Actively use Backup interface/Backup ISP
I have 5 IP addresses on my back up interface. I would like to test using remote desktop through my back up interface. I set up the security TCP 3389 and the NAT to the box I want test. But I think my routing is going back out my outside interface. I do not have a test box so I am not sure I want to start testing established routing. Can you give me an example.
I am using asa5520 version 7.2(3).
Use the following link here you will get example for ASA.
http://www.cisco.com/en/US/products/ps6120/prod_configuration_examples_list.html
Similar Messages
-
I installed a new ASA 5512-X over the weekend for a client. Their backup ISP connection is DHCP based. I need to use the 'dhcp client route track' command on the interface, but it is not available. However according the all the documentation I am looking at and even the ASDM says it should be available.
This is the version of ASA and ASDM they are running:
Cisco Adaptive Security Appliance Software Version 8.6(1)1
Device Manager Version 6.6(1)
I did upgrade to the latest ASA software, so has this command been removed? If I do a '?' in the interface, there isn't a 'dchp' option.
Any help would be appreciated. I really don't want to tell them they need to get a static IP address to resolve this issue.
TIA,
DanLooks like you are hitting bugID: CSCtq78280
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtq78280
Pls open a TAC case to get the fixed on version 8.6.1(x). -
-------------------------------------------------------------------------------------------------------------------------------------------
How can I access the savestore.js contents if the command about:sessionrestore shows a blank box even for already succesfully used backups?
Is there a recent known problem with the about:sessionrestore command or is there any other way understandable to Firefox 29.0.1 through which recover the information stored in the sessionstore.js files.
It seems the command about:sessionrestore is not capable anymore to read the contents of the sessionstore.js file present in the user profile folder.
The box where windows and tabs should be listed is empty.
I tried to paste a few old sessionstore.js files in the user directory while the firefox.exe process was not active, then opened Firefox again and tried to launch the about:sessionrestore command without any result.
I think the files are not corrupted because I used most of them in other occasions and I stored them in folders not connected to the common use of any process.
Also, I already successfully used the about:sessionrestore command in Firefox 29.0.1 in a few other occasions.
I did a "clean reinstall" of Firefox 29.0.1 and the box contained in the tab where about:sessionrestore is executed is still empty even if the files themselves contain such information as tabs location and html addresses.
After this I recovered the profile data I had stored in another folder and this is what you can see attached to this question.
---------------------------------------------------------------------------------------------------------If I select the "show my windows and tabs from last time" option in the startup settings the contents of any savestore.js file i paste in the user profile folder are opened without any problem.
still, the box in the tab loaded by the about:sessionrestore command is blank and empty, so it's not possible to "de-select" any window or tab. it's necessary to find an editor to modify session backup files which may contain "bad addresses".
does such an editor already exists? -
Recovery using backup control file
Hello friends,
I have a scenario where i am unable to recover by database by using backup control file option can u pls give ur expert advice.
1) Database is working in ARCHIVE MODE.
2) One of my file was READ ONLY when i take my closed backup. At this time
v$log file output is :
group# thread# sequence# bytes member arc status first_change#
1 1 8 8192 2 yes inactive 4697463
2 1 9 8192 2 yes active 4717493
3 1 10 8192 2 no current 4717738
3) After 2-3 log switches i have made it READ WRITE.
4) After making it READ WRITE i have taken controlfile backup by using
ALTER SYSTEM BACKUP CONTROLFILE TO 'E:\ORACLE\CONTROL01.CTL';.
5) Again i have make some log switches.
6) Shutdown my database using SHUTDOWN option.
7) Copy my SYSTEM,UNDO,USER,INDEX datafiles from my backup (taken at
step 2) and CONTROL file (taken at step 4).
8) I have not copied my old redo log files so those are new.
9) I mount database & then use this command to recover database :
RECOVER DATABASE USING BACKUP CONTROLFILE AUTO;
10) My recovery process starts applying archived log files and applied upto
sequence no 9. When it starts applying last one 10 which is online redo log
and not yet archived my recovery process fails by giving this error:
ORA-00308: cannot open archived log 'd:\oracle\oradata\practice\archive\1_10.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
11) I try to open database using :
ALTER DATABASE OPEN RESETLOGS;
it gives following warning:
Error at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: datafile 1: 'D:\ORACLE\ORADATA\PRACTICE\SYSTEM01.DBF'
Please guide me why it is so ?
