Active X or appropriate Webcam software

This questions seems to have been visited a while ago without a resolution. I am checking whether developments have taken place since.
I am attempting to view feed from a web cam via a router. The system works perfectly well via a windows machine. It uses Active X.
However on the mac, I haven't been able to find a solution as there is no active x available. I don't know if there is another software available that can substitiute for active x. I have tried to run url through Quicktime and VLC without success.
Thanks for your assistance.
Message was edited by: kap_australia

Hi Anthony
Apple does not support Active X though.
For clarification, ActiveX is Microsoft proprietary software unavailable to the Mac platform It was Microsoft's decision to preclude the Mac OS from accessing content.
With regard to your question, this thread implies Mac OK/Windows not. Perhaps you'll find something at that thread to answer your question.

Similar Messages

  • No Webcam software on my All-In-One

    Hi I purchased a customizable all-in-one machine a couple of years back. The model # is HP Omni 200 5480 quad. It has a webcam built into the monitor. However, there is no webcam software to adjust the brightness, contrast, and so on. When I called HP, they told me it was because the machine was custom built. I'm not sure I understand the reasoning there but I need to download the appropriate software so I can adjust my webcam settings. Please send me the link to download the software.
    Thank you! 

    Hi,
    Since it's a CTO machine, very hard to know which one is on your machine. Please try the following software:
       ftp://ftp.hp.com/pub/softpaq/sp45501-46000/sp45692.exe
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Tutorial: Azure Active Directory integration with Igloo Software

    Click reply and tell us what you think:
    Tutorial: Azure Active Directory integration with Igloo Software
    Markus Vilcinskas, Knowledge Engineer, Microsoft Corporation

    Hello
    Can you be little clear, what you have tested with Airwatch MDM cloud?.. which scenarios?.. 
    1) Device Enrollment ?
    2) Access to Airwatch console?
    3) Access to Airwatch self service portal?
    By following the steps We do not get it working at all. by the way some of the steps in this tutorial are unclear and outdated;  
    I finally personally figured out how things should look like, and  make it work but only with Device Enrollment scenarios from the mobile devices itself. not from the pc and browsers or from the Access panel.

  • Looking for DELL Webcam Central software and the webcam software updates

    My laptop is DELL XPSM1530. I read that the webcam was made by Creative Technology.
    Recently, I read in DELL.com that there is a software named DELL Webcam Central.
    It was said that it can improve the camera performance.
    I have looked for it in DELL.com but I did not found it and I also have looked it here but I got nothing.
    Where can I get it? Is it the same as Webcam Manager / Webcam Central that has been installed in my laptop here?
    And if it the same, where can I have the software updates?
    Thank you.

    Hi,
    You will stand a better chance getting in touch with Dell, the download site here does not offer the mentioned webcam software.

  • Can creative webcam software be used with other cameras?

    i have numerous cameras on my network several creative labs and several non-creative labs (generic).
    Can the Creative labs webcam software be used on these other generic cameras ?

    Creative Webcam software can only be used with Creative Webcams. =(

  • What webcam software is available?

    I got my webcam on my T61 widescreen working just fine but there appears to be no webcam management software - just the driver.  That said, can anyone recommend a webcam software similar to logitech's various applications that lets me record video and the like?
    Thanks in advance!   :-)
    T61_Wide | Model No. 7662 - CTO
    Core 2 Duo T7250 | 2GB OCZ DDR2-800
    82566MM Gigabit | 4965AGN Centrino Pro

    The camera can't be used as a webcam. Found it on one of the FAQ pages.

