Active X class not registered (Symphony II CCD)

Hi,
i try to run a labview programm from Horiba to run a Symphony II CCD.
When I try to run the programm I get a error which says Active X Class not registered (see picture).
I tried to register the used DLL but it is not working.
Do anyone has an idea what the reason could be?
The example programs (like Excel opening or Powerpoint) are working fine..
thanks a lot
Best regards,
Jim
Attachments:
Error_Labview_SymophonieII.png ‏377 KB

JimJackson wrote:
Hi,
i try to run a labview programm from Horiba to run a Symphony II CCD.
When I try to run the programm I get a error which says Active X Class not registered (see picture).
I tried to register the used DLL but it is not working.
Do anyone has an idea what the reason could be?
The example programs (like Excel opening or Powerpoint) are working fine..
thanks a lot
Best regards,
Jim
Your first step of action should have been to contact Horiba.
Don't they have instructions on how to use their software?

Similar Messages

Excel Viewer: Class not registered (error -2147221164)

Hello,
I am using the Excel examples shipped with Labview 8.21 to read from an Excel file and this works well. Now I need to do the same but on a PC that does not have Microsoft Office or Excel installed but only the free XLVIEWER (Microsoft Office Excel Viewer). When I try to change the ActiveX class of my reference to feed the 'Automation Open' vi I get the Class not registered (error -2147221164) although I can browse down to the XLVIEWER.exe and select it. Then I thought that maybe XLVIEWER had no ActiveX to communicate with other application; I thus installed a package called excelocx.exe, rebooted the PC but that did not change anything. I am still stuck with the same error.
What am I doing wrong?
Thanks a lot,
Christophe

Please find attached the VI I am using together with the XLS file that I try to read with Labview on a Pc that does not have MS Excel installed, only the XLVIEWER.
OpenOffice is not supported in our company so cannot be considered as a valid solution.
Thanks,
Christophe
Attachments:
Read Excel File with Labview 820.zip ‏31 KB

Error occured at Class not registered... Because Excel is not installed?

I received the following error while trying to run an application built with LV 7.1:
Error -2147221164 occured at Class not registered in Open_Excel.vi > Report_generation_excel_Tbeta WITH new layout.vi > Mirror_Cycling_Main tbeta-2.vi
Could this be because Excel is not yet installed on the computer? Will there be a problem if Excel is installed after the 7.1 Runtime Engine and LabVIEW drivers?
Also, should I stay away from installing higher versions of Excel than what was originally used?
Would it be possible to create a VI like this with the base version of 8.2? I'm not certain what some of the controls on the front panel are and 7.1 does not give me additional information in the help dialog- if someone could give me the names of the various components circled in red in the attached JPG I would appreciate it.
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
excel_vi.JPG ‏79 KB

I'm using excel 2003 with labview 2009 v9.0f2. I have attached the VI here. Basically, Im just using the"excel get all data.vi" to read an excel file to create an array and that's where the error occurs.
Max
Message Edited by MaxXx on 12-07-2009 10:33 AM
Attachments:
Excel Get All Data.vi ‏26 KB
Excel Get Data Specified Field.llb ‏209 KB

Class Not Registered error upon using MS Office Report

Hello,
Using LabVIEW 2010, I've just installed the Microsoft RGT trial from NI, along with the Office 2010 trial from Microsoft. Upon trying to drag the MS Office Report VI to my block diagram, the configuration dialog appears but immediately an error dialog shows up over top, with a Class Not Registered error. Attached is the screenshot. If I close the error and try to configure the VI for a basic Excel report, I get a file-not-found error in reference to the Excel template, which I have verified is indeed at the target path and opens with my version of Excel just fine. Any ideas how to get past this error?
Attachments:
error.JPG ‏42 KB

Hello,
It sounds like you have to reinstall the RGT. Have a look at this documentation.
http://digital.ni.com/public.nsf/allkb/B7F980D169474D568625760E0055D55E
Eric
Eric Liauw
AE Specialist - Automated Test | CLD | CTD
National Instruments

I Get an error every time I try to update Windows 8.1 or update Defender (EXE On top "Class not Registered")