Whether in BACKUP CONTROL FILE CASES system didn't recognise ONLINE REDO LOG FILES or it is anything else.
Regards
SethiHi,
>>I am not using RMAN. I am taking user managed backups. Moreover i have tried what u said that make checkpoints also but again i came to the same result when it try to apply last archived log which was current redo log when database was started to shutdown it says unable to find the specified file & then when i open database using resetlogs it says system file needs media recovery.
it show error because you are using wrong approach of Recovery.
Alter database open Resetlog command is used only in incomplete recovery.
but your are giving
Recover database command,it means ur performing full recovery (means you have apply online redo logfile.) and after applying it you should open the database with Alter database Open command.
No need to give resetlog option.
Again Restore all backup;
Issue Recover database;
and open the database with
Alter database open;
Thanks
Kuljeet Pal Singh -
Recovery using backup controlfile
hai,
can any one explain me on what is the difference between recovering database as,
recover database until cancel using backup controlfile;and
recover database until cancel;regards
ashikHi,
>>Note that you should only use a backup controlfile that was created via 'alter database backup controlfile to /path/to/your/controlfile_backup;'
Not exactly... we can use a control file that was made by a cold backup in order to recover a database.
SQL*Plus: Release 9.2.0.4.0 - Production on Tue Nov 21 21:10:19 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: / as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 93394180 bytes
Fixed Size 451844 bytes
Variable Size 67108864 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
Database opened.
SQL> create user SCOTT identified by TIGER default tablespace USERS quota unlimited on USERS;
User created.
SQL> grant connect to SCOTT;
Grant succeeded.
SQL> connect SCOTT/TIGER
Connected.
SQL> create table emp (cod number primary key);
Table created.
SQL> begin
2 for i in 1..10000 loop
3 insert into emp values (i);
4 end loop
5 end;
6 /
PL/SQL procedure successfully completed.
SQL> commit;
Commit complete.
SQL> select count(*) from emp;
COUNT(*)
10000
SQL> connect system/manager
Connected.
SQL> select name from v$archived_log;
NAME
/backup/archive/1_10.dbf
/backup/archive/1_11.dbf
/backup/archive/1_12.dbf
/backup/archive/1_13.dbf
4 rows selected.
SQL> select * from v$log;
GROUP# THREAD# SEQUENCE# BYTES MEMBERS ARC STATUS FIRST_CHANGE# FIRST_TIM
1 1 14 512000 1 NO CURRENT 51849 22-NOV-06
2 1 12 512000 1 YES INACTIVE 51826 22-NOV-06
3 1 13 512000 1 YES ACTIVE 51840 22-NOV-06
SQL> connect / as sysdba
Connected.
Crash Simulation
SQL> shutdown abort
ORACLE instance shut down.
Lost Data files and Control Files Simulation
SQL> host
oracle@linux:/u01> rm oradata/BDRPS/*.dbf
oracle@linux:/u01> rm oradata/BDRPS/*.ctl
oracle@linux:/u01> ls -l oradata/BDRPS/
total 1524
-rw-r----- 1 oracle oinstall 512512 2006-11-22 08:20 redo01.log
-rw-r----- 1 oracle oinstall 512512 2006-11-22 08:18 redo02.log
-rw-r----- 1 oracle oinstall 512512 2006-11-22 08:19 redo03.log
Restore Data Files and Control Files from last cold backup
oracle@linux:/u01> cp -a /backup/oradata/BDRPS/*.dbf oradata/BDRPS/
oracle@linux:/u01> cp -a /backup/oradata/BDRPS/*.ctl oradata/BDRPS/
oracle@linux:/u01> exit
exit
SQL> startup
ORACLE instance started.