  • Bison webcam software

    Hi , strange as it be , I am trying to find BISON who make webcams and software for Acer built in cameras ..can anyone help me on this please?  Acer cannot believe it or not !!!
    Paul

    Hi Comere,
    I understand you are having issues with your webcam, specifically, locating the proper software. Looking at the specs for your model number, it looks like your computer came with Windows 7. Take a look at the following document: Webcam Troubleshooting (Windows 7). The "Can't find the webcam or webcam software" section might be of particular use to you. Please let me know your results, and if the information is unhelpful for whatever reason, please let me know, and I will try to assist you further. Best of luck to you.
    Ryan1216
    I work on behalf of HP
    The advice and opinions given here are my own and not those of HP

  • Developing WebCam Software

    Please will anyone help direct me to get information on developing webcam software in jdk1.4.
    Are they any good web site out there, Or tutorial for development of webcam software.
    Thank you in advances =)
    email address: [email protected]

    http://www.firefighterscalendar.org/campict/campict.html

  • Looking for some stable Webcam software

    Also when I try to toggle to Manycam, it doesn't appear, I have to click on the icon on my dock to make it appear.
    Also, when I try to write a text in the Manycam, if I try to write in the midst of an existing text, it moves the cursor to the end of the text.
    My CamTwist gets error so much and every time I restart it all the settings reset so I have to add all that pictures again etc. Is there a better software that doesn't get much error? Also at one time my CamTwist iTunes function worked when I chose the Screenflick Audio option in my Mic setting but now it doesn't. Solution?
    Is there any more stable webcam software than Manycam or CamTwist?

    You are having issues with third party software. Contact the respective developers.

  • Need webcam software for MINI 110-3138 tu

    My HP webcam software has been removed from my 110-3180 TU. Do you have a free download to allow me to use the webcam?
    Thank you
    Martin 

    Hi:
    See if this software will work for you...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117932-1&cc=us&dlc=en&lc=en...

  • Finding webcam software in X200 ThinkPad

    Hi
    I am looking for webcam software in my X200 ThinkPad laptop, Windows 7 Home Premium SP 1, 32 bit, with docking station. 
    After an extensive search I found one Notepad file: dshowext.inf
    :stub inf file to preserve lagacy driver compatibility. The DDK
    sample inf file for
    ; USB webcams (Intel YC76) use to refer to this file (dshowext .inf
    THere are a few more lines I can include if it helps.  If I need to download something new I would also like to know that.
    Thanks!
    summercamp

    I am not sure, but did you already tried to find a separate driver for that webcam? Must not be a original toshiba driver, since I think they use their software as a "kind" of driver or as a hardware access application.
    If you can find out which hardware this webcam is (mostly say its a chicony) then you will have luck and can make the cam available for your whole system.
    Greets

  • HD 2300 webcam - software not working

    I'm trying to use my webcam through Facebook video calling.
    It began working intermittently, then just fine with both vision and sound.
    Despite updating the driver, the software now doesn't work at all.
    The webcam can be activated via Windows XP Control Panel, but when opening the HP operating software (settings) , nothing works and the programme keeps crashing.
    Re--nstalled the software several times, but nothing has worked so far.
    Anyone else experienced anything like this and found a solution?

    Hello tomonation,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how you are not able to install the HP drivers successfully on for you webcam, and I would be happy to assist you in this matter!
    Essentially, there are still Microsoft drivers installed on your computer with the HP software from the website. With both of these software parcels installed on your computer, the dependant hardware is not able to function optimally.
    This can be reversed by removing the webcam drivers from Programs and Features. Once removed, please bring up the Device Manager and delete the webcam drivers for the HP 2300. As soon as these Microsoft drivers are removed, please download and install the HP 2300 drivers from the website.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Help Integrating iWeb and ImageCaster (WebCam Software)

    Hi All,
    I've tried obtaining assistance with the manufacturer of ImageCaster, but they were little help.
    I'm a newbie when it comes to web cams, website production, HTLM, etc., but want to start building a website with iWeb.
    Was wondering if any ImageCaster software users could provide assistance in integrating an ImageCaster webcam "window" into iWeb (preferably using a custom frame). I've seen posts out here offering help with EvoCam, but not ImageCaster.
    Thanks in advance for any help you can provide.
    iMac G4 (15" flat panel)   Mac OS X (10.4.8)   256 MB memory, 800 MHz w/ SuperDrive

    I don't know... from this page
    http://www.econtechnologies.com/site/Pages/ImageCaster/imgcast_overview.html
    (at the bottom)
    and this page
    http://www.econtechnologies.com/site/Pages/ImageCaster/imgcast_tips2.html
    it looks like it will make web pages for you with various frames, etc.
    Integrating it into iWeb is probably possible, but I don't know enough about the program.

