Activesync set up steps for Z10

Hey everyone,
I am not all that familiar with how or what the steps are to set up activesync on the new Z10. I know what email address I want it to recognoze and the server name yet I am unsure about the A to Z steps on were to go and how to complete...
Any help would be awesome.
Thanks in advance.

hello jonredwood,
thank you for your comments. Let me add three.
1)
ActiveSync does require a URL, except for GMail and Outlook.com.
Please check the Z10 documentation here:
http://docs.blackberry.com/en/smartphone_users/deliverables/50498/mwa1340198084680.html#mwa134019808...
I quote:
Work accounts supported by Microsoft ActiveSync
If your organization doesn't use the BlackBerry Enterprise Service but does use Microsoft ActiveSync, make sure you know at least the following information from your administrator:
Your username and work network password
Server address
For the sake of completeness, I also add the official Outlook help on Microsoft's server that also explain how to get the server address for Android/iOS devices (process is exactly the same for a BlackBerry10 device).
http://help.outlook.com/en-gb/140/bb896613.aspx
2)
connecting your BlackBerry Phone to a company Exchange email server through Outlook Web Access (or through Outlook WebApp) requires BIS, which does not exist for the Z10. As a reminder, BIS only exists for legacy devices (BlackBerry OS7 and prior).
The BIS/OWA connectivity gives email synchronization, but no calendar or contacts database access. You need to manually synchronize those two databases using the Desktop Software.
3)
Once your Z10 is connected to your company's ActiveSync server (without BES5 and without BES10), you will have access to :
email synchronization
calendar synchronization
contacts synchronization
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

Any steps for Setting up NetTalk on M20

I notice there is a method to set up xbox for use on cisco valet router m20 by accessing the router page and tweaking some of the settings.
Is there a similar method to dedicate one of the router ports for use by NetTalk?
I have inconsistent performance and think the router may need tweaking.
I think NetTalk can be set to 4.2.2.2 (or something to this effect)
If anyone is interested in what I am experiencing - when NetTalk is plugged into the router, the led light for the port is blue while the other leds stay green. Which I think is correct and a good thing.
However, sometimes the NetTalk goes off line and i have to disconnect it from the router to re-establish connectivity.
And sometimes all the ledsl turn blue and requires that i unplug the NetTalk gadget from the router and reset everything.
Update to above post:
The following response was provided to me by NetTalk Support. Can anyone help me execute the steps below?
" Hello,
We believe a port change in your unit may alleviate your current issue. Please, if possible, place your DUO on the DMZ option of your router by logging into the router interface and placing the DUO's IP into the DMZ.
Alternatively you can port forward Port 80 TCP to the IP of the DUO. This will allow us to gain access to the DUO via the public IP from our end and allow us to make the necessary port change. Let us know when this is done.
Once this is done please visit http://www.canyouseeme.org/ and check to see if port 80 is visible. If it is visible then generally we should be able to access your unit."
Solved!
Go to Solution.

@ HDNUT
Well, if you are using (or want to use ) nettalk directly from your router, there is no problem with configuring the router with placing the nettalk ip in DMZ.
If setting up a DMZ dedicated to for the NetTalk device doesn't improve your situation, you will likely need to send the unit in for replacement or get your money back from the retailer due to the device being incomptable with your system. My suggestion is to get your money back and try something else.
(Unfortunately, I waited too long for the NetTalk people to help me and i forfeited my option to return the inoperational device for a refund. NetTalk finally sent me a firmware update which killed the device DEAD. It required a number of emails and then threats and many weeks to finally get them to issue a replacement. To date, i havent received one yet and it may not still work when i do. So i recommend for you not to wait if device isn't working after setting up the DMZ.)
In any case, when the router no longer has NetTalk connected to it, you can remove the DMZ settings from via the router page.
The steps for configuring the DMZ are provided in this thread. (They were eventually provided to me by the NetTalk people and I saved them on this thread for others.)
Good Luck !
PS: A friend of mine has the same computer configuration as i do but uses OOMA VOIP with great success but its pricy.

