ActiveX Control recording but not playing back in a VS 2012 Web Performance Test

I am testing an application that loads an Active X control for entering some login information. While recording, this control works fine and I am able to enter information and it is recorded. However on playback in the playback window it has the error "An
add-on for this website failed to run. Check the security settings in Internet Options for potential conflicts."
Window 7 OS 64 bit
IE 8 recorded on 32 bit version
I see no obvious security conflicts. This runs fine when navigating through manually and recording. It is only during playback where this error occurs.

Hi IndyJason,
Thank you for posting in MSDN forum.
As you said that you could not playback the Active X control successfully in web performance test. I know that the ActiveX controls in your Web application will fall into three categories, depending on how they work at the HTTP level.
Reference:
https://msdn.microsoft.com/en-us/library/ms404678%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
I found that this confusion may be come from the browser preview in the Web test result viewer. The Web Performance Test Results Viewer does not allow script or ActiveX controls to run, because the Web performance test engine does not run the, and for security
reasons.
For more information, please you refer to this follwoing blog(Web Tests Can Succeed Even Though It Appears They Failed Part):
http://blogs.msdn.com/edglas/archive/2010/03/24/web-test-authoring-and-debugging-techniques-for-visual-studio-2010.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Recorded Audio Not playing back in Premiere Pro

    I use Dxtory to record; Sound from system as well as mutual programs such as skype all playback as intended. The audio from my microphone, though it plays back when reviewing it in a media program, is not present when I import it into Premiere. Still new to all of this. Any suggestions?

    Hi AkaDc,
    Though it was made for Premiere Pro CS6, this video tutorial should assist you:
    Hope it helps.
    Thanks,
    Kevin

  • Premiere Pro CS3 PCM audio recognized but not playing back

    Hello all,
    I have an AVI file which uses the Huffyyuv codec and PCM audio. Premier Pro (PP) recognizes the audio, as I see the audip specs in the project pane.
    The following are the properties of the source video:
    Type: AVI Movie
    File Size: 500.2 MB
    Image Size: 720 x 400
    Pixel Depth: 720
    Frame Rate: 25.00
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:01:11:09
    Average Data Rate: 7.0 MB / second
    Pixel Aspect Ratio: 1.0
    AVI File details:
    Contains 1 video track(s) and 1 audio track(s).
    Interleave: 1 : 0.50
    Video track 1:
    Size is 487.04M bytes (average frame = 287.06K bytes)
    There are 1784 keyframes.
    Frame rate is 25.00 fps
    Frame size is 720 x 400
    Depth is 24 bits.
    Compressor: 'HFYU', Huffyuv v2.1.1
    Audio track 1:
    Size is 13.06M bytes
    Rate is 48000 samples/sec
    Sample size is 16 bits
    The audio will play on all media players and also on Windows Movie Maker. But on PP, it does not play in the source monitor or in the timeline.
    Any help would be appreciated - Thanks in advance!

    Well, the PCM/WAV 48KHz 16-bit should be fine.
    Since it is not, something must be afoot. The first thing that I would do is check that that Clip has a CFA and PEK file n the Media Cache folder. If not, then Conforming might not have been allowed to complete, though the Source Monitor should be able to play it, as it relies on the actual source file.
    Then, if it's still a no-go, I'd try a Render/Replace for that file's Audio portion.
    If that still does not work, if you have Soundbooth, Audition or even the free Audacity, I'd rip the Audio to PCM/WAV 48KHz 16-bit (yes, I know that is what it already is, but something is not working), and Import that resultant file, replacing any Audio stream from the muxed file.
    Now, one quick question, and probably should have been asked first - do you get other Audio to play fine in PrPro? If not, see this ARTICLE.
    Good luck,
    Hunt

  • Quicktime.mov not playing back from website

    iWeb 3.0.4
    I downloaded three .MOV to my site. One is playing back ok, the other two are only displaying the QuickTime symbol. I did empty the browser cache, but to no avail. Did check with server and the .MOV files are in the html folder, but not playing back. I also re-uploaded the questionable .MOV files, but it still does not let me open the files on my site. site name : bodoholst.com
    thanks in advance

    All three movies play OK for me.
    The pages are slow to load as this method of adding them to the pages requires the movie file to download with the web page.
    If you are happy to depend on viewers having the QuickTime plugin, this is a better way...
    http://www.iwebformusicians.com/Website-Movie-Video/Poster-Movie.html
    So that everyone can see your movies you really need to have flash fallback since there's still a lot of people around who don't have the QT plugin installed...
    http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
    http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
    http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html

  • TS1424 i downloaded an album from i tunes, but it will not play back correctly,tracks stop half way through and skip to the next one. what can i do???