  • Problem with Updated Webcam Software for Windows 7 (I AM NOT USING THE BETA VERSION OF WINDOWS 7)

    I have a dv5-1235dx.  HP posted new software for Win 7 (64) built in camera software.  The install seemed to go fine, but once you click to run the software, nothing happens, so it seems.  About a minute or so later, the application opens.  Why is it taking so long to open.  I have uninstalled/reinstalled multiple times and the problem still exist.  I have tried to go back to the old vista version of the software (running in cap mode), but now that software takes a long time to load.  I have done a restore, with no affect.  What happened?  Note:  I am using the full retail version, not a beta of Win 7 Ultimate.  None of the other Updated HP software has this problem.  HP won't help because Windows is not officially released yet.

    HP MediaSmart Webcam here
    Message Edited by Daniel_Potyrala on 10-17-2009 03:03 AM
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Activation of all my Adobe software doesn't work anymore also Adobe Captivate

    Hello,
    I'm a teacher at the Hague University in the Netherlands and I also bought the Adobe CS6 Master Collection, Adobe Premiere, Adobe Captivate 6 and it worked nice when I installed it in December 2012. But this morning all my Adobe software doesn't function anymore, I get the message that it is a trial version and it will only work for 30 days. This whole morning I am busy to get the software back to work, but also when I reinstall it and type the proper activation keys which also can be found in my Adobe-account, it says that the serials are invalid. Could I please get some support to solve this problem?
    Thank you in advance,
    B. Kranenburg

    Dear Mr. Kranenburg,
    As a teacher at a high school I experience the same problem. The problem is caused by a new licencing policy Adobe forced into place with CS6 products. The licenses you have are only valid for one year. Moreover they are actually valid for less than one year, since projects in Captivate created in the trial version mode you describe will have an expiration date. This will, in the very near future, result in non functioning projects/packages. The only way to overcome this problem is to renew your license, and republish the projects in the newly licensed product.
    I can understand that Adobe wants to get more revenue out of their products. I however do not understand that a license, said to be valid for one year, will not provide a workable solution throughout this full year. A very strange policy indeed!
    J. Bijvoet

Maybe you are looking for

  • Exception occurred: "AI Group Config"

    Recently I have gotten a problem with my LabVIEW VI, used to acquire data from a MEA-Chip. As soon as I try to change the setup of my PCI 6071 E I get he following error: Exception occurred within the external code called by a call library function N

  • Purchasing Photoshop Elements 12 as a gift

    How can I buy Photoshop Elements 12 as a present for someone else? Is it possible to buy a voucher which I can give them so they can then pay for a trial version they have downloaded?

  • Microsoft Radius Server vs ACS/Radius

    Hi, Is there any differences between Microsoft Radius Server and the Radius in ACS. Thanks Ali

  • How to recover CatOS bootup from rommon mode?

    I have a 6509 Sup2 not being able to bootup. It displayed the following error and went into rommon mode. Autoboot executing command: "boot bootflash:cat6000-sup2cvk8.8-3-7.bin" Error : compressed image checksum is incorrect 0x05ECF6AF Expected a chec

  • Back to the basics... PING

    Ok...I have a default configuration on a Cisco 2620 with the FE port configured as IP address 10.10.10.1/24. I've connected my laptop with a x-over cable to the router eth port. My laptop is 10.10.10.2/24 and gateway 10.10.10.1/24. Why am I unable to