(Active Version) in transport means?
Hello Experts,
I have added the datasource to the Transport it gives me a message that 'mixed objects added' and after that I see in the se01 > transport request. Node is Datasource(Active version) > 8ZIOB1
Wondering if this is okay or If I have done any mistake..
Thanks in advance.
BWEr
Hi,
You will get the message "DataSource (Active Version)" if you add Datasource into your transport.
That is not a problem.
Thank you
Arun
Similar Messages
-
Error while Releasing a transport request - DSO 0SD_O03: Active version
Hi all,
I am getting below error when I am trying to release a transport request.
Object ODSO 0SD_O03: Active version differs from modified version.
I activated DSO again,but I was not successful to correct the error.Please help me correcting this error.
Regards,
Bobcheck
match and copy while installing the business content
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.With the most important object types, the active version and the SAP delivery version can be matched.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually.
A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content.
When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Installindicator separately.
The active version is overwritten with the delivery version if
the match indicator is not set and
the install indicator is set.
check following thread
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true
Thanks and regards
Kiran -
Transporting active version of datasource from DEV to PRD
Hi,
When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
ThanksHi,
Pls Refer this link for details about transporting BI Objects
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps,
Regards
CSM Reddy -
Transport Request Active version not correct
Hi,
We have been moving the Trasport Request from Development to Quality. Here each time a new version is created.
But when i was testing it was taking the runtime of
old version even though the Active version is the recently moved one.
I have also tried deleting the old version of the workflow
in Quality and moved again, this time it is not moving.
This is R/3 4.7, Level55, Was 6.2, Travel workflow (BUS2089)
Please let me know if you have any idea.
Thank you,
Regards,
Boobalanhi,
the same issue occured for my workflow as well. Please try this out as well, this rectified our issue ;
Phenomenon:
You have changed your workflow template in client 000. If you look to the workflow definition in another client with SWDD, then you see the newest version as just maintained in client 000. But at runtime, the old (former) version of the workflow definition is used.
Cause:
When activating a workflow template, then also some client specific data is replicated from client 000 to the other clients. In this replication there is currently an error. I just talked to a workflow colleague. The problem we have observed seems to be just the tip of an iceberg ... . They are working on the issue(s) related to this.
Workaround:
Execute function module SWD_WFD_REPLICATE_FROM_9999 in the client, you need to have the newest template definition. Enter your workflow template ID (with pattern "WSxxxxxxxx") in parameter IM_TASK and execute. Make sure that you do not lock the template in SWDD.
Then you also (may) need to execute transaction SWU_OBUF to synchronize the buffer. -
System generated new version after transport
I have noticed that after transport, the system automatically generated a new version in the receiving system and mark that as active. Is this usual? Should I just leave it as it is?
Many thanks,
KathrynYes, this is really usual.
Workflows work version dependant, this means that your active workflows running in production do not get affected when transporting a new template.
In all of the workitem tables (sww* tables) version is always included as a key field.
That's why you have to double check if you're changing a task/method, these are version independant.
Kind regards, Rob Dielemans -
Active version of BW Data Source Dev Appears inactive in Q
Hi All,
This is urgent..needs to move to prod today but I am stuck in D still!
Does anyone know why a particular BW data source which is active inn Dev might appear to be inactive in Q after the transport?
We tried manual replication, transporting replica and reapplying the transports, recollecting the data source in both r3 and BW
I also verified that I am collecting the active version in my transport
Thanks,
DB
Points will be assigned if I can get rid of this issue!
Edited by: Darshana on Jul 14, 2008 7:34 PM
Edited by: Darshana on Jul 14, 2008 7:34 PMHello Darshana,
Make sure the appropriate "Conversion of Source System names after transport" are maintained in target system QA and Prod.
RSA1 > Tools >...
Darshana,
Follow the above path...Go to Datawarehousing Workbench in QA tcode RSA1 and on the top you will see Tools > and follow from there...
Hope this helps....
Edited by: Chetanya Thanneer on Jul 14, 2008 10:15 PM -
How to find the active version of a program from table
Hi to all experts.
without using version management of a program how can we find out the active version of the program through tables . I have checked table E071 couldn't find anything there .
Thanks in advanceChk out htis link.