Total System Global Area 93394180 bytes
Fixed Size 451844 bytes
Variable Size 67108864 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-00314: log 1 of thread 1, expected sequence# doesn't match
ORA-00312: online log 1 thread 1: '/u01/oradata/BDRPS/redo01.log'
Begin Recovery Process
SQL> recover database using backup controlfile;
ORA-00279: change 51548 generated at 11/07/2006 20:24:21 needed for thread 1
ORA-00289: suggestion : /backup/archive/1_10.dbf
ORA-00280: change 51548 for thread 1 is in sequence #10
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 52048 generated at 11/22/2006 08:18:35 needed for thread 1
ORA-00289: suggestion : /backup/archive/1_11.dbf
ORA-00280: change 52048 for thread 1 is in sequence #11
ORA-00278: log file '/backup/archive/1_10.dbf' no longer needed for this
recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 52056 generated at 11/22/2006 08:18:36 needed for thread 1
ORA-00289: suggestion : /backup/archive/1_12.dbf
ORA-00280: change 52056 for thread 1 is in sequence #12
ORA-00278: log file '/backup/archive/1_11.dbf' no longer needed for this
recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 52076 generated at 11/22/2006 08:18:37 needed for thread 1
ORA-00289: suggestion : /backup/archive/1_13.dbf
ORA-00280: change 52076 for thread 1 is in sequence #13
ORA-00278: log file '/backup/archive/1_12.dbf' no longer needed for this
recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 52087 generated at 11/22/2006 08:18:37 needed for thread 1
ORA-00289: suggestion : /backup/archive/1_14.dbf
ORA-00280: change 52087 for thread 1 is in sequence #14
ORA-00278: log file '/backup/archive/1_13.dbf' no longer needed for this
recovery
In this moment, I don't have a sequence log 14 archived, then I will use the Current Log File Group for this recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/u01/oradata/BDRPS/redo01.log
Log applied.
Media recovery complete.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
Database altered.
SQL> connect SCOTT/TIGER
Connected.
SQL> select count(*) from emp;
COUNT(*)
10000Cheers -
My sister froze her iPhone by trying to turn it off during a software update (not sure why) and restored it because she thought it would fix it. Unfortunately she unintentionally deleted all of her data and settings. She doesn't use iCloud, so I'm assuming all her files are backed up to her computer when she syncs her iPhone, but using iTunes I can only find two backup points using Edit>Preferences>Devices, both in the past few minutes. I know that each sync overrides the last backup files instead of creating newer ones, so apparently older backup files from her computer can't be used to recover her data. However, we both periodically use an external hard drive to back up our computers by basically dragging and dropping our files onto it, so there is an earlier version of her User folder on the external hard drive. It would definitely be preferable to use the backup files from a few months ago that are on the external hard drive and lose a few photos than to lose years of data, so would it be possible to direct iTunes to those backup files (AppData etc) instead of the ones saved on her computer hard drive? There's not any kind of browse option I can see that could allow me to get iTunes to search for backup files on the external hard drive and I'm not computer savvy enough to manually find the files and connect them to iTunes. Is it even possible to use backup files from an external hard drive? Do I have to replace the ones that exist on her computer now?
Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them. -
I have an external disk that was used on Tiger iMac. I used Backup to save files. Now that I have this external drive connected to a new IMac running SnowLeopard, how do I restore files?
Backup 3.2 is still usable if you have a MM account and can download the upgrade. Otherwise you'll need to restore them via Tiger.
If the backup is not archived, then the individual files may be accessible directly. -
New ipad I set up now try to sync w ITunes gives me 2 choices 1 - set up as new iPad 2 - use backup from old iPad. I only want to sync it. What do I do?
JudyYou might want to try removing they email account and setting it back up again
-
How to back up Home folder to Time Capsule using Backup in OS 10.4.11
I'm new to Time Capsule, but just set up one that I was given, which does 802.11n wireless. No problem connecting to my Intel MacBook and Time Machine. HOWEVER, using Backup v 3.2 on a Dual G4 running OS 10.4.11 was not seamless. The Backup app (needs a MobileMe subscription to use over 100 Mb) gave me the option of a Time Capsule backup, but kept failing to back up my Home folder. The reason given was not enough disk space. Not the problem; plenty of space when I accessed Time Capsule using Airport on my MacBook (OS 10.5). Finally I accessed the Time Capsule from the G4 using the path: Finder => Go => Network => Time Capsule => Connect => TC Password. In other words, I had to access the Time Capsule as if I were networking to another computer.
