Active X Control is in sysWOW64, AND System 32. I NEED IT DELETED from System 32.

I'm on an Acer laptop, with a 1.9gHz Intel Celeron. I'm running Windows 7 HP. I use IE11 AND Firefox32 both, all of the time. Flash15_0_0_152 was installed in sysWOW64/Macromed/Flash, for exclusive use in the 64 bit Internet Explorer, but the 15_0_0_152.ocx file, (Active X Control), also installed into System 32/Macromed/Flash folder, where I need to install the Flash "plugin for all other browsers", i.e., the Firefox 32 bit browser.
I don't think having the Active X Control in System 32 will allow Flash Player to operate properly, ( in Firefox ). With that said, how do I delete the file from System 32, so as to proceed with the FP "plugin for all other browsers" install?
@m_vargas
@Pat Willener

Maria,
I hate to sound dumb, like some kind of "smarty pants', but I DON'T exactly have this squared away.
I installed the Active X Flash while in Internet Explorer. Your post says that the browser knows the folder location, and Flash will install to that correct location. If System32 is the 64 bit location, and we know that Flash for IE is 64 bit, then why are my Active X Flash files in sysWOW64, ( the 32 bit location?)
I am by no means, trying to be rude, in ANY WAY, so PLEASE do not take ANY of my comments that way, PLEASE. I have grown rather tired of dealing with these Flash issues, ( for over a YEAR ), so I am just going to throw caution to the wind, and try, (RIGHT NOW ), to install the Flash plugin, and see what happens. I'll post my results ASAP.
My playback issues are: (1): I must refresh some sites 4 or 5 times, before I FINALLY "get lucky", and get Flash to playback video(s). Sometimes, it matters not, and those sites absolutely refuse to allow Flash to work properly there. (2): Some sites just will not allow playback at all...period.
(3): I suppose the following has a lot to do with my Internet speed, ( I've tested my DSL speed, and, apparently, it is rather slow ), but, for at least half of the time, all that happens when I am playing back a video, is buffering, buffering, etc. I usually get fed up with it, and exit the screen. Sometimes, under this particular scenario, I will give the video in question a second attempt, but, more often than not, it still will not work, and I'll give up, exiting that screen.
I need to point out that the largest percentage of these problems were occurring before I uninstalled, and re-installed Flash (Active X ), for IE. As I said a few sentences ago, I have yet to re-install the Flash plugin, but am about to do so. More later.
Again, thank you for your patience, politeness, and diligence.
Tommy

Similar Messages

HP 6500 need to delete from my Macs - iMac and Macbook Air

HP 6500 need to delete from my Macs - iMac and Macbook Air, I gave up on this one that I exchanged 3 times! So how do I get the item out of my systems?

Hi @Noni1948 , and welcome to the HP Forums.
I understand that you want to remove the printer software. I would like to assist.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
I would also recommend resetting your print system:
How to reset the printing system
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HT204053 My wife and I have an iphone each using one apple id. How do we stop items being deleted from one phone and then find it has been deleted from the other?

My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
Also this works when one of us downloads an app it appears on the other iphone

You need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item.

How do I download all my photos onto an external hard drive intact without loosing iPhoto's features, important info and details? I need to delete pictures and files to make room in My mac's memory which is currently full.

Hi
How do I download all my photos onto an external hard drive intact without loosing iPhoto's features, important info and details? I need to delete pictures and files to make room in My mac's memory which is currently full.
Maro

So you want to move the iPhoto Library?
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Re: camera connection kit- I uploaded pictures using the sandisk connection, clicked on 10 pics to delete and ALL of my files were deleted from the sandisk! Is there any way to recover these pics?

Re: camera connection kit- I uploaded pictures using the sandisk connection, clicked on 10 pics to delete and ALL of my files were deleted from the sandisk! Is there any way to recover these pics?

Kevin-
You say you uploaded the pictures to the iPad? Then they should still be there, and you can copy them to your computer through iTunes.
There are utility programs for a computer that can recover deleted files from hard drives, and they may work for camera memory cards as well. I've used DiskWarrior for Macintosh to recover pictures from an SD card before.
Fred

Need new Windows 8.1 activation key after hard drive replacement and system recovery

I am new to this board but a very long time ThinkPad user.
Bought a new T540p and the hard drive failed within five days of receipt; Lenovo sent me a new drive, recovery disks, machine is fully restored. With a new hard drive, the machine's "finger print" no longer matches the original Microsoft OEM activation. I have been on the phone with Lenovo six times and they promise to send me a new activation code, they have transferred me to Microsoft twice (they actually tried to help but concluded it was an OEM copy so they couldn't do anything). Still no activation code and I really can't finish building out this machine. Short of sending the machine back to Lenovo, is there a way to legimately get this valid OEM license activated? How do you get a new activation code from Lenovo? I was transferred back and forth between hardware and software support three times. I searched the forum but did not see this problem exactly.
Thank you for you help.