I think my lap top has a lot more problems, then the sun has Hot spots! :)
(not that I am down playing any one's situation, nor want to sound cynical or Condescending).
Though many of my issues have been resolved through a LOT of time, tech support and a couple friends and personal researching.
But I get the "Class not Registered" Every time I try to update Windows,
(I have Mozilla Firefox 30 and Windows 8.1)
On Top of small Error box, I get EXE..on top. But Inside the error box "Class not Registered"
Some of the other issues or problems were self inflicted by not researching properly, so to say the least I am being extremely cautious.
I have the same issue with Class not Registered, and looking for some ideas or hopefully the solution.
After I try running a windows update and any updates for my virus scan "Defender" which is what I believe windows 8 and 8.1 uses, I am not sure about Vista or Windows 7 have, I never used them.
I went right to 8 through a new lap top. Then I got Windows 8.1 (that was about a month ago)
But if anyone does find or even know an answer please reply as soon as you are able, anyone else who may just be reading, if someone gets anything that did work for them, Please Let me know.
Due to time I couldn't read through more Forum suggestions or links that may work for
My Error EXE. "Class Not Registered" :)
BUT will return later in day. Maybe anything I found an answer for I can pass on. i Have had plenty issues since I had a type of crash (Or whatever it was when I was online with a Tech from Microsoft and and he had it so both of us could control the Arrow cursor, I double checked phone number for MS and it checked out legit,
That was the beginning of many days of constant repairing That was back around July 6th 2014 Thanks to everyone who even just reads this, BuddyD

This is might because of your prior change in softwares. so first you have to do run '''sfc''' in run command. and then you see the specific problem which causes this . Since System File Checker (sfc) scan will make Windows replace corrupt or missing system files on your computer.
* Click Start>All Programs>Accessories>right-click Command Prompt, and select Run as Administrator.
* Click Continue or supply Administrator credentials if prompted.
* In the Command Prompt window type the following, and press Enter:
sfc /scannow
Refer this KB article for more information:
http://support.microsoft.com/kb/929833
See this is not a problem of firefox till now. You can check more with microsoft answers site.

Class not registered

HD-4310 Webcam software.
When installing I get this error message:
" Class not registered " (without speech marks)
I followed a tip to use " sfc /VERIFYONLY " to scan for a permissions problem but my system comes up clean.
Can anyone help?
Much appreciated

Thanks for the expansive reply. I must say, I disagree with your statement: “As I said, it was a problem with the HP Webcam installation, not Windows Explorer. It's a good job I didn't take your suggestion for a solution in the first link and act on it.” I am going to provide an elaborate explanation as to why I disagree with this statement.
Firstly, I'm going to provide you with the most significant troubleshooting steps from the first link I provided (link is http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/explorerexe-class-not-registe...
“Hello,
I would suggest the following support steps....
-Load into Safemode and verify if you are able to access your desktop
-Create an alternate user account and verify if you are experiencing this issue.
-System Restore your computer to a previosu date and time when it was functioning normally.
-SFC /scannow
-Perform a repair Installation of Windows. (Universal steps are listed below)
Please proceed with performing a repair installation of the OS. In case of a failure, please ensure that you back up your data to an external location prior to performing the repair. Below are the steps to proceed with the repair process.”
I will cut the quote at this point. Now, I have worked, researched, and experimented with software on Windows since 2000. Running the computer in Safe Mode is always a troubleshooting step. The part about accessing the desktop may not apply, however, running in Safe Mode is crucial and helpful. I cannot describe how vital it is in certain types of troubleshooting. Creating a new user account and attempting to perform the same mission can potentially repair all “Class not register” errors, not just specific errors. Of course, this will point to an issue on your primary account. The system file checker scan is always valid, because you never know what it will detect, which can be significant. A System Restore may or may not work, depending if the software did work at a certain point. Finally, a repair installation of Windows, while it is a monumental task, is a troubleshooting step.
Secondly, I noticed the Operating System that is subjected on the thread is Windows Vista. I informed you that I would require you to inform me of your operating system, and model number, so I can assist you further. However, the funny factor about the more recent Windows operating systems is that troubleshooting is extremely similar on all operating systems. I provided the best thread I could, without knowledge of your operating system, since the troubleshooting provided applied to Windows 7 as well.
Thirdly, I'm going to quote your statement, then provide my response:
“The better advice would have been to let me know how to find the Problems and Solutions in the Action Centre and get some more information before a complete repair of my entire OS. I can't remember how I found out now, but I couldn't find them there and took a tip to type the name "problem reports" into the search bar of the start menu and click on "view all problem reports”.”
While this troubleshooting is valid, my style of troubleshooting enables this troubleshooting step to only be performed on special occasions. This issue was not one where I would've elected to perform this task. My troubleshooting I provided would've narrowed down the issue, ultimately, if it wasn't resolved. Even if I had to troubleshoot this issue from scratch, I would not perform this task.
I worked on behalf of HP.