HT204053 Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Go to Settings>iCloud and sign in with your Apple ID to create the account. Then turn on the data you wish to sync with iCloud. See http://www.apple.com/icloud/setup/ios.html.

Needs steps for Printer setting for User-customized Paper Size

Hii
I need steps for Printer setting for User-customized Paper Size
for my requirement i hav to design this for a paper which is 9cm length and width 23cm and printer is Laser printer
Thanks
Ravi

Hi ,
Kindly send me materials regarding printer configuration , I need to confiure a printer .Kindly help me.
My ID is rakeshhaari at gmail dot com
Regards,
Hari

When I oppen the internet, I want this to be made by Mozilla Firefox, not by Internet Explorer how it made now. I want to know the steps for this setting. I have installed windows X. Thank you very much in advance!P.

Question
When I oppen the internet, I want this to be made by Mozilla Firefox, not by Internet Explorer how it made now. I want to know the steps for this setting. I have installed windows X. Thank you very much in advance!P

Hi,
This is [[How to make Firefox the default browser]]

Steps for setting up Siebel Collaboration

Hi,
If anyone has integrated Siebel with Microsoft SharePoint, I appreciate if you can please give me some information on where to start and the steps for accomplishing this. I am following the Collaboration Guide on bookshelf, but it looks to me as though there are several gaps between steps.
Please help.
Thanks in advance.

Hello,
The steps for integrating Siebel with Microsoft share point are mentioned in following article.
http://download.microsoft.com/download/9/8/c/98c37b5e-63de-48d3-bd03-2ebd76b94bbe/Integrating_Siebel_CRM_with_SharePoint_Server.pdf
You can also reffer following article for your clearification.
http://hosteddocs.ittoolbox.com/TechNote%2019%20-%20Siebel%20-%20SharePoint%20Integration%20FAQs.pdf
All The Best
Priyanka

Ipod not recognized by itunes...next step for nike+

when i started to set up the nike+ i downloaded the new version of itunes then later downloaded the new software update for the ipod nano...now when i plug the ipod into the computer using the usb cord, i get a message that says this...The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software....i have attempted to install, reinstall, remove and install again, itunes and the updated software... yet it still will not recognize the ipod when it is plugged in. How do i get the ipod to be recognized and then what is my next step for using the Nike+ shoes?
ipod nano

I can't even get the tab that says Nike+ when I am trying to sync up. I can't get it to even go on to the Itunes. I can purchase music no problem

Setting up iChat for Yahoo

Okay I must be missing something because I don't think I'm setting this up right. I registered with Jabber and have an account. Now what are the steps for setting up yahoo and using yahoo buddies? Please can someone explain it in simple terms because I am having a brain **** or something. Thanks

Hi,
See the three links on the left of this section.
You have done the the first link stuff.
You need the Second Link stuff (AllForces) and to do that you need or may need to chose a Jabber Server from the third link that does Transports (To Yahoo)
In the third Link the ones that show coloured Service markers can be accessed from any other Jabber Server such as GoogleTalk.
Ones with greyed out Services marker need you to be logged in to that server (with a Jabber ID from them).
Summary.
A Jabber ID
Set up Transport with a Jabber Server using the Allforces info
You may need to pick a Jabber Server that allows access from any other Jabber server from the third Link.
You then need to add you buddy in the correct form normally with a % symbol replacing the @ one in the screen name and adding the Transport after another @ symbol (screename%[email protected])
9:13 PM Monday; April 6, 2009

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the Paragraph Designer.

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the paragraph designer. Here are the steps to dysfunction:
1. In Paragraph Designer, for Tab Stops, click Edit. Edit Tab Stop dialog box opens, and the Paragraph Designer dialog box closes.
2. Type value in New Position box.
3. Click Continue. The Edit Tab Stop box closes.
4. Open Paragraph Designer. No tabs are recorded.
Discussion of a similar problem occured on this forum in June 2010. At that time, the resolution seemed to be to upgrade to 9.0.3. Has anyone else encountered this problem with these versions?
Thanks.

