Active version of the BDoc type PRODUCT_MAT is not consistent

Hello,
We are using CRM 7.0. We tried to release change request but got an error message:
Active version of the BDoc type PRODUCT_MAT is not consistent in the table SEGM
Do you know what should we perform to resolve this problem?
Thanks in advance,
Sergey Kozyrev

Hi Sergey,
Please check the entry in table SMOG_TRANS for TR_NAME = PRODUCT_MAT.
Current active version i.e SMOACTV = X ,in SAP standard system is for,
SMOVERS = 00015      .
Also,you can try re-generating the BDoc PRODUCT_MAT once again.
Hope this helps!
Best Regards,
Shanthala Kudva.

Similar Messages

  • Bdoc type PRODUCT_MAT

    Hi Middleware experts,
    I'm clearing bdoc errors today.Can you please help me clear these two errors? Details are provided below:
    1.
    Bdoc State Description: Bdoc validation error
    Bdoc Type: PRODUCT_MAT
    Flow Context Description: mBdoc Validate
    Error message:
    GTIN xxxxxxxxxxxxxx (IT) has already been assigned
    You are not authorized to set status 'To archive'
    Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
    2.
    Bdoc State Description: Mapping error
    Bdoc Type: PRODUCT_MAT
    Flow Context Description:
    Error message:
    Category for product hierarchy xxxxxxxxxx does not exist
    Hope to hear something from you.
    Thanks and Regards,
    Mike

    Yes Mike,
    You first do the request download for one product for which the BDOC shows category related error to just see if that comes through fine. I have seen similar error in my scenario on a product category which had been in CRM from quite a long time (may be since beginning), but when I ran the request download for that product, it worked well. Similar could happen for you as well.
    If that does not work, then you run the product category download.
    BR//Santosh

  • A new version of the data type is present than one required

    Hi  Experts,
    I am getting a short dump saying "A new version of the data type is present than one required".
    The data type in my case is the Transfer structure for 2LIS_02_SCL. I am getting this short dump whenever i try to change the transfer rules.
    I tried activating and deactivating the transfer and update rules but to no avail. Kindly advice.
    Thanks in advance.

    SAP Note 1157796 resolved the issue.

  • Problem with the active version of the transfer rule ABAP program with sour

    Hi,
    I have a problem with the active version of the transfer rule ABAP program with source system EXCEL. 
    The system does not react to changes done in the transfer rule coding. For FISCPER I have hardcoded the result 'BABABA' and still the results delivered are those from the CSV.
    Resetting the system buffers does not help. The problem is systematic in combination with source system EXCEL (i.e. not only 1 InfoSource).  Checking the active program Extras->Display Program shows the coding (result='BABABA') being there, but
    as stated, the system does not produce the result BABABA, but instead the result of the CSV.
    It seems as if the original version from the very first activation of the transfer rule program remains somewhere and continues to be used.  Does anybody know how to flush it out and get the system to actually use the coding appearing as the active program.
    I have posted an OSS note, but SAP takes it time to answer and I am under time pressure so I figured that maybe one of you know who to solve it before SAP does.
    Greetings and thanks,
    Martin

    Hi martin,
    just try to go out the RSA1 and then return to your infopac. ...
    sometimes there some "cache" trouble

  • Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file

    Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file
    How do I fix this?

    That would probably be a question best taken up in on a site for Windows support questions. Not knowing anything about the movie you're trying to play, all I can suggest is to confirm that the format of the movie you wish to play is supported in your version of WMP. If it isn't, you'll either need to convert the movie or use some other player software.
    Regards.

  • How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?

    How can i upgrade my iPhoto 7.1.5 to a newer version? the download 8.02 will not work as i need 8 and that isn't available on download on the site?
    Thanks x

    You can upgrade to iPhoto '11 with OS X 10.8.5 by purchasing an iPhoto '11 DVD from Amazon, eBay or other source - or you can upgrade your OS to Mavericks for free if your system meets the requirements and then purchase the upgrade to iPhoto '11 version 9.5.x from the App store - in either case backup first in case of problems
    LN

  • The enhancement specification of structure type ekko is not consistent

    Hi all,
    While making a program that  displays status of gr /ir, excise availing and miro I got an error as "The enhancement specification of structure type ekko is not consistent".So what does it mean and how to remove it.
    Thanks
    Regards
    Navratan

    Dear Navratan,
    I have  found one thread regarding your issue.
    Please check if there any enhancement had done in your EKKO table.
    http://solveissue.com/note?id=2030146
    Thanks
    Nishant

  • I have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone,

    have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone, but I only have my one computer, how can I update all of my Apple products. I want to use them all.