Table Name for Transport Requests & Program name -
"cfajaximport" Not found in currently active versions
Dear all
First I want to say I am very begginning.
My problem is when I want to use some RIA sample appliaction
(from adobe site) which is using some AJAX feature I have unknown
runtime error during data saving. I have information that "The tag
name: "cfajaximport" Not found in currently active versions. " What
is it mean and how to resolve it?
I have ColdFusion 8.0.1 (developer edition), IE6.0
Thank you in advance for helpI was about to type up a long answer on the fist thing to
check, and I
found this blog that does it all for me.
http://www.coldfusionguy.com/ColdFusion/blog/index.cfm/2007/11/13/CF8-AJAX-Features-CFIDES cripts-and-CFAjaxImport
To summarize, you need to make sure the CFIDE/scripts/ folder
is
properly accessible. You should be able to type the following
URL into
a browser, unless you have your site configured in a
non-default manner.
http://yourDomain/CFIDE/Scripts/cfform.js
I.E.
http://localhost/cfide/scripts/cfform.js
on *my* development server.
If that does not return a file, then none of the built in
ColdFusion
form or AJAX functionality is going to work. -
Copy Inactive Version to Active Version in MC78
Hi PP Gurus,
I am not able to copy the inactive version (019) to Active Version (A00) in TCode MC78, it gives the message A00 already exists.
But when i want to transport the values to Demand Mangement (thru TCode MC75) it will ask for Active Version.
Please suggest where am i doing wrong?
Thanks in Advance,
Regards
Rehman
Points will be Rewarded for a Detail Answers.Hello Rehman,
The message what you are getting is standard and warning message. It is not the error message.
While copying from inactive version to avtive version (A00), this will populate, you just have to enter omce again, then you will get one more pop-up saying "A00 will be reset", agaian you have to accept the message.
Now you check your version will be copied from MC88 transcation by clicking on active version.
If problem solves rewards your points.
Regards
TAJUDDIN -
Incorrect Workflow version after transport
Hi,
A modification was made to the standard Booking Approval workflow (WS01200151). The changes were successful and a new runtime version was generated on the development system.
There seems to be a problem with the activation of Workflows transported to the QA system. After the transport no new version were activated on the QA system although the active version was included in the transport. (landscape: Development > QA > Production). I created a new version and also transported this, but the new version were not active. The status on QA was still "Runtime version, Saved".
I checked the transport log and there were no errors and all objects were moved to the QA system. However, when I check the workflow versions on QA, there are multiple inactive versions now QA. There are only 7 on development but there are about 60 on the QA system. The 2 workflows are not in-sync.
The QA system is not open for changes and it is not ideal to open it either because then we will have to open the Production system as well. Does anyone know why the active version were not transported and how to fix this besides opening the QA system for changes?
I am quite new to workflow and your help will be much appreciated.
Regards
Liza-MarieThanks for the feedback, I learnt something new.
The version in table HRS1205 on Development is 0007 and on QA it is 0006 and I executed function module SWD_WFD_REPLICATE_FROM_9999 but nothing is updated. I debugged the FM and found that it exits (without any exception) as the transport version details (date & time) is the same as the 9999 version (code line 91).
SWD_WFD_REPLICATE_FROM_9999 reads table SWDSHEADER and in this table the last version is 0182! I don't know how all the versions from 0007 and 0182 was created but this seems to be causing problems. I don't want to write a program to delete those redundant entries as I'm not sure what the impact would be. Do you know if there is a FM to delete the entries from table SWDSHEADER or any other table that would get rid of these versions?
To answer your question, I can view the WF in PFTC, there are no messages.
I will check OSS if I can find something.
Thanks for you help, it's much appreciated.
Liza-Marie -
Regarding checking the objects versions after transporting
Hi
we are doing transportation from DEV to QAS. what we have done is
we have collected all master data objects,data sorses,transformations,dtps,process chains into different transport recquests and releases the recquests ,and imported recq in QAS.
now our recq is to check whether all master data objects,data sorses,transformations,dtps,process chains are transported or not
if transported have to check all obj are in active version or not.
at present we are follwing below procedure
a) go to se09 in DEV and select 1 recq and check the objects list under that recq then copy one obj and check in QAS,the same procedure for all objects, but we are having 100 recquests, under each recq we are having many objects.
if we follow that it wil take days,so is there any procedure to check
are there any tables where we can check fast and minimise the time.am not sure about the object status however can get list of objects in your transports from below process :
Go to table E071 and give your request numbers as input. It will give you list of all the objects contained in those requests.