So had Backup given me some instructions along this line, I wouldn't have had to dither around so long. When I quit Backup and reopened it, the backup plan for the home folder proceeded as normal.I've found a solution, no need to post a response. Thanks!
-
Need a help: how to recover using backup control file?
Please a help:
First computer
1. I create a database
2. put it in archive mode,
3. shutdown and made a cold backup
4. Created backup control file (alter database backup control file to trace)
5. I started up and created some archived log files.
Second Computer
1. I copied all files created in the step 3 above except the control file
2. I create all the same map directory on the 2nd computer as in the 1st computer
3. I recreate the control file from the script got in the step 4 above
4. I Copy archived log files generated at the step 5 in the local directory in the second computer
5. I set the logsource and set the autorecovery to on
6. I recover the database: RECOVER DATABASE USING BACKUP CONTROL FILE UNTIL CANCEL
Error got:
the archived log file applied do not go beyond the first one?,How could I do to applied all archived log files copied from the first computer to the second computer to have the same data?
Thank you very mucharchived log sequeces in the first computerSQL> select sequence#,first_change#,next_change# from v$log_history;
SEQUENCE# FIRST_CHANGE# NEXT_CHANGE#
1 553723 555484
2 555484 557345
Actions I did in the second Computer(after copied the former two archived log files from the 1st computer)
SQL> CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG' SIZE 50M,
9 GROUP 2 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG' SIZE 50M,
10 GROUP 3 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG' SIZE 50M
11 -- STANDBY LOGFILE
12 DATAFILE
13 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF',
14 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF',
15 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF',
16 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF'
17 CHARACTER SET WE8ISO8859P1
18 ;
Control file created.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Disabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 0
Next log sequence to archive 0
Current log sequence 0
SQL> alter database archivelog;
Database altered.
SQL> set logsource C:\local_destination1_orcl
SQL> set autorecovery on;
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 555611 generated at 01/18/2007 14:14:14 needed for thread 1
ORA-00289: suggestion :
C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC
ORA-00280: change 555611 for thread 1 is in sequence #1
ORA-00328: archived log ends at change 555483, need later change 555611
ORA-00334: archived log:
'C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC'
Idon't know where the change 555611 is coming from? -
Transfered files from Mac Pro to iMac OS10.7. Copied bookmarks using "backup and restore" from "Organize bookmarks". File copied correctly as bookmarks 10-10-11.jsom, but would not restore on Firefox on new iMac.
Firefox 2 versions use the file bookmarks.html to store the bookmarks.
See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
With Mac OS X 10.4 you can use Firefox 3.5 or 3.6
* http://www.mozilla.com/firefox/all.html
* http://www.mozilla.com/firefox/all-older.html
*http://www.mozilla.com/en-US/firefox/system-requirements.html
*http://www.mozilla.com/firefox/system-requirements-v3.html -
Recover database until cancel using backup controlfile Fails with ORA-01547
Hi
First of all, I'm sorry for posting in this community as my issue doesn't have any thing to do with Rman, but I couldn't find any more relative Community to post in
our System is Oracle EBS 11i and the OS on the production is AIX 5.2 / and the DR is 5.3 / DB version is 9i
we have our Oracle ERP scheduled using crontab to take a database COLD backup daily using gtar -cvzf .
yesterday I needed to clone the database only, so I used my usual method witch is
1) on the source SQL> alter database backup controlfile to trace as '<dest>/makecntrlfil.sql'
then you can delete the Commented header and change the first command from
"CREATE CONTROLFILE REUSE DATABASE <SOURCE> NORESETLOGS ..."