@2014anonon...
Good day and welcome to the community.
On an outside chance of an embedded key / recovery dvd version (pro vs std) mismatch, please have a look at the first screen of your UEFI / BIOS. What value do you see listed as the Preinstalled OS License? Whether it's defined as Std or Pro in UEFI / BIOS, it should match the type of W8 Genuine sticker on the bottom of your machine. Then check the labeling of the recovery DVDs you received from Lenovo to compare.
Please let us know what you find.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Apple store wiped HD and reinstalled Software. Need address book from corrupted files on Time Machine. How to get?, Apple store wiped HD and reinstalled Software. Need address book from corrupted files on Time Machine. How to get?

Had corrupted (?) files and Genius Bar wiped HD and reinstalled all software. Need my address book from Time Machine, but cannot allow whole time machine to get to my HD as the corrupted files are on it also.
They wiped HD 2 days ago and I came home and plugged in TM and immediately had corruption again, so had to return to Store for a 2nd erasure. Now can't locate my Address book on TM.
quilterlynn

bump

HT200274 Most of my contacts are not available. I see numbers in favorites and recent calls. Most are deleted from contact log but some are still there. I can type in the name and it brings it up. How do I restore phone.

Most of my contacts are gone. My favorites and call log show numbers but no names. It did not remove all contacts but most of them. I can type in the name and it comes up but is it not listed in my contacts.

Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

How to save contacts and messages if i need to restore from factory settings?

so after a hectic 2 hour talk with apple and i message not working, we figured out that my restore from my backup was the problem and we needed to restore the phone back to factory settings. so how do i save the important things like contacts and messages and return them to the phone?? i dont want to use iclouds i prefer backup on a computer. please help

use icloud to back it up go into setting then icloud scroll down and make sure you back it up or plug it up to your comp and click backup when itunes pops up

Do client's and server's JVM need to be from same vendor?

Hi,
1) Is a reference to object in the server valid in client if a different vendord JVM is used?
Each JVM vendor implements references in a different way.
Say client's JVM is Microsoft and Server's is SUN
in such a situation will a remote reference be interpreted correctly in client's JVM?
2) What are contents of a object-reference?
I know that it depends on implementation.
How does sun do?
are both declared datatypes and runtime type of references stored?
If so where?
An object has both data and methods(class instance)
Therefore will it have 1 ptr to where data is stored
and one pointer to class instance for access to methods
Then where are decalared and defined reference types stored

No they do not. See, the JVM is nothing more than a specification, like CORBA. What is an implementation of CORBA? an orb, right? You can be sure that every ORB out there implements the full spec of corba......they do so differently, but they MUST do so. The same with JVMs. They're impl style can be different, but they MUST fulfill all the specs of what is called the JVM.

I lost my ipad and find my ipad apps was deleted from my ipad

Help if I can find my ipad since I can't find ...find my ipad on my icloud it only shows find my iphone ...and I suspect may be find my ipad apps was deleted before I lost my ipad

The Find My iPad app has nothing to do with actually finding your iPad. It is an app that works like the iCloud version - to locate your iPad if lost or stolen. Remember that in order for Find my iPad to work, your device must be connected to the Internet via WiFi or cellular. If the device is offline, you will not be able to locate it. Find My iPad does retain it's last know location for a short time, but if that time is expired, it will appear as offline and no location will be available. This is of course assuming you did actually activate Find My iPad. If not, there is no way to track it anyway.
If you were using iOS 7 even if they wipe the iPad, they will not be able to activate it. Not helpful to you now I know, but if you don't get it back you know they can't use it anyway.

My apps won't open and it says I need to delete photos or videos

I don't even have any photos or videos on my iPod Touch anymore. So, I'm a little stuck.

OK, I've been doing a fair bit of that, but no improvement. Also, it says under About that I have one video. I don't think that's right unless it's hidden somewhere. It's not in Camera. Where might I look? Thanks for your help.

AcroPdf Active X control with Reader 9.0

Hi Guys,
We have been developing a Windows .NET based solution that displays PDF files. We have been using the AcroPDF.dll active X component which further launches the AcroRd32.exe.
Observations:
1. Upon installation of Reader 9.0, we no longer see the AcroRd32.exe in the task manager.
2. When we exit the application, we see an error message "Cannot read the memory at ...."
Questions:
1. Do we need a newer version of the Active X control? If yes, Where do we get this new version from?
2. How has Adobe addressed issues of memory management in Reader 9.0?

