not allow me to (Help ->) Deactivate.
How do I get rid of this Extended test license (I do not need the "Extended" features) and return to my original one computer CS6 license without having to use Creative Cloud.
Thank you and best regards
Dirk

Macbook Pro does not start. Grey screen with logo and status bar going on forever.

I have a Macbook Pro, late 2010 running with OS Mavericks. Lately it became very slow but never had major issues like crashing. Lat night, I tried a hard restart because it was stuck and I cannot get it to restart ever since. I get sound and grey screen with logo. The status bar is going on forever but does not boot. Can anyone help, please?

Try a safe boot:
http://support.apple.com/kb/HT1564
If no success, boot into recovery:
http://support.apple.com/kb/ht1310
Select the recovery partition and then from the 4 option menu select Disk Utility.
Open Disk Utility>First Aid and run Verify and Repair.
What are the results?
Ciao.

User with Farm Administrator rights, but NOT in Farm Administrators Group

I have an account that we recently discovered has Farm Administrator rights and was used to access Central Admin and cause some harm. When I use the "Check Permissions" on the Central Admin site, it says that account has Full Control via
the Farm Administrators Group. However, that account is not in the Farm Adminstrators group.
There is an entry in the Farm Administrators group for "BUILTIN\Administrators" and this account is in the Local Admin group on this server. However, there are other accounts in the Local Admin group too, and when I "Check Permissions"
for them, it returns 'None'.
I am confused as to how this one account has Farm Administration level access, while others in Local Admin do not, and how can I remove this accounts Farm Administration rights if it is NOT in the Farm Adminstrators Group?
What are the potential problems/issues if I remove the "BUILTIN\Administrators" entry from the Farm Adminstrators Group?
Thanks in advance for any feedback/help.

If you have BUILTIN\Administrators as part of the Farm Admins, any user that is a Local Administrator will have Farm Admin rights. SharePoint doesn't enumerate groups when checking permissions, so the behavior you're seeing is correct. If you do not want
Local Admins to have Farm Admin rights, remove BUILTIN\Administrators from the Farm Admins group in SharePoint.
There should not be any issue with removing the group from Farm Admins, only that users will need both rights to fully manage SharePoint.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

LightRoom 2.3 Does not show up in "open With" when image right clicked..Why?

Hi,
I noticed that when I right click on an image and highlight OPEN WITH LightRoom does not show up as a choice.. Just CS4 and other programs. Is there a way to get it to show up?

You can do it. Right-clicking and "opening with" LR is no different than dragging a file from Windows Explorer into the grid view. In either case the import dialog will be launched. If it's already in the catalog you'll get that dialog.
Windows is seemingly unpredictable from time to time as to adding file associations to the context menu. In any case, if you go to the bottom and click "choose program" you can select LR from the expanded list, or navigate to find it if necessary (which shouldn't be necessary).
Typically once you choose it once, it will continue to appear in the short list for that file type, though it depends what new pieces of software you install and how they're associated with file types either upon or after installation.
You can also drag the file(s) from your Explorer window into the grid view, or drag onto the LR icon on your desktop or in your quick launch, which will launch LR and bring up the appropriate dialog.

MacBookPro does not start in Single User Mode

I am trying to boot my MacBookPro in Single User Mode. I read I should power off computer then start it while holding Command-S. I don't know what I am doing wrong but whenever I try, Mac just load normally and load the system.

Nevermind, seems to be working now!

WebLogic does not start due to issues with WLS_DIAGNOSTICS000000.DAT

My customer is getting the following exception everytime he tries to restart his WebLogic services:
####<Jun 16, 2009 9:23:46 AM MST> <Critical> <WebLogicServer> <hqpsfindev> <PIA> <main> <<WLS Kernel>> <> <> <1245169426020> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: [Store:280020]There was an error while reading from the log file
     at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
     at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.store.PersistentStoreException: [Store:280020]There was an error while reading from the log file
     at weblogic.store.io.file.Heap.getNextRecoveryFile(Heap.java:794)
     at weblogic.store.io.file.Heap.open(Heap.java:181)
     at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
     at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:353)
     at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
     at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
     at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
     ... 4 more
Caused by: java.io.IOException: Error reading from file, Reached the end of the file., errno=38
     at weblogic.store.io.file.direct.DirectIONative.read(Native Method)
     at weblogic.store.io.file.direct.DirectFileChannel.read(DirectFileChannel.java:133)
     at weblogic.store.io.file.StoreFile.read(StoreFile.java:281)
     at weblogic.store.io.file.Heap.getNextRecoveryFile(Heap.java:792)
     ... 10 more
He has narrowed this down to the following: He deletes
...\domain\servers\WebLogicAdmin (or managed server)\data\store\default\XXXXX.dat (WLS_DIAGNOSTICS000000.DAT). He also deletes the .dat file under diagnostics and then the service starts without issue.
Can't be doing this every time he bounces his server.
Does this call stack indicate lack of disk space?
Caused by: java.io.IOException: Error reading from file, Reached the end of the file., errno=38
Is there a way to disable diagnostics so this files don't get generated?
Thanks!