TO
CREATE CONTROLFILE SET DATABASE <TARGET> RESETLOGS <NO>ARCHIVELOG
2) de-compress the tgz files
3) on the target edit the $ORACLE_HOME/dbs/init<source>.ora, $ORACLE_HOME/environment file
4)run /ORACLE_HOME/appsutils/clone/bin/adcfgclone.prl
5) delete old controlfiles
6) on the database run the script you created on firs t step to create a new control fole
7)recover database until cancel using backup controlfile
8) alter database open resetlogs
add new temp file system
this way I used to do it
but yesterday when trying to execute recover database it didn't work, and gave this error
ORA-00279: change 6450277404 generated at 02/28/2013 02:47:56 needed for thread
1
ORA-00289: suggestion : /ERPDEV/DBASE/devdb/9.2.0/dbs/arch1_188462.dbf
ORA-00280: change 6450277404 for thread 1 is in sequence #188462
Specify log: {<RET>=suggested | filename | AUTO | CANCEL} >> I gave cancel >> so >>
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/ERPDEV/DBASE/SYS/devdata/system01.dbf'
nothing strange in the original alert log file in the time of taking the backup
So can You please tell me what maybe wrong and why it used to work before and now it's not
take in consideration that we are on archive log mode, but not using Rman or the archived Logs for backup and the sequence it needed ( 188462 ) is too old and already deleted on Production.the output of the sript
Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root ConcMgr will not work ConcMgr will not work ConcMgr will not work #####################################################
172.16.10.10:1.0
access control disabled, clients can connect from any host
You are running adstpall.sh version 115.19
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adapcctl.sh stop script returned:
adapcctl.sh version 115.54
Apache Web Server Listener :httpd ( pid 765998 ) is running.
Stopping Apache Web Server Listener (dedicated HTTP) ...
Apache Web Server Listener (PLSQL) :httpd ( pid 2830390 ) is running.
Stopping Apache Web Server Listener (dedicated PLSQL) ...
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adalnctl.sh stop script returned:
adalnctl.sh version
Shutting down listener process APPS_ABP.
adalnctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adtcfctl.sh stop script returned:
You are running adtcfctl.sh version 115.14
Shutting down TCF SocketServer for ABP on port -1.
adtcfctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adcmctl.sh stop script returned:
You are running adcmctl.sh version 115.28
Shutting down concurrent managers for ABP ...
Submitted request 7481224 for CONCURRENT FND SHUTDOWN
adcmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfrmctl.sh stop script returned:
You are running adfrmctl.sh version 115.37
Stopping forms server for ABP on port 9003.
adfrmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adrepctl.sh stop script returned:
You are running adrepctl.sh version 115.32
stopping Reports Server for ABP on port 7003.
kill -9 827420
Reports Server for ABP successfully stopped.
adrepctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfmcctl.sh stop script returned:
You are running adfmcctl.sh version 115.19
Stopping forms load balancing client for ABP.
adfmcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfmsctl.sh stop script returned:
You are running adfmsctl.sh version 115.15
Stopping forms metrics server for ABP on port 9203.
adfmsctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/jtffmctl.sh stop script returned:
You are running jtffmctl.sh version 115.16
Shutting down Fulfillment Server for ABP on port 9303 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
All enabled services on this node are stopped.
Check logfile /ERPABP/APPL/abpcomn/admin/log/ABP_babtain-erp/04010130.log for details
Exiting with status 0
You are running addlnctl.sh version 115.7
Logfile: /ERPABP/DBASE/abpdb/9.2.0/appsutil/log/ABP_babtain-erp/addlnctl.txt
Shutting down listener process ABP ...
addlnctl.sh: exiting with status 0
You are running addbctl.sh version 115.10
Shutting down database ABP ...
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Apr 1 01:36:25 2013
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Database closed.
Database dismounted.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.8.0 - Production
addbctl.sh: exiting with status 0
You are running addbctl.sh version 115.10
Starting the database ABP ...
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Apr 1 01:38:48 2013
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 6829474752 bytes
Fixed Size 742336 bytes
Variable Size 1493172224 bytes
Database Buffers 5324800000 bytes
Redo Buffers 10760192 bytes
Database mounted.
Database opened.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.8.0 - Production
addbctl.sh: exiting with status 0
You are running addbctl.sh version 115.10
Shutting down database ABP ...
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Apr 1 01:39:08 2013
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Database closed.