Class not registered in dashboard designer?

Hi,
I am new to SAP and this forum as well kindly apologize for my mistakes and silly questions...
I have installed SAP Dashboard design version: 6.0.0.0 Build: 14,0,2,364 on my windows XP system which have already BO client version : 14.0.3 Build 613.
after the installation when i tried to add query from dashboard designer it is giving an error "class not registered" but i have already registered with the product code given to me, while logging on business objects enterprise through dashboard designer the authentication drop down is not showing any thing and i am unable to log on to access any universe.
My BI launch pad and webi rich client is working fine but the issue is with the dashboard designer.
PLEASE HELP!!!

Hi,
Please go through the below Note.
1627640 'class not registered' error in Xcelsius when creating an SAP BW connection
Also try to check with the admin team & and install the correct Service Pack based on the PAM.
SAP BusinessObjects Dashboards 4.0, SAP Crystal Dashboard Design 2011, SAP Crystal Presentation Design 2011 - Product Av…
Xcelsius 2008 Service Pack 5 - Supported Platforms
Hope this helps.
Regards,
Suman T

Getting a "Class not registered" error in VC++

I'm after a bit of advice concerning a system that I'm
supporting. The system is an Oracle 7.3.4 DB with Oracle
Objects for Ole v2.2, and the Microsoft ODBC driver for Oracle,
with the application consisting of a VB(ODBC) frontend and a
VC++ DLL(OO4O) backend.
The client has reported that one of the sites the software is
installed at is generating the error "Specified Class not
registered in Registry". I've narrowed this down to an OO4O
call in the VC++ DLL, which does a simple select statement, it
seems to be able to make the database connection and then
crashes, however I've been unable to duplicate it in the
development environment.
No other sites have reported this problem, so I'm assuming that
the OO40 installation has become corrupted. Has anyone else
experienced similar problems and can offer advice or solutions
to getting it working, and how I can reproduce the problem in
the development environment.
Thanks
Andrew

Andrew,
May be the name 'Oracle Objects' does not clearly reflect it
being the forum for Oracle's Object-Relational Technology. There
is a separate forum for OO4O (Oracle Objects for OLE).
Regards,
Geoff
Just to let everyone know, I've managed to duplicate the problem
on a development PC and come up with a fix, which I modified
from a similar fix I found for Oracle 8i. The fix is to
reregister OIP22.dll which is the inprocess server for Oracle
Objects, and to run Oo4oParm.reg and Oraipsrv.reg which restore
any missing entries in the registry. I've sent the client the
steps to follow, and hopefully this should cure the PC.
Andrew

Class Not Registered error when opening COM+ Applications folder

Hi,
This question was originally posted in the Microsoft Community / Win 7 forum, but I was asked to post it here.
As you can see below, I'm getting Error Code 80040154 - Class Not Registered when clicking on COM+ in Component services.
...picture 1 coming / Account verification
I took a look at the event logs but couldn't glean much information from them.
I also have issues associated with MSInstallVSSProvider when Uninstalling / Installing Norton Ghost 15. Not sure if they are related or not.
Below are the errors I get when Installing Norton Ghost 15. This app had been loaded on the PC earlier with no problems whatsoever. A few months later when launching the app, I got several error messages. Couldn't resolve them so I thought I would uninstall
/ reinstall. That's when I started seeing the MSInstall errors, which lead me to the Component Services area.
...picture 2 coming
...picture 3 coming
...picture 3 coming
I suspect a registry cleaner (GlarySoft) is the culprit here. My mistake was not backing up the registry before running the scan. This won't happen again.
Thanks,
Tracy