I just found the solution at the following link:
http://stackoverflow.com/questions/1...sing-problem-c It uses the following code:
    [System.Runtime.InteropServices.DllImport("ole32.dll")]
    static extern void CoFreeUnusedLibraries();
    private void Form2_FormClosing(object sender, FormClosingEventArgs e)
        if (axAcroPDF1 != null)
            axAcroPDF1.Dispose();
            System.Windows.Forms.Application.DoEvents();
            CoFreeUnusedLibraries();
I used it, and found no errors :-)

How to insert an Active X control in a ABAP form

Hi All,
I am learner, want to embed an Active X control in ABAP form, and how can i communicate from Active X control to ABAP form. if you refer screen shots it will be great.
Thanks & Regards
Chandra

check this weblog.
<a href="https://weblogs.sdn.sap.com/pub/wlg/995">Using Classic ActiveX Controls in the ABAP Control Framework</a>
In future kindly post ABAP related questions in ABAP forum.
Raja

Deadlock when deleting from rsstatmanpsa during DSO activation

We are experiencing intermittent Oracle deadlocks during DSO activation in our BI system. The deadlocks occur when the following SQL statement is executed:
      delete from rsstatmanpsa where
             partnr >= l_s_status-rnr_sid and
             psa     = l_s_status-dta.
This is at line 83 of the SET STATUS method of class CL_RSSM_STATMAN. (See below for runtime error details.)
When these errors occur the background job for the DSO activation is cancelled with the message ABAP/4 processor: DBIF_RSQL_SQL_ERROR. Strangely, when this occurs as part of a process chain, the status of the process variant does not get updated until/unless someone displays the process chain log, at which point the status changes and follow-on events are triggered. In other words, the process chain does not seem to be receiving word that the DSO activation process has abended, so we do not receive alerts that a problem has occurred.
Has anyone else experienced this issue?
Thanks,
Bob
P.S. We are running BI 7.0, Patch Level 15 on Oracle 10.2.0.4.0
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "SET_STATUS" "(METHOD)", nor was it propagated by a RAISING clause.
How to correct the error
Database error text........: "ORA-00060: deadlock detected while waiting for
resource"
Internal call code.........: "[RSQL/DELE/RSSTATMANPSA ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"CL_RSSM_STATMAN===============CP" or "CL_RSSM_STATMAN===============CM008"
"SET_STATUS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SET_STATUS" "(METHOD)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Information on where terminated
Termination occurred in the ABAP program "CL_RSSM_STATMAN===============CP" -
in "SET_STATUS".
The main program was "RSPROCESS ".
In the source code you have the termination point in line 83
of the (Include) program "CL_RSSM_STATMAN===============CM008".
The program "CL_RSSM_STATMAN===============CP" was started as a background job.
Job Name....... "BI_PROCESS_ODSACTIVAT"
Job Initiator.. "ALEREMOTE"
Job Number..... 05302800
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "SET_STATUS" "(METHOD)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "CL_RSSM_STATMAN===============CP "; its source
code begins in line
1 of the (Include program "CL_RSSM_STATMAN===============CM008 ".
Source Code Extract
Line
SourceCde
53
if i_with_internal_check is initial.
54
l_s_status = i_s_status.
55
call function 'RSSM_GET_TIME'
56
importing
57
e_timestamps = l_s_status-ts_last_changed.
58
if l_s_status-ts_proc_started <= '10000101000000'.
59
l_s_status-ts_proc_started = l_s_status-ts_last_changed.
60
endif.
61
if l_s_status_exist is initial.
62
insert rsstatmanstatus from l_s_status.
63
if sy-subrc <> 0.
64
message x000.
65
endif.
66
else.
67
modify rsstatmanstatus from l_s_status.
68
if sy-subrc <> 0.
69
message x000.
70
endif.
71
endif.
72
delete from rsstatmanpart where
73
rnr      = l_s_status-rnr and
74
dta      = l_s_status-dta and
75
dta_type = l_s_status-dta_type.
76
select single * from rsstatmanpsa into l_s_psa where
77
rnr      = l_s_status-rnr and
78
psa      = l_s_status-dta.
79
if sy-subrc = 0.
80
delete from rsmdatastate_psa where
81
psa = l_s_status-dta and
82
type = l_s_status-dta_type.
>>>>>
delete from rsstatmanpsa where
84
partnr >= l_s_status-rnr_sid and
85
psa     = l_s_status-dta.
86
else.
87
select single * from rsmdatastate_psa into l_ds_psa where
88
psa = l_s_status-dta and
89
type = l_s_status-dta_type.
90
if sy-subrc = 0 and l_ds_psa-sid_checked > l_s_status-rnr_sid.
91
delete from rsmdatastate_psa where
92
psa = l_s_status-dta and
93
type = l_s_status-dta_type.
94
delete from rsstatmanpsa where
95
partnr >= l_s_status-rnr_sid and
96
psa     = l_s_status-dta.
97
endif.
98
endif.
99
if i_with_commit = 'X'.
100
call function 'DB_COMMIT'.
101
endif.
102
endif.

Walter,
Thanks for the suggestion. This is the same recommendation I just received from SAP.
We are currently in the midst of regression testing for a major release, so cannot implement these corrections immediately. I'll post again after we implement the corrections and let you know if they solve our problem.
Thanks again.
Bob

Active X Control is in sysWOW64, AND System 32. I NEED IT DELETED from System 32.

Similar Messages

Maybe you are looking for