Database dismounted.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.8.0 - Production
addbctl.sh: exiting with status 0
root 2883784 2097278 0 01:39:54 - 0:00 grep abpappl
root 1425530 2097278 1 01:39:54 - 0:00 grep abpora
Taring /ERPABP/DBASE/SYS/abpdata
Mon Apr 1 01:39:54 SAUST 2013
Mon Apr 1 03:00:16 SAUST 2013
Taring /ERPDEV/DBASE/SYS/abpdata
Mon Apr 1 03:00:16 SAUST 2013
Mon Apr 1 03:10:18 SAUST 2013
Taring /ERPABP/DBASE/DATA/abpdata
Mon Apr 1 03:10:18 SAUST 2013
Mon Apr 1 04:51:04 SAUST 2013
Taring /ERPDEV/APPL/DATA/abpdata
Mon Apr 1 04:51:04 SAUST 2013
Mon Apr 1 05:02:58 SAUST 2013
You are running addbctl.sh version 115.10
Starting the database ABP ...
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Apr 1 05:04:46 2013
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 6829474752 bytes
Fixed Size 742336 bytes
Variable Size 1493172224 bytes
Database Buffers 5324800000 bytes
Redo Buffers 10760192 bytes
Database mounted.
Database opened.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.8.0 - Production
addbctl.sh: exiting with status 0
You are running addlnctl.sh version 115.7
Logfile: /ERPABP/DBASE/abpdb/9.2.0/appsutil/log/ABP_babtain-erp/addlnctl.txt
Starting listener process ABP ...
addlnctl.sh: exiting with status 0
Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root Please Do not Forgot to run /usr/bin/runmwm as root ConcMgr will not work ConcMgr will not work ConcMgr will not work #####################################################
172.16.10.10:1.0
access control disabled, clients can connect from any host
You are running adstrtal.sh version 115.16
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adapcctl.sh start script returned:
adapcctl.sh version 115.54
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adalnctl.sh start script returned:
adalnctl.sh version
Checking for FNDFS executable.
Starting listener process APPS_ABP.
adalnctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adtcfctl.sh start script returned:
You are running adtcfctl.sh version 115.14
TCF SocketServer for ABP on port -1 is already started.
adtcfctl.sh: exiting with status 2
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adcmctl.sh start script returned:
You are running adcmctl.sh version 115.28
Starting concurrent manager for ABP ...
Starting ABP_0401@ABP Internal Concurrent Manager Default printer is noprint
adcmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfrmctl.sh start script returned:
You are running adfrmctl.sh version 115.37
Starting forms server for ABP on port 9003.
adfrmctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adrepctl.sh start script returned:
You are running adrepctl.sh version 115.32
starting Reports Server for ABP on port 7003.
adrepctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfmcctl.sh start script returned:
You are running adfmcctl.sh version 115.19
Starting forms load balancing client for ABP.
adfmcctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/adfmsctl.sh start script returned:
You are running adfmsctl.sh version 115.15
starting forms metrics server for ABP.
adfmsctl.sh: exiting with status 0
.end std out.
.end err out.
Executing service control script:
/ERPABP/APPL/abpcomn/admin/scripts/ABP_babtain-erp/jtffmctl.sh start script returned:
You are running jtffmctl.sh version 115.16
Validating Fulfillment patch level via /ERPABP/APPL/abpcomn/java Fulfillment patch level validated.
Starting Fulfillment Server for ABP on port 9303 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
All enabled services for this node are started.
Check logfile /ERPABP/APPL/abpcomn/admin/log/ABP_babtain-erp/04010505.log for details
Exiting with status 0
MWA Telnet Server Release: 1.0.8.4 [December 12th 2002] Mon Apr 1 05:06:01 SAUST 2013
9653.50 /store/abp/data/data_abpdata_010413.tgz
1089.50 /store/abp/data/datadev_abpdata_010413.tgz
0.04 /store/abp/data/mkctrl.sql
13309.38 /store/abp/data/sys_abpdata_010413.tgz
1000.25 /store/abp/data/sysdev_abpdata_010413.tgz
Mon Apr 1 05:06:01 SAUST 2013
####################################################################################################################### -
ORA-01194 and ORA-00604 when using backup controlfile set #2
Database version Oracle 11.2.0.1
Enterprise Linux 5.4
Database is in archivelog mode.