Hi,
In the event error, can you read what {GUID} encounters the error message? Please also let us know the full error message.
Based on my search, this issue can be caused by the incorrect registry permission settings.
Please launch Registry Editor and navigate to HKEY_CLASSES_ROOT\CLSID\{GUID} to verify the permission settings.
If it does not work, you may run Process Monitor to check what process encounters this error.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Here is the related blog for your reference:
How to troubleshoot the “Red Arrow” issue in Component Services ( I )
http://blogs.msdn.com/b/asiatech/archive/2010/02/22/how-to-troubleshoot-the-red-arrow-issue-in-component-services.aspx
Kate Li
TechNet Community Support

AxInterop.AcroPDFLib.dll throws "Class not registered" error on 64 bit OS

I have an vb.net application which uses AxInterop.AcroPDFLib.dll to open PDF files. The application works fine on a 32 bit operating system. But when the same application is accessed from a 64 bit Operatiog system, it throws error "Class not Registered".
Am i supposed to use different version of AcroPDFLib.dll for 64 bit OS.
I have Acrobat reader 9.1 installed on 64 bit OS machine. Is there any newer version of SDK/dll which will fix ths problem.
Please let me know solution for this problem.
Thanks in advance.

I am pretty sure if you compile your client application as x86 itwill work fine....you are probably compiling it with the configuration set to AnyCPU. The application loads up as 64bit or 32bit depending on the OS when set to AnyCPU. You want to force it to load as 32bit by compiling as x86. That way the app runs under WOW and loads the AcroPDFLib correctly.
Hope this helps

"Class not register" when creating in FM client

Hi,
I'm a newbie in FM application. I'm trying to install HFM and i guess it installed successfully without error. But when i'm trying to create a new application via FM client, i always got a msg box error "Class not register". Is there anyone knows this ? Profile was successfully created. Also, in workspace, i can see link Consolidation Administration, but there is no extended link, such as Create Application. Is there something wrong with the FM configuration ? I back and forth configure the HFM and workspace for a couple of times, and not to mention uninstall and re-install it again. but still couldn't find why. Please help. Thanks.

Hi again,
I tried to re-install the FM Application Server. Then I re-configure FM and workspace, and try to create an application through FM Client. This time, the error given was "You do not have the proper access rights to perform this task". I've checked in Shared Service and the login that I'm using now is perfectly provisioned with Administrator, Application Creator and Dimension Creator. I even tried to deprovisioned with Application Creator and provisioned again with Application Creator. I still got the same message error.
In fact, I re-installed FM (except the EPM), configuring and still got the same error. Is there anything I set wrongly? Please help. Thanks.

Samples not working: class not registered

P.S. here, while I am writing, for I don't know what reason, it seems that after I press Enter at the end of the line, all the text goes below and thus, my first line became last, and my last phrase (this) became first. I only hope it's a problem only here, not at the display as well.
CAN ANYBODY PLEASE TELL ME WHAT TO DO??
When I try CoCreateInstance, for instance, I always receive errors "class not registered".
I have tried the basic samples, but it seems that it cannot register the CLSIDs (CLSIDFromProgID: there is no ProgID "AcroExch.AVDoc" in windows registry, for instance! and the CLSIDs I have gotten from the type lib (AcroRd32.dll) seem not to exist in the windows registry.
I have downloaded the acrobat reader sdk because I needed to use some classes like CAcroAVDoc.
hi!