Hi, Arnis,
Brilliant! Thanks so much. I only looked at the later discussions of that thread, which seemed to indicate the problem would be solved by an upgrade to 9.0.3.
-Trish

How can i set my old ipod touch up to be used by someone else ie wipe all my details etc off and set it up for new user

Hi i need help i have got a second hand ipod touch generation 4 how can i delete all of the previous owners stuff and set it up for myself to use for facetime etc

Just restore it. When it gets to the point that asks you if you want to restore from back up or set up as new, select new.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

How to set the conditions for item deletion approval workflow?

Hi,
I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
process completes .
Change the behavior of the single task: 1.when a task is Pending.
[I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
When user deletes an item: 1. intimation mail.
How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
Thanks,
Praveen ji

Hi,
According to your post, my understanding is that you wanted to start approval workflow when item deleted.
You should first make some changes to trigger the workflow when you delete the item.
You can use the Event Receiver to achieve it.
In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to set PDF version for the output file in ES4

I am using LiveCycle ES4 for converting word docs to PDF. In our client we invoke createPDF method of GeneratePdfServiceClient class. We are using a custom PDF setting in LiveCycle in which we have defined configuration as per the business requirement.
We need the PDF version of the document to be set to 1.4. For this, we are setting the value for compatibility (under File Option) to Acrobat 5 (PDF 1.4) in custom PDF setting template in LiveCycle adminui and in Acrobat preferences. Both these setting are not working and the resulting document has PDF version set to PDF1.5. Can you tell me how the version of resulting document be set to 1.4??

Hi Neelam,
I tried it and did the personalization as the help documentation said.
But I don't know why it doesn't work:(
I followed these steps:
1. open workbook and select a value for the variable used in query
2.click personalized variable and new window pop up then I select the value I chose and added to the selection.
3.click ok and quit
4.save workbook
but next time I open this workbook, the variable selection window still pop up.
BR
Fanchest

How to set default website for exchange 2010

I'm unable to launch the Exchange Management Console, and then I read that it's necessary to set the default web site in a particular way, in order for Exchange 2010 Management Console to work:
http://social.technet.microsoft.com/Forums/en/exchange2010/thread/4d396628-3867-4c95-9541-e0eb021e0135
However, after setting up Sharepoint, I see that it has modified the default website, and I'd like to ask for specific settings on how the default web site bindings should look (for exchange). Could someone please advise what I need to do to correct it?
I'm having trouble interpreting what Mike Crowley recommends in the linked post above, in terms of actual steps to the site binding information (which won't mess up what exists).
Currently it says:
Type           port         ip address        binding information
net.tcp
808:*
net.pipe
net.msmq                                         localhost
msmq.formatname                            localhost
http            80             127.0.0.1
https          443            *
http           80              *
https          443            127.0.0.1
It seems the line for http on port 80 is *, which I guess is equivalent to 'all unassigned'. Is the previous http port 80 binding to 127.0.0.1 causing the problem?
But I'm also supposed to set a Powershell VDir in IIS. Can someone provide steps for that?

Regarding SharePoint on Exchange:
It was not allowed earlier, as documented here:
http://office.microsoft.com/en-us/sharepoint-portal-server-it/coexistence-and-interoperability-guide-for-sharepoint-products-and-technologies-HA001160777.aspx & here:
http://support.microsoft.com/kb/825505 but there doesn't seem to be anything more recent than this. I would work under the assumption it is not supported outside of
SBS 2011 (which I am not very familiar
with).
Mike Crowley
Check out My Blog!

How to extract data into the set-up table for 2LIS_06_INV LIS structure

We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay

1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction'

Activesync set up steps for Z10

Similar Messages

Maybe you are looking for