I'm trying to recover a database according to set #2 of a backup controlfile to trace. Creating the controlfile works fine, but recovering the database fails.
From what I can gather, the recovery fails because it cannot roll forward - sequence 39 is in the missing online redo logfile. However, the database is opened with the restlogs option, and I understand that it should use the archivelogs in order to roll backwards. Since this is a new controlfile it does not know about archivelogs, but it does not accept to register or use any archivelog files.
The recovery as outlined in set #2 does not seem to work as advertised. Any ideas?
Following errors:
SQL> CREATE CONTROLFILE REUSE DATABASE "RCAT" RESETLOGS ARCHIVELOG etc.
Control file created.
Tyring to register on of the archivelogs does not work:
SQL> ALTER DATABASE REGISTER LOGFILE '/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_33_69bfo5tx_.arc';
ALTER DATABASE REGISTER LOGFILE '/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_33_69bfo5tx_.arc'
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level
Applying an existing archivelog during recovery does not work:
SQL> recover database using backup controlfile until cancel
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_33_69bfo5tx_.arc
ORA-00310: archived log contains sequence 33; sequence 39 required
ORA-00334: archived log:
'/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_33_69bfo5tx_.arc'
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u02/RCAT/datafile/o1_mf_system_6959kz7l_.dbf'
ls -l /u02/fra/RCAT/archivelog/2010_09_19:
-rw-r----- 1 oracle dba 49313280 Sep 19 00:01 o1_mf_1_33_69bfo5tx_.arc
-rw-r----- 1 oracle dba 312320 Sep 19 00:03 o1_mf_1_34_69bft63b_.arc
-rw-r----- 1 oracle dba 20343808 Sep 19 02:10 o1_mf_1_35_69bo6y6j_.arc
-rw-r----- 1 oracle dba 40960 Sep 19 02:12 o1_mf_1_36_69boc9t8_.arc
-rw-r----- 1 oracle dba 20992 Sep 19 02:13 o1_mf_1_37_69bofng4_.arc
-rw-r----- 1 oracle dba 794624 Sep 19 02:15 o1_mf_1_38_69bokwbf_.arcThanks,
MarkusSpecifying sequence 39 results in the same error message, which is what is what it tries to apply when using "recover until cancel" and typing cancel. But the problem is that sequence 39 was in the online redologs, which were not archived yet.
SQL> select name, first_change#,next_change# from v$archived_log;
NAME FIRST_CHANGE# NEXT_CHANGE#
/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_34_69bft63b_.arc 1259096 1259295
/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_37_69bofng4_.arc 1269876 1269935
/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_35_69bo6y6j_.arc 1259295 1269766
/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_36_69boc9t8_.arc 1269766 1269876
/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_38_69bokwbf_.arc 1269935 1270557
/u02/fra/RCAT/archivelog/2010_09_19/o1_mf_1_33_69bfo5tx_.arc 1241003 1259096
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_21_699l4tkj_.arc 1215727 1215730
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_24_699s5pj8_.arc 1215736 1224966
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_26_699s5rp4_.arc 1224969 1224972
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_15_6987rbqp_.arc 1174393 1174511
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_23_699l4xng_.arc 1215733 1215736
NAME FIRST_CHANGE# NEXT_CHANGE#
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_28_699s5tqt_.arc 1224975 1224987
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_22_699l4w5r_.arc 1215730 1215733
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_29_699s5vw2_.arc 1224987 1224990
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_19_699l4or0_.arc 1215721 1215724
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_25_699s5qd6_.arc 1224966 1224969
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_30_699s5yvs_.arc 1224990 1224999
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_27_699s5stf_.arc 1224972 1224975
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_32_69b2hgvz_.arc 1225003 1241003
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_17_699k5oxl_.arc 1194778 1209476
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_16_699jsxol_.arc 1174511 1194778
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_20_699l4rx2_.arc 1215724 1215727
NAME FIRST_CHANGE# NEXT_CHANGE#
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_18_699l4msq_.arc 1209476 1215721
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_14_6987mljx_.arc 1162149 1174393
/u02/fra/RCAT/archivelog/2010_09_18/o1_mf_1_31_699s61sr_.arc 1224999 1225003
25 rows selectedHow does it actually know about all the archivelogs?