Have you looked into iFilter? Here is a quote from the 64bit iFilter page (
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4025):
Adobe currently bundles a 32-bit PDF iFilter with Adobe Acrobat® 9 as well
as free Adobe Reader® 9 software. It uses the Microsoft iFilter interface
and allows third-party indexing tools to extract text from Adobe PDF files.
Karl Heinz Kremer
PDF Acrobatics Without a Net
[email protected]
http://www.khkonsulting.com

AutomationException: Class not registered

CoreAPI is defined in "My Computer\HKEY_CLASSES_ROOT"
"My Computer\HKEY_CLASSES_ROOT\CLSID" also has a valid value.
Any ideas why the following exception is raised? Thanks
AutomationException: 0x80040154 - Class not registered
at com.bea.jcom.bm.b(bm.java)
at com.bea.jcom.Rpc.a(Rpc.java)
at com.bea.jcom.bf.a(bf.java)
at com.bea.jcom.Dispatch.createDispatch(Dispatch.java)
at com.bea.jcom.Dispatch.<init>(Dispatch.java)
at test.coreapi.ICoreAPIProxy.<init>(ICoreAPIProxy.java:34)
at test.coreapi.CoreAPI.<init>(CoreAPI.java:110)
at test.coreapi.CoreAPI.<init>(CoreAPI.java:82)
at test.coreapi.CoreApiTest.main(CoreApiTest.java:25)

Damon is right,
Do setdllhost and configure this DLL' default authentication to CONNECT and for
this class, select run as Interactive User in identity pane. Also Make sure..
Enable DCOM on this computer is setup.
Thanks
Sathish
"Damon Hon" <[email protected]> wrote:
hello,
Is your class hosted inside a dll? This exception is thrown because
only
executables
can be accessed via DCOM. You must first configure a surrogate executable
that
will be used to access the DLL. You can do this with the setdllhost
tool
that comes with JCOM.
setdllhost c:\mydirectoryto\mydll.DLL "My Class"
damon
"test" <[email protected]> wrote in message
news:3c3dd1ff$[email protected]..
CoreAPI is defined in "My Computer\HKEY_CLASSES_ROOT"
"My Computer\HKEY_CLASSES_ROOT\CLSID" also has a valid value.
Any ideas why the following exception is raised? Thanks
AutomationException: 0x80040154 - Class not registered
at com.bea.jcom.bm.b(bm.java)
at com.bea.jcom.Rpc.a(Rpc.java)
at com.bea.jcom.bf.a(bf.java)
at com.bea.jcom.Dispatch.createDispatch(Dispatch.java)
at com.bea.jcom.Dispatch.<init>(Dispatch.java)
at test.coreapi.ICoreAPIProxy.<init>(ICoreAPIProxy.java:34)
at test.coreapi.CoreAPI.<init>(CoreAPI.java:110)
at test.coreapi.CoreAPI.<init>(CoreAPI.java:82)
at test.coreapi.CoreApiTest.main(CoreApiTest.java:25)

80040154 - Class not registered

Hi people
I have a page in asp.net using DIAPI and when I try to connect to SAP the following error appears.
80040154 - Class not registered.
Have reinstalled the client and registered the DLL did not work

Hi,
Have you searched the forum?
Check this first: Error 80040154:Unable to connect to DIAPI
Thanks,
Gordon

JCOM - class not registered exception

Has anybody used JCOM successfully?
I'm trying to access a COM component from a java client using JCOM.
Component is registered locally (I can succesfully access it via other
clients). I created the Java wrapper classes with the com2java tool, but
when I try to use them, I get AutomationException - class not registered
error. CLSID in the generated wrapper class seems correct. Any ideas?
Thanks,
Levent

Hi Levent,
I don't think that the EJB discussion area is the best place for you to get
answers to this question. Maybe "tools" or "environment".
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"Levent Sezer" <[email protected]> wrote in message
news:[email protected]..
Has anybody used JCOM successfully?
I'm trying to access a COM component from a java client using JCOM.
Component is registered locally (I can succesfully access it via other
clients). I created the Java wrapper classes with the com2java tool, but
when I try to use them, I get AutomationException - class not registered
error. CLSID in the generated wrapper class seems correct. Any ideas?
Thanks,
Levent

Active X class not registered (Symphony II CCD)

Similar Messages

Maybe you are looking for