Diagnostics is normally disabled by default, but I recall that there was a bug a long while back (since fixed) that left it on by default. The following thread might help shed some light on the issue:
Disable or reduce size of diagnostic archive?
Regardless, the unexpected low level exception could be an indication of a bug in the WebLogic file store code. The only time I'd expect to see this is if somehow there are two processes that are both using the same file at the same time (on most operating systems the store lock's its files to as a safety precaution to help prevent customers from making this mistake).
Tom

Sync does not work on htc desire with new android upgrade

upgraded to the new android firefox, had to re sync my device. And none of the bookmarks have transferred over. Left it 24 hours and still none of my bookmarks. tried clearing my sync data and redoing, no joy. This is on an HTC Desire.

Hi!
Sorry to read that you are facing issues with the new Beta. Indeed there's a known issue with having the new Beta with other sync versions in Android. You can learn more here:
https://wiki.mozilla.org/User:Anaaktgeboren/NativeSync#Android_Sync_behavior_with_multiple_Firefox_versions_installed
Make sure that you don't have any previous Firefox version in your phone to make it work.
Let me know if it works.

Firefox sync does not replace my local data with server data

I reformatted my laptop and re-installed Firefox 3.6 and also the add-on. I manage to setup firefox sync and chose the option to erase local data and replaced with server's data. to my dismay, my bookmarks are not synced.

If you didn't make a backup of the Sync key before reinstalling Windows then you can't access your sync account to sync your data to the new installation.
If you reset your sync key and generated a new sync key then that causes your data to be removed from the sync server and can't be accessed anymore.

Mac does not start and a cartel with a question mark appears. what does it means?

it's the second time it happens. I start Mac and a folder with a question mark appears, then I close and restart and Mac opens normally. What's going wrong? Thank you for any help

Welcome to the Apple Support Communities
The question mark appears when your Mac can't find a bootable volume to start from, and it may indicate that your hard drive is failing.
Open Disk Utility, select Macintosh HD in the sidebar and verify the disk. If it finds a problem, you will have to repair the disk, starting your Mac from the Snow Leopard DVD

After upgrade to 2.6.28, vmware workstation does not start

After upgrading to the 2.6.28 kernel, vmware does not start. It complains with:
Could not open /dev/vmmon: No such file or directory.
Please make sure that the kernel module `vmmon' is loaded.
I have found that I can run the following command to load the modules:
vmware-modconfig --console --install-all
But after a reboot, the modules aren't loaded again.
Not sure how to get the modules to autoload properly.

You need to go to the wiki under Installing VMware.
Search until you find 2. Start and stop script
Create the script in /etc/rc.d directory and make sure you chmod 755 the file.
Add mkvmdev to the rc.conf file under daemons.
This should now work properly.
I was able to get it working using Vmplayer.

"Domain Users" group in Active Directory does not belong to any Group Membership in LC

Active Directory user belonging to "Domain Users" group does not belong to any Group Membership in LC, why does it not belong to "Domain Users" group?
Any way to correct this issue, without changing group membership on AD side?
If Active Directory user is member of "Domain Admins" or "Users" then these show same group membership in LC.
Thanks.

If you want to use the Domain Users group for the purpose of representing all the users then you can use the "All principals in domain xxx" group which is created by UM.
Coming back to Domain Users group. For determining group membership in AD UM uses "member" attribute of the group object. "Domain Users" group is treated differently by AD. It is the default primary group for all the users and normally members of the primary group are not specified using the member attribute.So when we sync the data from AD "Domain Users" membership does not get completed.

User Profile Incremental Sync does not views changes in profiles.

User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD.
All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
1.profile property is set up to sync with AD attribute (with EXPORT).
2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
3. sharepoint server 2010 SP1, "CU June 2012" 14.0.6123.5002
4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
which I resolved by clearing timer service cache.
Help with advice, urls or solurions please..

Hi VlH,
According to your description, the issue can be caused by the Profile or Profile Values table.
You can check the event log and ULS log to see detail error message.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For your issue you can refer to the similar thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
Also a good blog for user profile synchronization:
http://www.harbar.net/articles/sp2010ups.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Itunes does not start and i cannot sync my iphone 4

I have installed Itunes 10.1.1.4 on my computer running Windows XP but it does not start. This prevent me to sync my new iphone 4.
Previously I had other versions of itunes on the computer and sometimes the same problem happened.
I did a search on Apple support and I followed the instructions (itunes disinstallation and reinstallation) but it didn't work.
I tried also to disable all the startup app but itunes using msconfig (as again suggested by apple) but it din't work as well.
Somewhere on internet I found that Bonjour could create the problem: using services.msc I disabled it but it din't work as well.
I would appreciate very much if someone could help me.
Thanks in advance.
Regards
Giovanni

Hello tomcat.vdm,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Best of luck,
Mario

Active Sync does not start as domain user with no Administrator rights.

Similar Messages

Maybe you are looking for