    I downloaded an album from i tunes, but it will not play back correctly,
    it starts a track and then stops randomly and jumps to the next track
    and then does the same thing ad ainfinitum! What to do??

    Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link.

  • When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally.

    When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally. i have an iPhone 5. I think this happened sometime after the last upgrade but I am not sure when. is there a setting on the phone that may have gotten changed somehow?

    Slide your finger up from the bottom of the screen to reveal the Controls panel. One button controls orientation lock to prevent the screen rotating as you rotate the phone. You can toggle that control on and off as you need. Slide the panel back down when you are finished with it.

  • Sound Does not Play Back

    I am playing recorded video from a Sony HDR-HC1 through the DV out and capturing in on location. All goes well(except for some red frame video) during capture, good video and audio. I captured three times. On one occasion the audio played back. The other two it did not. Audio will not play back in PP CS3. The file is an AVI T2. The same clips play back fine in Edius 3.6 with good sound.
    Any tips on what is wrong?
    Kent

    Hey There and Welcome to the mac forum!!!!
    Could it be possible that you moved or even trashed the audio files you were using? If so then they get trashed in imovie to.
    Next time, transform the movie into a Quicktime movie (once you are completely done the project). Once you have done this, you can move or even trash any of the elements of your movie (even the footage) but this will make your actual imovie project useless (The Quicktime one will be fine).
    I hope this helps,
    -Hooked

  • Ipod shuffle syncs all music but only plays-back MPEG audio

    My iPod shuffle syncs all the music I specify but will not play-back AAC files!!  It will only play-back MPEG audio files. Is anyone else having the same issue?  Have restored it numerous times and tried fewer files / more files but no joy.  The voiceover just says "please sync with iTunes"

    Hi MattG-Eastbourne,
    If you are having difficulties with your iPod shuffle not playing certain audio content you may want to troubleshoot using the steps in this article -
    iPod: Troubleshooting songs and audiobooks that won't play
    http://support.apple.com/kb/HT2045
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Youtube videos are not playing back

    Youtube videos are not playing back in Safari 5.1.7. I've also checked this in Firefox 16.0.2.
    I am running OS 10.6.8.
    Why is this happening? I need this capabilitiy for my work efforts.
    Thanks (in advance)!

    I'm having similar problems to you all.  Chrome and Firefox will play YT videos back perfectly.  But for some reason certain users' entire channels that were working fine in Safari on Thhursday 1st Nov 2012 had stopped working by the next day!  After upgrading Flash and resetting the cache etc it was a bit better but still some not working.  I then downloaded the 6.0.2 update (again after a bit of aggro as some error message kept popping up, then after a while it worked ok).  Now still some videos refuse to play in Safari.  Latest FF browser seems OK and not too slow.  I have always liked Safari though and am a bit annoyed that I've had to to make FF my default as it's a bit ugly.  It may be a YT problem rather than Apple.  Once upon a time in the hazy crazy days of Tiger and Leopard I had no Apple problems.  Now lots of very minor but basic issues keep popping up! 

  • Insert a clip into a new sequence, the clip will not play back

    Macbookpro 8G ram twin 2.5 Intel, 1333 Mhz
    I am an experienced editor coming over from AVID.  This is my second project attempt in Premiere. First was fine. I imported clips that live on my hard drive.  When I make a clip selection, mark the in and out and "insert into a new sequence, the sequence will not play back un less I render it first. I am talking about one (1) shot maybe 3 seconds long.  I have done no other edits in the sequence and have added no effects but there is an effect icon on the clip in the sequence,  This can't be right. It is not the way it worked for my first test project.  It would take 40 hours to edit a 60 second spot…  What has happened here?
    Footage is 1080p 24fps.  Short with a digital DSLR and Files are the same (.mov)  as in the first project,

    I have exactly the same problem. All of a sudden preview window is not working properly. In some projects it only plays audio with gray screen, in some it doesn't plays at all or plays audio from another projects. Sometimes preview gets frozen with the first frame in the project. I can however play video from Event Library, but without any sound. When I create new project and drag clips from Library, it plays with gray screen and again without sound. Restarting iMovie or Mac is no help. I'm using iMovie 8.0.6
    Waiting for help desparatly, thank you

  • Images in iMovie not playing back

    I added an image to a project I had already been working on.  I then added an audio file to all of the images. When I hit the play button the image I added does not show in the playback but instead an image two away and then it plays the second and third fine. This happened to two images I inserted in the project.
    I noticed that the recently added images in iphoto when I click the camera icon have a green check mark in the corner.  What does that mean and is that stopping them from showing in the playback?
    I would appreciate any help.