Edited by: Markus Waldorf on Sep 20, 2010 8:37 AM -
Using Backup 3.1.2 to Restore to iTunes
My iMac G5 logic board died and fortunately I had done a recent backup of my iTunes purchases using Backup 3.1.2. How do I get the data back onto my new brand new shiny MacBook and into iTunes? Do I use Backup 3.1.2 to restore or do I use Time Machine? My backed up data is stored on my iDisk. How do I get data from iDisk back into iTunes? Please note that the backup was broken up into about 40 different individual files when the data was originally passed up to my iDisk. Any help would be greatly appreciated, I'd like to start listening to music again. Thanks.
Set up as New, disable Find My Phone in the setting, then restore from the latest backup.
-
Why cant the controlfile be in sync, when using backup controlfile
hi all,
i understand a few point ...from a dba friend of mine..
you need a resetlog to sync the datafile headers and the controlfiles
1) you need a resetlog when doing incomplete recovery
2) you can recovery completely using a backup controlfile provided you have all the necessary archived logs and online redo logs.
3) but in order not to do resetlog after 2) , you must re-create the controlfile
my questions are
q1) are the following point above true ?
*q2) why cant oracle update the controlfile when recovering using the backup controlfile ? in that case, i do not need to recreate a controlfile , isnt it ?
Rgds,
Noobuser12050668 wrote:
hi hermant,
q1) why would i need to open the database with resetlog ?
Yes. i am using a backup controlfile, but i have all the archived and online redologs till point of failure ?
The purpose of a resetlog is to sync the controlfile and datafile headers , isnt it ? but i do not need to sync, as i have all the latest applied
am i right ?
If you use RECOVER DATABASE USING BACKUP CONTROLFILE in this case control file type is *"BACKUP"* but not *"CURRENT"* due to even you have all archivelogs and online logs you have to open database RESETLOGS statement.Actually after applying all archive and online redo logs ALTER DATABASE OPEN RESETLOGS internally sync and "Say" to control files "RECOVER FINISHED".Because CF type is BACKUP.
q2) You need to OPEN RESETLOGS. You can choose to create controlfile OR not create controlfile (i.e. open with the backup controlfile that was used for the RECOVER).
If you do a CREATE CONTROLFILE it has to be CREATE CONTROLFILE RESETLOGS, followed by ALTER DATABASE OPEN RESETLOGS.
in what circumstances, would i need to re-create the controlfile when i can still use the backup controlfile ? as in any case, i would still need to resetlog.
Rgds,
NoobIf you have backup controlfile then do not need recreate control files.And you need use backup control file.If you lost all backup of control files and copies then or you want change database name then you can use RECREATE CONTROL FILE again.
Maybe you are looking for
-
Installing Windows XP to a Mid 2010 15" MBP. Worst nightmare ever. Help!!
Alright. I've read through about 300 posts in this forum and I can't find anything that is simple, easy to read, and works. Here's the deal. I have a 15" MacBook Pro that I got mid 2010 brand new. I have a Windows XP Service Pack 2 disc. I have a Sno
-
WRT54G3G-ST ROUTER will it work with WRE54G EXPANDER
Does anyone know if the WRT54G3G-ST ROUTER with a sprint card will it work with WRE54G EXPANDER, and if so how do you get it set up. Thanks
-
Installing J2EE 1.4 Beta 2
I downloaded and installed the J2EE 1.4 Beta 2 and I am unable to start the server. I keep getting the same message: Starting the application server, please wait. Could not start the domain domain1 Startup failed. Please check the server log for more
-
Photoshop Camera Raw Adjustment Pins Large
Hi Your help is needed please. I use camera raw version 9.0.0414 with the latest Photoshop CC. When adding an adjustment layer PIN in camera raw the Pins display large and seem difficult to navigate, move, select, delete. Is this an update of camer
-
Does anybody know about php combo boxes
I can get a drop down selection work on its own but when place with my registration form it doesn't work as well. So I am wanting to start from scratch using the registration form. The countries are Australia, New Zealand, UK , USA and Canada. Should