    Hello graingers45,
    graingers45 wrote:
    have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone, but I only have my one computer, how can I update all of my Apple products. I want to use them all.
    What do you mean it isn't' compatible?  What isn't compatible?
    There is no limit to the number of iPods you can sync to one computer, iTunes library, or iTunes account.  Simply connect each separate iPod/iPhone to your computer and configure each to sync whatever content you wish to.
    B-rock

  • Why do different versions of the LabVIEW Run-Time Engine not compatible?

    LabVIEW Run-Time Engine to become more and more big
    Why do different versions of the LabVIEW Run-Time Engine not compatible?
    " 一天到晚游泳的鱼"
    [email protected]
    我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
    欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview
    Solved!
    Go to Solution.

    jwdz wrote:
    LabVIEW2020 ....... ，it look like?
    You need to express your ideas more clearly. We cannot fill in the blanks and read between the lines if the post has no substance.
    jwdz wrote:
    It will affect the future development of LabVIEW, right?
    What is "it"?
    There are many things that affect the future development of LabVIEW, starting with NI management, all the smart people in LabVIEW development, the economy, the LabVIEW users, etc.
    If you are worried about the increasing size of the distribution, the good news is that the cost of data storage and data transmission has dropped much more dramatically. Even though newer versions are bigger due to great and welcome new features, the improvements in infrastructure have actually made the distribution and storage significantly easier over the years and will continue to do so. Trust me!
    Nobody wants to go back to a LabVIEW version that fits on a floppy disk!
    LabVIEW Champion . Do more with less code and in less time .

  • Error 2148074306 The encryption type requested is not supported by the KDC

    Our domain is Windows 2008 Native. I ran repadmin /replsummary and noticed an odd error that I cannot get to the bottom of. Error 2148074306 The encryption type requested is not support by the KDC. This appears between two DCs only. I cannot find any reference to what might be causing this.Orange County District Attorney

    Hello,
    check this articles about:
    http://blogs.technet.com/ad/archive/2007/11/02/server-2008-and-windows-vista-encryption-better-together.aspx
    http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/9fe02655-bab9-43e4-9776-7b318b582e19
    http://blogs.technet.com/ad/archive/2007/02/23/aes-authentication-in-vista-keep-in-mind-if-you-re-testing-vista.aspxBest regards
    Meinolf Weber
    Disclaimer: This posting is provided "AS IS" with no warranties, and confers
    no rights.

  • Version management- the 'I' type (version created by import)

    Hi,
    We are in the midst of upgrade. I noticed that after the system copy, some program screens are missing in the new system. A check on the program version in the old system shows this:
    Version Cat Fla SAP Rel. Arch Request    Project
    Version(s) in the development database:         
      activ          X  700                         
    Version(s) in the version database:             
      00002  I          700       UPGRADE700        
      00001  S          40B       D01K905538        
    We are thinking to do a transport to the new system to resolve the missing screens problem. However, there is no way I can navigate to the transport request created with UPGRADE700. Does anyone know how is this being created? It has version type 'I' which means is a version created by import?
    Thanks in advance!

    Hi,
    Yes, you need to import the screen once again separately. Regarding the version Mgmt Transport indicators:
    'I' --> Imported Version
    'S' --> System Request (Before an import)
    'U' --> User Request
    Thanks,
    Shiv

  • 0MATERIAL attributes deleted from the active version of the InfoObject.

    Hello Experts ,
    As per a Business requirement , I deleted some of the system defined attributes of the 0MATERIAL charecteristics , and found the new active version of 0MATERIAL is incompatible with the SID table , Attribute and text master data table. I tried to copy the original version of 0MATERIAL from the business content  but the system is not allowing me to do so , instead it duplicated all the attribute fields twice in the 0Material and created 3 version of 0MATERIAL  "active" , "revised" and "content".
    Also one user defined attribute BW_MATN was created , and now wants to get rid of that.
    I want to revert back the original master data field (attribute and text) and other technical settings of 0MATERIAL infoobject equivalent to that in Business Content, and should have ideally one active version of 0Material "   during that process if I require to loose the current master data that is fine.
    Kindly Advise how to achieve that .
    Regards
    Deblina