    Fixed the issue myself. Here's a step-by-step because I what found online pertaining to this issue were not clear on how to fix it.  (Note that this is what I did to fix the problems, some of the steps might not be strictly necessary.)
    How to get movies to start playing back again in iMovie '09: 
    1.) Close iMovie.
    2.) Delete contents of the "iMovie Cache" folder for the event that is not playing back correctly.
             - There are were two files "Cache.mov" and "Cache.plist", I deleted both.
    3.) Restart iMovie
    This appeared to force the program to generate new files and start working correctly.  From what I read on other postings it was probably caused by the program not closing properly, which I seem to recall it crashing on me or my wife a while ago.
    @ Bengt Wärleby
    I appreciate you taking the time to post a reply, but please try to read the question before you do so in the future.  I had said that files imported from the same camera work correctly (i.e. the same file type/codec), so the problem is obviously not a codec issue.  Furthermore, .mov is the extension for the QuickTime File Format (http://en.wikipedia.org/wiki/.mov). 

  • Imovie not playing back video from one event

    Select vidoes in iMovie '09 won't play back for me.  All I get is a black box, no audio, no video.  The issue appears to be confined to videos from one particular event.  The preview shows up just fine, but no actual video. 
    The videos were taken and imported from the same Sony camera as the videos that do work.  They also play back fine in Quicktime.  The format is .mov.  Any ideas?

    Fixed the issue myself. Here's a step-by-step because I what found online pertaining to this issue were not clear on how to fix it.  (Note that this is what I did to fix the problems, some of the steps might not be strictly necessary.)
    How to get movies to start playing back again in iMovie '09: 
    1.) Close iMovie.
    2.) Delete contents of the "iMovie Cache" folder for the event that is not playing back correctly.
             - There are were two files "Cache.mov" and "Cache.plist", I deleted both.
    3.) Restart iMovie
    This appeared to force the program to generate new files and start working correctly.  From what I read on other postings it was probably caused by the program not closing properly, which I seem to recall it crashing on me or my wife a while ago.
    @ Bengt Wärleby
    I appreciate you taking the time to post a reply, but please try to read the question before you do so in the future.  I had said that files imported from the same camera work correctly (i.e. the same file type/codec), so the problem is obviously not a codec issue.  Furthermore, .mov is the extension for the QuickTime File Format (http://en.wikipedia.org/wiki/.mov). 

  • Hi Def video is jumpy and will not play back smoothly in FCPX

    I have the latest version of Final Cut Pro X only an older, but fully compatible IMac, and have a new Panasonic AG-Hmc 40P video camera. I have shot video on my Gro Prop Hero 2 and the playback of the unedited video is perfect, but as I scroll through the unedited footage shoot by the Panasonic, the video is jumpy and will not play back smoothly. The video plays perfectly on the the camera in play back mode, but in FCPX it is junk.
    Do I have an incorrect setting that is doing this? I adjusted the palynack in preference but that made no difference.  I need help?

    FYI...
    There's a hidden feature in Mac OS X Lion that you can use to convert your video footage to Apple ProRes with very little effort and to the right specifications...
    Bring your video footage into your desktop or hard drive and then select all of them, and then right-right click on one of them to bring up the options menu... select ENCODE SELECTED VIDEO FILES. Mac OS X will take care of the rest for you automatically.
    If this option doesn't show up, make sure to install those codecs I recommendad earlier...
    ProApps QuickTime Codecs v1.0.1
    http://support.apple.com/kb/DL1396

  • HT4528 iphone 5 - dock will charge but not play music.

    I've read and read and read posts about this same problem with no solution found.
    I have an iphone 5 that just randomly quit playing music through any docking accessories.  It will continue to charge, but not play music.  It worked when I first got it, but later just stopped.  Same docking accessories, same cables, same phone.  Nothing changed, just quit working.  My phone is not jailbroken.  I have restored it.  I updated to the ios7 software which fixed the problem... for a day.  Now we are back to it not working again! 
    Please, if anyone knows a way to fix this, help me!!!  This is the whole reason why I own an iphone.  It keeps me from having to have a seperate phone and ipod!!!
    Thank you in advance.

    Try unplugging the docking station from power for a minute or so, then also in that time, reset your phone by holding the power button and the home button until it turns off. Then turn it back on and try again.

  • Help with flash player 10.1 installed on Windows XP but not playing

    I have windows xp (not sure how many bits?), IE 7 (128-bit), service pack 3, shockwave add-on is enabled. Flash player 10.1 is installed, but not playing and not being recognized by the website that requires it in order to view a TV show.

    I am also having a similar issue.. When I open Youtube or any video related pages, my browser hangs.. Mine is 64bit Windows 7. No idea what is causing this issue..  tried re-installing.. But still no luck..  Please help..
    http://www.vouchercodes.net

Maybe you are looking for