Now object will be of different types , IOBJ - Infoobjects , ODSO - ODS , MPRO - Multiprovider , TRFN - Transformation etc. -
Ejblookup fails with Possibly previouly active version was already unbound.
Hi
I have an EJB deployed in EAR in one Weblogic domain (clustered) - Domain A and the the ejb is invoked by another EAR application running on different domain - Domain B. It works fine when both managed servers are running in the Domain A but if i bring down any of the managed servers in Domain A its giving the following exception in the ejb client ear application. can any one help me what does the error means ' Possibly previously active version was already unbound.'
javax.naming.NameNotFoundException: Unable to resolve 'WuiFacade'. Possibly previously active version was already unbound. [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'WuiFacade'. Possibly previously active version was already unbound.]; remaining name ''
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at weblogic.jndi.internal.ServerNamingNode_1030_WLStub.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:392)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:380)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at com.xx.xxn.business.delegate.TransactionFacadeLocator.getWuiFacade(TransactionFacadeLocator.java:83)
Thanks in advance
jesh.It looks to be a bug... please contact support, to get the patch details
https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=8176653 -
Return to Active version - Multiprovider
Hi all,
See if you can help me with this.
I have a Multiprovider that has been screwed after a transport from another system. This is in a development system, so it is open for changes. I can see the A version is ok and I like to keep it, so I was wondering if there's any way of deleting the M version or just reactivating the A version.
SAP BW 3.1 Stack 22
Thanks a lot.Yeah, that's right.
First of all, thanks for the welcome!
When I select the active version all the icons grey out.
I think I remember that I have done this with an update rule, I just switched to the A version on the selection box and then activate again. But on the Multiprovider and Cube maintenance screen seems not to let you do this!
Thanks again.
Gabriel. -
Back to active version from saved TR
Hi,
is it possible to recover the active version of a transfer rule from a bad saved version ?.
thx in advanceJuan,
As far as I know, there is no way of reverting back to a pervious active version once you saved your TR.
But, if this is a delivered TR, you might just reactivate it, but something tells me its not.
Or, if the previous active version thet you need is already transported to Q system, how about doing an XML export from that system and doing an XML import into your Dev system.
Good luck
Gova -
Hi Experts,
Is it possible to reset BW objects to active versions. For example if an infobject, or DSO or Transformations are in modified version and you decide to cancel these modification and reset to the active version instead... is it possible to do this?
Thanks in advance.
Regards,
RoseHi........
Yes..........To convert BW Objects from M version to A version...............activate them again.............then they will convert to A version...........
But u hav told.......cancel these modification...........did u mean undo the changes...........then again go to change mode..........do the changes.save and activate........
Regards,
Debjani.......
Maybe you are looking for
-
FI doc type(ex.MM doc type) not display Report FMAVCR01
Hi Experts, I have to control FMAVCR01 Report display that FI doc type(Blart type - WZ (MM doc) transfer posting is not included in the output. How to control display fi Doc type at FMAVCR01? Thanks for your answers
-
When we access Planning data form , we got this error Essbase not working. Then we login Essbase server and login Adminstration console, we could able to login the server but we couln't able to see any application. ( Can't Expand Essbase server in le
-
Uploading iPod songs to a new computer/new iTunes
I have my iTunes on my home computer with all the songs downloaded to my iPod. However, I'd like to upload all of those songs to the iTunes on my work laptop. Does anyone know if this is possible, and how its done?
-
MacBook Pro Update 2.0 on MBP15R both HDMI and internal displays go black and useless
I installed MacBook Pro Update 2.0. When I plug in an HDCP-capable HDMI monitor the MBP15R's screen promptly goes all-black and useless (except for a cursor arrow, which moves but does nothing) and the external display mirrors the same thing. (The
-
Table to see which transaction code or program is been used less
Hi, My requirement is to identify those programs or tcodes which are been used less. Is there any table where it has a record of this ... Regards-Siju