    As per a Business requirement , I deleted some of the system defined attributes of the 0MATERIAL charecteristics , and found the new active version of 0MATERIAL is incompatible with the SID table , Attribute and text master data table.
    You should have created a Z infoobject by the name ZMATERIAL by using 0MATERIAL as a template and then modified it (ZMATERIAL)  .
    Also if you find any attribute of an Infoobject is of no use then instead of deleting it just leave it as it is as SAP has provided it for some reason and you never know when you need them in future .
    And yes you cannot install the business content version of 0material if there is data in the master data table .
    By the way which version of BI are you working on ?
    If you are on  BI 7.0 SP 23 or higher (BW 7.3)  then there are some new additional functionality added to delete the master data with ease .
    Refer the below URL for the same
    http://scn.sap.com/community/data-warehousing/netweaver-bw/blog/2012/01/01/bw-730-different-ways-to-delete-master-data
    Hope this helps .

  • The XSD type double does not exactly correspond to the ABAP type FLTP

    Hi Experts,
    i wanna create a proxy from a wsdl file. While creating the the proxy in SE80 i got some errors like described in the subject. I also got an error "Item is part of recursion". I have found already a post in the forum but i don't get what to do. Ok, I have to change the data type but how or where?
    Do I have to update the Web Service (which I cannot do, because I don't have access to the WS) or can I do the mapping in my Client System. But where? In SE80 I haven't seen any possibility to change the Data Type and the Data Element does not exists in the ABAP Dictionary yet because the Proxy haven't been activated.
    Thanks in advance for you reply.
    Best regards,
    Sebastian
    Edited by: Sebastian Wilhelm on Dec 21, 2011 11:43 AM

    The Problem with the recursion is solved on my own.
    In SE80 ABAP Workbench go to Utilities > Setting > Proxy Generation
    Activate Expert View in Workbench
    Go to a recursive element. A Check Box Untyped mapping appears. Activate the Check Box.
    The Type of the element will be created in DDIC as XSDANY.
    Regards,
    Sebastian
    Edited by: Sebastian Wilhelm on Dec 21, 2011 1:40 PM

  • The control type xyz is not allowed on this page. The type is not registered as safe.

    Hi all,
    I have a solution, say My.Solution, I have a project My.Project in that.In that project I have a few features.I added a visual webpart.In the properties of that, I can see that it has a safe control entry for that.I did not rename any namespace or class name.
    I just added this webpart to a new feature(which has List Definition and instance) and deployed it.The class name of the visual webpart is Foo and this is in the namespace My.Solution.Foo.
    I opened the sharepoint designer and edited the masterpage.I referenced this in masterpage as
    <%@ Register TagPrefix="cus" Namespace="My.Solution.Foo" Assembly="My.Solution, Version=1.0.0.0, Culture=neutral, PublicKeyToken=87a45275f2ea36e3" %>
    and I added this to the masterpage as
    <cus:Foo runat="server" id="customvisualwebpart"/>
    After I save in the designer and refresh the browser, I get the error,
    The control type 'My.Solution.Foo.Foo' is not allowed on this page. The type is not registered as safe.
    I checked the .webpart file and it has the namespace, My.Solution.Foo.Foo. The .spdata has a safecontrol entry too as
    <SafeControl Name="SafeControlEntry1" Assembly="$SharePoint.Project.AssemblyFullName$" Namespace="My.Solution.Foo" TypeName="*" IsSafe="true" IsSafeAgainstScript="false" />
    The assembly that contains the webpart is alread deployed to the GAC there.
    The web.config for that in C:\inetpub\wwwroot\wss\VirtualDirectories\12345 does not have a safe control entry. I don't want to add it there manualy as I don't have access to web.config in prod
    Can somebody tell me what is wrong and what I need to do to fix it?

    check you package  file 
    http://sharepoint.stackexchange.com/questions/11524/the-type-is-not-registered-as-safe-when-trying-to-add-a-web-part-installed-by
    Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

  • I have an Ipod touch 4G 32GB, and it suffered a Unconfiguring at the version of the software, and I can not restore it. I want to have the original version that is 4.3.3 - 8j2, how can I do?

    Please help me to configure my ipod, changing the version software 4.3.5 to the original 4.3.3 8J2, and I did have a problem that is the error 3194 when I want to restore It pressing shift and selecting the file Ipod4,1_4.3.3_8J2_restore.

    what do you mean with downgrading the IOS of an IDevice? I can not untherstand becouse my brother try to restore my ipod and now I have version of the software 4.3.5!!

Maybe you are looking for